Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Paul Walmsley | 458 | 73.40% | 14 | 46.67% |
Tero Kristo | 80 | 12.82% | 7 | 23.33% |
Rajendra Nayak | 77 | 12.34% | 5 | 16.67% |
Kevin Hilman | 5 | 0.80% | 2 | 6.67% |
Peter 'p2' De Schrijver | 2 | 0.32% | 1 | 3.33% |
Thomas Gleixner | 2 | 0.32% | 1 | 3.33% |
Total | 624 | 30 |
// SPDX-License-Identifier: GPL-2.0-only /* * OMAP2xxx PRM module functions * * Copyright (C) 2010-2012 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley * Rajendra Nayak <rnayak@ti.com> */ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> #include <linux/irq.h> #include "powerdomain.h" #include "clockdomain.h" #include "prm2xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" /* * OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits - * these are reversed from the bits used on OMAP3+ */ #define OMAP24XX_PWRDM_POWER_ON 0x0 #define OMAP24XX_PWRDM_POWER_RET 0x1 #define OMAP24XX_PWRDM_POWER_OFF 0x3 /* * omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP * hardware register (which are specific to the OMAP2xxx SoCs) to * reset source ID bit shifts (which is an OMAP SoC-independent * enumeration) */ static struct prm_reset_src_map omap2xxx_prm_reset_src_map[] = { { OMAP_GLOBALCOLD_RST_SHIFT, OMAP_GLOBAL_COLD_RST_SRC_ID_SHIFT }, { OMAP_GLOBALWARM_RST_SHIFT, OMAP_GLOBAL_WARM_RST_SRC_ID_SHIFT }, { OMAP24XX_SECU_VIOL_RST_SHIFT, OMAP_SECU_VIOL_RST_SRC_ID_SHIFT }, { OMAP24XX_MPU_WD_RST_SHIFT, OMAP_MPU_WD_RST_SRC_ID_SHIFT }, { OMAP24XX_SECU_WD_RST_SHIFT, OMAP_SECU_WD_RST_SRC_ID_SHIFT }, { OMAP24XX_EXTWMPU_RST_SHIFT, OMAP_EXTWARM_RST_SRC_ID_SHIFT }, { -1, -1 }, }; /** * omap2xxx_prm_read_reset_sources - return the last SoC reset source * * Return a u32 representing the last reset sources of the SoC. The * returned reset source bits are standardized across OMAP SoCs. */ static u32 omap2xxx_prm_read_reset_sources(void) { struct prm_reset_src_map *p; u32 r = 0; u32 v; v = omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST); p = omap2xxx_prm_reset_src_map; while (p->reg_shift >= 0 && p->std_shift >= 0) { if (v & (1 << p->reg_shift)) r |= 1 << p->std_shift; p++; } return r; } /** * omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst * @omap2xxx_pwrst: OMAP2xxx hardware power state to convert * * Return the common power state bits corresponding to the OMAP2xxx * hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error. */ static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst) { u8 pwrst; switch (omap2xxx_pwrst) { case OMAP24XX_PWRDM_POWER_OFF: pwrst = PWRDM_POWER_OFF; break; case OMAP24XX_PWRDM_POWER_RET: pwrst = PWRDM_POWER_RET; break; case OMAP24XX_PWRDM_POWER_ON: pwrst = PWRDM_POWER_ON; break; default: return -EINVAL; } return pwrst; } /** * omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC * * Set the DPLL reset bit, which should reboot the SoC. This is the * recommended way to restart the SoC. No return value. */ static void omap2xxx_prm_dpll_reset(void) { omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD, OMAP2_RM_RSTCTRL); /* OCP barrier */ omap2_prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTCTRL); } /** * omap2xxx_prm_clear_mod_irqs - clear wakeup status bits for a module * @module: PRM module to clear wakeups from * @regs: register offset to clear * @wkst_mask: wakeup status mask to clear * * Clears wakeup status bits for a given module, so that the device can * re-enter idle. */ static int omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask) { u32 wkst; wkst = omap2_prm_read_mod_reg(module, regs); wkst &= wkst_mask; omap2_prm_write_mod_reg(wkst, module, regs); return 0; } int omap2xxx_clkdm_sleep(struct clockdomain *clkdm) { omap2_prm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); return 0; } int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm) { omap2_prm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK, clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL); return 0; } static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst) { u8 omap24xx_pwrst; switch (pwrst) { case PWRDM_POWER_OFF: omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF; break; case PWRDM_POWER_RET: omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET; break; case PWRDM_POWER_ON: omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON; break; default: return -EINVAL; } omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK, (omap24xx_pwrst << OMAP_POWERSTATE_SHIFT), pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL); return 0; } static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm) { u8 omap2xxx_pwrst; omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL, OMAP_POWERSTATE_MASK); return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst); } static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm) { u8 omap2xxx_pwrst; omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs, OMAP2_PM_PWSTST, OMAP_POWERSTATEST_MASK); return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst); } struct pwrdm_ops omap2_pwrdm_operations = { .pwrdm_set_next_pwrst = omap2xxx_pwrdm_set_next_pwrst, .pwrdm_read_next_pwrst = omap2xxx_pwrdm_read_next_pwrst, .pwrdm_read_pwrst = omap2xxx_pwrdm_read_pwrst, .pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst, .pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst, .pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst, .pwrdm_read_mem_pwrst = omap2_pwrdm_read_mem_pwrst, .pwrdm_read_mem_retst = omap2_pwrdm_read_mem_retst, .pwrdm_wait_transition = omap2_pwrdm_wait_transition, }; /* * */ static struct prm_ll_data omap2xxx_prm_ll_data = { .read_reset_sources = &omap2xxx_prm_read_reset_sources, .assert_hardreset = &omap2_prm_assert_hardreset, .deassert_hardreset = &omap2_prm_deassert_hardreset, .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted, .reset_system = &omap2xxx_prm_dpll_reset, .clear_mod_irqs = &omap2xxx_prm_clear_mod_irqs, }; int __init omap2xxx_prm_init(const struct omap_prcm_init_data *data) { return prm_register(&omap2xxx_prm_ll_data); } static void __exit omap2xxx_prm_exit(void) { prm_unregister(&omap2xxx_prm_ll_data); } __exitcall(omap2xxx_prm_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1