Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jiancheng Xue | 827 | 97.87% | 1 | 12.50% |
Axel Lin | 10 | 1.18% | 2 | 25.00% |
Thierry Reding | 3 | 0.36% | 1 | 12.50% |
Kishon Vijay Abraham I | 2 | 0.24% | 1 | 12.50% |
Gregory CLEMENT | 1 | 0.12% | 1 | 12.50% |
Thomas Gleixner | 1 | 0.12% | 1 | 12.50% |
Hao Fang | 1 | 0.12% | 1 | 12.50% |
Total | 845 | 8 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright (c) 2014 Linaro Ltd. * Copyright (c) 2014 HiSilicon Limited. */ #include <linux/delay.h> #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/regmap.h> #define SATA_PHY0_CTLL 0xa0 #define MPLL_MULTIPLIER_SHIFT 1 #define MPLL_MULTIPLIER_MASK 0xfe #define MPLL_MULTIPLIER_50M 0x3c #define MPLL_MULTIPLIER_100M 0x1e #define PHY_RESET BIT(0) #define REF_SSP_EN BIT(9) #define SSC_EN BIT(10) #define REF_USE_PAD BIT(23) #define SATA_PORT_PHYCTL 0x174 #define SPEED_MODE_MASK 0x6f0000 #define HALF_RATE_SHIFT 16 #define PHY_CONFIG_SHIFT 18 #define GEN2_EN_SHIFT 21 #define SPEED_CTRL BIT(20) #define SATA_PORT_PHYCTL1 0x148 #define AMPLITUDE_MASK 0x3ffffe #define AMPLITUDE_GEN3 0x68 #define AMPLITUDE_GEN3_SHIFT 15 #define AMPLITUDE_GEN2 0x56 #define AMPLITUDE_GEN2_SHIFT 8 #define AMPLITUDE_GEN1 0x56 #define AMPLITUDE_GEN1_SHIFT 1 #define SATA_PORT_PHYCTL2 0x14c #define PREEMPH_MASK 0x3ffff #define PREEMPH_GEN3 0x20 #define PREEMPH_GEN3_SHIFT 12 #define PREEMPH_GEN2 0x15 #define PREEMPH_GEN2_SHIFT 6 #define PREEMPH_GEN1 0x5 #define PREEMPH_GEN1_SHIFT 0 struct hix5hd2_priv { void __iomem *base; struct regmap *peri_ctrl; }; enum phy_speed_mode { SPEED_MODE_GEN1 = 0, SPEED_MODE_GEN2 = 1, SPEED_MODE_GEN3 = 2, }; static int hix5hd2_sata_phy_init(struct phy *phy) { struct hix5hd2_priv *priv = phy_get_drvdata(phy); u32 val, data[2]; int ret; if (priv->peri_ctrl) { ret = of_property_read_u32_array(phy->dev.of_node, "hisilicon,power-reg", &data[0], 2); if (ret) { dev_err(&phy->dev, "Fail read hisilicon,power-reg\n"); return ret; } regmap_update_bits(priv->peri_ctrl, data[0], BIT(data[1]), BIT(data[1])); } /* reset phy */ val = readl_relaxed(priv->base + SATA_PHY0_CTLL); val &= ~(MPLL_MULTIPLIER_MASK | REF_USE_PAD); val |= MPLL_MULTIPLIER_50M << MPLL_MULTIPLIER_SHIFT | REF_SSP_EN | PHY_RESET; writel_relaxed(val, priv->base + SATA_PHY0_CTLL); msleep(20); val &= ~PHY_RESET; writel_relaxed(val, priv->base + SATA_PHY0_CTLL); val = readl_relaxed(priv->base + SATA_PORT_PHYCTL1); val &= ~AMPLITUDE_MASK; val |= AMPLITUDE_GEN3 << AMPLITUDE_GEN3_SHIFT | AMPLITUDE_GEN2 << AMPLITUDE_GEN2_SHIFT | AMPLITUDE_GEN1 << AMPLITUDE_GEN1_SHIFT; writel_relaxed(val, priv->base + SATA_PORT_PHYCTL1); val = readl_relaxed(priv->base + SATA_PORT_PHYCTL2); val &= ~PREEMPH_MASK; val |= PREEMPH_GEN3 << PREEMPH_GEN3_SHIFT | PREEMPH_GEN2 << PREEMPH_GEN2_SHIFT | PREEMPH_GEN1 << PREEMPH_GEN1_SHIFT; writel_relaxed(val, priv->base + SATA_PORT_PHYCTL2); /* ensure PHYCTRL setting takes effect */ val = readl_relaxed(priv->base + SATA_PORT_PHYCTL); val &= ~SPEED_MODE_MASK; val |= SPEED_MODE_GEN1 << HALF_RATE_SHIFT | SPEED_MODE_GEN1 << PHY_CONFIG_SHIFT | SPEED_MODE_GEN1 << GEN2_EN_SHIFT | SPEED_CTRL; writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); msleep(20); val &= ~SPEED_MODE_MASK; val |= SPEED_MODE_GEN3 << HALF_RATE_SHIFT | SPEED_MODE_GEN3 << PHY_CONFIG_SHIFT | SPEED_MODE_GEN3 << GEN2_EN_SHIFT | SPEED_CTRL; writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); val &= ~(SPEED_MODE_MASK | SPEED_CTRL); val |= SPEED_MODE_GEN2 << HALF_RATE_SHIFT | SPEED_MODE_GEN2 << PHY_CONFIG_SHIFT | SPEED_MODE_GEN2 << GEN2_EN_SHIFT; writel_relaxed(val, priv->base + SATA_PORT_PHYCTL); return 0; } static const struct phy_ops hix5hd2_sata_phy_ops = { .init = hix5hd2_sata_phy_init, .owner = THIS_MODULE, }; static int hix5hd2_sata_phy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct device *dev = &pdev->dev; struct resource *res; struct phy *phy; struct hix5hd2_priv *priv; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) return -EINVAL; priv->base = devm_ioremap(dev, res->start, resource_size(res)); if (!priv->base) return -ENOMEM; priv->peri_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node, "hisilicon,peripheral-syscon"); if (IS_ERR(priv->peri_ctrl)) priv->peri_ctrl = NULL; phy = devm_phy_create(dev, NULL, &hix5hd2_sata_phy_ops); if (IS_ERR(phy)) { dev_err(dev, "failed to create PHY\n"); return PTR_ERR(phy); } phy_set_drvdata(phy, priv); phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); return PTR_ERR_OR_ZERO(phy_provider); } static const struct of_device_id hix5hd2_sata_phy_of_match[] = { {.compatible = "hisilicon,hix5hd2-sata-phy",}, { }, }; MODULE_DEVICE_TABLE(of, hix5hd2_sata_phy_of_match); static struct platform_driver hix5hd2_sata_phy_driver = { .probe = hix5hd2_sata_phy_probe, .driver = { .name = "hix5hd2-sata-phy", .of_match_table = hix5hd2_sata_phy_of_match, } }; module_platform_driver(hix5hd2_sata_phy_driver); MODULE_AUTHOR("Jiancheng Xue <xuejiancheng@huawei.com>"); MODULE_DESCRIPTION("HISILICON HIX5HD2 SATA PHY driver"); MODULE_ALIAS("platform:hix5hd2-sata-phy"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1