Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kalle Valo | 785 | 59.97% | 5 | 11.90% |
Govind Singh | 241 | 18.41% | 5 | 11.90% |
Michal Kazior | 129 | 9.85% | 14 | 33.33% |
Rakesh Pillai | 49 | 3.74% | 5 | 11.90% |
Raja Mani | 40 | 3.06% | 1 | 2.38% |
Rajkumar Manoharan | 20 | 1.53% | 2 | 4.76% |
Vasanthakumar Thiagarajan | 15 | 1.15% | 2 | 4.76% |
Doug Anderson | 13 | 0.99% | 1 | 2.38% |
Mohammed Shafi Shajakhan | 6 | 0.46% | 1 | 2.38% |
Kees Cook | 5 | 0.38% | 1 | 2.38% |
Ben Greear | 2 | 0.15% | 1 | 2.38% |
Gustavo A. R. Silva | 1 | 0.08% | 1 | 2.38% |
Ashok Raj Nagarajan | 1 | 0.08% | 1 | 2.38% |
Maharaja Kennadyrajan | 1 | 0.08% | 1 | 2.38% |
Brian Norris | 1 | 0.08% | 1 | 2.38% |
Total | 1309 | 42 |
/* SPDX-License-Identifier: ISC */ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. * Copyright (c) 2018 The Linux Foundation. All rights reserved. */ #ifndef _CE_H_ #define _CE_H_ #include "hif.h" #define CE_HTT_H2T_MSG_SRC_NENTRIES 8192 /* Descriptor rings must be aligned to this boundary */ #define CE_DESC_RING_ALIGN 8 #define CE_SEND_FLAG_GATHER 0x00010000 /* * Copy Engine support: low-level Target-side Copy Engine API. * This is a hardware access layer used by code that understands * how to use copy engines. */ struct ath10k_ce_pipe; #define CE_DESC_FLAGS_GATHER (1 << 0) #define CE_DESC_FLAGS_BYTE_SWAP (1 << 1) #define CE_WCN3990_DESC_FLAGS_GATHER BIT(31) #define CE_DESC_ADDR_MASK GENMASK_ULL(34, 0) #define CE_DESC_ADDR_HI_MASK GENMASK(4, 0) /* Following desc flags are used in QCA99X0 */ #define CE_DESC_FLAGS_HOST_INT_DIS (1 << 2) #define CE_DESC_FLAGS_TGT_INT_DIS (1 << 3) #define CE_DESC_FLAGS_META_DATA_MASK ar->hw_values->ce_desc_meta_data_mask #define CE_DESC_FLAGS_META_DATA_LSB ar->hw_values->ce_desc_meta_data_lsb #define CE_DDR_RRI_MASK GENMASK(15, 0) #define CE_DDR_DRRI_SHIFT 16 struct ce_desc { __le32 addr; __le16 nbytes; __le16 flags; /* %CE_DESC_FLAGS_ */ }; struct ce_desc_64 { __le64 addr; __le16 nbytes; /* length in register map */ __le16 flags; /* fw_metadata_high */ __le32 toeplitz_hash_result; }; #define CE_DESC_SIZE sizeof(struct ce_desc) #define CE_DESC_SIZE_64 sizeof(struct ce_desc_64) struct ath10k_ce_ring { /* Number of entries in this ring; must be power of 2 */ unsigned int nentries; unsigned int nentries_mask; /* * For dest ring, this is the next index to be processed * by software after it was/is received into. * * For src ring, this is the last descriptor that was sent * and completion processed by software. * * Regardless of src or dest ring, this is an invariant * (modulo ring size): * write index >= read index >= sw_index */ unsigned int sw_index; /* cached copy */ unsigned int write_index; /* * For src ring, this is the next index not yet processed by HW. * This is a cached copy of the real HW index (read index), used * for avoiding reading the HW index register more often than * necessary. * This extends the invariant: * write index >= read index >= hw_index >= sw_index * * For dest ring, this is currently unused. */ /* cached copy */ unsigned int hw_index; /* Start of DMA-coherent area reserved for descriptors */ /* Host address space */ void *base_addr_owner_space_unaligned; /* CE address space */ dma_addr_t base_addr_ce_space_unaligned; /* * Actual start of descriptors. * Aligned to descriptor-size boundary. * Points into reserved DMA-coherent area, above. */ /* Host address space */ void *base_addr_owner_space; /* CE address space */ dma_addr_t base_addr_ce_space; char *shadow_base_unaligned; struct ce_desc_64 *shadow_base; /* keep last */ void *per_transfer_context[] __counted_by(nentries); }; struct ath10k_ce_pipe { struct ath10k *ar; unsigned int id; unsigned int attr_flags; u32 ctrl_addr; void (*send_cb)(struct ath10k_ce_pipe *); void (*recv_cb)(struct ath10k_ce_pipe *); unsigned int src_sz_max; struct ath10k_ce_ring *src_ring; struct ath10k_ce_ring *dest_ring; const struct ath10k_ce_ops *ops; }; /* Copy Engine settable attributes */ struct ce_attr; struct ath10k_bus_ops { u32 (*read32)(struct ath10k *ar, u32 offset); void (*write32)(struct ath10k *ar, u32 offset, u32 value); int (*get_num_banks)(struct ath10k *ar); }; static inline struct ath10k_ce *ath10k_ce_priv(struct ath10k *ar) { return (struct ath10k_ce *)ar->ce_priv; } struct ath10k_ce { /* protects CE info */ spinlock_t ce_lock; const struct ath10k_bus_ops *bus_ops; struct ath10k_ce_pipe ce_states[CE_COUNT_MAX]; u32 *vaddr_rri; dma_addr_t paddr_rri; }; /*==================Send====================*/ /* ath10k_ce_send flags */ #define CE_SEND_FLAG_BYTE_SWAP 1 /* * Queue a source buffer to be sent to an anonymous destination buffer. * ce - which copy engine to use * buffer - address of buffer * nbytes - number of bytes to send * transfer_id - arbitrary ID; reflected to destination * flags - CE_SEND_FLAG_* values * Returns 0 on success; otherwise an error status. * * Note: If no flags are specified, use CE's default data swap mode. * * Implementation note: pushes 1 buffer to Source ring */ int ath10k_ce_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_send_context, dma_addr_t buffer, unsigned int nbytes, /* 14 bits */ unsigned int transfer_id, unsigned int flags); int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state, void *per_transfer_context, dma_addr_t buffer, unsigned int nbytes, unsigned int transfer_id, unsigned int flags); void __ath10k_ce_send_revert(struct ath10k_ce_pipe *pipe); int ath10k_ce_num_free_src_entries(struct ath10k_ce_pipe *pipe); /*==================Recv=======================*/ int __ath10k_ce_rx_num_free_bufs(struct ath10k_ce_pipe *pipe); int ath10k_ce_rx_post_buf(struct ath10k_ce_pipe *pipe, void *ctx, dma_addr_t paddr); void ath10k_ce_rx_update_write_idx(struct ath10k_ce_pipe *pipe, u32 nentries); /* recv flags */ /* Data is byte-swapped */ #define CE_RECV_FLAG_SWAPPED 1 /* * Supply data for the next completed unprocessed receive descriptor. * Pops buffer from Dest ring. */ int ath10k_ce_completed_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, unsigned int *nbytesp); /* * Supply data for the next completed unprocessed send descriptor. * Pops 1 completed send buffer from Source ring. */ int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp); int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp); /*==================CE Engine Initialization=======================*/ int ath10k_ce_init_pipe(struct ath10k *ar, unsigned int ce_id, const struct ce_attr *attr); void ath10k_ce_deinit_pipe(struct ath10k *ar, unsigned int ce_id); int ath10k_ce_alloc_pipe(struct ath10k *ar, int ce_id, const struct ce_attr *attr); void ath10k_ce_free_pipe(struct ath10k *ar, int ce_id); /*==================CE Engine Shutdown=======================*/ /* * Support clean shutdown by allowing the caller to revoke * receive buffers. Target DMA must be stopped before using * this API. */ int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, dma_addr_t *bufferp); int ath10k_ce_completed_recv_next_nolock(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, unsigned int *nbytesp); /* * Support clean shutdown by allowing the caller to cancel * pending sends. Target DMA must be stopped before using * this API. */ int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, dma_addr_t *bufferp, unsigned int *nbytesp, unsigned int *transfer_idp); /*==================CE Interrupt Handlers====================*/ void ath10k_ce_per_engine_service_any(struct ath10k *ar); void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id); void ath10k_ce_disable_interrupt(struct ath10k *ar, int ce_id); void ath10k_ce_disable_interrupts(struct ath10k *ar); void ath10k_ce_enable_interrupt(struct ath10k *ar, int ce_id); void ath10k_ce_enable_interrupts(struct ath10k *ar); void ath10k_ce_dump_registers(struct ath10k *ar, struct ath10k_fw_crash_data *crash_data); void ath10k_ce_alloc_rri(struct ath10k *ar); void ath10k_ce_free_rri(struct ath10k *ar); /* ce_attr.flags values */ /* Use NonSnooping PCIe accesses? */ #define CE_ATTR_NO_SNOOP BIT(0) /* Byte swap data words */ #define CE_ATTR_BYTE_SWAP_DATA BIT(1) /* Swizzle descriptors? */ #define CE_ATTR_SWIZZLE_DESCRIPTORS BIT(2) /* no interrupt on copy completion */ #define CE_ATTR_DIS_INTR BIT(3) /* no interrupt, only polling */ #define CE_ATTR_POLL BIT(4) /* Attributes of an instance of a Copy Engine */ struct ce_attr { /* CE_ATTR_* values */ unsigned int flags; /* #entries in source ring - Must be a power of 2 */ unsigned int src_nentries; /* * Max source send size for this CE. * This is also the minimum size of a destination buffer. */ unsigned int src_sz_max; /* #entries in destination ring - Must be a power of 2 */ unsigned int dest_nentries; void (*send_cb)(struct ath10k_ce_pipe *); void (*recv_cb)(struct ath10k_ce_pipe *); }; struct ath10k_ce_ops { struct ath10k_ce_ring *(*ce_alloc_src_ring)(struct ath10k *ar, u32 ce_id, const struct ce_attr *attr); struct ath10k_ce_ring *(*ce_alloc_dst_ring)(struct ath10k *ar, u32 ce_id, const struct ce_attr *attr); int (*ce_rx_post_buf)(struct ath10k_ce_pipe *pipe, void *ctx, dma_addr_t paddr); int (*ce_completed_recv_next_nolock)(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *nbytesp); int (*ce_revoke_recv_next)(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, dma_addr_t *nbytesp); void (*ce_extract_desc_data)(struct ath10k *ar, struct ath10k_ce_ring *src_ring, u32 sw_index, dma_addr_t *bufferp, u32 *nbytesp, u32 *transfer_idp); void (*ce_free_pipe)(struct ath10k *ar, int ce_id); int (*ce_send_nolock)(struct ath10k_ce_pipe *pipe, void *per_transfer_context, dma_addr_t buffer, u32 nbytes, u32 transfer_id, u32 flags); void (*ce_set_src_ring_base_addr_hi)(struct ath10k *ar, u32 ce_ctrl_addr, u64 addr); void (*ce_set_dest_ring_base_addr_hi)(struct ath10k *ar, u32 ce_ctrl_addr, u64 addr); int (*ce_completed_send_next_nolock)(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp); }; static inline u32 ath10k_ce_base_address(struct ath10k *ar, unsigned int ce_id) { return CE0_BASE_ADDRESS + (CE1_BASE_ADDRESS - CE0_BASE_ADDRESS) * ce_id; } #define COPY_ENGINE_ID(COPY_ENGINE_BASE_ADDRESS) (((COPY_ENGINE_BASE_ADDRESS) \ - CE0_BASE_ADDRESS) / (CE1_BASE_ADDRESS - CE0_BASE_ADDRESS)) #define CE_SRC_RING_TO_DESC(baddr, idx) \ (&(((struct ce_desc *)baddr)[idx])) #define CE_DEST_RING_TO_DESC(baddr, idx) \ (&(((struct ce_desc *)baddr)[idx])) #define CE_SRC_RING_TO_DESC_64(baddr, idx) \ (&(((struct ce_desc_64 *)baddr)[idx])) #define CE_DEST_RING_TO_DESC_64(baddr, idx) \ (&(((struct ce_desc_64 *)baddr)[idx])) /* Ring arithmetic (modulus number of entries in ring, which is a pwr of 2). */ #define CE_RING_DELTA(nentries_mask, fromidx, toidx) \ (((int)(toidx) - (int)(fromidx)) & (nentries_mask)) #define CE_RING_IDX_INCR(nentries_mask, idx) (((idx) + 1) & (nentries_mask)) #define CE_RING_IDX_ADD(nentries_mask, idx, num) \ (((idx) + (num)) & (nentries_mask)) #define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_LSB \ ar->regs->ce_wrap_intr_sum_host_msi_lsb #define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_MASK \ ar->regs->ce_wrap_intr_sum_host_msi_mask #define CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_GET(x) \ (((x) & CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_MASK) >> \ CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_LSB) #define CE_WRAPPER_INTERRUPT_SUMMARY_ADDRESS 0x0000 static inline u32 ath10k_ce_interrupt_summary(struct ath10k *ar) { struct ath10k_ce *ce = ath10k_ce_priv(ar); return CE_WRAPPER_INTERRUPT_SUMMARY_HOST_MSI_GET( ce->bus_ops->read32((ar), CE_WRAPPER_BASE_ADDRESS + CE_WRAPPER_INTERRUPT_SUMMARY_ADDRESS)); } /* Host software's Copy Engine configuration. */ #define CE_ATTR_FLAGS 0 /* * Configuration information for a Copy Engine pipe. * Passed from Host to Target during startup (one per CE). * * NOTE: Structure is shared between Host software and Target firmware! */ struct ce_pipe_config { __le32 pipenum; __le32 pipedir; __le32 nentries; __le32 nbytes_max; __le32 flags; __le32 reserved; }; /* * Directions for interconnect pipe configuration. * These definitions may be used during configuration and are shared * between Host and Target. * * Pipe Directions are relative to the Host, so PIPEDIR_IN means * "coming IN over air through Target to Host" as with a WiFi Rx operation. * Conversely, PIPEDIR_OUT means "going OUT from Host through Target over air" * as with a WiFi Tx operation. This is somewhat awkward for the "middle-man" * Target since things that are "PIPEDIR_OUT" are coming IN to the Target * over the interconnect. */ #define PIPEDIR_NONE 0 #define PIPEDIR_IN 1 /* Target-->Host, WiFi Rx direction */ #define PIPEDIR_OUT 2 /* Host->Target, WiFi Tx direction */ #define PIPEDIR_INOUT 3 /* bidirectional */ /* Establish a mapping between a service/direction and a pipe. */ struct ce_service_to_pipe { __le32 service_id; __le32 pipedir; __le32 pipenum; }; #endif /* _CE_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1