| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Ansuel Smith | 567 | 62.72% | 8 | 36.36% |
| Matus Ujhelyi | 113 | 12.50% | 1 | 4.55% |
| Michael Walle | 69 | 7.63% | 2 | 9.09% |
| Oleksij Rempel | 40 | 4.42% | 1 | 4.55% |
| Martin Blumenstingl | 36 | 3.98% | 2 | 9.09% |
| Luo Jie | 35 | 3.87% | 4 | 18.18% |
| Russell King | 28 | 3.10% | 1 | 4.55% |
| Robert Hancock | 8 | 0.88% | 1 | 4.55% |
| Daniel Mack | 4 | 0.44% | 1 | 4.55% |
| Mugunthan V N | 4 | 0.44% | 1 | 4.55% |
| Total | 904 | 22 |
/* SPDX-License-Identifier: GPL-2.0 */ #define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10 #define AT803X_SFC_ASSERT_CRS BIT(11) #define AT803X_SFC_FORCE_LINK BIT(10) #define AT803X_SFC_MDI_CROSSOVER_MODE_M GENMASK(6, 5) #define AT803X_SFC_AUTOMATIC_CROSSOVER 0x3 #define AT803X_SFC_MANUAL_MDIX 0x1 #define AT803X_SFC_MANUAL_MDI 0x0 #define AT803X_SFC_SQE_TEST BIT(2) #define AT803X_SFC_POLARITY_REVERSAL BIT(1) #define AT803X_SFC_DISABLE_JABBER BIT(0) #define AT803X_SPECIFIC_STATUS 0x11 #define AT803X_SS_SPEED_MASK GENMASK(15, 14) #define AT803X_SS_SPEED_1000 2 #define AT803X_SS_SPEED_100 1 #define AT803X_SS_SPEED_10 0 #define AT803X_SS_DUPLEX BIT(13) #define AT803X_SS_SPEED_DUPLEX_RESOLVED BIT(11) #define AT803X_SS_MDIX BIT(6) #define QCA808X_SS_SPEED_MASK GENMASK(9, 7) #define QCA808X_SS_SPEED_2500 4 #define AT803X_INTR_ENABLE 0x12 #define AT803X_INTR_ENABLE_AUTONEG_ERR BIT(15) #define AT803X_INTR_ENABLE_SPEED_CHANGED BIT(14) #define AT803X_INTR_ENABLE_DUPLEX_CHANGED BIT(13) #define AT803X_INTR_ENABLE_PAGE_RECEIVED BIT(12) #define AT803X_INTR_ENABLE_LINK_FAIL BIT(11) #define AT803X_INTR_ENABLE_LINK_SUCCESS BIT(10) #define AT803X_INTR_ENABLE_LINK_FAIL_BX BIT(8) #define AT803X_INTR_ENABLE_LINK_SUCCESS_BX BIT(7) #define AT803X_INTR_ENABLE_WIRESPEED_DOWNGRADE BIT(5) #define AT803X_INTR_ENABLE_POLARITY_CHANGED BIT(1) #define AT803X_INTR_ENABLE_WOL BIT(0) #define AT803X_INTR_STATUS 0x13 #define AT803X_SMART_SPEED 0x14 #define AT803X_SMART_SPEED_ENABLE BIT(5) #define AT803X_SMART_SPEED_RETRY_LIMIT_MASK GENMASK(4, 2) #define AT803X_SMART_SPEED_BYPASS_TIMER BIT(1) #define AT803X_CDT 0x16 #define AT803X_CDT_MDI_PAIR_MASK GENMASK(9, 8) #define AT803X_CDT_ENABLE_TEST BIT(0) #define AT803X_CDT_STATUS 0x1c #define AT803X_CDT_STATUS_STAT_NORMAL 0 #define AT803X_CDT_STATUS_STAT_SHORT 1 #define AT803X_CDT_STATUS_STAT_OPEN 2 #define AT803X_CDT_STATUS_STAT_FAIL 3 #define AT803X_CDT_STATUS_STAT_MASK GENMASK(9, 8) #define AT803X_CDT_STATUS_DELTA_TIME_MASK GENMASK(7, 0) #define QCA808X_CDT_ENABLE_TEST BIT(15) #define QCA808X_CDT_INTER_CHECK_DIS BIT(13) #define QCA808X_CDT_STATUS BIT(11) #define QCA808X_CDT_LENGTH_UNIT BIT(10) #define QCA808X_MMD3_CDT_STATUS 0x8064 #define QCA808X_MMD3_CDT_DIAG_PAIR_A 0x8065 #define QCA808X_MMD3_CDT_DIAG_PAIR_B 0x8066 #define QCA808X_MMD3_CDT_DIAG_PAIR_C 0x8067 #define QCA808X_MMD3_CDT_DIAG_PAIR_D 0x8068 #define QCA808X_CDT_DIAG_LENGTH_SAME_SHORT GENMASK(15, 8) #define QCA808X_CDT_DIAG_LENGTH_CROSS_SHORT GENMASK(7, 0) #define QCA808X_CDT_CODE_PAIR_A GENMASK(15, 12) #define QCA808X_CDT_CODE_PAIR_B GENMASK(11, 8) #define QCA808X_CDT_CODE_PAIR_C GENMASK(7, 4) #define QCA808X_CDT_CODE_PAIR_D GENMASK(3, 0) #define QCA808X_CDT_STATUS_STAT_TYPE GENMASK(1, 0) #define QCA808X_CDT_STATUS_STAT_FAIL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 0) #define QCA808X_CDT_STATUS_STAT_NORMAL FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 1) #define QCA808X_CDT_STATUS_STAT_SAME_OPEN FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 2) #define QCA808X_CDT_STATUS_STAT_SAME_SHORT FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_TYPE, 3) #define QCA808X_CDT_STATUS_STAT_MDI GENMASK(3, 2) #define QCA808X_CDT_STATUS_STAT_MDI1 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 1) #define QCA808X_CDT_STATUS_STAT_MDI2 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 2) #define QCA808X_CDT_STATUS_STAT_MDI3 FIELD_PREP_CONST(QCA808X_CDT_STATUS_STAT_MDI, 3) /* NORMAL are MDI with type set to 0 */ #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI1 #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ QCA808X_CDT_STATUS_STAT_MDI1) #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI1_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ QCA808X_CDT_STATUS_STAT_MDI1) #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI2 #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ QCA808X_CDT_STATUS_STAT_MDI2) #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI2_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ QCA808X_CDT_STATUS_STAT_MDI2) #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_NORMAL QCA808X_CDT_STATUS_STAT_MDI3 #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_OPEN (QCA808X_CDT_STATUS_STAT_SAME_OPEN |\ QCA808X_CDT_STATUS_STAT_MDI3) #define QCA808X_CDT_STATUS_STAT_CROSS_SHORT_WITH_MDI3_SAME_SHORT (QCA808X_CDT_STATUS_STAT_SAME_SHORT |\ QCA808X_CDT_STATUS_STAT_MDI3) /* Added for reference of existence but should be handled by wait_for_completion already */ #define QCA808X_CDT_STATUS_STAT_BUSY (BIT(1) | BIT(3)) #define QCA808X_MMD7_LED_GLOBAL 0x8073 #define QCA808X_LED_BLINK_1 GENMASK(11, 6) #define QCA808X_LED_BLINK_2 GENMASK(5, 0) /* Values are the same for both BLINK_1 and BLINK_2 */ #define QCA808X_LED_BLINK_FREQ_MASK GENMASK(5, 3) #define QCA808X_LED_BLINK_FREQ_2HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x0) #define QCA808X_LED_BLINK_FREQ_4HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x1) #define QCA808X_LED_BLINK_FREQ_8HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x2) #define QCA808X_LED_BLINK_FREQ_16HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x3) #define QCA808X_LED_BLINK_FREQ_32HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x4) #define QCA808X_LED_BLINK_FREQ_64HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x5) #define QCA808X_LED_BLINK_FREQ_128HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x6) #define QCA808X_LED_BLINK_FREQ_256HZ FIELD_PREP(QCA808X_LED_BLINK_FREQ_MASK, 0x7) #define QCA808X_LED_BLINK_DUTY_MASK GENMASK(2, 0) #define QCA808X_LED_BLINK_DUTY_50_50 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x0) #define QCA808X_LED_BLINK_DUTY_75_25 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x1) #define QCA808X_LED_BLINK_DUTY_25_75 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x2) #define QCA808X_LED_BLINK_DUTY_33_67 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x3) #define QCA808X_LED_BLINK_DUTY_67_33 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x4) #define QCA808X_LED_BLINK_DUTY_17_83 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x5) #define QCA808X_LED_BLINK_DUTY_83_17 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x6) #define QCA808X_LED_BLINK_DUTY_8_92 FIELD_PREP(QCA808X_LED_BLINK_DUTY_MASK, 0x7) /* LED hw control pattern is the same for every LED */ #define QCA808X_LED_PATTERN_MASK GENMASK(15, 0) #define QCA808X_LED_SPEED2500_ON BIT(15) #define QCA808X_LED_SPEED2500_BLINK BIT(14) /* Follow blink trigger even if duplex or speed condition doesn't match */ #define QCA808X_LED_BLINK_CHECK_BYPASS BIT(13) #define QCA808X_LED_FULL_DUPLEX_ON BIT(12) #define QCA808X_LED_HALF_DUPLEX_ON BIT(11) #define QCA808X_LED_TX_BLINK BIT(10) #define QCA808X_LED_RX_BLINK BIT(9) #define QCA808X_LED_TX_ON_10MS BIT(8) #define QCA808X_LED_RX_ON_10MS BIT(7) #define QCA808X_LED_SPEED1000_ON BIT(6) #define QCA808X_LED_SPEED100_ON BIT(5) #define QCA808X_LED_SPEED10_ON BIT(4) #define QCA808X_LED_COLLISION_BLINK BIT(3) #define QCA808X_LED_SPEED1000_BLINK BIT(2) #define QCA808X_LED_SPEED100_BLINK BIT(1) #define QCA808X_LED_SPEED10_BLINK BIT(0) /* LED force ctrl is the same for every LED * No documentation exist for this, not even internal one * with NDA as QCOM gives only info about configuring * hw control pattern rules and doesn't indicate any way * to force the LED to specific mode. * These define comes from reverse and testing and maybe * lack of some info or some info are not entirely correct. * For the basic LED control and hw control these finding * are enough to support LED control in all the required APIs. * * On doing some comparison with implementation with qca807x, * it was found that it's 1:1 equal to it and confirms all the * reverse done. It was also found further specification with the * force mode and the blink modes. */ #define QCA808X_LED_FORCE_EN BIT(15) #define QCA808X_LED_FORCE_MODE_MASK GENMASK(14, 13) #define QCA808X_LED_FORCE_BLINK_1 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x3) #define QCA808X_LED_FORCE_BLINK_2 FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x2) #define QCA808X_LED_FORCE_ON FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x1) #define QCA808X_LED_FORCE_OFF FIELD_PREP(QCA808X_LED_FORCE_MODE_MASK, 0x0) #define AT803X_LOC_MAC_ADDR_0_15_OFFSET 0x804C #define AT803X_LOC_MAC_ADDR_16_31_OFFSET 0x804B #define AT803X_LOC_MAC_ADDR_32_47_OFFSET 0x804A #define AT803X_DEBUG_ADDR 0x1D #define AT803X_DEBUG_DATA 0x1E #define AT803X_DEBUG_ANALOG_TEST_CTRL 0x00 #define QCA8327_DEBUG_MANU_CTRL_EN BIT(2) #define QCA8337_DEBUG_MANU_CTRL_EN GENMASK(3, 2) #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) #define AT803X_DEBUG_SYSTEM_CTRL_MODE 0x05 #define AT803X_DEBUG_TX_CLK_DLY_EN BIT(8) #define AT803X_DEBUG_REG_HIB_CTRL 0x0b #define AT803X_DEBUG_HIB_CTRL_SEL_RST_80U BIT(10) #define AT803X_DEBUG_HIB_CTRL_EN_ANY_CHANGE BIT(13) #define AT803X_DEBUG_HIB_CTRL_PS_HIB_EN BIT(15) #define AT803X_DEFAULT_DOWNSHIFT 5 #define AT803X_MIN_DOWNSHIFT 2 #define AT803X_MAX_DOWNSHIFT 9 enum stat_access_type { PHY, MMD }; struct at803x_hw_stat { const char *string; u8 reg; u32 mask; enum stat_access_type access_type; }; struct at803x_ss_mask { u16 speed_mask; u8 speed_shift; }; int at803x_debug_reg_read(struct phy_device *phydev, u16 reg); int at803x_debug_reg_mask(struct phy_device *phydev, u16 reg, u16 clear, u16 set); int at803x_debug_reg_write(struct phy_device *phydev, u16 reg, u16 data); int at803x_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); void at803x_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol); int at803x_ack_interrupt(struct phy_device *phydev); int at803x_config_intr(struct phy_device *phydev); irqreturn_t at803x_handle_interrupt(struct phy_device *phydev); int at803x_read_specific_status(struct phy_device *phydev, struct at803x_ss_mask ss_mask); int at803x_config_mdix(struct phy_device *phydev, u8 ctrl); int at803x_prepare_config_aneg(struct phy_device *phydev); int at803x_read_status(struct phy_device *phydev); int at803x_get_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, void *data); int at803x_set_tunable(struct phy_device *phydev, struct ethtool_tunable *tuna, const void *data); int at803x_cdt_fault_length(int dt); int at803x_cdt_start(struct phy_device *phydev, u32 cdt_start); int at803x_cdt_wait_for_completion(struct phy_device *phydev, u32 cdt_en); int qca808x_cable_test_get_status(struct phy_device *phydev, bool *finished); int qca808x_led_reg_hw_control_enable(struct phy_device *phydev, u16 reg); bool qca808x_led_reg_hw_control_status(struct phy_device *phydev, u16 reg); int qca808x_led_reg_brightness_set(struct phy_device *phydev, u16 reg, enum led_brightness value); int qca808x_led_reg_blink_set(struct phy_device *phydev, u16 reg, unsigned long *delay_on, unsigned long *delay_off);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1