| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Jacob E Keller | 1287 | 75.57% | 10 | 37.04% |
| Arkadiusz Kubalewski | 239 | 14.03% | 2 | 7.41% |
| Karol Kolacinski | 78 | 4.58% | 6 | 22.22% |
| Maciej Machnikowski | 61 | 3.58% | 1 | 3.70% |
| Alexey Dobriyan | 15 | 0.88% | 1 | 3.70% |
| Anirudh Venkataramanan | 10 | 0.59% | 3 | 11.11% |
| Sergey Temerkhanov | 5 | 0.29% | 1 | 3.70% |
| Usha Ketineni | 4 | 0.23% | 1 | 3.70% |
| Linus Torvalds | 2 | 0.12% | 1 | 3.70% |
| Peter Zijlstra | 2 | 0.12% | 1 | 3.70% |
| Total | 1703 | 27 |
/* SPDX-License-Identifier: GPL-2.0 */ /* Copyright (C) 2021, Intel Corporation. */ #ifndef _ICE_PTP_HW_H_ #define _ICE_PTP_HW_H_ #include <linux/dpll.h> enum ice_ptp_tmr_cmd { ICE_PTP_INIT_TIME, ICE_PTP_INIT_INCVAL, ICE_PTP_ADJ_TIME, ICE_PTP_ADJ_TIME_AT_TIME, ICE_PTP_READ_TIME, ICE_PTP_NOP, }; enum ice_ptp_serdes { ICE_PTP_SERDES_1G, ICE_PTP_SERDES_10G, ICE_PTP_SERDES_25G, ICE_PTP_SERDES_40G, ICE_PTP_SERDES_50G, ICE_PTP_SERDES_100G }; enum ice_ptp_link_spd { ICE_PTP_LNK_SPD_1G, ICE_PTP_LNK_SPD_10G, ICE_PTP_LNK_SPD_25G, ICE_PTP_LNK_SPD_25G_RS, ICE_PTP_LNK_SPD_40G, ICE_PTP_LNK_SPD_50G, ICE_PTP_LNK_SPD_50G_RS, ICE_PTP_LNK_SPD_100G_RS, NUM_ICE_PTP_LNK_SPD /* Must be last */ }; enum ice_ptp_fec_mode { ICE_PTP_FEC_MODE_NONE, ICE_PTP_FEC_MODE_CLAUSE74, ICE_PTP_FEC_MODE_RS_FEC }; /** * struct ice_time_ref_info_e82x * @pll_freq: Frequency of PLL that drives timer ticks in Hz * @nominal_incval: increment to generate nanoseconds in GLTSYN_TIME_L * @pps_delay: propagation delay of the PPS output signal * * Characteristic information for the various TIME_REF sources possible in the * E822 devices */ struct ice_time_ref_info_e82x { u64 pll_freq; u64 nominal_incval; u8 pps_delay; }; /** * struct ice_vernier_info_e82x * @tx_par_clk: Frequency used to calculate P_REG_PAR_TX_TUS * @rx_par_clk: Frequency used to calculate P_REG_PAR_RX_TUS * @tx_pcs_clk: Frequency used to calculate P_REG_PCS_TX_TUS * @rx_pcs_clk: Frequency used to calculate P_REG_PCS_RX_TUS * @tx_desk_rsgb_par: Frequency used to calculate P_REG_DESK_PAR_TX_TUS * @rx_desk_rsgb_par: Frequency used to calculate P_REG_DESK_PAR_RX_TUS * @tx_desk_rsgb_pcs: Frequency used to calculate P_REG_DESK_PCS_TX_TUS * @rx_desk_rsgb_pcs: Frequency used to calculate P_REG_DESK_PCS_RX_TUS * @tx_fixed_delay: Fixed Tx latency measured in 1/100th nanoseconds * @pmd_adj_divisor: Divisor used to calculate PDM alignment adjustment * @rx_fixed_delay: Fixed Rx latency measured in 1/100th nanoseconds * * Table of constants used during as part of the Vernier calibration of the Tx * and Rx timestamps. This includes frequency values used to compute TUs per * PAR/PCS clock cycle, and static delay values measured during hardware * design. * * Note that some values are not used for all link speeds, and the * P_REG_DESK_PAR* registers may represent different clock markers at * different link speeds, either the deskew marker for multi-lane link speeds * or the Reed Solomon gearbox marker for RS-FEC. */ struct ice_vernier_info_e82x { u32 tx_par_clk; u32 rx_par_clk; u32 tx_pcs_clk; u32 rx_pcs_clk; u32 tx_desk_rsgb_par; u32 rx_desk_rsgb_par; u32 tx_desk_rsgb_pcs; u32 rx_desk_rsgb_pcs; u32 tx_fixed_delay; u32 pmd_adj_divisor; u32 rx_fixed_delay; }; /** * struct ice_cgu_pll_params_e82x * @refclk_pre_div: Reference clock pre-divisor * @feedback_div: Feedback divisor * @frac_n_div: Fractional divisor * @post_pll_div: Post PLL divisor * * Clock Generation Unit parameters used to program the PLL based on the * selected TIME_REF frequency. */ struct ice_cgu_pll_params_e82x { u32 refclk_pre_div; u32 feedback_div; u32 frac_n_div; u32 post_pll_div; }; #define E810C_QSFP_C827_0_HANDLE 2 #define E810C_QSFP_C827_1_HANDLE 3 enum ice_e810_c827_idx { C827_0, C827_1 }; enum ice_phy_rclk_pins { ICE_RCLKA_PIN = 0, /* SCL pin */ ICE_RCLKB_PIN, /* SDA pin */ }; #define ICE_E810_RCLK_PINS_NUM (ICE_RCLKB_PIN + 1) #define ICE_E82X_RCLK_PINS_NUM (ICE_RCLKA_PIN + 1) #define E810T_CGU_INPUT_C827(_phy, _pin) ((_phy) * ICE_E810_RCLK_PINS_NUM + \ (_pin) + ZL_REF1P) enum ice_zl_cgu_in_pins { ZL_REF0P = 0, ZL_REF0N, ZL_REF1P, ZL_REF1N, ZL_REF2P, ZL_REF2N, ZL_REF3P, ZL_REF3N, ZL_REF4P, ZL_REF4N, NUM_ZL_CGU_INPUT_PINS }; enum ice_zl_cgu_out_pins { ZL_OUT0 = 0, ZL_OUT1, ZL_OUT2, ZL_OUT3, ZL_OUT4, ZL_OUT5, ZL_OUT6, NUM_ZL_CGU_OUTPUT_PINS }; enum ice_si_cgu_in_pins { SI_REF0P = 0, SI_REF0N, SI_REF1P, SI_REF1N, SI_REF2P, SI_REF2N, SI_REF3, SI_REF4, NUM_SI_CGU_INPUT_PINS }; enum ice_si_cgu_out_pins { SI_OUT0 = 0, SI_OUT1, SI_OUT2, SI_OUT3, SI_OUT4, NUM_SI_CGU_OUTPUT_PINS }; struct ice_cgu_pin_desc { char *name; u8 index; enum dpll_pin_type type; u32 freq_supp_num; struct dpll_pin_frequency *freq_supp; }; extern const struct ice_cgu_pll_params_e82x e822_cgu_params[NUM_ICE_TIME_REF_FREQ]; #define E810C_QSFP_C827_0_HANDLE 2 #define E810C_QSFP_C827_1_HANDLE 3 /* Table of constants related to possible TIME_REF sources */ extern const struct ice_time_ref_info_e82x e822_time_ref[NUM_ICE_TIME_REF_FREQ]; /* Table of constants for Vernier calibration on E822 */ extern const struct ice_vernier_info_e82x e822_vernier[NUM_ICE_PTP_LNK_SPD]; /* Increment value to generate nanoseconds in the GLTSYN_TIME_L register for * the E810 devices. Based off of a PLL with an 812.5 MHz frequency. */ #define ICE_PTP_NOMINAL_INCVAL_E810 0x13b13b13bULL /* Device agnostic functions */ u8 ice_get_ptp_src_clock_index(struct ice_hw *hw); bool ice_ptp_lock(struct ice_hw *hw); void ice_ptp_unlock(struct ice_hw *hw); void ice_ptp_src_cmd(struct ice_hw *hw, enum ice_ptp_tmr_cmd cmd); int ice_ptp_init_time(struct ice_hw *hw, u64 time); int ice_ptp_write_incval(struct ice_hw *hw, u64 incval); int ice_ptp_write_incval_locked(struct ice_hw *hw, u64 incval); int ice_ptp_adj_clock(struct ice_hw *hw, s32 adj); int ice_read_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx, u64 *tstamp); int ice_clear_phy_tstamp(struct ice_hw *hw, u8 block, u8 idx); void ice_ptp_reset_ts_memory(struct ice_hw *hw); int ice_ptp_init_phc(struct ice_hw *hw); int ice_get_phy_tx_tstamp_ready(struct ice_hw *hw, u8 block, u64 *tstamp_ready); /* E822 family functions */ int ice_read_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 *val); int ice_write_quad_reg_e82x(struct ice_hw *hw, u8 quad, u16 offset, u32 val); void ice_ptp_reset_ts_memory_quad_e82x(struct ice_hw *hw, u8 quad); /** * ice_e82x_time_ref - Get the current TIME_REF from capabilities * @hw: pointer to the HW structure * * Returns the current TIME_REF from the capabilities structure. */ static inline enum ice_time_ref_freq ice_e82x_time_ref(struct ice_hw *hw) { return hw->func_caps.ts_func_info.time_ref; } /** * ice_set_e82x_time_ref - Set new TIME_REF * @hw: pointer to the HW structure * @time_ref: new TIME_REF to set * * Update the TIME_REF in the capabilities structure in response to some * change, such as an update to the CGU registers. */ static inline void ice_set_e82x_time_ref(struct ice_hw *hw, enum ice_time_ref_freq time_ref) { hw->func_caps.ts_func_info.time_ref = time_ref; } static inline u64 ice_e82x_pll_freq(enum ice_time_ref_freq time_ref) { return e822_time_ref[time_ref].pll_freq; } static inline u64 ice_e82x_nominal_incval(enum ice_time_ref_freq time_ref) { return e822_time_ref[time_ref].nominal_incval; } static inline u64 ice_e82x_pps_delay(enum ice_time_ref_freq time_ref) { return e822_time_ref[time_ref].pps_delay; } /* E822 Vernier calibration functions */ int ice_stop_phy_timer_e82x(struct ice_hw *hw, u8 port, bool soft_reset); int ice_start_phy_timer_e82x(struct ice_hw *hw, u8 port); int ice_phy_cfg_tx_offset_e82x(struct ice_hw *hw, u8 port); int ice_phy_cfg_rx_offset_e82x(struct ice_hw *hw, u8 port); /* E810 family functions */ int ice_ptp_init_phy_e810(struct ice_hw *hw); int ice_read_sma_ctrl_e810t(struct ice_hw *hw, u8 *data); int ice_write_sma_ctrl_e810t(struct ice_hw *hw, u8 data); int ice_read_pca9575_reg_e810t(struct ice_hw *hw, u8 offset, u8 *data); bool ice_is_pca9575_present(struct ice_hw *hw); enum dpll_pin_type ice_cgu_get_pin_type(struct ice_hw *hw, u8 pin, bool input); struct dpll_pin_frequency * ice_cgu_get_pin_freq_supp(struct ice_hw *hw, u8 pin, bool input, u8 *num); const char *ice_cgu_get_pin_name(struct ice_hw *hw, u8 pin, bool input); int ice_get_cgu_state(struct ice_hw *hw, u8 dpll_idx, enum dpll_lock_status last_dpll_state, u8 *pin, u8 *ref_state, u8 *eec_mode, s64 *phase_offset, enum dpll_lock_status *dpll_state); int ice_get_cgu_rclk_pin_info(struct ice_hw *hw, u8 *base_idx, u8 *pin_num); void ice_ptp_init_phy_model(struct ice_hw *hw); int ice_cgu_get_output_pin_state_caps(struct ice_hw *hw, u8 pin_id, unsigned long *caps); #define PFTSYN_SEM_BYTES 4 #define ICE_PTP_CLOCK_INDEX_0 0x00 #define ICE_PTP_CLOCK_INDEX_1 0x01 /* PHY timer commands */ #define SEL_CPK_SRC 8 #define SEL_PHY_SRC 3 /* Time Sync command Definitions */ #define GLTSYN_CMD_INIT_TIME BIT(0) #define GLTSYN_CMD_INIT_INCVAL BIT(1) #define GLTSYN_CMD_INIT_TIME_INCVAL (BIT(0) | BIT(1)) #define GLTSYN_CMD_ADJ_TIME BIT(2) #define GLTSYN_CMD_ADJ_INIT_TIME (BIT(2) | BIT(3)) #define GLTSYN_CMD_READ_TIME BIT(7) /* PHY port Time Sync command definitions */ #define PHY_CMD_INIT_TIME BIT(0) #define PHY_CMD_INIT_INCVAL BIT(1) #define PHY_CMD_ADJ_TIME (BIT(0) | BIT(1)) #define PHY_CMD_ADJ_TIME_AT_TIME (BIT(0) | BIT(2)) #define PHY_CMD_READ_TIME (BIT(0) | BIT(1) | BIT(2)) #define TS_CMD_MASK_E810 0xFF #define TS_CMD_MASK 0xF #define SYNC_EXEC_CMD 0x3 /* Macros to derive port low and high addresses on both quads */ #define P_Q0_L(a, p) ((((a) + (0x2000 * (p)))) & 0xFFFF) #define P_Q0_H(a, p) ((((a) + (0x2000 * (p)))) >> 16) #define P_Q1_L(a, p) ((((a) - (0x2000 * ((p) - ICE_PORTS_PER_QUAD)))) & 0xFFFF) #define P_Q1_H(a, p) ((((a) - (0x2000 * ((p) - ICE_PORTS_PER_QUAD)))) >> 16) /* PHY QUAD register base addresses */ #define Q_0_BASE 0x94000 #define Q_1_BASE 0x114000 /* Timestamp memory reset registers */ #define Q_REG_TS_CTRL 0x618 #define Q_REG_TS_CTRL_S 0 #define Q_REG_TS_CTRL_M BIT(0) /* Timestamp availability status registers */ #define Q_REG_TX_MEMORY_STATUS_L 0xCF0 #define Q_REG_TX_MEMORY_STATUS_U 0xCF4 /* Tx FIFO status registers */ #define Q_REG_FIFO23_STATUS 0xCF8 #define Q_REG_FIFO01_STATUS 0xCFC #define Q_REG_FIFO02_S 0 #define Q_REG_FIFO02_M ICE_M(0x3FF, 0) #define Q_REG_FIFO13_S 10 #define Q_REG_FIFO13_M ICE_M(0x3FF, 10) /* Interrupt control Config registers */ #define Q_REG_TX_MEM_GBL_CFG 0xC08 #define Q_REG_TX_MEM_GBL_CFG_LANE_TYPE_S 0 #define Q_REG_TX_MEM_GBL_CFG_LANE_TYPE_M BIT(0) #define Q_REG_TX_MEM_GBL_CFG_TX_TYPE_S 1 #define Q_REG_TX_MEM_GBL_CFG_TX_TYPE_M ICE_M(0xFF, 1) #define Q_REG_TX_MEM_GBL_CFG_INTR_THR_S 9 #define Q_REG_TX_MEM_GBL_CFG_INTR_THR_M ICE_M(0x3F, 9) #define Q_REG_TX_MEM_GBL_CFG_INTR_ENA_S 15 #define Q_REG_TX_MEM_GBL_CFG_INTR_ENA_M BIT(15) /* Tx Timestamp data registers */ #define Q_REG_TX_MEMORY_BANK_START 0xA00 /* PHY port register base addresses */ #define P_0_BASE 0x80000 #define P_4_BASE 0x106000 /* Timestamp init registers */ #define P_REG_RX_TIMER_INC_PRE_L 0x46C #define P_REG_RX_TIMER_INC_PRE_U 0x470 #define P_REG_TX_TIMER_INC_PRE_L 0x44C #define P_REG_TX_TIMER_INC_PRE_U 0x450 /* Timestamp match and adjust target registers */ #define P_REG_RX_TIMER_CNT_ADJ_L 0x474 #define P_REG_RX_TIMER_CNT_ADJ_U 0x478 #define P_REG_TX_TIMER_CNT_ADJ_L 0x454 #define P_REG_TX_TIMER_CNT_ADJ_U 0x458 /* Timestamp capture registers */ #define P_REG_RX_CAPTURE_L 0x4D8 #define P_REG_RX_CAPTURE_U 0x4DC #define P_REG_TX_CAPTURE_L 0x4B4 #define P_REG_TX_CAPTURE_U 0x4B8 /* Timestamp PHY incval registers */ #define P_REG_TIMETUS_L 0x410 #define P_REG_TIMETUS_U 0x414 #define P_REG_40B_LOW_M 0xFF #define P_REG_40B_HIGH_S 8 /* PHY window length registers */ #define P_REG_WL 0x40C #define PTP_VERNIER_WL 0x111ed /* PHY start registers */ #define P_REG_PS 0x408 #define P_REG_PS_START_S 0 #define P_REG_PS_START_M BIT(0) #define P_REG_PS_BYPASS_MODE_S 1 #define P_REG_PS_BYPASS_MODE_M BIT(1) #define P_REG_PS_ENA_CLK_S 2 #define P_REG_PS_ENA_CLK_M BIT(2) #define P_REG_PS_LOAD_OFFSET_S 3 #define P_REG_PS_LOAD_OFFSET_M BIT(3) #define P_REG_PS_SFT_RESET_S 11 #define P_REG_PS_SFT_RESET_M BIT(11) /* PHY offset valid registers */ #define P_REG_TX_OV_STATUS 0x4D4 #define P_REG_TX_OV_STATUS_OV_S 0 #define P_REG_TX_OV_STATUS_OV_M BIT(0) #define P_REG_RX_OV_STATUS 0x4F8 #define P_REG_RX_OV_STATUS_OV_S 0 #define P_REG_RX_OV_STATUS_OV_M BIT(0) /* PHY offset ready registers */ #define P_REG_TX_OR 0x45C #define P_REG_RX_OR 0x47C /* PHY total offset registers */ #define P_REG_TOTAL_RX_OFFSET_L 0x460 #define P_REG_TOTAL_RX_OFFSET_U 0x464 #define P_REG_TOTAL_TX_OFFSET_L 0x440 #define P_REG_TOTAL_TX_OFFSET_U 0x444 /* Timestamp PAR/PCS registers */ #define P_REG_UIX66_10G_40G_L 0x480 #define P_REG_UIX66_10G_40G_U 0x484 #define P_REG_UIX66_25G_100G_L 0x488 #define P_REG_UIX66_25G_100G_U 0x48C #define P_REG_DESK_PAR_RX_TUS_L 0x490 #define P_REG_DESK_PAR_RX_TUS_U 0x494 #define P_REG_DESK_PAR_TX_TUS_L 0x498 #define P_REG_DESK_PAR_TX_TUS_U 0x49C #define P_REG_DESK_PCS_RX_TUS_L 0x4A0 #define P_REG_DESK_PCS_RX_TUS_U 0x4A4 #define P_REG_DESK_PCS_TX_TUS_L 0x4A8 #define P_REG_DESK_PCS_TX_TUS_U 0x4AC #define P_REG_PAR_RX_TUS_L 0x420 #define P_REG_PAR_RX_TUS_U 0x424 #define P_REG_PAR_TX_TUS_L 0x428 #define P_REG_PAR_TX_TUS_U 0x42C #define P_REG_PCS_RX_TUS_L 0x430 #define P_REG_PCS_RX_TUS_U 0x434 #define P_REG_PCS_TX_TUS_L 0x438 #define P_REG_PCS_TX_TUS_U 0x43C #define P_REG_PAR_RX_TIME_L 0x4F0 #define P_REG_PAR_RX_TIME_U 0x4F4 #define P_REG_PAR_TX_TIME_L 0x4CC #define P_REG_PAR_TX_TIME_U 0x4D0 #define P_REG_PAR_PCS_RX_OFFSET_L 0x4E8 #define P_REG_PAR_PCS_RX_OFFSET_U 0x4EC #define P_REG_PAR_PCS_TX_OFFSET_L 0x4C4 #define P_REG_PAR_PCS_TX_OFFSET_U 0x4C8 #define P_REG_LINK_SPEED 0x4FC #define P_REG_LINK_SPEED_SERDES_S 0 #define P_REG_LINK_SPEED_SERDES_M ICE_M(0x7, 0) #define P_REG_LINK_SPEED_FEC_MODE_S 3 #define P_REG_LINK_SPEED_FEC_MODE_M ICE_M(0x3, 3) #define P_REG_LINK_SPEED_FEC_MODE(reg) \ (((reg) & P_REG_LINK_SPEED_FEC_MODE_M) >> \ P_REG_LINK_SPEED_FEC_MODE_S) /* PHY timestamp related registers */ #define P_REG_PMD_ALIGNMENT 0x0FC #define P_REG_RX_80_TO_160_CNT 0x6FC #define P_REG_RX_80_TO_160_CNT_RXCYC_S 0 #define P_REG_RX_80_TO_160_CNT_RXCYC_M BIT(0) #define P_REG_RX_40_TO_160_CNT 0x8FC #define P_REG_RX_40_TO_160_CNT_RXCYC_S 0 #define P_REG_RX_40_TO_160_CNT_RXCYC_M ICE_M(0x3, 0) /* Rx FIFO status registers */ #define P_REG_RX_OV_FS 0x4F8 #define P_REG_RX_OV_FS_FIFO_STATUS_S 2 #define P_REG_RX_OV_FS_FIFO_STATUS_M ICE_M(0x3FF, 2) /* Timestamp command registers */ #define P_REG_TX_TMR_CMD 0x448 #define P_REG_RX_TMR_CMD 0x468 /* E810 timesync enable register */ #define ETH_GLTSYN_ENA(_i) (0x03000348 + ((_i) * 4)) /* E810 shadow init time registers */ #define ETH_GLTSYN_SHTIME_0(i) (0x03000368 + ((i) * 32)) #define ETH_GLTSYN_SHTIME_L(i) (0x0300036C + ((i) * 32)) /* E810 shadow time adjust registers */ #define ETH_GLTSYN_SHADJ_L(_i) (0x03000378 + ((_i) * 32)) #define ETH_GLTSYN_SHADJ_H(_i) (0x0300037C + ((_i) * 32)) /* E810 timer command register */ #define ETH_GLTSYN_CMD 0x03000344 /* Source timer incval macros */ #define INCVAL_HIGH_M 0xFF /* Timestamp block macros */ #define TS_VALID BIT(0) #define TS_LOW_M 0xFFFFFFFF #define TS_HIGH_M 0xFF #define TS_HIGH_S 32 #define TS_PHY_LOW_M 0xFF #define TS_PHY_HIGH_M 0xFFFFFFFF #define TS_PHY_HIGH_S 8 #define BYTES_PER_IDX_ADDR_L_U 8 #define BYTES_PER_IDX_ADDR_L 4 /* Tx timestamp low latency read definitions */ #define TS_LL_READ_RETRIES 200 #define TS_LL_READ_TS_HIGH GENMASK(23, 16) #define TS_LL_READ_TS_IDX GENMASK(29, 24) #define TS_LL_READ_TS_INTR BIT(30) #define TS_LL_READ_TS BIT(31) /* Internal PHY timestamp address */ #define TS_L(a, idx) ((a) + ((idx) * BYTES_PER_IDX_ADDR_L_U)) #define TS_H(a, idx) ((a) + ((idx) * BYTES_PER_IDX_ADDR_L_U + \ BYTES_PER_IDX_ADDR_L)) /* External PHY timestamp address */ #define TS_EXT(a, port, idx) ((a) + (0x1000 * (port)) + \ ((idx) * BYTES_PER_IDX_ADDR_L_U)) #define LOW_TX_MEMORY_BANK_START 0x03090000 #define HIGH_TX_MEMORY_BANK_START 0x03090004 /* E810T SMA controller pin control */ #define ICE_SMA1_DIR_EN_E810T BIT(4) #define ICE_SMA1_TX_EN_E810T BIT(5) #define ICE_SMA2_UFL2_RX_DIS_E810T BIT(3) #define ICE_SMA2_DIR_EN_E810T BIT(6) #define ICE_SMA2_TX_EN_E810T BIT(7) #define ICE_SMA1_MASK_E810T (ICE_SMA1_DIR_EN_E810T | \ ICE_SMA1_TX_EN_E810T) #define ICE_SMA2_MASK_E810T (ICE_SMA2_UFL2_RX_DIS_E810T | \ ICE_SMA2_DIR_EN_E810T | \ ICE_SMA2_TX_EN_E810T) #define ICE_ALL_SMA_MASK_E810T (ICE_SMA1_MASK_E810T | \ ICE_SMA2_MASK_E810T) #define ICE_SMA_MIN_BIT_E810T 3 #define ICE_SMA_MAX_BIT_E810T 7 #define ICE_PCA9575_P1_OFFSET 8 /* E810T PCA9575 IO controller registers */ #define ICE_PCA9575_P0_IN 0x0 /* E810T PCA9575 IO controller pin control */ #define ICE_E810T_P0_GNSS_PRSNT_N BIT(4) #endif /* _ICE_PTP_HW_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1