| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Olivier Grenie | 10141 | 36.85% | 24 | 13.95% |
| Patrick Boettcher | 7951 | 28.89% | 29 | 16.86% |
| Mauro Carvalho Chehab | 3727 | 13.54% | 24 | 13.95% |
| Michael Ira Krufky | 1027 | 3.73% | 9 | 5.23% |
| Olivier DANET | 986 | 3.58% | 2 | 1.16% |
| Devin Heitmueller | 701 | 2.55% | 15 | 8.72% |
| Albert Comerma | 546 | 1.98% | 2 | 1.16% |
| Antti Palosaari | 456 | 1.66% | 1 | 0.58% |
| Olli Salonen | 399 | 1.45% | 1 | 0.58% |
| Jiri Slaby | 353 | 1.28% | 4 | 2.33% |
| Anton Blanchard | 172 | 0.62% | 1 | 0.58% |
| Nicolas Sugino | 147 | 0.53% | 1 | 0.58% |
| Davide Ferri | 122 | 0.44% | 1 | 0.58% |
| Daniel Gimpelevich | 100 | 0.36% | 1 | 0.58% |
| Sean Young | 76 | 0.28% | 1 | 0.58% |
| Ricardo Ribalda Delgado | 42 | 0.15% | 1 | 0.58% |
| David Härdeman | 36 | 0.13% | 2 | 1.16% |
| Al Viro | 36 | 0.13% | 1 | 0.58% |
| Arnd Bergmann | 34 | 0.12% | 1 | 0.58% |
| Andrey Konovalov | 24 | 0.09% | 1 | 0.58% |
| Michael Müller | 23 | 0.08% | 1 | 0.58% |
| Tomi Koivulahti | 21 | 0.08% | 1 | 0.58% |
| Tim Taubert | 20 | 0.07% | 1 | 0.58% |
| Pete Hildebrandt | 19 | 0.07% | 1 | 0.58% |
| Darren Salt | 18 | 0.07% | 2 | 1.16% |
| Joachim Steiger | 18 | 0.07% | 1 | 0.58% |
| Janne Grunau | 17 | 0.06% | 3 | 1.74% |
| Istvan Varga | 17 | 0.06% | 2 | 1.16% |
| Nicolas Fournier | 15 | 0.05% | 1 | 0.58% |
| Piotr Oleszczyk | 13 | 0.05% | 1 | 0.58% |
| Alejandro Torrado | 13 | 0.05% | 1 | 0.58% |
| Gianluca Gennari | 13 | 0.05% | 1 | 0.58% |
| Stéphane Elmaleh | 13 | 0.05% | 1 | 0.58% |
| dominik | 12 | 0.04% | 1 | 0.58% |
| Lukas Max Fisch | 12 | 0.04% | 1 | 0.58% |
| Yusuf Altin | 12 | 0.04% | 1 | 0.58% |
| tomas petr | 11 | 0.04% | 1 | 0.58% |
| Klaus Flittner | 11 | 0.04% | 1 | 0.58% |
| Armin Schenker | 11 | 0.04% | 1 | 0.58% |
| Finn Thain | 11 | 0.04% | 1 | 0.58% |
| sebastian.blanes@gmail.com | 11 | 0.04% | 1 | 0.58% |
| Xoan Loureiro | 11 | 0.04% | 1 | 0.58% |
| James A Webb | 11 | 0.04% | 1 | 0.58% |
| Wolfram Sang | 10 | 0.04% | 1 | 0.58% |
| Sergio C Fortier | 10 | 0.04% | 1 | 0.58% |
| Henning Schroeer | 10 | 0.04% | 1 | 0.58% |
| Chris Rankin | 10 | 0.04% | 1 | 0.58% |
| Stefan Traby | 9 | 0.03% | 1 | 0.58% |
| Daniel Oliveira Nascimento | 8 | 0.03% | 1 | 0.58% |
| Pascal Terjan | 7 | 0.03% | 1 | 0.58% |
| Alexander Simon | 6 | 0.02% | 1 | 0.58% |
| Michael Hunold | 6 | 0.02% | 2 | 1.16% |
| Yousef Lamlum | 5 | 0.02% | 1 | 0.58% |
| Harvey Harrison | 4 | 0.01% | 1 | 0.58% |
| Jose Carlos Garcia Sogo | 4 | 0.01% | 1 | 0.58% |
| Darryl Green | 4 | 0.01% | 1 | 0.58% |
| Johannes Stezenbach | 3 | 0.01% | 1 | 0.58% |
| Daniel W. S. Almeida | 2 | 0.01% | 1 | 0.58% |
| Alexey Dobriyan | 2 | 0.01% | 1 | 0.58% |
| Thomas Gleixner | 2 | 0.01% | 1 | 0.58% |
| Arne Luehrs | 2 | 0.01% | 1 | 0.58% |
| Gustavo A. R. Silva | 2 | 0.01% | 1 | 0.58% |
| Julia Lawall | 2 | 0.01% | 1 | 0.58% |
| Randy Dunlap | 2 | 0.01% | 1 | 0.58% |
| Colin Ian King | 1 | 0.00% | 1 | 0.58% |
| Total | 27520 | 172 |
// SPDX-License-Identifier: GPL-2.0-only /* Linux driver for devices based on the DiBcom DiB0700 USB bridge * * Copyright (C) 2005-9 DiBcom, SA et al */ #include "dib0700.h" #include "dib3000mc.h" #include "dib7000m.h" #include "dib7000p.h" #include "dib8000.h" #include "dib9000.h" #include "mt2060.h" #include "mt2266.h" #include "xc2028.h" #include "xc5000.h" #include "xc4000.h" #include "s5h1411.h" #include "dib0070.h" #include "dib0090.h" #include "lgdt3305.h" #include "mxl5007t.h" #include "mn88472.h" #include "tda18250.h" static int force_lna_activation; module_param(force_lna_activation, int, 0644); MODULE_PARM_DESC(force_lna_activation, "force the activation of Low-Noise-Amplifier(s) (LNA), if applicable for the device (default: 0=automatic/off)."); struct dib0700_adapter_state { int (*set_param_save) (struct dvb_frontend *); const struct firmware *frontend_firmware; struct dib7000p_ops dib7000p_ops; struct dib8000_ops dib8000_ops; }; /* Hauppauge Nova-T 500 (aka Bristol) * has a LNA on GPIO0 which is enabled by setting 1 */ static struct mt2060_config bristol_mt2060_config[2] = { { .i2c_address = 0x60, .clock_out = 3, }, { .i2c_address = 0x61, } }; static struct dibx000_agc_config bristol_dib3000p_mt2060_agc_config = { .band_caps = BAND_VHF | BAND_UHF, .setup = (1 << 8) | (5 << 5) | (0 << 4) | (0 << 3) | (0 << 2) | (2 << 0), .agc1_max = 42598, .agc1_min = 17694, .agc2_max = 45875, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 59, .agc1_slope1 = 0, .agc1_slope2 = 69, .agc2_pt1 = 0, .agc2_pt2 = 59, .agc2_slope1 = 111, .agc2_slope2 = 28, }; static struct dib3000mc_config bristol_dib3000mc_config[2] = { { .agc = &bristol_dib3000p_mt2060_agc_config, .max_time = 0x196, .ln_adc_level = 0x1cc7, .output_mpeg2_in_188_bytes = 1, }, { .agc = &bristol_dib3000p_mt2060_agc_config, .max_time = 0x196, .ln_adc_level = 0x1cc7, .output_mpeg2_in_188_bytes = 1, } }; static int bristol_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; if (adap->id == 0) { dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); if (force_lna_activation) dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); else dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); if (dib3000mc_i2c_enumeration(&adap->dev->i2c_adap, 2, DEFAULT_DIB3000P_I2C_ADDRESS, bristol_dib3000mc_config) != 0) { dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(10); return -ENODEV; } } st->mt2060_if1[adap->id] = 1220; return (adap->fe_adap[0].fe = dvb_attach(dib3000mc_attach, &adap->dev->i2c_adap, (10 + adap->id) << 1, &bristol_dib3000mc_config[adap->id])) == NULL ? -ENODEV : 0; } static int eeprom_read(struct i2c_adapter *adap,u8 adrs,u8 *pval) { struct i2c_msg msg[2] = { { .addr = 0x50, .flags = 0, .buf = &adrs, .len = 1 }, { .addr = 0x50, .flags = I2C_M_RD, .buf = pval, .len = 1 }, }; if (i2c_transfer(adap, msg, 2) != 2) return -EREMOTEIO; return 0; } static int bristol_tuner_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe_adap[0].fe, 1); s8 a; int if1=1220; if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &bristol_mt2060_config[adap->id], if1) == NULL ? -ENODEV : 0; } /* STK7700D: Pinnacle/Terratec/Hauppauge Dual DVB-T Diversity */ /* MT226x */ static struct dibx000_agc_config stk7700d_7000p_mt2266_agc_config[2] = { { BAND_UHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), 1130, 21, 0, 118, 0, 3530, 1, 0, 65535, 33770, 65535, 23592, 0, 62, 255, 64, 64, 132, 192, 80, 80, 17, 27, 23, 51, 1, }, { BAND_VHF | BAND_LBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=1, P_agc_inv_pwm2=1, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ (0 << 15) | (0 << 14) | (1 << 11) | (1 << 10) | (1 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), 2372, 21, 0, 118, 0, 3530, 1, 0, 65535, 0, 65535, 23592, 0, 128, 128, 128, 0, 128, 253, 81, 0, 17, 27, 23, 51, 1, } }; static struct dibx000_bandwidth_config stk7700d_mt2266_pll_config = { .internal = 60000, .sampling = 30000, .pll_prediv = 1, .pll_ratio = 8, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), .ifreq = 0, .timf = 20452225, }; static struct dib7000p_config stk7700d_dib7000p_mt2266_config[] = { { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .agc_config_count = 2, .agc = stk7700d_7000p_mt2266_agc_config, .bw = &stk7700d_mt2266_pll_config, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, }, { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .agc_config_count = 2, .agc = stk7700d_7000p_mt2266_agc_config, .bw = &stk7700d_mt2266_pll_config, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, } }; static struct mt2266_config stk7700d_mt2266_config[2] = { { .i2c_address = 0x60 }, { .i2c_address = 0x60 } }; static int stk7700P2_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (adap->id == 0) { dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80 + (adap->id << 1), &stk7700d_dib7000p_mt2266_config[adap->id]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk7700d_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (adap->id == 0) { dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, stk7700d_dib7000p_mt2266_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80 + (adap->id << 1), &stk7700d_dib7000p_mt2266_config[adap->id]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk7700d_tuner_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *tun_i2c; struct dib0700_adapter_state *state = adap->priv; tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); return dvb_attach(mt2266_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700d_mt2266_config[adap->id]) == NULL ? -ENODEV : 0; } /* STK7700-PH: Digital/Analog Hybrid Tuner, e.h. Cinergy HT USB HE */ static struct dibx000_agc_config xc3028_agc_config = { .band_caps = BAND_VHF | BAND_UHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), .inv_gain = 712, .time_stabiliz = 21, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 2867, .wbd_sel = 0, .wbd_alpha = 2, .agc1_max = 0, .agc1_min = 0, .agc2_max = 39718, .agc2_min = 9930, .agc1_pt1 = 0, .agc1_pt2 = 0, .agc1_pt3 = 0, .agc1_slope1 = 0, .agc1_slope2 = 0, .agc2_pt1 = 0, .agc2_pt2 = 128, .agc2_slope1 = 29, .agc2_slope2 = 29, .alpha_mant = 17, .alpha_exp = 27, .beta_mant = 23, .beta_exp = 51, .perform_agc_softsplit = 1, }; /* PLL Configuration for COFDM BW_MHz = 8.00 with external clock = 30.00 */ static struct dibx000_bandwidth_config xc3028_bw_config = { .internal = 60000, .sampling = 30000, .pll_prediv = 1, .pll_ratio = 8, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 0, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ .ifreq = (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ .timf = 20452225, .xtal_hz = 30000000, }; static struct dib7000p_config stk7700ph_dib7700_xc3028_config = { .output_mpeg2_in_188_bytes = 1, .tuner_is_baseband = 1, .agc_config_count = 1, .agc = &xc3028_agc_config, .bw = &xc3028_bw_config, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, }; static int stk7700ph_xc3028_callback(void *ptr, int component, int command, int arg) { struct dvb_usb_adapter *adap = ptr; struct dib0700_adapter_state *state = adap->priv; switch (command) { case XC2028_TUNER_RESET: /* Send the tuner in then out of reset */ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10); state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); break; case XC2028_RESET_CLK: case XC2028_I2C_FLUSH: break; default: err("%s: unknown command %d, arg %d\n", __func__, command, arg); return -EINVAL; } return 0; } static struct xc2028_ctrl stk7700ph_xc3028_ctrl = { .fname = XC2028_DEFAULT_FIRMWARE, .max_len = 64, .demod = XC3028_FE_DIBCOM52, }; static struct xc2028_config stk7700ph_xc3028_config = { .i2c_addr = 0x61, .ctrl = &stk7700ph_xc3028_ctrl, }; static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); msleep(10); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &stk7700ph_dib7700_xc3028_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7700ph_dib7700_xc3028_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *tun_i2c; struct dib0700_adapter_state *state = adap->priv; tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); stk7700ph_xc3028_config.i2c_adap = tun_i2c; /* FIXME: generalize & move to common area */ adap->fe_adap[0].fe->callback = stk7700ph_xc3028_callback; return dvb_attach(xc2028_attach, adap->fe_adap[0].fe, &stk7700ph_xc3028_config) == NULL ? -ENODEV : 0; } #define DEFAULT_RC_INTERVAL 50 /* * This function is used only when firmware is < 1.20 version. Newer * firmwares use bulk mode, with functions implemented at dib0700_core, * at dib0700_rc_urb_completion() */ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) { enum rc_proto protocol; u32 scancode; u8 toggle; int i; struct dib0700_state *st = d->priv; if (st->fw_version >= 0x10200) { /* For 1.20 firmware , We need to keep the RC polling callback so we can reuse the input device setup in dvb-usb-remote.c. However, the actual work is being done in the bulk URB completion handler. */ return 0; } st->buf[0] = REQUEST_POLL_RC; st->buf[1] = 0; i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4); if (i <= 0) { err("RC Query Failed"); return -EIO; } /* losing half of KEY_0 events from Philipps rc5 remotes.. */ if (st->buf[0] == 0 && st->buf[1] == 0 && st->buf[2] == 0 && st->buf[3] == 0) return 0; /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]); */ dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */ switch (d->props.rc.core.protocol) { case RC_PROTO_BIT_NEC: /* NEC protocol sends repeat code as 0 0 0 FF */ if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) && (st->buf[3] == 0xff)) { rc_repeat(d->rc_dev); return 0; } protocol = RC_PROTO_NEC; scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]); toggle = 0; break; default: /* RC-5 protocol changes toggle bit on new keypress */ protocol = RC_PROTO_RC5; scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]); toggle = st->buf[3 - 1]; break; } rc_keydown(d->rc_dev, protocol, scancode, toggle); return 0; } /* STK7700P: Hauppauge Nova-T Stick, AVerMedia Volar */ static struct dibx000_agc_config stk7700p_7000m_mt2060_agc_config = { BAND_UHF | BAND_VHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), 712, 41, 0, 118, 0, 4095, 0, 0, 42598, 17694, 45875, 2621, 0, 76, 139, 52, 59, 107, 172, 57, 70, 21, 25, 28, 48, 1, { 0, 107, 51800, 24700 }, }; static struct dibx000_agc_config stk7700p_7000p_mt2060_agc_config = { .band_caps = BAND_UHF | BAND_VHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=2, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), .inv_gain = 712, .time_stabiliz = 41, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 4095, .wbd_sel = 0, .wbd_alpha = 0, .agc1_max = 42598, .agc1_min = 16384, .agc2_max = 42598, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 137, .agc1_pt3 = 255, .agc1_slope1 = 0, .agc1_slope2 = 255, .agc2_pt1 = 0, .agc2_pt2 = 0, .agc2_slope1 = 0, .agc2_slope2 = 41, .alpha_mant = 15, .alpha_exp = 25, .beta_mant = 28, .beta_exp = 48, .perform_agc_softsplit = 0, }; static struct dibx000_bandwidth_config stk7700p_pll_config = { .internal = 60000, .sampling = 30000, .pll_prediv = 1, .pll_ratio = 8, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 0, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), .ifreq = 60258167, .timf = 20452225, .xtal_hz = 30000000, }; static struct dib7000m_config stk7700p_dib7000m_config = { .dvbt_mode = 1, .output_mpeg2_in_188_bytes = 1, .quartz_direct = 1, .agc_config_count = 1, .agc = &stk7700p_7000m_mt2060_agc_config, .bw = &stk7700p_pll_config, .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, }; static struct dib7000p_config stk7700p_dib7000p_config = { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &stk7700p_7000p_mt2060_agc_config, .bw = &stk7700p_pll_config, .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, }; static int stk7700p_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; /* unless there is no real power management in DVB - we leave the device on GPIO6 */ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(10); dib0700_ctrl_clock(adap->dev, 72, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(100); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); st->mt2060_if1[0] = 1220; if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap)) { adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 18, &stk7700p_dib7000p_config); st->is_dib7000pc = 1; } else { memset(&state->dib7000p_ops, 0, sizeof(state->dib7000p_ops)); adap->fe_adap[0].fe = dvb_attach(dib7000m_attach, &adap->dev->i2c_adap, 18, &stk7700p_dib7000m_config); } return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static struct mt2060_config stk7700p_mt2060_config = { 0x60 }; static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *prim_i2c = &adap->dev->i2c_adap; struct dib0700_state *st = adap->dev->priv; struct i2c_adapter *tun_i2c; struct dib0700_adapter_state *state = adap->priv; s8 a; int if1=1220; if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); else tun_i2c = dib7000m_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); return dvb_attach(mt2060_attach, adap->fe_adap[0].fe, tun_i2c, &stk7700p_mt2060_config, if1) == NULL ? -ENODEV : 0; } /* DIB7070 generic */ static struct dibx000_agc_config dib7070_agc_config = { .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=5, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 600, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 3530, .wbd_sel = 1, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 0, .agc2_max = 65535, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 40, .agc1_pt3 = 183, .agc1_slope1 = 206, .agc1_slope2 = 255, .agc2_pt1 = 72, .agc2_pt2 = 152, .agc2_slope1 = 88, .agc2_slope2 = 90, .alpha_mant = 17, .alpha_exp = 27, .beta_mant = 23, .beta_exp = 51, .perform_agc_softsplit = 0, }; static int dib7070_tuner_reset(struct dvb_frontend *fe, int onoff) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; deb_info("reset: %d", onoff); return state->dib7000p_ops.set_gpio(fe, 8, 0, !onoff); } static int dib7070_tuner_sleep(struct dvb_frontend *fe, int onoff) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; deb_info("sleep: %d", onoff); return state->dib7000p_ops.set_gpio(fe, 9, 0, onoff); } static struct dib0070_config dib7070p_dib0070_config[2] = { { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib7070_tuner_reset, .sleep = dib7070_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 4, .charge_pump = 2, }, { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib7070_tuner_reset, .sleep = dib7070_tuner_sleep, .clock_khz = 12000, .charge_pump = 2, } }; static struct dib0070_config dib7770p_dib0070_config = { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib7070_tuner_reset, .sleep = dib7070_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 0, .flip_chip = 1, .charge_pump = 2, }; static int dib7070_set_param_override(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; u16 offset; u8 band = BAND_OF_FREQUENCY(p->frequency/1000); switch (band) { case BAND_VHF: offset = 950; break; case BAND_UHF: default: offset = 550; break; } deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); return state->set_param_save(fe); } static int dib7770_set_param_override(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; u16 offset; u8 band = BAND_OF_FREQUENCY(p->frequency/1000); switch (band) { case BAND_VHF: state->dib7000p_ops.set_gpio(fe, 0, 0, 1); offset = 850; break; case BAND_UHF: default: state->dib7000p_ops.set_gpio(fe, 0, 0, 0); offset = 250; break; } deb_info("WBD for DiB7000P: %d\n", offset + dib0070_wbd_offset(fe)); state->dib7000p_ops.set_wbd_ref(fe, offset + dib0070_wbd_offset(fe)); return state->set_param_save(fe); } static int dib7770p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7770p_dib0070_config) == NULL) return -ENODEV; st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7770_set_param_override; return 0; } static int dib7070p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); if (adap->id == 0) { if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[0]) == NULL) return -ENODEV; } else { if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib7070p_dib0070_config[1]) == NULL) return -ENODEV; } st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7070_set_param_override; return 0; } static int stk7700p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) { struct dib0700_adapter_state *state = adapter->priv; struct dib0700_state *st = adapter->dev->priv; if (st->is_dib7000pc) return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); return dib7000m_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); } static int stk7700p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) { struct dib0700_state *st = adapter->dev->priv; struct dib0700_adapter_state *state = adapter->priv; if (st->is_dib7000pc) return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); return dib7000m_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); } static int stk70x0p_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) { struct dib0700_adapter_state *state = adapter->priv; return state->dib7000p_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); } static int stk70x0p_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) { struct dib0700_adapter_state *state = adapter->priv; return state->dib7000p_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); } static struct dibx000_bandwidth_config dib7070_bw_config_12_mhz = { .internal = 60000, .sampling = 15000, .pll_prediv = 1, .pll_ratio = 20, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), .ifreq = (0 << 25) | 0, .timf = 20452225, .xtal_hz = 12000000, }; static struct dib7000p_config dib7070p_dib7000p_config = { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, .tuner_is_baseband = 1, .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, }; /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *p = &adap->dev->udev->descriptor; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &dib7070p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &dib7070p_dib7000p_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } /* STK7770P */ static struct dib7000p_config dib7770p_dib7000p_config = { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, .tuner_is_baseband = 1, .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, .enable_current_mirror = 1, .disable_sample_and_hold = 0, }; static int stk7770p_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *p = &adap->dev->udev->descriptor; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, &dib7770p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &dib7770p_dib7000p_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } /* DIB807x generic */ static struct dibx000_agc_config dib807x_agc_config[2] = { { BAND_VHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, * P_agc_inv_pwm2=0,P_agc_inh_dc_rv_est=0, * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, * P_agc_write=0 */ (0 << 15) | (0 << 14) | (7 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), /* setup*/ 600, /* inv_gain*/ 10, /* time_stabiliz*/ 0, /* alpha_level*/ 118, /* thlock*/ 0, /* wbd_inv*/ 3530, /* wbd_ref*/ 1, /* wbd_sel*/ 5, /* wbd_alpha*/ 65535, /* agc1_max*/ 0, /* agc1_min*/ 65535, /* agc2_max*/ 0, /* agc2_min*/ 0, /* agc1_pt1*/ 40, /* agc1_pt2*/ 183, /* agc1_pt3*/ 206, /* agc1_slope1*/ 255, /* agc1_slope2*/ 72, /* agc2_pt1*/ 152, /* agc2_pt2*/ 88, /* agc2_slope1*/ 90, /* agc2_slope2*/ 17, /* alpha_mant*/ 27, /* alpha_exp*/ 23, /* beta_mant*/ 51, /* beta_exp*/ 0, /* perform_agc_softsplit*/ }, { BAND_UHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, * P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, * P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, * P_agc_write=0 */ (0 << 15) | (0 << 14) | (1 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), /* setup */ 600, /* inv_gain*/ 10, /* time_stabiliz*/ 0, /* alpha_level*/ 118, /* thlock*/ 0, /* wbd_inv*/ 3530, /* wbd_ref*/ 1, /* wbd_sel*/ 5, /* wbd_alpha*/ 65535, /* agc1_max*/ 0, /* agc1_min*/ 65535, /* agc2_max*/ 0, /* agc2_min*/ 0, /* agc1_pt1*/ 40, /* agc1_pt2*/ 183, /* agc1_pt3*/ 206, /* agc1_slope1*/ 255, /* agc1_slope2*/ 72, /* agc2_pt1*/ 152, /* agc2_pt2*/ 88, /* agc2_slope1*/ 90, /* agc2_slope2*/ 17, /* alpha_mant*/ 27, /* alpha_exp*/ 23, /* beta_mant*/ 51, /* beta_exp*/ 0, /* perform_agc_softsplit*/ } }; static struct dibx000_bandwidth_config dib807x_bw_config_12_mhz = { .internal = 60000, .sampling = 15000, .pll_prediv = 1, .pll_ratio = 20, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0), /* sad_cfg: refsel, sel, freq_15k*/ .ifreq = (0 << 25) | 0, /* ifreq = 0.000000 MHz*/ .timf = 18179755, .xtal_hz = 12000000, }; static struct dib8000_config dib807x_dib8000_config[2] = { { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 2, .agc = dib807x_agc_config, .pll = &dib807x_bw_config_12_mhz, .tuner_is_baseband = 1, .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, .div_cfg = 1, .agc_control = &dib0070_ctrl_agc_filter, .output_mode = OUTMODE_MPEG2_FIFO, .drives = 0x2d98, }, { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 2, .agc = dib807x_agc_config, .pll = &dib807x_bw_config_12_mhz, .tuner_is_baseband = 1, .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, .agc_control = &dib0070_ctrl_agc_filter, .output_mode = OUTMODE_MPEG2_FIFO, .drives = 0x2d98, } }; static int dib80xx_tuner_reset(struct dvb_frontend *fe, int onoff) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; return state->dib8000_ops.set_gpio(fe, 5, 0, !onoff); } static int dib80xx_tuner_sleep(struct dvb_frontend *fe, int onoff) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; return state->dib8000_ops.set_gpio(fe, 0, 0, onoff); } static const struct dib0070_wbd_gain_cfg dib8070_wbd_gain_cfg[] = { { 240, 7}, { 0xffff, 6}, }; static struct dib0070_config dib807x_dib0070_config[2] = { { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib80xx_tuner_reset, .sleep = dib80xx_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 4, .vga_filter = 1, .force_crystal_mode = 1, .enable_third_order_filter = 1, .charge_pump = 0, .wbd_gain = dib8070_wbd_gain_cfg, .osc_buffer_state = 0, .freq_offset_khz_uhf = -100, .freq_offset_khz_vhf = -100, }, { .i2c_address = DEFAULT_DIB0070_I2C_ADDRESS, .reset = dib80xx_tuner_reset, .sleep = dib80xx_tuner_sleep, .clock_khz = 12000, .clock_pad_drive = 2, .vga_filter = 1, .force_crystal_mode = 1, .enable_third_order_filter = 1, .charge_pump = 0, .wbd_gain = dib8070_wbd_gain_cfg, .osc_buffer_state = 0, .freq_offset_khz_uhf = -25, .freq_offset_khz_vhf = -25, } }; static int dib807x_set_param_override(struct dvb_frontend *fe) { struct dtv_frontend_properties *p = &fe->dtv_property_cache; struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; u16 offset = dib0070_wbd_offset(fe); u8 band = BAND_OF_FREQUENCY(p->frequency/1000); switch (band) { case BAND_VHF: offset += 750; break; case BAND_UHF: /* fall-thru wanted */ default: offset += 250; break; } deb_info("WBD for DiB8000: %d\n", offset); state->dib8000_ops.set_wbd_ref(fe, offset); return state->set_param_save(fe); } static int dib807x_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); if (adap->id == 0) { if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib807x_dib0070_config[0]) == NULL) return -ENODEV; } else { if (dvb_attach(dib0070_attach, adap->fe_adap[0].fe, tun_i2c, &dib807x_dib0070_config[1]) == NULL) return -ENODEV; } st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib807x_set_param_override; return 0; } static int stk80xx_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) { struct dib0700_adapter_state *state = adapter->priv; return state->dib8000_ops.pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); } static int stk80xx_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) { struct dib0700_adapter_state *state = adapter->priv; return state->dib8000_ops.pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); } /* STK807x */ static int stk807x_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib807x_dib8000_config[0]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } /* STK807xPVR */ static int stk807xpvr_frontend_attach0(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(30); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(500); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); /* initialize IC 0 */ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x22, 0x80, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib807x_dib8000_config[0]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk807xpvr_frontend_attach1(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; /* initialize IC 1 */ state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x12, 0x82, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib807x_dib8000_config[1]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } /* STK8096GP */ static struct dibx000_agc_config dib8090_agc_config[2] = { { .band_caps = BAND_UHF | BAND_VHF | BAND_LBAND | BAND_SBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 787, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 3530, .wbd_sel = 1, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 0, .agc2_max = 65535, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 32, .agc1_pt3 = 114, .agc1_slope1 = 143, .agc1_slope2 = 144, .agc2_pt1 = 114, .agc2_pt2 = 227, .agc2_slope1 = 116, .agc2_slope2 = 117, .alpha_mant = 28, .alpha_exp = 26, .beta_mant = 31, .beta_exp = 51, .perform_agc_softsplit = 0, }, { .band_caps = BAND_CBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, * P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 787, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 3530, .wbd_sel = 1, .wbd_alpha = 5, .agc1_max = 0, .agc1_min = 0, .agc2_max = 65535, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 32, .agc1_pt3 = 114, .agc1_slope1 = 143, .agc1_slope2 = 144, .agc2_pt1 = 114, .agc2_pt2 = 227, .agc2_slope1 = 116, .agc2_slope2 = 117, .alpha_mant = 28, .alpha_exp = 26, .beta_mant = 31, .beta_exp = 51, .perform_agc_softsplit = 0, } }; static struct dibx000_bandwidth_config dib8090_pll_config_12mhz = { .internal = 54000, .sampling = 13500, .pll_prediv = 1, .pll_ratio = 18, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (599 << 0), .ifreq = (0 << 25) | 0, .timf = 20199727, .xtal_hz = 12000000, }; static int dib8090_get_adc_power(struct dvb_frontend *fe) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; return state->dib8000_ops.get_adc_power(fe, 1); } static void dib8090_agc_control(struct dvb_frontend *fe, u8 restart) { deb_info("AGC control callback: %i\n", restart); dib0090_dcc_freq(fe, restart); if (restart == 0) /* before AGC startup */ dib0090_set_dc_servo(fe, 1); } static struct dib8000_config dib809x_dib8000_config[2] = { { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 2, .agc = dib8090_agc_config, .agc_control = dib8090_agc_control, .pll = &dib8090_pll_config_12mhz, .tuner_is_baseband = 1, .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, .div_cfg = 0x31, .output_mode = OUTMODE_MPEG2_FIFO, .drives = 0x2d98, .diversity_delay = 48, .refclksel = 3, }, { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 2, .agc = dib8090_agc_config, .agc_control = dib8090_agc_control, .pll = &dib8090_pll_config_12mhz, .tuner_is_baseband = 1, .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, .div_cfg = 0x31, .output_mode = OUTMODE_DIVERSITY, .drives = 0x2d08, .diversity_delay = 1, .refclksel = 3, } }; static struct dib0090_wbd_slope dib8090_wbd_table[] = { /* max freq ; cold slope ; cold offset ; warm slope ; warm offset ; wbd gain */ { 120, 0, 500, 0, 500, 4 }, /* CBAND */ { 170, 0, 450, 0, 450, 4 }, /* CBAND */ { 380, 48, 373, 28, 259, 6 }, /* VHF */ { 860, 34, 700, 36, 616, 6 }, /* high UHF */ { 0xFFFF, 34, 700, 36, 616, 6 }, /* default */ }; static struct dib0090_config dib809x_dib0090_config = { .io.pll_bypass = 1, .io.pll_range = 1, .io.pll_prediv = 1, .io.pll_loopdiv = 20, .io.adc_clock_ratio = 8, .io.pll_int_loop_filt = 0, .io.clock_khz = 12000, .reset = dib80xx_tuner_reset, .sleep = dib80xx_tuner_sleep, .clkouttobamse = 1, .analog_output = 1, .i2c_address = DEFAULT_DIB0090_I2C_ADDRESS, .use_pwm_agc = 1, .clkoutdrive = 1, .get_adc_power = dib8090_get_adc_power, .freq_offset_khz_uhf = -63, .freq_offset_khz_vhf = -143, .wbd = dib8090_wbd_table, .fref_clock_ratio = 6, }; static u8 dib8090_compute_pll_parameters(struct dvb_frontend *fe) { u8 optimal_pll_ratio = 20; u32 freq_adc, ratio, rest, max = 0; u8 pll_ratio; for (pll_ratio = 17; pll_ratio <= 20; pll_ratio++) { freq_adc = 12 * pll_ratio * (1 << 8) / 16; ratio = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) / freq_adc; rest = ((fe->dtv_property_cache.frequency / 1000) * (1 << 8) / 1000) - ratio * freq_adc; if (rest > freq_adc / 2) rest = freq_adc - rest; deb_info("PLL ratio=%i rest=%i\n", pll_ratio, rest); if ((rest > max) && (rest > 717)) { optimal_pll_ratio = pll_ratio; max = rest; } } deb_info("optimal PLL ratio=%i\n", optimal_pll_ratio); return optimal_pll_ratio; } static int dib8096_set_param_override(struct dvb_frontend *fe) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; u8 pll_ratio, band = BAND_OF_FREQUENCY(fe->dtv_property_cache.frequency / 1000); u16 target, ltgain, rf_gain_limit; u32 timf; int ret = 0; enum frontend_tune_state tune_state = CT_SHUTDOWN; switch (band) { default: deb_info("Warning : Rf frequency (%iHz) is not in the supported range, using VHF switch ", fe->dtv_property_cache.frequency); fallthrough; case BAND_VHF: state->dib8000_ops.set_gpio(fe, 3, 0, 1); break; case BAND_UHF: state->dib8000_ops.set_gpio(fe, 3, 0, 0); break; } ret = state->set_param_save(fe); if (ret < 0) return ret; if (fe->dtv_property_cache.bandwidth_hz != 6000000) { deb_info("only 6MHz bandwidth is supported\n"); return -EINVAL; } /* Update PLL if needed ratio */ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, 0); /* Get optimize PLL ratio to remove spurious */ pll_ratio = dib8090_compute_pll_parameters(fe); if (pll_ratio == 17) timf = 21387946; else if (pll_ratio == 18) timf = 20199727; else if (pll_ratio == 19) timf = 19136583; else timf = 18179756; /* Update ratio */ state->dib8000_ops.update_pll(fe, &dib8090_pll_config_12mhz, fe->dtv_property_cache.bandwidth_hz / 1000, pll_ratio); state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, timf); if (band != BAND_CBAND) { /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */ target = (dib0090_get_wbd_target(fe) * 8 * 18 / 33 + 1) / 2; state->dib8000_ops.set_wbd_ref(fe, target); } if (band == BAND_CBAND) { deb_info("tuning in CBAND - soft-AGC startup\n"); dib0090_set_tune_state(fe, CT_AGC_START); do { ret = dib0090_gain_control(fe); msleep(ret); tune_state = dib0090_get_tune_state(fe); if (tune_state == CT_AGC_STEP_0) state->dib8000_ops.set_gpio(fe, 6, 0, 1); else if (tune_state == CT_AGC_STEP_1) { dib0090_get_current_gain(fe, NULL, NULL, &rf_gain_limit, <gain); if (rf_gain_limit < 2000) /* activate the external attenuator in case of very high input power */ state->dib8000_ops.set_gpio(fe, 6, 0, 0); } } while (tune_state < CT_AGC_STOP); deb_info("switching to PWM AGC\n"); dib0090_pwm_gain_reset(fe); state->dib8000_ops.pwm_agc_reset(fe); state->dib8000_ops.set_tune_state(fe, CT_DEMOD_START); } else { /* for everything else than CBAND we are using standard AGC */ deb_info("not tuning in CBAND - standard AGC startup\n"); dib0090_pwm_gain_reset(fe); } return 0; } static int dib809x_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); /* FIXME: if adap->id != 0, check if it is fe_adap[1] */ if (!dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config)) return -ENODEV; st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; return 0; } static int stk809x_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 18, 0x80, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk809x_frontend1_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x82, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int nim8096md_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c; struct dvb_frontend *fe_slave = st->dib8000_ops.get_slave_frontend(adap->fe_adap[0].fe, 1); if (fe_slave) { tun_i2c = st->dib8000_ops.get_i2c_master(fe_slave, DIBX000_I2C_INTERFACE_TUNER, 1); if (dvb_attach(dib0090_register, fe_slave, tun_i2c, &dib809x_dib0090_config) == NULL) return -ENODEV; fe_slave->dvb = adap->fe_adap[0].fe->dvb; fe_slave->ops.tuner_ops.set_params = dib8096_set_param_override; } tun_i2c = st->dib8000_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &dib809x_dib0090_config) == NULL) return -ENODEV; st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096_set_param_override; return 0; } static int nim8096md_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_frontend *fe_slave; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(20); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(1000); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, 0x80, 0); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &dib809x_dib8000_config[0]); if (adap->fe_adap[0].fe == NULL) return -ENODEV; /* Needed to increment refcount */ if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; fe_slave = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x82, &dib809x_dib8000_config[1]); state->dib8000_ops.set_slave_frontend(adap->fe_adap[0].fe, fe_slave); return fe_slave == NULL ? -ENODEV : 0; } /* TFE8096P */ static struct dibx000_agc_config dib8096p_agc_config[2] = { { .band_caps = BAND_UHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 684, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 1200, .wbd_sel = 3, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 0, .agc2_max = 32767, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 0, .agc1_pt3 = 105, .agc1_slope1 = 0, .agc1_slope2 = 156, .agc2_pt1 = 105, .agc2_pt2 = 255, .agc2_slope1 = 54, .agc2_slope2 = 0, .alpha_mant = 28, .alpha_exp = 26, .beta_mant = 31, .beta_exp = 51, .perform_agc_softsplit = 0, } , { .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 732, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 1200, .wbd_sel = 3, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 0, .agc2_max = 32767, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 0, .agc1_pt3 = 98, .agc1_slope1 = 0, .agc1_slope2 = 167, .agc2_pt1 = 98, .agc2_pt2 = 255, .agc2_slope1 = 52, .agc2_slope2 = 0, .alpha_mant = 28, .alpha_exp = 26, .beta_mant = 31, .beta_exp = 51, .perform_agc_softsplit = 0, } }; static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = { .internal = 108000, .sampling = 13500, .pll_prediv = 1, .pll_ratio = 9, .pll_range = 1, .pll_reset = 0, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 0, .ADClkSrc = 0, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), .ifreq = (0 << 25) | 0, .timf = 20199729, .xtal_hz = 12000000, }; static struct dib8000_config tfe8096p_dib8000_config = { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .update_lna = NULL, .agc_config_count = 2, .agc = dib8096p_agc_config, .pll = &dib8096p_clock_config_12_mhz, .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB8000_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS, .agc_control = NULL, .diversity_delay = 48, .output_mode = OUTMODE_MPEG2_FIFO, .enMpegOutput = 1, }; static struct dib0090_wbd_slope dib8096p_wbd_table[] = { { 380, 81, 850, 64, 540, 4}, { 860, 51, 866, 21, 375, 4}, {1700, 0, 250, 0, 100, 6}, {2600, 0, 250, 0, 100, 6}, { 0xFFFF, 0, 0, 0, 0, 0}, }; static struct dib0090_config tfe8096p_dib0090_config = { .io.clock_khz = 12000, .io.pll_bypass = 0, .io.pll_range = 0, .io.pll_prediv = 3, .io.pll_loopdiv = 6, .io.adc_clock_ratio = 0, .io.pll_int_loop_filt = 0, .freq_offset_khz_uhf = -143, .freq_offset_khz_vhf = -143, .get_adc_power = dib8090_get_adc_power, .clkouttobamse = 1, .analog_output = 0, .wbd_vhf_offset = 0, .wbd_cband_offset = 0, .use_pwm_agc = 1, .clkoutdrive = 0, .fref_clock_ratio = 1, .ls_cfg_pad_drv = 0, .data_tx_drv = 0, .low_if = NULL, .in_soc = 1, .force_cband_input = 0, }; struct dibx090p_best_adc { u32 timf; u32 pll_loopdiv; u32 pll_prediv; }; static int dib8096p_get_best_sampling(struct dvb_frontend *fe, struct dibx090p_best_adc *adc) { u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; u16 xtal = 12000; u16 fcp_min = 1900; /* PLL, Minimum Frequency of phase comparator (KHz) */ u16 fcp_max = 20000; /* PLL, Maximum Frequency of phase comparator (KHz) */ u32 fmem_max = 140000; /* 140MHz max SDRAM freq */ u32 fdem_min = 66000; u32 fcp = 0, fs = 0, fdem = 0, fmem = 0; u32 harmonic_id = 0; adc->timf = 0; adc->pll_loopdiv = loopdiv; adc->pll_prediv = prediv; deb_info("bandwidth = %d", fe->dtv_property_cache.bandwidth_hz); /* Find Min and Max prediv */ while ((xtal / max_prediv) >= fcp_min) max_prediv++; max_prediv--; min_prediv = max_prediv; while ((xtal / min_prediv) <= fcp_max) { min_prediv--; if (min_prediv == 1) break; } deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); min_prediv = 1; for (prediv = min_prediv; prediv < max_prediv; prediv++) { fcp = xtal / prediv; if (fcp > fcp_min && fcp < fcp_max) { for (loopdiv = 1; loopdiv < 64; loopdiv++) { fmem = ((xtal/prediv) * loopdiv); fdem = fmem / 2; fs = fdem / 4; /* test min/max system restrictions */ if ((fdem >= fdem_min) && (fmem <= fmem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz / 1000)) { spur = 0; /* test fs harmonics positions */ for (harmonic_id = (fe->dtv_property_cache.frequency / (1000 * fs)); harmonic_id <= ((fe->dtv_property_cache.frequency / (1000 * fs)) + 1); harmonic_id++) { if (((fs * harmonic_id) >= (fe->dtv_property_cache.frequency / 1000 - (fe->dtv_property_cache.bandwidth_hz / 2000))) && ((fs * harmonic_id) <= (fe->dtv_property_cache.frequency / 1000 + (fe->dtv_property_cache.bandwidth_hz / 2000)))) { spur = 1; break; } } if (!spur) { adc->pll_loopdiv = loopdiv; adc->pll_prediv = prediv; adc->timf = (4260880253U / fdem) * (1 << 8); adc->timf += ((4260880253U % fdem) << 8) / fdem; deb_info("RF %6d; BW %6d; Xtal %6d; Fmem %6d; Fdem %6d; Fs %6d; Prediv %2d; Loopdiv %2d; Timf %8d;", fe->dtv_property_cache.frequency, fe->dtv_property_cache.bandwidth_hz, xtal, fmem, fdem, fs, prediv, loopdiv, adc->timf); break; } } } } if (!spur) break; } if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) return -EINVAL; return 0; } static int dib8096p_agc_startup(struct dvb_frontend *fe) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; struct dibx000_bandwidth_config pll; struct dibx090p_best_adc adc; u16 target; int ret; ret = state->set_param_save(fe); if (ret < 0) return ret; memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); dib0090_pwm_gain_reset(fe); /* dib0090_get_wbd_target is returning any possible temperature compensated wbd-target */ target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; state->dib8000_ops.set_wbd_ref(fe, target); if (dib8096p_get_best_sampling(fe, &adc) == 0) { pll.pll_ratio = adc.pll_loopdiv; pll.pll_prediv = adc.pll_prediv; dib0700_set_i2c_speed(adap->dev, 200); state->dib8000_ops.update_pll(fe, &pll, fe->dtv_property_cache.bandwidth_hz / 1000, 0); state->dib8000_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); dib0700_set_i2c_speed(adap->dev, 1000); } return 0; } static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; u32 fw_version; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib8000_attach, &state->dib8000_ops)) return -ENODEV; dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); if (fw_version >= 0x10200) st->fw_use_new_i2c_api = 1; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); state->dib8000_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1); adap->fe_adap[0].fe = state->dib8000_ops.init(&adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib8000_ops.get_i2c_tuner(adap->fe_adap[0].fe); tfe8096p_dib0090_config.reset = st->dib8000_ops.tuner_sleep; tfe8096p_dib0090_config.sleep = st->dib8000_ops.tuner_sleep; tfe8096p_dib0090_config.wbd = dib8096p_wbd_table; if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe8096p_dib0090_config) == NULL) return -ENODEV; st->dib8000_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup; return 0; } /* STK9090M */ static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff) { return dib9000_fw_pid_filter(adapter->fe_adap[0].fe, index, pid, onoff); } static int dib90x0_pid_filter_ctrl(struct dvb_usb_adapter *adapter, int onoff) { return dib9000_fw_pid_filter_ctrl(adapter->fe_adap[0].fe, onoff); } static int dib90x0_tuner_reset(struct dvb_frontend *fe, int onoff) { return dib9000_set_gpio(fe, 5, 0, !onoff); } static int dib90x0_tuner_sleep(struct dvb_frontend *fe, int onoff) { return dib9000_set_gpio(fe, 0, 0, onoff); } static int dib01x0_pmu_update(struct i2c_adapter *i2c, u16 *data, u8 len) { u8 wb[4] = { 0xc >> 8, 0xc & 0xff, 0, 0 }; u8 rb[2]; struct i2c_msg msg[2] = { {.addr = 0x1e >> 1, .flags = 0, .buf = wb, .len = 2}, {.addr = 0x1e >> 1, .flags = I2C_M_RD, .buf = rb, .len = 2}, }; u8 index_data; dibx000_i2c_set_speed(i2c, 250); if (i2c_transfer(i2c, msg, 2) != 2) return -EIO; switch (rb[0] << 8 | rb[1]) { case 0: deb_info("Found DiB0170 rev1: This version of DiB0170 is not supported any longer.\n"); return -EIO; case 1: deb_info("Found DiB0170 rev2"); break; case 2: deb_info("Found DiB0190 rev2"); break; default: deb_info("DiB01x0 not found"); return -EIO; } for (index_data = 0; index_data < len; index_data += 2) { wb[2] = (data[index_data + 1] >> 8) & 0xff; wb[3] = (data[index_data + 1]) & 0xff; if (data[index_data] == 0) { wb[0] = (data[index_data] >> 8) & 0xff; wb[1] = (data[index_data]) & 0xff; msg[0].len = 2; if (i2c_transfer(i2c, msg, 2) != 2) return -EIO; wb[2] |= rb[0]; wb[3] |= rb[1] & ~(3 << 4); } wb[0] = (data[index_data] >> 8)&0xff; wb[1] = (data[index_data])&0xff; msg[0].len = 4; if (i2c_transfer(i2c, &msg[0], 1) != 1) return -EIO; } return 0; } static struct dib9000_config stk9090m_config = { .output_mpeg2_in_188_bytes = 1, .output_mode = OUTMODE_MPEG2_FIFO, .vcxo_timer = 279620, .timing_frequency = 20452225, .demod_clock_khz = 60000, .xtal_clock_khz = 30000, .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), .subband = { 2, { { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0008 } }, /* GPIO 3 to 1 for VHF */ { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0008, 0x0000, 0x0000 } }, /* GPIO 3 to 0 for UHF */ { 0 }, }, }, .gpio_function = { { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, }, }; static struct dib9000_config nim9090md_config[2] = { { .output_mpeg2_in_188_bytes = 1, .output_mode = OUTMODE_MPEG2_FIFO, .vcxo_timer = 279620, .timing_frequency = 20452225, .demod_clock_khz = 60000, .xtal_clock_khz = 30000, .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), }, { .output_mpeg2_in_188_bytes = 1, .output_mode = OUTMODE_DIVERSITY, .vcxo_timer = 279620, .timing_frequency = 20452225, .demod_clock_khz = 60000, .xtal_clock_khz = 30000, .if_drives = (0 << 15) | (1 << 13) | (0 << 12) | (3 << 10) | (0 << 9) | (1 << 7) | (0 << 6) | (0 << 4) | (1 << 3) | (1 << 1) | (0), .subband = { 2, { { 240, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0006 } }, /* GPIO 1 and 2 to 1 for VHF */ { 890, { BOARD_GPIO_COMPONENT_DEMOD, BOARD_GPIO_FUNCTION_SUBBAND_GPIO, 0x0006, 0x0000, 0x0000 } }, /* GPIO 1 and 2 to 0 for UHF */ { 0 }, }, }, .gpio_function = { { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_ON, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = (0x10 & ~0x1) | 0x20 }, { .component = BOARD_GPIO_COMPONENT_DEMOD, .function = BOARD_GPIO_FUNCTION_COMPONENT_OFF, .mask = 0x10 | 0x21, .direction = 0 & ~0x21, .value = 0 | 0x21 }, }, } }; static struct dib0090_config dib9090_dib0090_config = { .io.pll_bypass = 0, .io.pll_range = 1, .io.pll_prediv = 1, .io.pll_loopdiv = 8, .io.adc_clock_ratio = 8, .io.pll_int_loop_filt = 0, .io.clock_khz = 30000, .reset = dib90x0_tuner_reset, .sleep = dib90x0_tuner_sleep, .clkouttobamse = 0, .analog_output = 0, .use_pwm_agc = 0, .clkoutdrive = 0, .freq_offset_khz_uhf = 0, .freq_offset_khz_vhf = 0, }; static struct dib0090_config nim9090md_dib0090_config[2] = { { .io.pll_bypass = 0, .io.pll_range = 1, .io.pll_prediv = 1, .io.pll_loopdiv = 8, .io.adc_clock_ratio = 8, .io.pll_int_loop_filt = 0, .io.clock_khz = 30000, .reset = dib90x0_tuner_reset, .sleep = dib90x0_tuner_sleep, .clkouttobamse = 1, .analog_output = 0, .use_pwm_agc = 0, .clkoutdrive = 0, .freq_offset_khz_uhf = 0, .freq_offset_khz_vhf = 0, }, { .io.pll_bypass = 0, .io.pll_range = 1, .io.pll_prediv = 1, .io.pll_loopdiv = 8, .io.adc_clock_ratio = 8, .io.pll_int_loop_filt = 0, .io.clock_khz = 30000, .reset = dib90x0_tuner_reset, .sleep = dib90x0_tuner_sleep, .clkouttobamse = 0, .analog_output = 0, .use_pwm_agc = 0, .clkoutdrive = 0, .freq_offset_khz_uhf = 0, .freq_offset_khz_vhf = 0, } }; static int stk9090m_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; struct dib0700_state *st = adap->dev->priv; u32 fw_version; /* Make use of the new i2c functions from FW 1.20 */ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); if (fw_version >= 0x10200) st->fw_use_new_i2c_api = 1; dib0700_set_i2c_speed(adap->dev, 340); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80); if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { deb_info("%s: Upload failed. (file not found?)\n", __func__); return -ENODEV; } else { deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); } stk9090m_config.microcode_B_fe_size = state->frontend_firmware->size; stk9090m_config.microcode_B_fe_buffer = state->frontend_firmware->data; adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &stk9090m_config); if (!adap->fe_adap[0].fe) { release_firmware(state->frontend_firmware); return -ENODEV; } return 0; } static int dib9090_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; struct i2c_adapter *i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); u16 data_dib190[10] = { 1, 0x1374, 2, 0x01a2, 7, 0x0020, 0, 0x00ef, 8, 0x0486, }; if (!IS_ENABLED(CONFIG_DVB_DIB9000)) return -ENODEV; if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &dib9090_dib0090_config) == NULL) return -ENODEV; i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); if (!i2c) return -ENODEV; if (dib01x0_pmu_update(i2c, data_dib190, 10) != 0) return -ENODEV; dib0700_set_i2c_speed(adap->dev, 1500); if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) return -ENODEV; release_firmware(state->frontend_firmware); return 0; } static int nim9090md_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; struct dib0700_state *st = adap->dev->priv; struct i2c_adapter *i2c; struct dvb_frontend *fe_slave; u32 fw_version; /* Make use of the new i2c functions from FW 1.20 */ dib0700_get_version(adap->dev, NULL, NULL, &fw_version, NULL); if (fw_version >= 0x10200) st->fw_use_new_i2c_api = 1; dib0700_set_i2c_speed(adap->dev, 340); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(adap->dev, 72, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (request_firmware(&state->frontend_firmware, "dib9090.fw", &adap->dev->udev->dev)) { deb_info("%s: Upload failed. (file not found?)\n", __func__); return -EIO; } else { deb_info("%s: firmware read %zu bytes.\n", __func__, state->frontend_firmware->size); } nim9090md_config[0].microcode_B_fe_size = state->frontend_firmware->size; nim9090md_config[0].microcode_B_fe_buffer = state->frontend_firmware->data; nim9090md_config[1].microcode_B_fe_size = state->frontend_firmware->size; nim9090md_config[1].microcode_B_fe_buffer = state->frontend_firmware->data; dib9000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, 0x80); adap->fe_adap[0].fe = dvb_attach(dib9000_attach, &adap->dev->i2c_adap, 0x80, &nim9090md_config[0]); if (!adap->fe_adap[0].fe) { release_firmware(state->frontend_firmware); return -ENODEV; } i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_3_4, 0); dib9000_i2c_enumeration(i2c, 1, 0x12, 0x82); fe_slave = dvb_attach(dib9000_attach, i2c, 0x82, &nim9090md_config[1]); dib9000_set_slave_frontend(adap->fe_adap[0].fe, fe_slave); if (!fe_slave) { release_firmware(state->frontend_firmware); return -ENODEV; } return 0; } static int nim9090md_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; struct i2c_adapter *i2c; struct dvb_frontend *fe_slave; u16 data_dib190[10] = { 1, 0x5374, 2, 0x01ae, 7, 0x0020, 0, 0x00ef, 8, 0x0406, }; if (!IS_ENABLED(CONFIG_DVB_DIB9000)) return -ENODEV; i2c = dib9000_get_tuner_interface(adap->fe_adap[0].fe); if (dvb_attach(dib0090_fw_register, adap->fe_adap[0].fe, i2c, &nim9090md_dib0090_config[0]) == NULL) return -ENODEV; i2c = dib9000_get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_1_2, 0); if (!i2c) return -ENODEV; if (dib01x0_pmu_update(i2c, data_dib190, 10) < 0) return -ENODEV; dib0700_set_i2c_speed(adap->dev, 1500); if (dib9000_firmware_post_pll_init(adap->fe_adap[0].fe) < 0) return -ENODEV; fe_slave = dib9000_get_slave_frontend(adap->fe_adap[0].fe, 1); if (fe_slave != NULL) { i2c = dib9000_get_component_bus_interface(adap->fe_adap[0].fe); dib9000_set_i2c_adapter(fe_slave, i2c); i2c = dib9000_get_tuner_interface(fe_slave); if (dvb_attach(dib0090_fw_register, fe_slave, i2c, &nim9090md_dib0090_config[1]) == NULL) return -ENODEV; fe_slave->dvb = adap->fe_adap[0].fe->dvb; dib9000_fw_set_component_bus_speed(adap->fe_adap[0].fe, 1500); if (dib9000_firmware_post_pll_init(fe_slave) < 0) return -ENODEV; } release_firmware(state->frontend_firmware); return 0; } /* NIM7090 */ static int dib7090p_get_best_sampling(struct dvb_frontend *fe , struct dibx090p_best_adc *adc) { u8 spur = 0, prediv = 0, loopdiv = 0, min_prediv = 1, max_prediv = 1; u16 xtal = 12000; u32 fcp_min = 1900; /* PLL Minimum Frequency comparator KHz */ u32 fcp_max = 20000; /* PLL Maximum Frequency comparator KHz */ u32 fdem_max = 76000; u32 fdem_min = 69500; u32 fcp = 0, fs = 0, fdem = 0; u32 harmonic_id = 0; adc->pll_loopdiv = loopdiv; adc->pll_prediv = prediv; adc->timf = 0; deb_info("bandwidth = %d fdem_min =%d", fe->dtv_property_cache.bandwidth_hz, fdem_min); /* Find Min and Max prediv */ while ((xtal/max_prediv) >= fcp_min) max_prediv++; max_prediv--; min_prediv = max_prediv; while ((xtal/min_prediv) <= fcp_max) { min_prediv--; if (min_prediv == 1) break; } deb_info("MIN prediv = %d : MAX prediv = %d", min_prediv, max_prediv); min_prediv = 2; for (prediv = min_prediv ; prediv < max_prediv; prediv++) { fcp = xtal / prediv; if (fcp > fcp_min && fcp < fcp_max) { for (loopdiv = 1 ; loopdiv < 64 ; loopdiv++) { fdem = ((xtal/prediv) * loopdiv); fs = fdem / 4; /* test min/max system restrictions */ if ((fdem >= fdem_min) && (fdem <= fdem_max) && (fs >= fe->dtv_property_cache.bandwidth_hz/1000)) { spur = 0; /* test fs harmonics positions */ for (harmonic_id = (fe->dtv_property_cache.frequency / (1000*fs)) ; harmonic_id <= ((fe->dtv_property_cache.frequency / (1000*fs))+1) ; harmonic_id++) { if (((fs*harmonic_id) >= ((fe->dtv_property_cache.frequency/1000) - (fe->dtv_property_cache.bandwidth_hz/2000))) && ((fs*harmonic_id) <= ((fe->dtv_property_cache.frequency/1000) + (fe->dtv_property_cache.bandwidth_hz/2000)))) { spur = 1; break; } } if (!spur) { adc->pll_loopdiv = loopdiv; adc->pll_prediv = prediv; adc->timf = 2396745143UL/fdem*(1 << 9); adc->timf += ((2396745143UL%fdem) << 9)/fdem; deb_info("loopdiv=%i prediv=%i timf=%i", loopdiv, prediv, adc->timf); break; } } } } if (!spur) break; } if (adc->pll_loopdiv == 0 && adc->pll_prediv == 0) return -EINVAL; else return 0; } static int dib7090_agc_startup(struct dvb_frontend *fe) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; struct dibx000_bandwidth_config pll; u16 target; struct dibx090p_best_adc adc; int ret; ret = state->set_param_save(fe); if (ret < 0) return ret; memset(&pll, 0, sizeof(struct dibx000_bandwidth_config)); dib0090_pwm_gain_reset(fe); target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2; state->dib7000p_ops.set_wbd_ref(fe, target); if (dib7090p_get_best_sampling(fe, &adc) == 0) { pll.pll_ratio = adc.pll_loopdiv; pll.pll_prediv = adc.pll_prediv; state->dib7000p_ops.update_pll(fe, &pll); state->dib7000p_ops.ctrl_timf(fe, DEMOD_TIMF_SET, adc.timf); } return 0; } static int dib7090_agc_restart(struct dvb_frontend *fe, u8 restart) { deb_info("AGC restart callback: %d", restart); if (restart == 0) /* before AGC startup */ dib0090_set_dc_servo(fe, 1); return 0; } static int tfe7790p_update_lna(struct dvb_frontend *fe, u16 agc_global) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; deb_info("update LNA: agc global=%i", agc_global); if (agc_global < 25000) { state->dib7000p_ops.set_gpio(fe, 8, 0, 0); state->dib7000p_ops.set_agc1_min(fe, 0); } else { state->dib7000p_ops.set_gpio(fe, 8, 0, 1); state->dib7000p_ops.set_agc1_min(fe, 32768); } return 0; } static struct dib0090_wbd_slope dib7090_wbd_table[] = { { 380, 81, 850, 64, 540, 4}, { 860, 51, 866, 21, 375, 4}, {1700, 0, 250, 0, 100, 6}, {2600, 0, 250, 0, 100, 6}, { 0xFFFF, 0, 0, 0, 0, 0}, }; static struct dibx000_agc_config dib7090_agc_config[2] = { { .band_caps = BAND_UHF, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 687, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 1200, .wbd_sel = 3, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 32768, .agc2_max = 65535, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 32, .agc1_pt3 = 114, .agc1_slope1 = 143, .agc1_slope2 = 144, .agc2_pt1 = 114, .agc2_pt2 = 227, .agc2_slope1 = 116, .agc2_slope2 = 117, .alpha_mant = 18, .alpha_exp = 0, .beta_mant = 20, .beta_exp = 59, .perform_agc_softsplit = 0, } , { .band_caps = BAND_FM | BAND_VHF | BAND_CBAND, /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5, P_agc_write=0 */ .setup = (0 << 15) | (0 << 14) | (5 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5) | (0 << 4) | (5 << 1) | (0 << 0), .inv_gain = 732, .time_stabiliz = 10, .alpha_level = 0, .thlock = 118, .wbd_inv = 0, .wbd_ref = 1200, .wbd_sel = 3, .wbd_alpha = 5, .agc1_max = 65535, .agc1_min = 0, .agc2_max = 65535, .agc2_min = 0, .agc1_pt1 = 0, .agc1_pt2 = 0, .agc1_pt3 = 98, .agc1_slope1 = 0, .agc1_slope2 = 167, .agc2_pt1 = 98, .agc2_pt2 = 255, .agc2_slope1 = 104, .agc2_slope2 = 0, .alpha_mant = 18, .alpha_exp = 0, .beta_mant = 20, .beta_exp = 59, .perform_agc_softsplit = 0, } }; static struct dibx000_bandwidth_config dib7090_clock_config_12_mhz = { .internal = 60000, .sampling = 15000, .pll_prediv = 1, .pll_ratio = 5, .pll_range = 0, .pll_reset = 0, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 2, .sad_cfg = (3 << 14) | (1 << 12) | (524 << 0), .ifreq = (0 << 25) | 0, .timf = 20452225, .xtal_hz = 15000000, }; static struct dib7000p_config nim7090_dib7000p_config = { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .update_lna = tfe7790p_update_lna, /* GPIO used is the same as TFE7790 */ .agc_config_count = 2, .agc = dib7090_agc_config, .bw = &dib7090_clock_config_12_mhz, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .pwm_freq_div = 0, .agc_control = dib7090_agc_restart, .spur_protect = 0, .disable_sample_and_hold = 0, .enable_current_mirror = 0, .diversity_delay = 0, .output_mode = OUTMODE_MPEG2_FIFO, .enMpegOutput = 1, }; static int tfe7090p_pvr_update_lna(struct dvb_frontend *fe, u16 agc_global) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dib0700_adapter_state *state = adap->priv; deb_info("TFE7090P-PVR update LNA: agc global=%i", agc_global); if (agc_global < 25000) { state->dib7000p_ops.set_gpio(fe, 5, 0, 0); state->dib7000p_ops.set_agc1_min(fe, 0); } else { state->dib7000p_ops.set_gpio(fe, 5, 0, 1); state->dib7000p_ops.set_agc1_min(fe, 32768); } return 0; } static struct dib7000p_config tfe7090pvr_dib7000p_config[2] = { { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .update_lna = tfe7090p_pvr_update_lna, .agc_config_count = 2, .agc = dib7090_agc_config, .bw = &dib7090_clock_config_12_mhz, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .pwm_freq_div = 0, .agc_control = dib7090_agc_restart, .spur_protect = 0, .disable_sample_and_hold = 0, .enable_current_mirror = 0, .diversity_delay = 0, .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, .default_i2c_addr = 0x90, .enMpegOutput = 1, }, { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .update_lna = tfe7090p_pvr_update_lna, .agc_config_count = 2, .agc = dib7090_agc_config, .bw = &dib7090_clock_config_12_mhz, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .pwm_freq_div = 0, .agc_control = dib7090_agc_restart, .spur_protect = 0, .disable_sample_and_hold = 0, .enable_current_mirror = 0, .diversity_delay = 0, .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, .default_i2c_addr = 0x92, .enMpegOutput = 0, } }; static struct dib0090_config nim7090_dib0090_config = { .io.clock_khz = 12000, .io.pll_bypass = 0, .io.pll_range = 0, .io.pll_prediv = 3, .io.pll_loopdiv = 6, .io.adc_clock_ratio = 0, .io.pll_int_loop_filt = 0, .freq_offset_khz_uhf = 0, .freq_offset_khz_vhf = 0, .clkouttobamse = 1, .analog_output = 0, .wbd_vhf_offset = 0, .wbd_cband_offset = 0, .use_pwm_agc = 1, .clkoutdrive = 0, .fref_clock_ratio = 0, .wbd = dib7090_wbd_table, .ls_cfg_pad_drv = 0, .data_tx_drv = 0, .low_if = NULL, .in_soc = 1, }; static struct dib7000p_config tfe7790p_dib7000p_config = { .output_mpeg2_in_188_bytes = 1, .hostbus_diversity = 1, .tuner_is_baseband = 1, .update_lna = tfe7790p_update_lna, .agc_config_count = 2, .agc = dib7090_agc_config, .bw = &dib7090_clock_config_12_mhz, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .pwm_freq_div = 0, .agc_control = dib7090_agc_restart, .spur_protect = 0, .disable_sample_and_hold = 0, .enable_current_mirror = 0, .diversity_delay = 0, .output_mode = OUTMODE_MPEG2_PAR_GATED_CLK, .enMpegOutput = 1, }; static struct dib0090_config tfe7790p_dib0090_config = { .io.clock_khz = 12000, .io.pll_bypass = 0, .io.pll_range = 0, .io.pll_prediv = 3, .io.pll_loopdiv = 6, .io.adc_clock_ratio = 0, .io.pll_int_loop_filt = 0, .freq_offset_khz_uhf = 0, .freq_offset_khz_vhf = 0, .clkouttobamse = 1, .analog_output = 0, .wbd_vhf_offset = 0, .wbd_cband_offset = 0, .use_pwm_agc = 1, .clkoutdrive = 0, .fref_clock_ratio = 0, .wbd = dib7090_wbd_table, .ls_cfg_pad_drv = 0, .data_tx_drv = 0, .low_if = NULL, .in_soc = 1, .force_cband_input = 0, .is_dib7090e = 0, .force_crystal_mode = 1, }; static struct dib0090_config tfe7090pvr_dib0090_config[2] = { { .io.clock_khz = 12000, .io.pll_bypass = 0, .io.pll_range = 0, .io.pll_prediv = 3, .io.pll_loopdiv = 6, .io.adc_clock_ratio = 0, .io.pll_int_loop_filt = 0, .freq_offset_khz_uhf = 50, .freq_offset_khz_vhf = 70, .clkouttobamse = 1, .analog_output = 0, .wbd_vhf_offset = 0, .wbd_cband_offset = 0, .use_pwm_agc = 1, .clkoutdrive = 0, .fref_clock_ratio = 0, .wbd = dib7090_wbd_table, .ls_cfg_pad_drv = 0, .data_tx_drv = 0, .low_if = NULL, .in_soc = 1, }, { .io.clock_khz = 12000, .io.pll_bypass = 0, .io.pll_range = 0, .io.pll_prediv = 3, .io.pll_loopdiv = 6, .io.adc_clock_ratio = 0, .io.pll_int_loop_filt = 0, .freq_offset_khz_uhf = -50, .freq_offset_khz_vhf = -70, .clkouttobamse = 1, .analog_output = 0, .wbd_vhf_offset = 0, .wbd_cband_offset = 0, .use_pwm_agc = 1, .clkoutdrive = 0, .fref_clock_ratio = 0, .wbd = dib7090_wbd_table, .ls_cfg_pad_drv = 0, .data_tx_drv = 0, .low_if = NULL, .in_soc = 1, } }; static int nim7090_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &nim7090_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &nim7090_dib7000p_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int nim7090_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe); nim7090_dib0090_config.reset = st->dib7000p_ops.tuner_sleep; nim7090_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep; nim7090_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power; if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &nim7090_dib0090_config) == NULL) return -ENODEV; st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; return 0; } static int tfe7090pvr_frontend0_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; /* The TFE7090 requires the dib0700 to not be in master mode */ st->disable_streaming_master_mode = 1; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(20); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); /* initialize IC 0 */ if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x20, &tfe7090pvr_dib7000p_config[0]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } dib0700_set_i2c_speed(adap->dev, 340); adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x90, &tfe7090pvr_dib7000p_config[0]); if (adap->fe_adap[0].fe == NULL) return -ENODEV; state->dib7000p_ops.slave_reset(adap->fe_adap[0].fe); return 0; } static int tfe7090pvr_frontend1_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *i2c; struct dib0700_adapter_state *state = adap->priv; if (adap->dev->adapter[0].fe_adap[0].fe == NULL) { err("the master dib7090 has to be initialized first"); return -ENODEV; /* the master device has not been initialized */ } if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; i2c = state->dib7000p_ops.get_i2c_master(adap->dev->adapter[0].fe_adap[0].fe, DIBX000_I2C_INTERFACE_GPIO_6_7, 1); if (state->dib7000p_ops.i2c_enumeration(i2c, 1, 0x10, &tfe7090pvr_dib7000p_config[1]) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(i2c, 0x92, &tfe7090pvr_dib7000p_config[1]); dib0700_set_i2c_speed(adap->dev, 200); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int tfe7090pvr_tuner0_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe); tfe7090pvr_dib0090_config[0].reset = st->dib7000p_ops.tuner_sleep; tfe7090pvr_dib0090_config[0].sleep = st->dib7000p_ops.tuner_sleep; tfe7090pvr_dib0090_config[0].get_adc_power = st->dib7000p_ops.get_adc_power; if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[0]) == NULL) return -ENODEV; st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; return 0; } static int tfe7090pvr_tuner1_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe); tfe7090pvr_dib0090_config[1].reset = st->dib7000p_ops.tuner_sleep; tfe7090pvr_dib0090_config[1].sleep = st->dib7000p_ops.tuner_sleep; tfe7090pvr_dib0090_config[1].get_adc_power = st->dib7000p_ops.get_adc_power; if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7090pvr_dib0090_config[1]) == NULL) return -ENODEV; st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; return 0; } static int tfe7790p_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; /* The TFE7790P requires the dib0700 to not be in master mode */ st->disable_streaming_master_mode = 1; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(20); dib0700_ctrl_clock(adap->dev, 72, 1); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(20); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, &tfe7790p_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &tfe7790p_dib7000p_config); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int tfe7790p_tuner_attach(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *st = adap->priv; struct i2c_adapter *tun_i2c = st->dib7000p_ops.get_i2c_tuner(adap->fe_adap[0].fe); tfe7790p_dib0090_config.reset = st->dib7000p_ops.tuner_sleep; tfe7790p_dib0090_config.sleep = st->dib7000p_ops.tuner_sleep; tfe7790p_dib0090_config.get_adc_power = st->dib7000p_ops.get_adc_power; if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c, &tfe7790p_dib0090_config) == NULL) return -ENODEV; st->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params; adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib7090_agc_startup; return 0; } /* STK7070PD */ static struct dib7000p_config stk7070pd_dib7000p_config[2] = { { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, .tuner_is_baseband = 1, .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, }, { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &dib7070_agc_config, .bw = &dib7070_bw_config_12_mhz, .tuner_is_baseband = 1, .spur_protect = 1, .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, .hostbus_diversity = 1, } }; static void stk7070pd_init(struct dvb_usb_device *dev) { dib0700_set_gpio(dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 0); dib0700_ctrl_clock(dev, 72, 1); msleep(10); dib0700_set_gpio(dev, GPIO10, GPIO_OUT, 1); } static int stk7070pd_frontend_attach0(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; stk7070pd_init(adap->dev); msleep(10); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&adap->dev->i2c_adap, 2, 18, stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x80, &stk7070pd_dib7000p_config[0]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int stk7070pd_frontend_attach1(struct dvb_usb_adapter *adap) { struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x82, &stk7070pd_dib7000p_config[1]); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int novatd_read_status_override(struct dvb_frontend *fe, enum fe_status *stat) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dvb_usb_device *dev = adap->dev; struct dib0700_state *state = dev->priv; int ret; ret = state->read_status(fe, stat); if (!ret) dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, !!(*stat & FE_HAS_LOCK)); return ret; } static int novatd_sleep_override(struct dvb_frontend* fe) { struct dvb_usb_adapter *adap = fe->dvb->priv; struct dvb_usb_device *dev = adap->dev; struct dib0700_state *state = dev->priv; /* turn off LED */ dib0700_set_gpio(dev, adap->id == 0 ? GPIO1 : GPIO0, GPIO_OUT, 0); return state->sleep(fe); } /* * novatd_frontend_attach - Nova-TD specific attach * * Nova-TD has GPIO0, 1 and 2 for LEDs. So do not fiddle with them except for * information purposes. */ static int novatd_frontend_attach(struct dvb_usb_adapter *adap) { struct dvb_usb_device *dev = adap->dev; struct dib0700_state *st = dev->priv; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; if (adap->id == 0) { stk7070pd_init(dev); /* turn the power LED on, the other two off (just in case) */ dib0700_set_gpio(dev, GPIO0, GPIO_OUT, 0); dib0700_set_gpio(dev, GPIO1, GPIO_OUT, 0); dib0700_set_gpio(dev, GPIO2, GPIO_OUT, 1); if (state->dib7000p_ops.i2c_enumeration(&dev->i2c_adap, 2, 18, stk7070pd_dib7000p_config) != 0) { err("%s: state->dib7000p_ops.i2c_enumeration failed. Cannot continue\n", __func__); dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } } adap->fe_adap[0].fe = state->dib7000p_ops.init(&dev->i2c_adap, adap->id == 0 ? 0x80 : 0x82, &stk7070pd_dib7000p_config[adap->id]); if (adap->fe_adap[0].fe == NULL) return -ENODEV; st->read_status = adap->fe_adap[0].fe->ops.read_status; adap->fe_adap[0].fe->ops.read_status = novatd_read_status_override; st->sleep = adap->fe_adap[0].fe->ops.sleep; adap->fe_adap[0].fe->ops.sleep = novatd_sleep_override; return 0; } /* S5H1411 */ static struct s5h1411_config pinnacle_801e_config = { .output_mode = S5H1411_PARALLEL_OUTPUT, .gpio = S5H1411_GPIO_OFF, .mpeg_timing = S5H1411_MPEGTIMING_NONCONTINUOUS_NONINVERTING_CLOCK, .qam_if = S5H1411_IF_44000, .vsb_if = S5H1411_IF_44000, .inversion = S5H1411_INVERSION_OFF, .status_mode = S5H1411_DEMODLOCKING }; /* Pinnacle PCTV HD Pro 801e GPIOs map: GPIO0 - currently unknown GPIO1 - xc5000 tuner reset GPIO2 - CX25843 sleep GPIO3 - currently unknown GPIO4 - currently unknown GPIO6 - currently unknown GPIO7 - currently unknown GPIO9 - currently unknown GPIO10 - CX25843 reset */ static int s5h1411_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; /* Make use of the new i2c functions from FW 1.20 */ st->fw_use_new_i2c_api = 1; /* The s5h1411 requires the dib0700 to not be in master mode */ st->disable_streaming_master_mode = 1; /* All msleep values taken from Windows USB trace */ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 0); dib0700_set_gpio(adap->dev, GPIO3, GPIO_OUT, 0); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(400); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(60); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(30); dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 0); msleep(30); /* Put the CX25843 to sleep for now since we're in digital mode */ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); /* GPIOs are initialized, do the attach */ adap->fe_adap[0].fe = dvb_attach(s5h1411_attach, &pinnacle_801e_config, &adap->dev->i2c_adap); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int dib0700_xc5000_tuner_callback(void *priv, int component, int command, int arg) { struct dvb_usb_adapter *adap = priv; if (command == XC5000_TUNER_RESET) { /* Reset the tuner */ dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 0); msleep(10); dib0700_set_gpio(adap->dev, GPIO1, GPIO_OUT, 1); msleep(10); } else { err("xc5000: unknown tuner callback command: %d\n", command); return -EINVAL; } return 0; } static struct xc5000_config s5h1411_xc5000_tunerconfig = { .i2c_address = 0x64, .if_khz = 5380, }; static int xc5000_tuner_attach(struct dvb_usb_adapter *adap) { /* FIXME: generalize & move to common area */ adap->fe_adap[0].fe->callback = dib0700_xc5000_tuner_callback; return dvb_attach(xc5000_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, &s5h1411_xc5000_tunerconfig) == NULL ? -ENODEV : 0; } static int dib0700_xc4000_tuner_callback(void *priv, int component, int command, int arg) { struct dvb_usb_adapter *adap = priv; struct dib0700_adapter_state *state = adap->priv; if (command == XC4000_TUNER_RESET) { /* Reset the tuner */ state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 0); msleep(10); state->dib7000p_ops.set_gpio(adap->fe_adap[0].fe, 8, 0, 1); } else { err("xc4000: unknown tuner callback command: %d\n", command); return -EINVAL; } return 0; } static struct dibx000_agc_config stk7700p_7000p_xc4000_agc_config = { .band_caps = BAND_UHF | BAND_VHF, .setup = 0x64, .inv_gain = 0x02c8, .time_stabiliz = 0x15, .alpha_level = 0x00, .thlock = 0x76, .wbd_inv = 0x01, .wbd_ref = 0x0b33, .wbd_sel = 0x00, .wbd_alpha = 0x02, .agc1_max = 0x00, .agc1_min = 0x00, .agc2_max = 0x9b26, .agc2_min = 0x26ca, .agc1_pt1 = 0x00, .agc1_pt2 = 0x00, .agc1_pt3 = 0x00, .agc1_slope1 = 0x00, .agc1_slope2 = 0x00, .agc2_pt1 = 0x00, .agc2_pt2 = 0x80, .agc2_slope1 = 0x1d, .agc2_slope2 = 0x1d, .alpha_mant = 0x11, .alpha_exp = 0x1b, .beta_mant = 0x17, .beta_exp = 0x33, .perform_agc_softsplit = 0x00, }; static struct dibx000_bandwidth_config stk7700p_xc4000_pll_config = { .internal = 60000, .sampling = 30000, .pll_prediv = 1, .pll_ratio = 8, .pll_range = 3, .pll_reset = 1, .pll_bypass = 0, .enable_refdiv = 0, .bypclk_div = 0, .IO_CLK_en_core = 1, .ADClkSrc = 1, .modulo = 0, .sad_cfg = (3 << 14) | (1 << 12) | 524, /* sad_cfg: refsel, sel, freq_15k */ .ifreq = 39370534, .timf = 20452225, .xtal_hz = 30000000 }; /* FIXME: none of these inputs are validated yet */ static struct dib7000p_config pctv_340e_config = { .output_mpeg2_in_188_bytes = 1, .agc_config_count = 1, .agc = &stk7700p_7000p_xc4000_agc_config, .bw = &stk7700p_xc4000_pll_config, .gpio_dir = DIB7000M_GPIO_DEFAULT_DIRECTIONS, .gpio_val = DIB7000M_GPIO_DEFAULT_VALUES, .gpio_pwm_pos = DIB7000M_GPIO_DEFAULT_PWM_POS, }; /* PCTV 340e GPIOs map: dib0700: GPIO2 - CX25843 sleep GPIO3 - CS5340 reset GPIO5 - IRD GPIO6 - Power Supply GPIO8 - LNA (1=off 0=on) GPIO10 - CX25843 reset dib7000: GPIO8 - xc4000 reset */ static int pctv340e_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; struct dib0700_adapter_state *state = adap->priv; if (!dvb_attach(dib7000p_attach, &state->dib7000p_ops)) return -ENODEV; /* Power Supply on */ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(50); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(100); /* Allow power supply to settle before probing */ /* cx25843 reset */ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(1); /* cx25843 datasheet say 350us required */ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); /* LNA off for now */ dib0700_set_gpio(adap->dev, GPIO8, GPIO_OUT, 1); /* Put the CX25843 to sleep for now since we're in digital mode */ dib0700_set_gpio(adap->dev, GPIO2, GPIO_OUT, 1); /* FIXME: not verified yet */ dib0700_ctrl_clock(adap->dev, 72, 1); msleep(500); if (state->dib7000p_ops.dib7000pc_detection(&adap->dev->i2c_adap) == 0) { /* Demodulator not found for some reason? */ dvb_detach(state->dib7000p_ops.set_wbd_ref); return -ENODEV; } adap->fe_adap[0].fe = state->dib7000p_ops.init(&adap->dev->i2c_adap, 0x12, &pctv_340e_config); st->is_dib7000pc = 1; return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static struct xc4000_config dib7000p_xc4000_tunerconfig = { .i2c_address = 0x61, .default_pm = 1, .dvb_amplitude = 0, .set_smoothedcvbs = 0, .if_khz = 5400 }; static int xc4000_tuner_attach(struct dvb_usb_adapter *adap) { struct i2c_adapter *tun_i2c; struct dib0700_adapter_state *state = adap->priv; /* The xc4000 is not on the main i2c bus */ tun_i2c = state->dib7000p_ops.get_i2c_master(adap->fe_adap[0].fe, DIBX000_I2C_INTERFACE_TUNER, 1); if (tun_i2c == NULL) { printk(KERN_ERR "Could not reach tuner i2c bus\n"); return 0; } /* Setup the reset callback */ adap->fe_adap[0].fe->callback = dib0700_xc4000_tuner_callback; return dvb_attach(xc4000_attach, adap->fe_adap[0].fe, tun_i2c, &dib7000p_xc4000_tunerconfig) == NULL ? -ENODEV : 0; } static struct lgdt3305_config hcw_lgdt3305_config = { .i2c_addr = 0x0e, .mpeg_mode = LGDT3305_MPEG_PARALLEL, .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, .tpvalid_polarity = LGDT3305_TP_VALID_LOW, .deny_i2c_rptr = 0, .spectral_inversion = 1, .qam_if_khz = 6000, .vsb_if_khz = 6000, .usref_8vsb = 0x0500, }; static struct mxl5007t_config hcw_mxl5007t_config = { .xtal_freq_hz = MxL_XTAL_25_MHZ, .if_freq_hz = MxL_IF_6_MHZ, .invert_if = 1, }; /* TIGER-ATSC map: GPIO0 - LNA_CTR (H: LNA power enabled, L: LNA power disabled) GPIO1 - ANT_SEL (H: VPA, L: MCX) GPIO4 - SCL2 GPIO6 - EN_TUNER GPIO7 - SDA2 GPIO10 - DEM_RST MXL is behind LG's i2c repeater. LG is on SCL2/SDA2 gpios on the DIB */ static int lgdt3305_frontend_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; /* Make use of the new i2c functions from FW 1.20 */ st->fw_use_new_i2c_api = 1; st->disable_streaming_master_mode = 1; /* fe power enable */ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(30); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(30); /* demod reset */ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(30); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(30); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(30); adap->fe_adap[0].fe = dvb_attach(lgdt3305_attach, &hcw_lgdt3305_config, &adap->dev->i2c_adap); return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } static int mxl5007t_tuner_attach(struct dvb_usb_adapter *adap) { return dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe, &adap->dev->i2c_adap, 0x60, &hcw_mxl5007t_config) == NULL ? -ENODEV : 0; } static int xbox_one_attach(struct dvb_usb_adapter *adap) { struct dib0700_state *st = adap->dev->priv; struct i2c_client *client_demod, *client_tuner; struct dvb_usb_device *d = adap->dev; struct mn88472_config mn88472_config = { }; struct tda18250_config tda18250_config; struct i2c_board_info info; st->fw_use_new_i2c_api = 1; st->disable_streaming_master_mode = 1; /* fe power enable */ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); msleep(30); dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(30); /* demod reset */ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(30); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0); msleep(30); dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1); msleep(30); /* attach demod */ mn88472_config.fe = &adap->fe_adap[0].fe; mn88472_config.i2c_wr_max = 22; mn88472_config.xtal = 20500000; mn88472_config.ts_mode = PARALLEL_TS_MODE; mn88472_config.ts_clock = FIXED_TS_CLOCK; memset(&info, 0, sizeof(struct i2c_board_info)); strscpy(info.type, "mn88472", I2C_NAME_SIZE); info.addr = 0x18; info.platform_data = &mn88472_config; request_module(info.type); client_demod = i2c_new_client_device(&d->i2c_adap, &info); if (!i2c_client_has_driver(client_demod)) goto fail_demod_device; if (!try_module_get(client_demod->dev.driver->owner)) goto fail_demod_module; st->i2c_client_demod = client_demod; adap->fe_adap[0].fe = mn88472_config.get_dvb_frontend(client_demod); /* attach tuner */ memset(&tda18250_config, 0, sizeof(tda18250_config)); tda18250_config.if_dvbt_6 = 3950; tda18250_config.if_dvbt_7 = 4450; tda18250_config.if_dvbt_8 = 4950; tda18250_config.if_dvbc_6 = 4950; tda18250_config.if_dvbc_8 = 4950; tda18250_config.if_atsc = 4079; tda18250_config.loopthrough = true; tda18250_config.xtal_freq = TDA18250_XTAL_FREQ_27MHZ; tda18250_config.fe = adap->fe_adap[0].fe; memset(&info, 0, sizeof(struct i2c_board_info)); strscpy(info.type, "tda18250", I2C_NAME_SIZE); info.addr = 0x60; info.platform_data = &tda18250_config; request_module(info.type); client_tuner = i2c_new_client_device(&adap->dev->i2c_adap, &info); if (!i2c_client_has_driver(client_tuner)) goto fail_tuner_device; if (!try_module_get(client_tuner->dev.driver->owner)) goto fail_tuner_module; st->i2c_client_tuner = client_tuner; return 0; fail_tuner_module: i2c_unregister_device(client_tuner); fail_tuner_device: module_put(client_demod->dev.driver->owner); fail_demod_module: i2c_unregister_device(client_demod); fail_demod_device: return -ENODEV; } /* DVB-USB and USB stuff follows */ enum { DIBCOM_STK7700P, DIBCOM_STK7700P_PC, HAUPPAUGE_NOVA_T_500, HAUPPAUGE_NOVA_T_500_2, HAUPPAUGE_NOVA_T_STICK, AVERMEDIA_VOLAR, COMPRO_VIDEOMATE_U500, UNIWILL_STK7700P, LEADTEK_WINFAST_DTV_DONGLE_STK7700P, HAUPPAUGE_NOVA_T_STICK_2, AVERMEDIA_VOLAR_2, PINNACLE_PCTV2000E, TERRATEC_CINERGY_DT_XS_DIVERSITY, HAUPPAUGE_NOVA_TD_STICK, DIBCOM_STK7700D, DIBCOM_STK7070P, PINNACLE_PCTV_DVB_T_FLASH, DIBCOM_STK7070PD, PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T, COMPRO_VIDEOMATE_U500_PC, AVERMEDIA_EXPRESS, GIGABYTE_U7000, ULTIMA_ARTEC_T14BR, ASUS_U3000, ASUS_U3100, HAUPPAUGE_NOVA_T_STICK_3, HAUPPAUGE_MYTV_T, TERRATEC_CINERGY_HT_USB_XE, PINNACLE_EXPRESSCARD_320CX, PINNACLE_PCTV72E, PINNACLE_PCTV73E, YUAN_EC372S, TERRATEC_CINERGY_HT_EXPRESS, TERRATEC_CINERGY_T_XXS, LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2, HAUPPAUGE_NOVA_TD_STICK_52009, HAUPPAUGE_NOVA_T_500_3, GIGABYTE_U8000, YUAN_STK7700PH, ASUS_U3000H, PINNACLE_PCTV801E, PINNACLE_PCTV801E_SE, TERRATEC_CINERGY_T_EXPRESS, TERRATEC_CINERGY_DT_XS_DIVERSITY_2, SONY_PLAYTV, YUAN_PD378S, HAUPPAUGE_TIGER_ATSC, HAUPPAUGE_TIGER_ATSC_B210, YUAN_MC770, ELGATO_EYETV_DTT, ELGATO_EYETV_DTT_Dlx, LEADTEK_WINFAST_DTV_DONGLE_H, TERRATEC_T3, TERRATEC_T5, YUAN_STK7700D, YUAN_STK7700D_2, PINNACLE_PCTV73A, PCTV_PINNACLE_PCTV73ESE, PCTV_PINNACLE_PCTV282E, DIBCOM_STK7770P, TERRATEC_CINERGY_T_XXS_2, DIBCOM_STK807XPVR, DIBCOM_STK807XP, PIXELVIEW_SBTVD, EVOLUTEPC_TVWAY_PLUS, PINNACLE_PCTV73ESE, PINNACLE_PCTV282E, DIBCOM_STK8096GP, ELGATO_EYETV_DIVERSITY, DIBCOM_NIM9090M, DIBCOM_NIM8096MD, DIBCOM_NIM9090MD, DIBCOM_NIM7090, DIBCOM_TFE7090PVR, TECHNISAT_AIRSTAR_TELESTICK_2, MEDION_CREATIX_CTX1921, PINNACLE_PCTV340E, PINNACLE_PCTV340E_SE, DIBCOM_TFE7790P, DIBCOM_TFE8096P, ELGATO_EYETV_DTT_2, PCTV_2002E, PCTV_2002E_SE, PCTV_DIBCOM_STK8096PVR, DIBCOM_STK8096PVR, HAMA_DVBT_HYBRID, MICROSOFT_XBOX_ONE_TUNER, }; struct usb_device_id dib0700_usb_id_table[] = { DVB_USB_DEV(DIBCOM, DIBCOM_STK7700P), DVB_USB_DEV(DIBCOM, DIBCOM_STK7700P_PC), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500_2), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK), DVB_USB_DEV(AVERMEDIA, AVERMEDIA_VOLAR), DVB_USB_DEV(COMPRO, COMPRO_VIDEOMATE_U500), DVB_USB_DEV(UNIWILL, UNIWILL_STK7700P), DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_STK7700P), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK_2), DVB_USB_DEV(AVERMEDIA, AVERMEDIA_VOLAR_2), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV2000E), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_DT_XS_DIVERSITY), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_TD_STICK), DVB_USB_DEV(DIBCOM, DIBCOM_STK7700D), DVB_USB_DEV(DIBCOM, DIBCOM_STK7070P), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_DVB_T_FLASH), DVB_USB_DEV(DIBCOM, DIBCOM_STK7070PD), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T), DVB_USB_DEV(COMPRO, COMPRO_VIDEOMATE_U500_PC), DVB_USB_DEV(AVERMEDIA, AVERMEDIA_EXPRESS), DVB_USB_DEV(GIGABYTE, GIGABYTE_U7000), DVB_USB_DEV(ULTIMA_ELECTRONIC, ULTIMA_ARTEC_T14BR), DVB_USB_DEV(ASUS, ASUS_U3000), DVB_USB_DEV(ASUS, ASUS_U3100), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_STICK_3), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_MYTV_T), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_HT_USB_XE), DVB_USB_DEV(PINNACLE, PINNACLE_EXPRESSCARD_320CX), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV72E), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73E), DVB_USB_DEV(YUAN, YUAN_EC372S), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_HT_EXPRESS), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_XXS), DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_TD_STICK_52009), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_NOVA_T_500_3), DVB_USB_DEV(GIGABYTE, GIGABYTE_U8000), DVB_USB_DEV(YUAN, YUAN_STK7700PH), DVB_USB_DEV(ASUS, ASUS_U3000H), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV801E), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV801E_SE), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_EXPRESS), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_DT_XS_DIVERSITY_2), DVB_USB_DEV(SONY, SONY_PLAYTV), DVB_USB_DEV(YUAN, YUAN_PD378S), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_TIGER_ATSC), DVB_USB_DEV(HAUPPAUGE, HAUPPAUGE_TIGER_ATSC_B210), DVB_USB_DEV(YUAN, YUAN_MC770), DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT), DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT_Dlx), DVB_USB_DEV(LEADTEK, LEADTEK_WINFAST_DTV_DONGLE_H), DVB_USB_DEV(TERRATEC, TERRATEC_T3), DVB_USB_DEV(TERRATEC, TERRATEC_T5), DVB_USB_DEV(YUAN, YUAN_STK7700D), DVB_USB_DEV(YUAN, YUAN_STK7700D_2), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73A), DVB_USB_DEV(PCTV, PCTV_PINNACLE_PCTV73ESE), DVB_USB_DEV(PCTV, PCTV_PINNACLE_PCTV282E), DVB_USB_DEV(DIBCOM, DIBCOM_STK7770P), DVB_USB_DEV(TERRATEC, TERRATEC_CINERGY_T_XXS_2), DVB_USB_DEV(DIBCOM, DIBCOM_STK807XPVR), DVB_USB_DEV(DIBCOM, DIBCOM_STK807XP), DVB_USB_DEV_VER(PIXELVIEW, PIXELVIEW_SBTVD, 0x000, 0x3f00), DVB_USB_DEV(EVOLUTEPC, EVOLUTEPC_TVWAY_PLUS), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV73ESE), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV282E), DVB_USB_DEV(DIBCOM, DIBCOM_STK8096GP), DVB_USB_DEV(ELGATO, ELGATO_EYETV_DIVERSITY), DVB_USB_DEV(DIBCOM, DIBCOM_NIM9090M), DVB_USB_DEV(DIBCOM, DIBCOM_NIM8096MD), DVB_USB_DEV(DIBCOM, DIBCOM_NIM9090MD), DVB_USB_DEV(DIBCOM, DIBCOM_NIM7090), DVB_USB_DEV(DIBCOM, DIBCOM_TFE7090PVR), DVB_USB_DEV(TECHNISAT, TECHNISAT_AIRSTAR_TELESTICK_2), DVB_USB_DEV(MEDION, MEDION_CREATIX_CTX1921), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV340E), DVB_USB_DEV(PINNACLE, PINNACLE_PCTV340E_SE), DVB_USB_DEV(DIBCOM, DIBCOM_TFE7790P), DVB_USB_DEV(DIBCOM, DIBCOM_TFE8096P), DVB_USB_DEV(ELGATO, ELGATO_EYETV_DTT_2), DVB_USB_DEV(PCTV, PCTV_2002E), DVB_USB_DEV(PCTV, PCTV_2002E_SE), DVB_USB_DEV(PCTV, PCTV_DIBCOM_STK8096PVR), DVB_USB_DEV(DIBCOM, DIBCOM_STK8096PVR), DVB_USB_DEV(HAMA, HAMA_DVBT_HYBRID), DVB_USB_DEV(MICROSOFT, MICROSOFT_XBOX_ONE_TUNER), { } }; MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table); #define DIB0700_DEFAULT_DEVICE_PROPERTIES \ .caps = DVB_USB_IS_AN_I2C_ADAPTER, \ .usb_ctrl = DEVICE_SPECIFIC, \ .firmware = "dvb-usb-dib0700-1.20.fw", \ .download_firmware = dib0700_download_firmware, \ .no_reconnect = 1, \ .size_of_priv = sizeof(struct dib0700_state), \ .i2c_algo = &dib0700_i2c_algo, \ .identify_state = dib0700_identify_state #define DIB0700_DEFAULT_STREAMING_CONFIG(ep) \ .streaming_ctrl = dib0700_streaming_ctrl, \ .stream = { \ .type = USB_BULK, \ .count = 4, \ .endpoint = ep, \ .u = { \ .bulk = { \ .buffersize = 39480, \ } \ } \ } #define DIB0700_NUM_FRONTENDS(n) \ .num_frontends = n, \ .size_of_priv = sizeof(struct dib0700_adapter_state) struct dvb_usb_device_properties dib0700_devices[] = { { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk7700p_pid_filter, .pid_filter_ctrl = stk7700p_pid_filter_ctrl, .frontend_attach = stk7700p_frontend_attach, .tuner_attach = stk7700p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 8, .devices = { { "DiBcom STK7700P reference design", { &dib0700_usb_id_table[DIBCOM_STK7700P], &dib0700_usb_id_table[DIBCOM_STK7700P_PC] }, { NULL }, }, { "Hauppauge Nova-T Stick", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK], &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK_2], NULL }, { NULL }, }, { "AVerMedia AVerTV DVB-T Volar", { &dib0700_usb_id_table[AVERMEDIA_VOLAR], &dib0700_usb_id_table[AVERMEDIA_VOLAR_2] }, { NULL }, }, { "Compro Videomate U500", { &dib0700_usb_id_table[COMPRO_VIDEOMATE_U500], &dib0700_usb_id_table[COMPRO_VIDEOMATE_U500_PC] }, { NULL }, }, { "Uniwill STK7700P based (Hama and others)", { &dib0700_usb_id_table[UNIWILL_STK7700P], NULL }, { NULL }, }, { "Leadtek Winfast DTV Dongle (STK7700P based)", { &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_STK7700P], &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_STK7700P_2] }, { NULL }, }, { "AVerMedia AVerTV DVB-T Express", { &dib0700_usb_id_table[AVERMEDIA_EXPRESS] }, { NULL }, }, { "Gigabyte U7000", { &dib0700_usb_id_table[GIGABYTE_U7000], NULL }, { NULL }, } }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = bristol_frontend_attach, .tuner_attach = bristol_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = bristol_frontend_attach, .tuner_attach = bristol_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, } }, .num_device_descs = 1, .devices = { { "Hauppauge Nova-T 500 Dual DVB-T", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500], &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500_2], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7700d_frontend_attach, .tuner_attach = stk7700d_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7700d_frontend_attach, .tuner_attach = stk7700d_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, } }, .num_device_descs = 5, .devices = { { "Pinnacle PCTV 2000e", { &dib0700_usb_id_table[PINNACLE_PCTV2000E], NULL }, { NULL }, }, { "Terratec Cinergy DT XS Diversity", { &dib0700_usb_id_table[TERRATEC_CINERGY_DT_XS_DIVERSITY], NULL }, { NULL }, }, { "Hauppauge Nova-TD Stick/Elgato Eye-TV Diversity", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_TD_STICK], NULL }, { NULL }, }, { "DiBcom STK7700D reference design", { &dib0700_usb_id_table[DIBCOM_STK7700D], NULL }, { NULL }, }, { "YUAN High-Tech DiBcom STK7700D", { &dib0700_usb_id_table[YUAN_STK7700D_2], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7700P2_frontend_attach, .tuner_attach = stk7700d_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 3, .devices = { { "ASUS My Cinema U3000 Mini DVBT Tuner", { &dib0700_usb_id_table[ASUS_U3000], NULL }, { NULL }, }, { "Yuan EC372S", { &dib0700_usb_id_table[YUAN_EC372S], NULL }, { NULL }, }, { "Terratec Cinergy T Express", { &dib0700_usb_id_table[TERRATEC_CINERGY_T_EXPRESS], NULL }, { NULL }, } }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070p_frontend_attach, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 12, .devices = { { "DiBcom STK7070P reference design", { &dib0700_usb_id_table[DIBCOM_STK7070P], NULL }, { NULL }, }, { "Pinnacle PCTV DVB-T Flash Stick", { &dib0700_usb_id_table[PINNACLE_PCTV_DVB_T_FLASH], NULL }, { NULL }, }, { "Artec T14BR DVB-T", { &dib0700_usb_id_table[ULTIMA_ARTEC_T14BR], NULL }, { NULL }, }, { "ASUS My Cinema U3100 Mini DVBT Tuner", { &dib0700_usb_id_table[ASUS_U3100], NULL }, { NULL }, }, { "Hauppauge Nova-T Stick", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_STICK_3], NULL }, { NULL }, }, { "Hauppauge Nova-T MyTV.t", { &dib0700_usb_id_table[HAUPPAUGE_MYTV_T], NULL }, { NULL }, }, { "Pinnacle PCTV 72e", { &dib0700_usb_id_table[PINNACLE_PCTV72E], NULL }, { NULL }, }, { "Pinnacle PCTV 73e", { &dib0700_usb_id_table[PINNACLE_PCTV73E], NULL }, { NULL }, }, { "Elgato EyeTV DTT", { &dib0700_usb_id_table[ELGATO_EYETV_DTT], NULL }, { NULL }, }, { "Yuan PD378S", { &dib0700_usb_id_table[YUAN_PD378S], NULL }, { NULL }, }, { "Elgato EyeTV Dtt Dlx PD378S", { &dib0700_usb_id_table[ELGATO_EYETV_DTT_Dlx], NULL }, { NULL }, }, { "Elgato EyeTV DTT rev. 2", { &dib0700_usb_id_table[ELGATO_EYETV_DTT_2], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070p_frontend_attach, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 3, .devices = { { "Pinnacle PCTV 73A", { &dib0700_usb_id_table[PINNACLE_PCTV73A], NULL }, { NULL }, }, { "Pinnacle PCTV 73e SE", { &dib0700_usb_id_table[PCTV_PINNACLE_PCTV73ESE], &dib0700_usb_id_table[PINNACLE_PCTV73ESE], NULL }, { NULL }, }, { "Pinnacle PCTV 282e", { &dib0700_usb_id_table[PCTV_PINNACLE_PCTV282E], &dib0700_usb_id_table[PINNACLE_PCTV282E], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = novatd_frontend_attach, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = novatd_frontend_attach, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, } }, .num_device_descs = 3, .devices = { { "Hauppauge Nova-TD Stick (52009)", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_TD_STICK_52009], NULL }, { NULL }, }, { "PCTV 2002e", { &dib0700_usb_id_table[PCTV_2002E], NULL }, { NULL }, }, { "PCTV 2002e SE", { &dib0700_usb_id_table[PCTV_2002E_SE], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070pd_frontend_attach0, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070pd_frontend_attach1, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, } }, .num_device_descs = 5, .devices = { { "DiBcom STK7070PD reference design", { &dib0700_usb_id_table[DIBCOM_STK7070PD], NULL }, { NULL }, }, { "Pinnacle PCTV Dual DVB-T Diversity Stick", { &dib0700_usb_id_table[PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T], NULL }, { NULL }, }, { "Hauppauge Nova-TD-500 (84xxx)", { &dib0700_usb_id_table[HAUPPAUGE_NOVA_T_500_3], NULL }, { NULL }, }, { "Terratec Cinergy DT USB XS Diversity/ T5", { &dib0700_usb_id_table[TERRATEC_CINERGY_DT_XS_DIVERSITY_2], &dib0700_usb_id_table[TERRATEC_T5], NULL}, { NULL }, }, { "Sony PlayTV", { &dib0700_usb_id_table[SONY_PLAYTV], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070pd_frontend_attach0, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7070pd_frontend_attach1, .tuner_attach = dib7070p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, } }, .num_device_descs = 1, .devices = { { "Elgato EyeTV Diversity", { &dib0700_usb_id_table[ELGATO_EYETV_DIVERSITY], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_NEC_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7700ph_frontend_attach, .tuner_attach = stk7700ph_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 10, .devices = { { "Terratec Cinergy HT USB XE", { &dib0700_usb_id_table[TERRATEC_CINERGY_HT_USB_XE], NULL }, { NULL }, }, { "Pinnacle Expresscard 320cx", { &dib0700_usb_id_table[PINNACLE_EXPRESSCARD_320CX], NULL }, { NULL }, }, { "Terratec Cinergy HT Express", { &dib0700_usb_id_table[TERRATEC_CINERGY_HT_EXPRESS], NULL }, { NULL }, }, { "Gigabyte U8000-RH", { &dib0700_usb_id_table[GIGABYTE_U8000], NULL }, { NULL }, }, { "YUAN High-Tech STK7700PH", { &dib0700_usb_id_table[YUAN_STK7700PH], NULL }, { NULL }, }, { "Asus My Cinema-U3000Hybrid", { &dib0700_usb_id_table[ASUS_U3000H], NULL }, { NULL }, }, { "YUAN High-Tech MC770", { &dib0700_usb_id_table[YUAN_MC770], NULL }, { NULL }, }, { "Leadtek WinFast DTV Dongle H", { &dib0700_usb_id_table[LEADTEK_WINFAST_DTV_DONGLE_H], NULL }, { NULL }, }, { "YUAN High-Tech STK7700D", { &dib0700_usb_id_table[YUAN_STK7700D], NULL }, { NULL }, }, { "Hama DVB=T Hybrid USB Stick", { &dib0700_usb_id_table[HAMA_DVBT_HYBRID], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = s5h1411_frontend_attach, .tuner_attach = xc5000_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 2, .devices = { { "Pinnacle PCTV HD Pro USB Stick", { &dib0700_usb_id_table[PINNACLE_PCTV801E], NULL }, { NULL }, }, { "Pinnacle PCTV HD USB Stick", { &dib0700_usb_id_table[PINNACLE_PCTV801E_SE], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = lgdt3305_frontend_attach, .tuner_attach = mxl5007t_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 2, .devices = { { "Hauppauge ATSC MiniCard (B200)", { &dib0700_usb_id_table[HAUPPAUGE_TIGER_ATSC], NULL }, { NULL }, }, { "Hauppauge ATSC MiniCard (B210)", { &dib0700_usb_id_table[HAUPPAUGE_TIGER_ATSC_B210], NULL }, { NULL }, }, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = stk7770p_frontend_attach, .tuner_attach = dib7770p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 4, .devices = { { "DiBcom STK7770P reference design", { &dib0700_usb_id_table[DIBCOM_STK7770P], NULL }, { NULL }, }, { "Terratec Cinergy T USB XXS (HD)/ T3", { &dib0700_usb_id_table[TERRATEC_CINERGY_T_XXS], &dib0700_usb_id_table[TERRATEC_T3], &dib0700_usb_id_table[TERRATEC_CINERGY_T_XXS_2], NULL}, { NULL }, }, { "TechniSat AirStar TeleStick 2", { &dib0700_usb_id_table[TECHNISAT_AIRSTAR_TELESTICK_2], NULL }, { NULL }, }, { "Medion CTX1921 DVB-T USB", { &dib0700_usb_id_table[MEDION_CREATIX_CTX1921], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807x_frontend_attach, .tuner_attach = dib807x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 3, .devices = { { "DiBcom STK807xP reference design", { &dib0700_usb_id_table[DIBCOM_STK807XP], NULL }, { NULL }, }, { "Prolink Pixelview SBTVD", { &dib0700_usb_id_table[PIXELVIEW_SBTVD], NULL }, { NULL }, }, { "EvolutePC TVWay+", { &dib0700_usb_id_table[EVOLUTEPC_TVWAY_PLUS], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_NEC_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807xpvr_frontend_attach0, .tuner_attach = dib807x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk807xpvr_frontend_attach1, .tuner_attach = dib807x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom STK807xPVR reference design", { &dib0700_usb_id_table[DIBCOM_STK807XPVR], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk809x_frontend_attach, .tuner_attach = dib809x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom STK8096GP reference design", { &dib0700_usb_id_table[DIBCOM_STK8096GP], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = dib90x0_pid_filter, .pid_filter_ctrl = dib90x0_pid_filter_ctrl, .frontend_attach = stk9090m_frontend_attach, .tuner_attach = dib9090_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom STK9090M reference design", { &dib0700_usb_id_table[DIBCOM_NIM9090M], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = nim8096md_frontend_attach, .tuner_attach = nim8096md_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom NIM8096MD reference design", { &dib0700_usb_id_table[DIBCOM_NIM8096MD], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = dib90x0_pid_filter, .pid_filter_ctrl = dib90x0_pid_filter_ctrl, .frontend_attach = nim9090md_frontend_attach, .tuner_attach = nim9090md_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom NIM9090MD reference design", { &dib0700_usb_id_table[DIBCOM_NIM9090MD], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = nim7090_frontend_attach, .tuner_attach = nim7090_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom NIM7090 reference design", { &dib0700_usb_id_table[DIBCOM_NIM7090], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = tfe7090pvr_frontend0_attach, .tuner_attach = tfe7090pvr_tuner0_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), }}, }, { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = tfe7090pvr_frontend1_attach, .tuner_attach = tfe7090pvr_tuner1_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 1, .devices = { { "DiBcom TFE7090PVR reference design", { &dib0700_usb_id_table[DIBCOM_TFE7090PVR], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = pctv340e_frontend_attach, .tuner_attach = xc4000_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), }}, }, }, .num_device_descs = 2, .devices = { { "Pinnacle PCTV 340e HD Pro USB Stick", { &dib0700_usb_id_table[PINNACLE_PCTV340E], NULL }, { NULL }, }, { "Pinnacle PCTV Hybrid Stick Solo", { &dib0700_usb_id_table[PINNACLE_PCTV340E_SE], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk70x0p_pid_filter, .pid_filter_ctrl = stk70x0p_pid_filter_ctrl, .frontend_attach = tfe7790p_frontend_attach, .tuner_attach = tfe7790p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), } }, }, }, .num_device_descs = 1, .devices = { { "DiBcom TFE7790P reference design", { &dib0700_usb_id_table[DIBCOM_TFE7790P], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = tfe8096p_frontend_attach, .tuner_attach = tfe8096p_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), } }, }, }, .num_device_descs = 1, .devices = { { "DiBcom TFE8096P reference design", { &dib0700_usb_id_table[DIBCOM_TFE8096P], NULL }, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 2, .adapter = { { .num_frontends = 1, .fe = {{ .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk809x_frontend_attach, .tuner_attach = dib809x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x02), } }, .size_of_priv = sizeof(struct dib0700_adapter_state), }, { .num_frontends = 1, .fe = { { .caps = DVB_USB_ADAP_HAS_PID_FILTER | DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, .pid_filter_count = 32, .pid_filter = stk80xx_pid_filter, .pid_filter_ctrl = stk80xx_pid_filter_ctrl, .frontend_attach = stk809x_frontend1_attach, .tuner_attach = dib809x_tuner_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x03), } }, .size_of_priv = sizeof(struct dib0700_adapter_state), }, }, .num_device_descs = 1, .devices = { { "DiBcom STK8096-PVR reference design", { &dib0700_usb_id_table[PCTV_DIBCOM_STK8096PVR], &dib0700_usb_id_table[DIBCOM_STK8096PVR], NULL}, { NULL }, }, }, .rc.core = { .rc_interval = DEFAULT_RC_INTERVAL, .rc_codes = RC_MAP_DIB0700_RC5_TABLE, .module_name = "dib0700", .rc_query = dib0700_rc_query_old_firmware, .allowed_protos = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC6_MCE | RC_PROTO_BIT_NEC, .change_protocol = dib0700_change_protocol, }, }, { DIB0700_DEFAULT_DEVICE_PROPERTIES, .num_adapters = 1, .adapter = { { DIB0700_NUM_FRONTENDS(1), .fe = {{ .frontend_attach = xbox_one_attach, DIB0700_DEFAULT_STREAMING_CONFIG(0x82), } }, }, }, .num_device_descs = 1, .devices = { { "Microsoft Xbox One Digital TV Tuner", { &dib0700_usb_id_table[MICROSOFT_XBOX_ONE_TUNER], NULL }, { NULL }, }, }, }, }; int dib0700_device_count = ARRAY_SIZE(dib0700_devices);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1