| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Rajendra Nayak | 1512 | 53.09% | 5 | 8.77% |
| Tero Kristo | 1052 | 36.94% | 23 | 40.35% |
| Paul Walmsley | 147 | 5.16% | 7 | 12.28% |
| Tony Lindgren | 36 | 1.26% | 8 | 14.04% |
| Wang Qing | 31 | 1.09% | 1 | 1.75% |
| Nishanth Menon | 29 | 1.02% | 1 | 1.75% |
| Juha Yrjola | 14 | 0.49% | 1 | 1.75% |
| Kevin Hilman | 6 | 0.21% | 2 | 3.51% |
| Jeremy Vial | 5 | 0.18% | 1 | 1.75% |
| Florian Fainelli | 4 | 0.14% | 1 | 1.75% |
| Victor Kamensky | 3 | 0.11% | 1 | 1.75% |
| Roel Kluin | 2 | 0.07% | 1 | 1.75% |
| Thomas Gleixner | 2 | 0.07% | 1 | 1.75% |
| Ben Dooks | 2 | 0.07% | 1 | 1.75% |
| Jean Pihet | 1 | 0.04% | 1 | 1.75% |
| Manjunath Kondaiah G | 1 | 0.04% | 1 | 1.75% |
| Uwe Kleine-König | 1 | 0.04% | 1 | 1.75% |
| Total | 2848 | 57 |
// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2/3 System Control Module register access * * Copyright (C) 2007, 2012 Texas Instruments, Inc. * Copyright (C) 2007 Nokia Corporation * * Written by Paul Walmsley */ #undef DEBUG #include <linux/kernel.h> #include <linux/io.h> #include <linux/of_address.h> #include <linux/regmap.h> #include <linux/mfd/syscon.h> #include <linux/cpu_pm.h> #include "soc.h" #include "iomap.h" #include "common.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" #include "prm3xxx.h" #include "cm3xxx.h" #include "sdrc.h" #include "pm.h" #include "control.h" #include "clock.h" /* Used by omap3_ctrl_save_padconf() */ #define START_PADCONF_SAVE 0x2 #define PADCONF_SAVE_DONE 0x1 static void __iomem *omap2_ctrl_base; static s16 omap2_ctrl_offset; #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) struct omap3_scratchpad { u32 boot_config_ptr; u32 public_restore_ptr; u32 secure_ram_restore_ptr; u32 sdrc_module_semaphore; u32 prcm_block_offset; u32 sdrc_block_offset; }; struct omap3_scratchpad_prcm_block { u32 prm_contents[2]; u32 cm_contents[11]; u32 prcm_block_size; }; struct omap3_scratchpad_sdrc_block { u16 sysconfig; u16 cs_cfg; u16 sharing; u16 err_type; u32 dll_a_ctrl; u32 dll_b_ctrl; u32 power; u32 cs_0; u32 mcfg_0; u16 mr_0; u16 emr_1_0; u16 emr_2_0; u16 emr_3_0; u32 actim_ctrla_0; u32 actim_ctrlb_0; u32 rfr_ctrl_0; u32 cs_1; u32 mcfg_1; u16 mr_1; u16 emr_1_1; u16 emr_2_1; u16 emr_3_1; u32 actim_ctrla_1; u32 actim_ctrlb_1; u32 rfr_ctrl_1; u16 dcdl_1_ctrl; u16 dcdl_2_ctrl; u32 flags; u32 block_size; }; void *omap3_secure_ram_storage; /* * This is used to store ARM registers in SDRAM before attempting * an MPU OFF. The save and restore happens from the SRAM sleep code. * The address is stored in scratchpad, so that it can be used * during the restore path. */ u32 omap3_arm_context[128]; struct omap3_control_regs { u32 sysconfig; u32 devconf0; u32 mem_dftrw0; u32 mem_dftrw1; u32 msuspendmux_0; u32 msuspendmux_1; u32 msuspendmux_2; u32 msuspendmux_3; u32 msuspendmux_4; u32 msuspendmux_5; u32 sec_ctrl; u32 devconf1; u32 csirxfe; u32 iva2_bootaddr; u32 iva2_bootmod; u32 wkup_ctrl; u32 debobs_0; u32 debobs_1; u32 debobs_2; u32 debobs_3; u32 debobs_4; u32 debobs_5; u32 debobs_6; u32 debobs_7; u32 debobs_8; u32 prog_io0; u32 prog_io1; u32 dss_dpll_spreading; u32 core_dpll_spreading; u32 per_dpll_spreading; u32 usbhost_dpll_spreading; u32 pbias_lite; u32 temp_sensor; u32 sramldo4; u32 sramldo5; u32 csi; u32 padconf_sys_nirq; }; static struct omap3_control_regs control_context; #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ u8 omap_ctrl_readb(u16 offset) { u32 val; u8 byte_offset = offset & 0x3; val = omap_ctrl_readl(offset); return (val >> (byte_offset * 8)) & 0xff; } u16 omap_ctrl_readw(u16 offset) { u32 val; u16 byte_offset = offset & 0x2; val = omap_ctrl_readl(offset); return (val >> (byte_offset * 8)) & 0xffff; } u32 omap_ctrl_readl(u16 offset) { offset &= 0xfffc; return readl_relaxed(omap2_ctrl_base + offset); } void omap_ctrl_writeb(u8 val, u16 offset) { u32 tmp; u8 byte_offset = offset & 0x3; tmp = omap_ctrl_readl(offset); tmp &= 0xffffffff ^ (0xff << (byte_offset * 8)); tmp |= val << (byte_offset * 8); omap_ctrl_writel(tmp, offset); } void omap_ctrl_writew(u16 val, u16 offset) { u32 tmp; u8 byte_offset = offset & 0x2; tmp = omap_ctrl_readl(offset); tmp &= 0xffffffff ^ (0xffff << (byte_offset * 8)); tmp |= val << (byte_offset * 8); omap_ctrl_writel(tmp, offset); } void omap_ctrl_writel(u32 val, u16 offset) { offset &= 0xfffc; writel_relaxed(val, omap2_ctrl_base + offset); } #ifdef CONFIG_ARCH_OMAP3 /** * omap3_ctrl_write_boot_mode - set scratchpad boot mode for the next boot * @bootmode: 8-bit value to pass to some boot code * * Set the bootmode in the scratchpad RAM. This is used after the * system restarts. Not sure what actually uses this - it may be the * bootloader, rather than the boot ROM - contrary to the preserved * comment below. No return value. */ void omap3_ctrl_write_boot_mode(u8 bootmode) { u32 l; l = ('B' << 24) | ('M' << 16) | bootmode; /* * Reserve the first word in scratchpad for communicating * with the boot ROM. A pointer to a data structure * describing the boot process can be stored there, * cf. OMAP34xx TRM, Initialization / Software Booting * Configuration. * * XXX This should use some omap_ctrl_writel()-type function */ writel_relaxed(l, OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD + 4)); } #endif #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) /* Populate the scratchpad structure with restore structure */ void omap3_save_scratchpad_contents(void) { void __iomem *scratchpad_address; u32 arm_context_addr; struct omap3_scratchpad scratchpad_contents; struct omap3_scratchpad_prcm_block prcm_block_contents; struct omap3_scratchpad_sdrc_block sdrc_block_contents; /* * Populate the Scratchpad contents * * The "get_*restore_pointer" functions are used to provide a * physical restore address where the ROM code jumps while waking * up from MPU OFF/OSWR state. * The restore pointer is stored into the scratchpad. */ scratchpad_contents.boot_config_ptr = 0x0; if (cpu_is_omap3630()) scratchpad_contents.public_restore_ptr = __pa_symbol(omap3_restore_3630); else if (omap_rev() != OMAP3430_REV_ES3_0 && omap_rev() != OMAP3430_REV_ES3_1 && omap_rev() != OMAP3430_REV_ES3_1_2) scratchpad_contents.public_restore_ptr = __pa_symbol(omap3_restore); else scratchpad_contents.public_restore_ptr = __pa_symbol(omap3_restore_es3); if (omap_type() == OMAP2_DEVICE_TYPE_GP) scratchpad_contents.secure_ram_restore_ptr = 0x0; else scratchpad_contents.secure_ram_restore_ptr = (u32) __pa(omap3_secure_ram_storage); scratchpad_contents.sdrc_module_semaphore = 0x0; scratchpad_contents.prcm_block_offset = 0x2C; scratchpad_contents.sdrc_block_offset = 0x64; /* Populate the PRCM block contents */ omap3_prm_save_scratchpad_contents(prcm_block_contents.prm_contents); omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents); prcm_block_contents.prcm_block_size = 0x0; /* Populate the SDRC block contents */ sdrc_block_contents.sysconfig = (sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF); sdrc_block_contents.cs_cfg = (sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF); sdrc_block_contents.sharing = (sdrc_read_reg(SDRC_SHARING) & 0xFFFF); sdrc_block_contents.err_type = (sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF); sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL); sdrc_block_contents.dll_b_ctrl = 0x0; /* * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should * be programed to issue automatic self refresh on timeout * of AUTO_CNT = 1 prior to any transition to OFF mode. */ if ((omap_type() != OMAP2_DEVICE_TYPE_GP) && (omap_rev() >= OMAP3430_REV_ES3_0)) sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) & ~(SDRC_POWER_AUTOCOUNT_MASK| SDRC_POWER_CLKCTRL_MASK)) | (1 << SDRC_POWER_AUTOCOUNT_SHIFT) | SDRC_SELF_REFRESH_ON_AUTOCOUNT; else sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER); sdrc_block_contents.cs_0 = 0x0; sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0); sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF); sdrc_block_contents.emr_1_0 = 0x0; sdrc_block_contents.emr_2_0 = 0x0; sdrc_block_contents.emr_3_0 = 0x0; sdrc_block_contents.actim_ctrla_0 = sdrc_read_reg(SDRC_ACTIM_CTRL_A_0); sdrc_block_contents.actim_ctrlb_0 = sdrc_read_reg(SDRC_ACTIM_CTRL_B_0); sdrc_block_contents.rfr_ctrl_0 = sdrc_read_reg(SDRC_RFR_CTRL_0); sdrc_block_contents.cs_1 = 0x0; sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1); sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF; sdrc_block_contents.emr_1_1 = 0x0; sdrc_block_contents.emr_2_1 = 0x0; sdrc_block_contents.emr_3_1 = 0x0; sdrc_block_contents.actim_ctrla_1 = sdrc_read_reg(SDRC_ACTIM_CTRL_A_1); sdrc_block_contents.actim_ctrlb_1 = sdrc_read_reg(SDRC_ACTIM_CTRL_B_1); sdrc_block_contents.rfr_ctrl_1 = sdrc_read_reg(SDRC_RFR_CTRL_1); sdrc_block_contents.dcdl_1_ctrl = 0x0; sdrc_block_contents.dcdl_2_ctrl = 0x0; sdrc_block_contents.flags = 0x0; sdrc_block_contents.block_size = 0x0; arm_context_addr = __pa_symbol(omap3_arm_context); /* Copy all the contents to the scratchpad location */ scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); memcpy_toio(scratchpad_address, &scratchpad_contents, sizeof(scratchpad_contents)); /* Scratchpad contents being 32 bits, a divide by 4 done here */ memcpy_toio(scratchpad_address + scratchpad_contents.prcm_block_offset, &prcm_block_contents, sizeof(prcm_block_contents)); memcpy_toio(scratchpad_address + scratchpad_contents.sdrc_block_offset, &sdrc_block_contents, sizeof(sdrc_block_contents)); /* * Copies the address of the location in SDRAM where ARM * registers get saved during a MPU OFF transition. */ memcpy_toio(scratchpad_address + scratchpad_contents.sdrc_block_offset + sizeof(sdrc_block_contents), &arm_context_addr, 4); } void omap3_control_save_context(void) { control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG); control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0); control_context.mem_dftrw0 = omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0); control_context.mem_dftrw1 = omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1); control_context.msuspendmux_0 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0); control_context.msuspendmux_1 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1); control_context.msuspendmux_2 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2); control_context.msuspendmux_3 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3); control_context.msuspendmux_4 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4); control_context.msuspendmux_5 = omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5); control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL); control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1); control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE); control_context.iva2_bootaddr = omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR); control_context.iva2_bootmod = omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD); control_context.wkup_ctrl = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL); control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0)); control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1)); control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2)); control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3)); control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4)); control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5)); control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6)); control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7)); control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8)); control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0); control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1); control_context.dss_dpll_spreading = omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING); control_context.core_dpll_spreading = omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING); control_context.per_dpll_spreading = omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING); control_context.usbhost_dpll_spreading = omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); control_context.pbias_lite = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE); control_context.temp_sensor = omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR); control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4); control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5); control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI); control_context.padconf_sys_nirq = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ); } void omap3_control_restore_context(void) { omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG); omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0); omap_ctrl_writel(control_context.mem_dftrw0, OMAP343X_CONTROL_MEM_DFTRW0); omap_ctrl_writel(control_context.mem_dftrw1, OMAP343X_CONTROL_MEM_DFTRW1); omap_ctrl_writel(control_context.msuspendmux_0, OMAP2_CONTROL_MSUSPENDMUX_0); omap_ctrl_writel(control_context.msuspendmux_1, OMAP2_CONTROL_MSUSPENDMUX_1); omap_ctrl_writel(control_context.msuspendmux_2, OMAP2_CONTROL_MSUSPENDMUX_2); omap_ctrl_writel(control_context.msuspendmux_3, OMAP2_CONTROL_MSUSPENDMUX_3); omap_ctrl_writel(control_context.msuspendmux_4, OMAP2_CONTROL_MSUSPENDMUX_4); omap_ctrl_writel(control_context.msuspendmux_5, OMAP2_CONTROL_MSUSPENDMUX_5); omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL); omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1); omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE); omap_ctrl_writel(control_context.iva2_bootaddr, OMAP343X_CONTROL_IVA2_BOOTADDR); omap_ctrl_writel(control_context.iva2_bootmod, OMAP343X_CONTROL_IVA2_BOOTMOD); omap_ctrl_writel(control_context.wkup_ctrl, OMAP34XX_CONTROL_WKUP_CTRL); omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0)); omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1)); omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2)); omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3)); omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4)); omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5)); omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6)); omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7)); omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8)); omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0); omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1); omap_ctrl_writel(control_context.dss_dpll_spreading, OMAP343X_CONTROL_DSS_DPLL_SPREADING); omap_ctrl_writel(control_context.core_dpll_spreading, OMAP343X_CONTROL_CORE_DPLL_SPREADING); omap_ctrl_writel(control_context.per_dpll_spreading, OMAP343X_CONTROL_PER_DPLL_SPREADING); omap_ctrl_writel(control_context.usbhost_dpll_spreading, OMAP343X_CONTROL_USBHOST_DPLL_SPREADING); omap_ctrl_writel(control_context.pbias_lite, OMAP343X_CONTROL_PBIAS_LITE); omap_ctrl_writel(control_context.temp_sensor, OMAP343X_CONTROL_TEMP_SENSOR); omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4); omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5); omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI); omap_ctrl_writel(control_context.padconf_sys_nirq, OMAP343X_CONTROL_PADCONF_SYSNIRQ); } void omap3630_ctrl_disable_rta(void) { if (!cpu_is_omap3630()) return; omap_ctrl_writel(OMAP36XX_RTA_DISABLE, OMAP36XX_CONTROL_MEM_RTA_CTRL); } /** * omap3_ctrl_save_padconf - save padconf registers to scratchpad RAM * * Tell the SCM to start saving the padconf registers, then wait for * the process to complete. Returns 0 unconditionally, although it * should also eventually be able to return -ETIMEDOUT, if the save * does not complete. * * XXX This function is missing a timeout. What should it be? */ int omap3_ctrl_save_padconf(void) { u32 cpo; /* Save the padconf registers */ cpo = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF); cpo |= START_PADCONF_SAVE; omap_ctrl_writel(cpo, OMAP343X_CONTROL_PADCONF_OFF); /* wait for the save to complete */ while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS) & PADCONF_SAVE_DONE)) udelay(1); return 0; } /** * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle * * Sets the bootmode for IVA2 to idle. This is needed by the PM code to * force disable IVA2 so that it does not prevent any low-power states. */ static void __init omap3_ctrl_set_iva_bootmode_idle(void) { omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE, OMAP343X_CONTROL_IVA2_BOOTMOD); } /** * omap3_ctrl_setup_d2d_padconf - setup stacked modem pads for idle * * Sets up the pads controlling the stacked modem in such way that the * device can enter idle. */ static void __init omap3_ctrl_setup_d2d_padconf(void) { u16 mask, padconf; /* * In a stand alone OMAP3430 where there is not a stacked * modem for the D2D Idle Ack and D2D MStandby must be pulled * high. S CONTROL_PADCONF_SAD2D_IDLEACK and * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY); padconf |= mask; omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY); padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK); padconf |= mask; omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK); } /** * omap3_ctrl_init - does static initializations for control module * * Initializes system control module. This sets up the sysconfig autoidle, * and sets up modem and iva2 so that they can be idled properly. */ void __init omap3_ctrl_init(void) { omap_ctrl_writel(OMAP3430_AUTOIDLE_MASK, OMAP2_CONTROL_SYSCONFIG); omap3_ctrl_set_iva_bootmode_idle(); omap3_ctrl_setup_d2d_padconf(); } #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */ static unsigned long am43xx_control_reg_offsets[] = { AM33XX_CONTROL_SYSCONFIG_OFFSET, AM33XX_CONTROL_STATUS_OFFSET, AM43XX_CONTROL_MPU_L2_CTRL_OFFSET, AM33XX_CONTROL_CORE_SLDO_CTRL_OFFSET, AM33XX_CONTROL_MPU_SLDO_CTRL_OFFSET, AM33XX_CONTROL_CLK32KDIVRATIO_CTRL_OFFSET, AM33XX_CONTROL_BANDGAP_CTRL_OFFSET, AM33XX_CONTROL_BANDGAP_TRIM_OFFSET, AM33XX_CONTROL_PLL_CLKINPULOW_CTRL_OFFSET, AM33XX_CONTROL_MOSC_CTRL_OFFSET, AM33XX_CONTROL_DEEPSLEEP_CTRL_OFFSET, AM43XX_CONTROL_DISPLAY_PLL_SEL_OFFSET, AM33XX_CONTROL_INIT_PRIORITY_0_OFFSET, AM33XX_CONTROL_INIT_PRIORITY_1_OFFSET, AM33XX_CONTROL_TPTC_CFG_OFFSET, AM33XX_CONTROL_USB_CTRL0_OFFSET, AM33XX_CONTROL_USB_CTRL1_OFFSET, AM43XX_CONTROL_USB_CTRL2_OFFSET, AM43XX_CONTROL_GMII_SEL_OFFSET, AM43XX_CONTROL_MPUSS_CTRL_OFFSET, AM43XX_CONTROL_TIMER_CASCADE_CTRL_OFFSET, AM43XX_CONTROL_PWMSS_CTRL_OFFSET, AM33XX_CONTROL_MREQPRIO_0_OFFSET, AM33XX_CONTROL_MREQPRIO_1_OFFSET, AM33XX_CONTROL_HW_EVENT_SEL_GRP1_OFFSET, AM33XX_CONTROL_HW_EVENT_SEL_GRP2_OFFSET, AM33XX_CONTROL_HW_EVENT_SEL_GRP3_OFFSET, AM33XX_CONTROL_HW_EVENT_SEL_GRP4_OFFSET, AM33XX_CONTROL_SMRT_CTRL_OFFSET, AM33XX_CONTROL_MPUSS_HW_DEBUG_SEL_OFFSET, AM43XX_CONTROL_CQDETECT_STS_OFFSET, AM43XX_CONTROL_CQDETECT_STS2_OFFSET, AM43XX_CONTROL_VTP_CTRL_OFFSET, AM33XX_CONTROL_VREF_CTRL_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_0_3_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_4_7_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_8_11_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_12_15_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_16_19_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_20_23_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_24_27_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_28_31_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_32_35_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_36_39_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_40_43_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_44_47_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_48_51_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_52_55_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_56_59_OFFSET, AM33XX_CONTROL_TPCC_EVT_MUX_60_63_OFFSET, AM33XX_CONTROL_TIMER_EVT_CAPT_OFFSET, AM33XX_CONTROL_ECAP_EVT_CAPT_OFFSET, AM33XX_CONTROL_ADC_EVT_CAPT_OFFSET, AM43XX_CONTROL_ADC1_EVT_CAPT_OFFSET, AM33XX_CONTROL_RESET_ISO_OFFSET, }; static u32 am33xx_control_vals[ARRAY_SIZE(am43xx_control_reg_offsets)]; /** * am43xx_control_save_context - Save the wakeup domain registers * * Save the wkup domain registers */ static void am43xx_control_save_context(void) { int i; for (i = 0; i < ARRAY_SIZE(am43xx_control_reg_offsets); i++) am33xx_control_vals[i] = omap_ctrl_readl(am43xx_control_reg_offsets[i]); } /** * am43xx_control_restore_context - Restore the wakeup domain registers * * Restore the wkup domain registers */ static void am43xx_control_restore_context(void) { int i; for (i = 0; i < ARRAY_SIZE(am43xx_control_reg_offsets); i++) omap_ctrl_writel(am33xx_control_vals[i], am43xx_control_reg_offsets[i]); } static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v) { switch (cmd) { case CPU_CLUSTER_PM_ENTER: if (enable_off_mode) am43xx_control_save_context(); break; case CPU_CLUSTER_PM_EXIT: if (enable_off_mode) am43xx_control_restore_context(); break; } return NOTIFY_OK; } struct control_init_data { int index; void __iomem *mem; s16 offset; }; static struct control_init_data ctrl_data = { .index = TI_CLKM_CTRL, }; static const struct control_init_data omap2_ctrl_data = { .index = TI_CLKM_CTRL, .offset = -OMAP2_CONTROL_GENERAL, }; static const struct control_init_data ctrl_aux_data = { .index = TI_CLKM_CTRL_AUX, }; static const struct of_device_id omap_scrm_dt_match_table[] = { { .compatible = "ti,am3-scm", .data = &ctrl_data }, { .compatible = "ti,am4-scm", .data = &ctrl_data }, { .compatible = "ti,omap2-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,omap3-scm", .data = &omap2_ctrl_data }, { .compatible = "ti,dm814-scm", .data = &ctrl_data }, { .compatible = "ti,dm816-scrm", .data = &ctrl_data }, { .compatible = "ti,omap4-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-core", .data = &ctrl_data }, { .compatible = "ti,omap5-scm-wkup-pad-conf", .data = &ctrl_aux_data }, { .compatible = "ti,dra7-scm-core", .data = &ctrl_data }, { } }; /** * omap2_control_base_init - initialize iomappings for the control driver * * Detects and initializes the iomappings for the control driver, based * on the DT data. Returns 0 in success, negative error value * otherwise. */ int __init omap2_control_base_init(void) { struct device_node *np; const struct of_device_id *match; struct control_init_data *data; void __iomem *mem; for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { data = (struct control_init_data *)match->data; mem = of_iomap(np, 0); if (!mem) { of_node_put(np); return -ENOMEM; } if (data->index == TI_CLKM_CTRL) { omap2_ctrl_base = mem; omap2_ctrl_offset = data->offset; } data->mem = mem; } return 0; } /** * omap_control_init - low level init for the control driver * * Initializes the low level clock infrastructure for control driver. * Returns 0 in success, negative error value in failure. */ int __init omap_control_init(void) { struct device_node *np, *scm_conf; const struct of_device_id *match; const struct omap_prcm_init_data *data; int ret; struct regmap *syscon; static struct notifier_block nb; for_each_matching_node_and_match(np, omap_scrm_dt_match_table, &match) { data = match->data; /* * Check if we have scm_conf node, if yes, use this to * access clock registers. */ scm_conf = of_get_child_by_name(np, "scm_conf"); if (scm_conf) { syscon = syscon_node_to_regmap(scm_conf); if (IS_ERR(syscon)) { ret = PTR_ERR(syscon); goto of_node_put; } if (of_get_child_by_name(scm_conf, "clocks")) { ret = omap2_clk_provider_init(scm_conf, data->index, syscon, NULL); if (ret) goto of_node_put; } } else { /* No scm_conf found, direct access */ ret = omap2_clk_provider_init(np, data->index, NULL, data->mem); if (ret) goto of_node_put; } } /* Only AM43XX can lose ctrl registers context during rtc-ddr suspend */ if (soc_is_am43xx()) { nb.notifier_call = cpu_notifier; cpu_pm_register_notifier(&nb); } return 0; of_node_put: of_node_put(np); return ret; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1