Contributors: 5
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Greg Ungerer |
140 |
42.42% |
11 |
57.89% |
| Steven King |
94 |
28.48% |
5 |
26.32% |
| Arnd Bergmann |
94 |
28.48% |
1 |
5.26% |
| Wang Jingjin |
1 |
0.30% |
1 |
5.26% |
| Greg Kroah-Hartman |
1 |
0.30% |
1 |
5.26% |
| Total |
330 |
|
19 |
|
// SPDX-License-Identifier: GPL-2.0
/***************************************************************************/
/*
* m523x.c -- platform support for ColdFire 523x based boards
*
* Sub-architcture dependent initialization code for the Freescale
* 523x CPUs.
*
* Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/clkdev.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfclk.h>
/***************************************************************************/
DEFINE_CLK(pll, "pll.0", MCF_CLK);
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
static struct clk_lookup m523x_clk_lookup[] = {
CLKDEV_INIT(NULL, "pll.0", &clk_pll),
CLKDEV_INIT(NULL, "sys.0", &clk_sys),
CLKDEV_INIT("mcfpit.0", NULL, &clk_pll),
CLKDEV_INIT("mcfpit.1", NULL, &clk_pll),
CLKDEV_INIT("mcfpit.2", NULL, &clk_pll),
CLKDEV_INIT("mcfpit.3", NULL, &clk_pll),
CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
CLKDEV_INIT("mcfuart.2", NULL, &clk_sys),
CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
CLKDEV_INIT("fec.0", NULL, &clk_sys),
CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
};
/***************************************************************************/
static void __init m523x_qspi_init(void)
{
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
u16 par;
/* setup QSPS pins for QSPI with gpio CS control */
writeb(0x1f, MCFGPIO_PAR_QSPI);
/* and CS2 & CS3 as gpio */
par = readw(MCFGPIO_PAR_TIMER);
par &= 0x3f3f;
writew(par, MCFGPIO_PAR_TIMER);
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
}
/***************************************************************************/
static void __init m523x_i2c_init(void)
{
#if IS_ENABLED(CONFIG_I2C_IMX)
u8 par;
/* setup Port AS Pin Assignment Register for I2C */
/* set PASPA0 to SCL and PASPA1 to SDA */
par = readb(MCFGPIO_PAR_FECI2C);
par |= 0x0f;
writeb(par, MCFGPIO_PAR_FECI2C);
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
}
/***************************************************************************/
static void __init m523x_fec_init(void)
{
/* Set multi-function pins to ethernet use */
writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
}
/***************************************************************************/
void __init config_BSP(char *commandp, int size)
{
mach_sched_init = hw_timer_init;
m523x_fec_init();
m523x_qspi_init();
m523x_i2c_init();
clkdev_add_table(m523x_clk_lookup, ARRAY_SIZE(m523x_clk_lookup));
}
/***************************************************************************/