Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Kalle Valo | 812 | 86.94% | 3 | 21.43% |
Erik Stromdahl | 51 | 5.46% | 1 | 7.14% |
Wen Gong | 11 | 1.18% | 1 | 7.14% |
Sathishkumar Muruganandam | 9 | 0.96% | 1 | 7.14% |
Bartosz Markowski | 8 | 0.86% | 1 | 7.14% |
Vasanthakumar Thiagarajan | 8 | 0.86% | 1 | 7.14% |
Dmitry Eremin-Solenikov | 8 | 0.86% | 1 | 7.14% |
Michal Kazior | 8 | 0.86% | 1 | 7.14% |
Sven Eckelmann | 8 | 0.86% | 1 | 7.14% |
Raja Mani | 8 | 0.86% | 1 | 7.14% |
Marcin Rokicki | 2 | 0.21% | 1 | 7.14% |
Joe Perches | 1 | 0.11% | 1 | 7.14% |
Total | 934 | 14 |
/* SPDX-License-Identifier: ISC */ /* * Copyright (c) 2005-2011 Atheros Communications Inc. * Copyright (c) 2011-2016 Qualcomm Atheros, Inc. */ #ifndef __TARGADDRS_H__ #define __TARGADDRS_H__ #include "hw.h" /* * xxx_HOST_INTEREST_ADDRESS is the address in Target RAM of the * host_interest structure. It must match the address of the _host_interest * symbol (see linker script). * * Host Interest is shared between Host and Target in order to coordinate * between the two, and is intended to remain constant (with additions only * at the end) across software releases. * * All addresses are available here so that it's possible to * write a single binary that works with all Target Types. * May be used in assembler code as well as C. */ #define QCA988X_HOST_INTEREST_ADDRESS 0x00400800 #define HOST_INTEREST_MAX_SIZE 0x200 /* * These are items that the Host may need to access via BMI or via the * Diagnostic Window. The position of items in this structure must remain * constant across firmware revisions! Types for each item must be fixed * size across target and host platforms. More items may be added at the end. */ struct host_interest { /* * Pointer to application-defined area, if any. * Set by Target application during startup. */ u32 hi_app_host_interest; /* 0x00 */ /* Pointer to register dump area, valid after Target crash. */ u32 hi_failure_state; /* 0x04 */ /* Pointer to debug logging header */ u32 hi_dbglog_hdr; /* 0x08 */ u32 hi_unused0c; /* 0x0c */ /* * General-purpose flag bits, similar to SOC_OPTION_* flags. * Can be used by application rather than by OS. */ u32 hi_option_flag; /* 0x10 */ /* * Boolean that determines whether or not to * display messages on the serial port. */ u32 hi_serial_enable; /* 0x14 */ /* Start address of DataSet index, if any */ u32 hi_dset_list_head; /* 0x18 */ /* Override Target application start address */ u32 hi_app_start; /* 0x1c */ /* Clock and voltage tuning */ u32 hi_skip_clock_init; /* 0x20 */ u32 hi_core_clock_setting; /* 0x24 */ u32 hi_cpu_clock_setting; /* 0x28 */ u32 hi_system_sleep_setting; /* 0x2c */ u32 hi_xtal_control_setting; /* 0x30 */ u32 hi_pll_ctrl_setting_24ghz; /* 0x34 */ u32 hi_pll_ctrl_setting_5ghz; /* 0x38 */ u32 hi_ref_voltage_trim_setting; /* 0x3c */ u32 hi_clock_info; /* 0x40 */ /* Host uses BE CPU or not */ u32 hi_be; /* 0x44 */ u32 hi_stack; /* normal stack */ /* 0x48 */ u32 hi_err_stack; /* error stack */ /* 0x4c */ u32 hi_desired_cpu_speed_hz; /* 0x50 */ /* Pointer to Board Data */ u32 hi_board_data; /* 0x54 */ /* * Indication of Board Data state: * 0: board data is not yet initialized. * 1: board data is initialized; unknown size * >1: number of bytes of initialized board data */ u32 hi_board_data_initialized; /* 0x58 */ u32 hi_dset_ram_index_table; /* 0x5c */ u32 hi_desired_baud_rate; /* 0x60 */ u32 hi_dbglog_config; /* 0x64 */ u32 hi_end_ram_reserve_sz; /* 0x68 */ u32 hi_mbox_io_block_sz; /* 0x6c */ u32 hi_num_bpatch_streams; /* 0x70 -- unused */ u32 hi_mbox_isr_yield_limit; /* 0x74 */ u32 hi_refclk_hz; /* 0x78 */ u32 hi_ext_clk_detected; /* 0x7c */ u32 hi_dbg_uart_txpin; /* 0x80 */ u32 hi_dbg_uart_rxpin; /* 0x84 */ u32 hi_hci_uart_baud; /* 0x88 */ u32 hi_hci_uart_pin_assignments; /* 0x8C */ u32 hi_hci_uart_baud_scale_val; /* 0x90 */ u32 hi_hci_uart_baud_step_val; /* 0x94 */ u32 hi_allocram_start; /* 0x98 */ u32 hi_allocram_sz; /* 0x9c */ u32 hi_hci_bridge_flags; /* 0xa0 */ u32 hi_hci_uart_support_pins; /* 0xa4 */ u32 hi_hci_uart_pwr_mgmt_params; /* 0xa8 */ /* * 0xa8 - [1]: 0 = UART FC active low, 1 = UART FC active high * [31:16]: wakeup timeout in ms */ /* Pointer to extended board Data */ u32 hi_board_ext_data; /* 0xac */ u32 hi_board_ext_data_config; /* 0xb0 */ /* * Bit [0] : valid * Bit[31:16: size */ /* * hi_reset_flag is used to do some stuff when target reset. * such as restore app_start after warm reset or * preserve host Interest area, or preserve ROM data, literals etc. */ u32 hi_reset_flag; /* 0xb4 */ /* indicate hi_reset_flag is valid */ u32 hi_reset_flag_valid; /* 0xb8 */ u32 hi_hci_uart_pwr_mgmt_params_ext; /* 0xbc */ /* 0xbc - [31:0]: idle timeout in ms */ /* ACS flags */ u32 hi_acs_flags; /* 0xc0 */ u32 hi_console_flags; /* 0xc4 */ u32 hi_nvram_state; /* 0xc8 */ u32 hi_option_flag2; /* 0xcc */ /* If non-zero, override values sent to Host in WMI_READY event. */ u32 hi_sw_version_override; /* 0xd0 */ u32 hi_abi_version_override; /* 0xd4 */ /* * Percentage of high priority RX traffic to total expected RX traffic * applicable only to ar6004 */ u32 hi_hp_rx_traffic_ratio; /* 0xd8 */ /* test applications flags */ u32 hi_test_apps_related; /* 0xdc */ /* location of test script */ u32 hi_ota_testscript; /* 0xe0 */ /* location of CAL data */ u32 hi_cal_data; /* 0xe4 */ /* Number of packet log buffers */ u32 hi_pktlog_num_buffers; /* 0xe8 */ /* wow extension configuration */ u32 hi_wow_ext_config; /* 0xec */ u32 hi_pwr_save_flags; /* 0xf0 */ /* Spatial Multiplexing Power Save (SMPS) options */ u32 hi_smps_options; /* 0xf4 */ /* Interconnect-specific state */ u32 hi_interconnect_state; /* 0xf8 */ /* Coex configuration flags */ u32 hi_coex_config; /* 0xfc */ /* Early allocation support */ u32 hi_early_alloc; /* 0x100 */ /* FW swap field */ /* * Bits of this 32bit word will be used to pass specific swap * instruction to FW */ /* * Bit 0 -- AP Nart descriptor no swap. When this bit is set * FW will not swap TX descriptor. Meaning packets are formed * on the target processor. */ /* Bit 1 - unused */ u32 hi_fw_swap; /* 0x104 */ /* global arenas pointer address, used by host driver debug */ u32 hi_dynamic_mem_arenas_addr; /* 0x108 */ /* allocated bytes of DRAM use by allocated */ u32 hi_dynamic_mem_allocated; /* 0x10C */ /* remaining bytes of DRAM */ u32 hi_dynamic_mem_remaining; /* 0x110 */ /* memory track count, configured by host */ u32 hi_dynamic_mem_track_max; /* 0x114 */ /* minidump buffer */ u32 hi_minidump; /* 0x118 */ /* bdata's sig and key addr */ u32 hi_bd_sig_key; /* 0x11c */ } __packed; #define HI_ITEM(item) offsetof(struct host_interest, item) /* Bits defined in hi_option_flag */ /* Enable timer workaround */ #define HI_OPTION_TIMER_WAR 0x01 /* Limit BMI command credits */ #define HI_OPTION_BMI_CRED_LIMIT 0x02 /* Relay Dot11 hdr to/from host */ #define HI_OPTION_RELAY_DOT11_HDR 0x04 /* MAC addr method 0-locally administred 1-globally unique addrs */ #define HI_OPTION_MAC_ADDR_METHOD 0x08 /* Firmware Bridging */ #define HI_OPTION_FW_BRIDGE 0x10 /* Enable CPU profiling */ #define HI_OPTION_ENABLE_PROFILE 0x20 /* Disable debug logging */ #define HI_OPTION_DISABLE_DBGLOG 0x40 /* Skip Era Tracking */ #define HI_OPTION_SKIP_ERA_TRACKING 0x80 /* Disable PAPRD (debug) */ #define HI_OPTION_PAPRD_DISABLE 0x100 #define HI_OPTION_NUM_DEV_LSB 0x200 #define HI_OPTION_NUM_DEV_MSB 0x800 #define HI_OPTION_DEV_MODE_LSB 0x1000 #define HI_OPTION_DEV_MODE_MSB 0x8000000 /* Disable LowFreq Timer Stabilization */ #define HI_OPTION_NO_LFT_STBL 0x10000000 /* Skip regulatory scan */ #define HI_OPTION_SKIP_REG_SCAN 0x20000000 /* * Do regulatory scan during init before * sending WMI ready event to host */ #define HI_OPTION_INIT_REG_SCAN 0x40000000 /* REV6: Do not adjust memory map */ #define HI_OPTION_SKIP_MEMMAP 0x80000000 #define HI_OPTION_MAC_ADDR_METHOD_SHIFT 3 /* 2 bits of hi_option_flag are used to represent 3 modes */ #define HI_OPTION_FW_MODE_IBSS 0x0 /* IBSS Mode */ #define HI_OPTION_FW_MODE_BSS_STA 0x1 /* STA Mode */ #define HI_OPTION_FW_MODE_AP 0x2 /* AP Mode */ #define HI_OPTION_FW_MODE_BT30AMP 0x3 /* BT30 AMP Mode */ /* 2 bits of hi_option flag are usedto represent 4 submodes */ #define HI_OPTION_FW_SUBMODE_NONE 0x0 /* Normal mode */ #define HI_OPTION_FW_SUBMODE_P2PDEV 0x1 /* p2p device mode */ #define HI_OPTION_FW_SUBMODE_P2PCLIENT 0x2 /* p2p client mode */ #define HI_OPTION_FW_SUBMODE_P2PGO 0x3 /* p2p go mode */ /* Num dev Mask */ #define HI_OPTION_NUM_DEV_MASK 0x7 #define HI_OPTION_NUM_DEV_SHIFT 0x9 /* firmware bridging */ #define HI_OPTION_FW_BRIDGE_SHIFT 0x04 /* * Fw Mode/SubMode Mask *----------------------------------------------------------------------------- * SUB | SUB | SUB | SUB | | | | *MODE[3] | MODE[2] | MODE[1] | MODE[0] | MODE[3] | MODE[2] | MODE[1] | MODE[0] * (2) | (2) | (2) | (2) | (2) | (2) | (2) | (2) *----------------------------------------------------------------------------- */ #define HI_OPTION_FW_MODE_BITS 0x2 #define HI_OPTION_FW_MODE_MASK 0x3 #define HI_OPTION_FW_MODE_SHIFT 0xC #define HI_OPTION_ALL_FW_MODE_MASK 0xFF #define HI_OPTION_FW_SUBMODE_BITS 0x2 #define HI_OPTION_FW_SUBMODE_MASK 0x3 #define HI_OPTION_FW_SUBMODE_SHIFT 0x14 #define HI_OPTION_ALL_FW_SUBMODE_MASK 0xFF00 #define HI_OPTION_ALL_FW_SUBMODE_SHIFT 0x8 /* hi_option_flag2 options */ #define HI_OPTION_OFFLOAD_AMSDU 0x01 #define HI_OPTION_DFS_SUPPORT 0x02 /* Enable DFS support */ #define HI_OPTION_ENABLE_RFKILL 0x04 /* RFKill Enable Feature*/ #define HI_OPTION_RADIO_RETENTION_DISABLE 0x08 /* Disable radio retention */ #define HI_OPTION_EARLY_CFG_DONE 0x10 /* Early configuration is complete */ #define HI_OPTION_RF_KILL_SHIFT 0x2 #define HI_OPTION_RF_KILL_MASK 0x1 /* hi_reset_flag */ /* preserve App Start address */ #define HI_RESET_FLAG_PRESERVE_APP_START 0x01 /* preserve host interest */ #define HI_RESET_FLAG_PRESERVE_HOST_INTEREST 0x02 /* preserve ROM data */ #define HI_RESET_FLAG_PRESERVE_ROMDATA 0x04 #define HI_RESET_FLAG_PRESERVE_NVRAM_STATE 0x08 #define HI_RESET_FLAG_PRESERVE_BOOT_INFO 0x10 #define HI_RESET_FLAG_WARM_RESET 0x20 /* define hi_fw_swap bits */ #define HI_DESC_IN_FW_BIT 0x01 /* indicate the reset flag is valid */ #define HI_RESET_FLAG_IS_VALID 0x12345678 /* ACS is enabled */ #define HI_ACS_FLAGS_ENABLED (1 << 0) /* Use physical WWAN device */ #define HI_ACS_FLAGS_USE_WWAN (1 << 1) /* Use test VAP */ #define HI_ACS_FLAGS_TEST_VAP (1 << 2) /* SDIO/mailbox ACS flag definitions */ #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET (1 << 0) #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET (1 << 1) #define HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE (1 << 2) #define HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_FW_ACK (1 << 16) #define HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK (1 << 17) /* * If both SDIO_CRASH_DUMP_ENHANCEMENT_HOST and SDIO_CRASH_DUMP_ENHANCEMENT_FW * flags are set, then crashdump upload will be done using the BMI host/target * communication channel. */ /* HOST to support using BMI dump FW memory when hit assert */ #define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_HOST 0x400 /* FW to support using BMI dump FW memory when hit assert */ #define HI_OPTION_SDIO_CRASH_DUMP_ENHANCEMENT_FW 0x800 /* * CONSOLE FLAGS * * Bit Range Meaning * --------- -------------------------------- * 2..0 UART ID (0 = Default) * 3 Baud Select (0 = 9600, 1 = 115200) * 30..4 Reserved * 31 Enable Console * */ #define HI_CONSOLE_FLAGS_ENABLE (1 << 31) #define HI_CONSOLE_FLAGS_UART_MASK (0x7) #define HI_CONSOLE_FLAGS_UART_SHIFT 0 #define HI_CONSOLE_FLAGS_BAUD_SELECT (1 << 3) /* SM power save options */ #define HI_SMPS_ALLOW_MASK (0x00000001) #define HI_SMPS_MODE_MASK (0x00000002) #define HI_SMPS_MODE_STATIC (0x00000000) #define HI_SMPS_MODE_DYNAMIC (0x00000002) #define HI_SMPS_DISABLE_AUTO_MODE (0x00000004) #define HI_SMPS_DATA_THRESH_MASK (0x000007f8) #define HI_SMPS_DATA_THRESH_SHIFT (3) #define HI_SMPS_RSSI_THRESH_MASK (0x0007f800) #define HI_SMPS_RSSI_THRESH_SHIFT (11) #define HI_SMPS_LOWPWR_CM_MASK (0x00380000) #define HI_SMPS_LOWPWR_CM_SHIFT (15) #define HI_SMPS_HIPWR_CM_MASK (0x03c00000) #define HI_SMPS_HIPWR_CM_SHIFT (19) /* * WOW Extension configuration * * Bit Range Meaning * --------- -------------------------------- * 8..0 Size of each WOW pattern (max 511) * 15..9 Number of patterns per list (max 127) * 17..16 Number of lists (max 4) * 30..18 Reserved * 31 Enabled * * set values (except enable) to zeros for default settings */ #define HI_WOW_EXT_ENABLED_MASK (1 << 31) #define HI_WOW_EXT_NUM_LIST_SHIFT 16 #define HI_WOW_EXT_NUM_LIST_MASK (0x3 << HI_WOW_EXT_NUM_LIST_SHIFT) #define HI_WOW_EXT_NUM_PATTERNS_SHIFT 9 #define HI_WOW_EXT_NUM_PATTERNS_MASK (0x7F << HI_WOW_EXT_NUM_PATTERNS_SHIFT) #define HI_WOW_EXT_PATTERN_SIZE_SHIFT 0 #define HI_WOW_EXT_PATTERN_SIZE_MASK (0x1FF << HI_WOW_EXT_PATTERN_SIZE_SHIFT) #define HI_WOW_EXT_MAKE_CONFIG(num_lists, count, size) \ ((((num_lists) << HI_WOW_EXT_NUM_LIST_SHIFT) & \ HI_WOW_EXT_NUM_LIST_MASK) | \ (((count) << HI_WOW_EXT_NUM_PATTERNS_SHIFT) & \ HI_WOW_EXT_NUM_PATTERNS_MASK) | \ (((size) << HI_WOW_EXT_PATTERN_SIZE_SHIFT) & \ HI_WOW_EXT_PATTERN_SIZE_MASK)) #define HI_WOW_EXT_GET_NUM_LISTS(config) \ (((config) & HI_WOW_EXT_NUM_LIST_MASK) >> HI_WOW_EXT_NUM_LIST_SHIFT) #define HI_WOW_EXT_GET_NUM_PATTERNS(config) \ (((config) & HI_WOW_EXT_NUM_PATTERNS_MASK) >> \ HI_WOW_EXT_NUM_PATTERNS_SHIFT) #define HI_WOW_EXT_GET_PATTERN_SIZE(config) \ (((config) & HI_WOW_EXT_PATTERN_SIZE_MASK) >> \ HI_WOW_EXT_PATTERN_SIZE_SHIFT) /* * Early allocation configuration * Support RAM bank configuration before BMI done and this eases the memory * allocation at very early stage * Bit Range Meaning * --------- ---------------------------------- * [0:3] number of bank assigned to be IRAM * [4:15] reserved * [16:31] magic number * * Note: * 1. target firmware would check magic number and if it's a match, firmware * would consider the bits[0:15] are valid and base on that to calculate * the end of DRAM. Early allocation would be located at that area and * may be reclaimed when necessary * 2. if no magic number is found, early allocation would happen at "_end" * symbol of ROM which is located before the app-data and might NOT be * re-claimable. If this is adopted, link script should keep this in * mind to avoid data corruption. */ #define HI_EARLY_ALLOC_MAGIC 0x6d8a #define HI_EARLY_ALLOC_MAGIC_MASK 0xffff0000 #define HI_EARLY_ALLOC_MAGIC_SHIFT 16 #define HI_EARLY_ALLOC_IRAM_BANKS_MASK 0x0000000f #define HI_EARLY_ALLOC_IRAM_BANKS_SHIFT 0 #define HI_EARLY_ALLOC_VALID() \ ((((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_MAGIC_MASK) >> \ HI_EARLY_ALLOC_MAGIC_SHIFT) == (HI_EARLY_ALLOC_MAGIC)) #define HI_EARLY_ALLOC_GET_IRAM_BANKS() \ (((HOST_INTEREST->hi_early_alloc) & HI_EARLY_ALLOC_IRAM_BANKS_MASK) \ >> HI_EARLY_ALLOC_IRAM_BANKS_SHIFT) /*power save flag bit definitions*/ #define HI_PWR_SAVE_LPL_ENABLED 0x1 /*b1-b3 reserved*/ /*b4-b5 : dev0 LPL type : 0 - none * 1- Reduce Pwr Search * 2- Reduce Pwr Listen */ /*b6-b7 : dev1 LPL type and so on for Max 8 devices*/ #define HI_PWR_SAVE_LPL_DEV0_LSB 4 #define HI_PWR_SAVE_LPL_DEV_MASK 0x3 /*power save related utility macros*/ #define HI_LPL_ENABLED() \ ((HOST_INTEREST->hi_pwr_save_flags & HI_PWR_SAVE_LPL_ENABLED)) #define HI_DEV_LPL_TYPE_GET(_devix) \ (HOST_INTEREST->hi_pwr_save_flags & ((HI_PWR_SAVE_LPL_DEV_MASK) << \ (HI_PWR_SAVE_LPL_DEV0_LSB + (_devix) * 2))) #define HOST_INTEREST_SMPS_IS_ALLOWED() \ ((HOST_INTEREST->hi_smps_options & HI_SMPS_ALLOW_MASK)) /* Reserve 1024 bytes for extended board data */ #define QCA988X_BOARD_DATA_SZ 7168 #define QCA988X_BOARD_EXT_DATA_SZ 0 #define QCA9887_BOARD_DATA_SZ 7168 #define QCA9887_BOARD_EXT_DATA_SZ 0 #define QCA6174_BOARD_DATA_SZ 8192 #define QCA6174_BOARD_EXT_DATA_SZ 0 #define QCA9377_BOARD_DATA_SZ QCA6174_BOARD_DATA_SZ #define QCA9377_BOARD_EXT_DATA_SZ 0 #define QCA99X0_BOARD_DATA_SZ 12288 #define QCA99X0_BOARD_EXT_DATA_SZ 0 /* Dual band extended board data */ #define QCA99X0_EXT_BOARD_DATA_SZ 2048 #define EXT_BOARD_ADDRESS_OFFSET 0x3000 #define QCA4019_BOARD_DATA_SZ 12064 #define QCA4019_BOARD_EXT_DATA_SZ 0 #define WCN3990_BOARD_DATA_SZ 26328 #define WCN3990_BOARD_EXT_DATA_SZ 0 #endif /* __TARGADDRS_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1