Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Cyril Bur | 1059 | 71.94% | 2 | 11.76% |
Joel Stanley | 181 | 12.30% | 6 | 35.29% |
Vijay Khemka | 81 | 5.50% | 1 | 5.88% |
Andrew Jeffery | 69 | 4.69% | 1 | 5.88% |
Chia-Wei, Wang | 37 | 2.51% | 1 | 5.88% |
Yang Yingliang | 23 | 1.56% | 1 | 5.88% |
Brad Bishop | 7 | 0.48% | 1 | 5.88% |
Iwona Winiarska | 6 | 0.41% | 1 | 5.88% |
Jae Hyun Yoo | 5 | 0.34% | 1 | 5.88% |
Thomas Gleixner | 2 | 0.14% | 1 | 5.88% |
Uwe Kleine-König | 2 | 0.14% | 1 | 5.88% |
Total | 1472 | 17 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Copyright 2017 IBM Corporation */ #include <linux/clk.h> #include <linux/log2.h> #include <linux/mfd/syscon.h> #include <linux/miscdevice.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/poll.h> #include <linux/regmap.h> #include <linux/aspeed-lpc-ctrl.h> #define DEVICE_NAME "aspeed-lpc-ctrl" #define HICR5 0x80 #define HICR5_ENL2H BIT(8) #define HICR5_ENFWH BIT(10) #define HICR6 0x84 #define SW_FWH2AHB BIT(17) #define HICR7 0x88 #define HICR8 0x8c struct aspeed_lpc_ctrl { struct miscdevice miscdev; struct regmap *regmap; struct clk *clk; phys_addr_t mem_base; resource_size_t mem_size; u32 pnor_size; u32 pnor_base; bool fwh2ahb; struct regmap *scu; }; static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file) { return container_of(file->private_data, struct aspeed_lpc_ctrl, miscdev); } static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma) { struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); unsigned long vsize = vma->vm_end - vma->vm_start; pgprot_t prot = vma->vm_page_prot; if (vma->vm_pgoff + vma_pages(vma) > lpc_ctrl->mem_size >> PAGE_SHIFT) return -EINVAL; /* ast2400/2500 AHB accesses are not cache coherent */ prot = pgprot_noncached(prot); if (remap_pfn_range(vma, vma->vm_start, (lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff, vsize, prot)) return -EAGAIN; return 0; } static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd, unsigned long param) { struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file); struct device *dev = file->private_data; void __user *p = (void __user *)param; struct aspeed_lpc_ctrl_mapping map; u32 addr; u32 size; long rc; if (copy_from_user(&map, p, sizeof(map))) return -EFAULT; if (map.flags != 0) return -EINVAL; switch (cmd) { case ASPEED_LPC_CTRL_IOCTL_GET_SIZE: /* The flash windows don't report their size */ if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY) return -EINVAL; /* Support more than one window id in the future */ if (map.window_id != 0) return -EINVAL; /* If memory-region is not described in device tree */ if (!lpc_ctrl->mem_size) { dev_dbg(dev, "Didn't find reserved memory\n"); return -ENXIO; } map.size = lpc_ctrl->mem_size; return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0; case ASPEED_LPC_CTRL_IOCTL_MAP: /* * The top half of HICR7 is the MSB of the BMC address of the * mapping. * The bottom half of HICR7 is the MSB of the HOST LPC * firmware space address of the mapping. * * The 1 bits in the top of half of HICR8 represent the bits * (in the requested address) that should be ignored and * replaced with those from the top half of HICR7. * The 1 bits in the bottom half of HICR8 represent the bits * (in the requested address) that should be kept and pass * into the BMC address space. */ /* * It doesn't make sense to talk about a size or offset with * low 16 bits set. Both HICR7 and HICR8 talk about the top 16 * bits of addresses and sizes. */ if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff)) return -EINVAL; /* * Because of the way the masks work in HICR8 offset has to * be a multiple of size. */ if (map.offset & (map.size - 1)) return -EINVAL; if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) { if (!lpc_ctrl->pnor_size) { dev_dbg(dev, "Didn't find host pnor flash\n"); return -ENXIO; } addr = lpc_ctrl->pnor_base; size = lpc_ctrl->pnor_size; } else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) { /* If memory-region is not described in device tree */ if (!lpc_ctrl->mem_size) { dev_dbg(dev, "Didn't find reserved memory\n"); return -ENXIO; } addr = lpc_ctrl->mem_base; size = lpc_ctrl->mem_size; } else { return -EINVAL; } /* Check overflow first! */ if (map.offset + map.size < map.offset || map.offset + map.size > size) return -EINVAL; if (map.size == 0 || map.size > size) return -EINVAL; addr += map.offset; /* * addr (host lpc address) is safe regardless of values. This * simply changes the address the host has to request on its * side of the LPC bus. This cannot impact the hosts own * memory space by surprise as LPC specific accessors are * required. The only strange thing that could be done is * setting the lower 16 bits but the shift takes care of that. */ rc = regmap_write(lpc_ctrl->regmap, HICR7, (addr | (map.addr >> 16))); if (rc) return rc; rc = regmap_write(lpc_ctrl->regmap, HICR8, (~(map.size - 1)) | ((map.size >> 16) - 1)); if (rc) return rc; /* * Switch to FWH2AHB mode, AST2600 only. */ if (lpc_ctrl->fwh2ahb) { /* * Enable FWH2AHB in SCU debug control register 2. This * does not turn it on, but makes it available for it * to be configured in HICR6. */ regmap_update_bits(lpc_ctrl->scu, 0x0D8, BIT(2), 0); /* * The other bits in this register are interrupt status bits * that are cleared by writing 1. As we don't want to clear * them, set only the bit of interest. */ regmap_write(lpc_ctrl->regmap, HICR6, SW_FWH2AHB); } /* * Enable LPC FHW cycles. This is required for the host to * access the regions specified. */ return regmap_update_bits(lpc_ctrl->regmap, HICR5, HICR5_ENFWH | HICR5_ENL2H, HICR5_ENFWH | HICR5_ENL2H); } return -EINVAL; } static const struct file_operations aspeed_lpc_ctrl_fops = { .owner = THIS_MODULE, .mmap = aspeed_lpc_ctrl_mmap, .unlocked_ioctl = aspeed_lpc_ctrl_ioctl, }; static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) { struct aspeed_lpc_ctrl *lpc_ctrl; struct device_node *node; struct resource resm; struct device *dev; struct device_node *np; int rc; dev = &pdev->dev; lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL); if (!lpc_ctrl) return -ENOMEM; /* If flash is described in device tree then store */ node = of_parse_phandle(dev->of_node, "flash", 0); if (!node) { dev_dbg(dev, "Didn't find host pnor flash node\n"); } else { rc = of_address_to_resource(node, 1, &resm); of_node_put(node); if (rc) { dev_err(dev, "Couldn't address to resource for flash\n"); return rc; } lpc_ctrl->pnor_size = resource_size(&resm); lpc_ctrl->pnor_base = resm.start; } dev_set_drvdata(&pdev->dev, lpc_ctrl); /* If memory-region is described in device tree then store */ node = of_parse_phandle(dev->of_node, "memory-region", 0); if (!node) { dev_dbg(dev, "Didn't find reserved memory\n"); } else { rc = of_address_to_resource(node, 0, &resm); of_node_put(node); if (rc) { dev_err(dev, "Couldn't address to resource for reserved memory\n"); return -ENXIO; } lpc_ctrl->mem_size = resource_size(&resm); lpc_ctrl->mem_base = resm.start; if (!is_power_of_2(lpc_ctrl->mem_size)) { dev_err(dev, "Reserved memory size must be a power of 2, got %u\n", (unsigned int)lpc_ctrl->mem_size); return -EINVAL; } if (!IS_ALIGNED(lpc_ctrl->mem_base, lpc_ctrl->mem_size)) { dev_err(dev, "Reserved memory must be naturally aligned for size %u\n", (unsigned int)lpc_ctrl->mem_size); return -EINVAL; } } np = pdev->dev.parent->of_node; if (!of_device_is_compatible(np, "aspeed,ast2400-lpc-v2") && !of_device_is_compatible(np, "aspeed,ast2500-lpc-v2") && !of_device_is_compatible(np, "aspeed,ast2600-lpc-v2")) { dev_err(dev, "unsupported LPC device binding\n"); return -ENODEV; } lpc_ctrl->regmap = syscon_node_to_regmap(np); if (IS_ERR(lpc_ctrl->regmap)) { dev_err(dev, "Couldn't get regmap\n"); return -ENODEV; } if (of_device_is_compatible(dev->of_node, "aspeed,ast2600-lpc-ctrl")) { lpc_ctrl->fwh2ahb = true; lpc_ctrl->scu = syscon_regmap_lookup_by_compatible("aspeed,ast2600-scu"); if (IS_ERR(lpc_ctrl->scu)) { dev_err(dev, "couldn't find scu\n"); return PTR_ERR(lpc_ctrl->scu); } } lpc_ctrl->clk = devm_clk_get(dev, NULL); if (IS_ERR(lpc_ctrl->clk)) return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk), "couldn't get clock\n"); rc = clk_prepare_enable(lpc_ctrl->clk); if (rc) { dev_err(dev, "couldn't enable clock\n"); return rc; } lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR; lpc_ctrl->miscdev.name = DEVICE_NAME; lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops; lpc_ctrl->miscdev.parent = dev; rc = misc_register(&lpc_ctrl->miscdev); if (rc) { dev_err(dev, "Unable to register device\n"); goto err; } return 0; err: clk_disable_unprepare(lpc_ctrl->clk); return rc; } static void aspeed_lpc_ctrl_remove(struct platform_device *pdev) { struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev); misc_deregister(&lpc_ctrl->miscdev); clk_disable_unprepare(lpc_ctrl->clk); } static const struct of_device_id aspeed_lpc_ctrl_match[] = { { .compatible = "aspeed,ast2400-lpc-ctrl" }, { .compatible = "aspeed,ast2500-lpc-ctrl" }, { .compatible = "aspeed,ast2600-lpc-ctrl" }, { }, }; static struct platform_driver aspeed_lpc_ctrl_driver = { .driver = { .name = DEVICE_NAME, .of_match_table = aspeed_lpc_ctrl_match, }, .probe = aspeed_lpc_ctrl_probe, .remove_new = aspeed_lpc_ctrl_remove, }; module_platform_driver(aspeed_lpc_ctrl_driver); MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>"); MODULE_DESCRIPTION("Control for ASPEED LPC HOST to BMC mappings");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1