Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Biwen Li | 1115 | 92.84% | 2 | 15.38% |
Peng Ma | 43 | 3.58% | 2 | 15.38% |
Ran Wang | 17 | 1.42% | 1 | 7.69% |
Alexandre Belloni | 13 | 1.08% | 3 | 23.08% |
Michael Walle | 7 | 0.58% | 1 | 7.69% |
SF Markus Elfring | 2 | 0.17% | 1 | 7.69% |
Zhang Jianhua | 2 | 0.17% | 1 | 7.69% |
Rob Herring | 1 | 0.08% | 1 | 7.69% |
Bartosz Golaszewski | 1 | 0.08% | 1 | 7.69% |
Total | 1201 | 13 |
// SPDX-License-Identifier: GPL-2.0+ /* * Freescale FlexTimer Module (FTM) alarm device driver. * * Copyright 2014 Freescale Semiconductor, Inc. * Copyright 2019-2020 NXP * */ #include <linux/device.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/fsl/ftm.h> #include <linux/rtc.h> #include <linux/time.h> #include <linux/acpi.h> #include <linux/pm_wakeirq.h> #define FTM_SC_CLK(c) ((c) << FTM_SC_CLK_MASK_SHIFT) /* * Select Fixed frequency clock (32KHz) as clock source * of FlexTimer Module */ #define FTM_SC_CLKS_FIXED_FREQ 0x02 #define FIXED_FREQ_CLK 32000 /* Select 128 (2^7) as divider factor */ #define MAX_FREQ_DIV (1 << FTM_SC_PS_MASK) /* Maximum counter value in FlexTimer's CNT registers */ #define MAX_COUNT_VAL 0xffff struct ftm_rtc { struct rtc_device *rtc_dev; void __iomem *base; bool big_endian; u32 alarm_freq; }; static inline u32 rtc_readl(struct ftm_rtc *dev, u32 reg) { if (dev->big_endian) return ioread32be(dev->base + reg); else return ioread32(dev->base + reg); } static inline void rtc_writel(struct ftm_rtc *dev, u32 reg, u32 val) { if (dev->big_endian) iowrite32be(val, dev->base + reg); else iowrite32(val, dev->base + reg); } static inline void ftm_counter_enable(struct ftm_rtc *rtc) { u32 val; /* select and enable counter clock source */ val = rtc_readl(rtc, FTM_SC); val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK); val |= (FTM_SC_PS_MASK | FTM_SC_CLK(FTM_SC_CLKS_FIXED_FREQ)); rtc_writel(rtc, FTM_SC, val); } static inline void ftm_counter_disable(struct ftm_rtc *rtc) { u32 val; /* disable counter clock source */ val = rtc_readl(rtc, FTM_SC); val &= ~(FTM_SC_PS_MASK | FTM_SC_CLK_MASK); rtc_writel(rtc, FTM_SC, val); } static inline void ftm_irq_acknowledge(struct ftm_rtc *rtc) { unsigned int timeout = 100; /* *Fix errata A-007728 for flextimer * If the FTM counter reaches the FTM_MOD value between * the reading of the TOF bit and the writing of 0 to * the TOF bit, the process of clearing the TOF bit * does not work as expected when FTMx_CONF[NUMTOF] != 0 * and the current TOF count is less than FTMx_CONF[NUMTOF]. * If the above condition is met, the TOF bit remains set. * If the TOF interrupt is enabled (FTMx_SC[TOIE] = 1),the * TOF interrupt also remains asserted. * * Above is the errata discription * * In one word: software clearing TOF bit not works when * FTMx_CONF[NUMTOF] was seted as nonzero and FTM counter * reaches the FTM_MOD value. * * The workaround is clearing TOF bit until it works * (FTM counter doesn't always reache the FTM_MOD anyway), * which may cost some cycles. */ while ((FTM_SC_TOF & rtc_readl(rtc, FTM_SC)) && timeout--) rtc_writel(rtc, FTM_SC, rtc_readl(rtc, FTM_SC) & (~FTM_SC_TOF)); } static inline void ftm_irq_enable(struct ftm_rtc *rtc) { u32 val; val = rtc_readl(rtc, FTM_SC); val |= FTM_SC_TOIE; rtc_writel(rtc, FTM_SC, val); } static inline void ftm_irq_disable(struct ftm_rtc *rtc) { u32 val; val = rtc_readl(rtc, FTM_SC); val &= ~FTM_SC_TOIE; rtc_writel(rtc, FTM_SC, val); } static inline void ftm_reset_counter(struct ftm_rtc *rtc) { /* * The CNT register contains the FTM counter value. * Reset clears the CNT register. Writing any value to COUNT * updates the counter with its initial value, CNTIN. */ rtc_writel(rtc, FTM_CNT, 0x00); } static void ftm_clean_alarm(struct ftm_rtc *rtc) { ftm_counter_disable(rtc); rtc_writel(rtc, FTM_CNTIN, 0x00); rtc_writel(rtc, FTM_MOD, ~0U); ftm_reset_counter(rtc); } static irqreturn_t ftm_rtc_alarm_interrupt(int irq, void *dev) { struct ftm_rtc *rtc = dev; rtc_update_irq(rtc->rtc_dev, 1, RTC_IRQF | RTC_AF); ftm_irq_acknowledge(rtc); ftm_irq_disable(rtc); ftm_clean_alarm(rtc); return IRQ_HANDLED; } static int ftm_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { struct ftm_rtc *rtc = dev_get_drvdata(dev); if (enabled) ftm_irq_enable(rtc); else ftm_irq_disable(rtc); return 0; } /* * Note: * The function is not really getting time from the RTC * since FlexTimer is not a RTC device, but we need to * get time to setup alarm, so we are using system time * for now. */ static int ftm_rtc_read_time(struct device *dev, struct rtc_time *tm) { rtc_time64_to_tm(ktime_get_real_seconds(), tm); return 0; } static int ftm_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) { return 0; } /* * 1. Select fixed frequency clock (32KHz) as clock source; * 2. Select 128 (2^7) as divider factor; * So clock is 250 Hz (32KHz/128). * * 3. FlexTimer's CNT register is a 32bit register, * but the register's 16 bit as counter value,it's other 16 bit * is reserved.So minimum counter value is 0x0,maximum counter * value is 0xffff. * So max alarm value is 262 (65536 / 250) seconds */ static int ftm_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) { time64_t alm_time; unsigned long long cycle; struct ftm_rtc *rtc = dev_get_drvdata(dev); alm_time = rtc_tm_to_time64(&alm->time); ftm_clean_alarm(rtc); cycle = (alm_time - ktime_get_real_seconds()) * rtc->alarm_freq; if (cycle > MAX_COUNT_VAL) { pr_err("Out of alarm range {0~262} seconds.\n"); return -ERANGE; } ftm_irq_disable(rtc); /* * The counter increments until the value of MOD is reached, * at which point the counter is reloaded with the value of CNTIN. * The TOF (the overflow flag) bit is set when the FTM counter * changes from MOD to CNTIN. So we should using the cycle - 1. */ rtc_writel(rtc, FTM_MOD, cycle - 1); ftm_counter_enable(rtc); ftm_irq_enable(rtc); return 0; } static const struct rtc_class_ops ftm_rtc_ops = { .read_time = ftm_rtc_read_time, .read_alarm = ftm_rtc_read_alarm, .set_alarm = ftm_rtc_set_alarm, .alarm_irq_enable = ftm_rtc_alarm_irq_enable, }; static int ftm_rtc_probe(struct platform_device *pdev) { int irq; int ret; struct ftm_rtc *rtc; rtc = devm_kzalloc(&pdev->dev, sizeof(*rtc), GFP_KERNEL); if (unlikely(!rtc)) { dev_err(&pdev->dev, "cannot alloc memory for rtc\n"); return -ENOMEM; } platform_set_drvdata(pdev, rtc); rtc->rtc_dev = devm_rtc_allocate_device(&pdev->dev); if (IS_ERR(rtc->rtc_dev)) return PTR_ERR(rtc->rtc_dev); rtc->base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(rtc->base)) { dev_err(&pdev->dev, "cannot ioremap resource for rtc\n"); return PTR_ERR(rtc->base); } irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; ret = devm_request_irq(&pdev->dev, irq, ftm_rtc_alarm_interrupt, 0, dev_name(&pdev->dev), rtc); if (ret < 0) { dev_err(&pdev->dev, "failed to request irq\n"); return ret; } rtc->big_endian = device_property_read_bool(&pdev->dev, "big-endian"); rtc->alarm_freq = (u32)FIXED_FREQ_CLK / (u32)MAX_FREQ_DIV; rtc->rtc_dev->ops = &ftm_rtc_ops; device_init_wakeup(&pdev->dev, true); ret = dev_pm_set_wake_irq(&pdev->dev, irq); if (ret) dev_err(&pdev->dev, "failed to enable irq wake\n"); ret = devm_rtc_register_device(rtc->rtc_dev); if (ret) { dev_err(&pdev->dev, "can't register rtc device\n"); return ret; } return 0; } static const struct of_device_id ftm_rtc_match[] = { { .compatible = "fsl,ls1012a-ftm-alarm", }, { .compatible = "fsl,ls1021a-ftm-alarm", }, { .compatible = "fsl,ls1028a-ftm-alarm", }, { .compatible = "fsl,ls1043a-ftm-alarm", }, { .compatible = "fsl,ls1046a-ftm-alarm", }, { .compatible = "fsl,ls1088a-ftm-alarm", }, { .compatible = "fsl,ls208xa-ftm-alarm", }, { .compatible = "fsl,lx2160a-ftm-alarm", }, { }, }; MODULE_DEVICE_TABLE(of, ftm_rtc_match); static const struct acpi_device_id ftm_imx_acpi_ids[] = { {"NXP0014",}, { } }; MODULE_DEVICE_TABLE(acpi, ftm_imx_acpi_ids); static struct platform_driver ftm_rtc_driver = { .probe = ftm_rtc_probe, .driver = { .name = "ftm-alarm", .of_match_table = ftm_rtc_match, .acpi_match_table = ACPI_PTR(ftm_imx_acpi_ids), }, }; module_platform_driver(ftm_rtc_driver); MODULE_DESCRIPTION("NXP/Freescale FlexTimer alarm driver"); MODULE_AUTHOR("Biwen Li <biwen.li@nxp.com>"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1