Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Manuel Lauss | 4876 | 89.85% | 20 | 54.05% |
Andrew Morton | 178 | 3.28% | 2 | 5.41% |
Ralf Baechle | 154 | 2.84% | 4 | 10.81% |
Thomas Gleixner | 104 | 1.92% | 3 | 8.11% |
Linus Torvalds | 63 | 1.16% | 1 | 2.70% |
Pete Popov | 38 | 0.70% | 2 | 5.41% |
Atsushi Nemoto | 7 | 0.13% | 1 | 2.70% |
Linus Torvalds (pre-git) | 6 | 0.11% | 3 | 8.11% |
Sergei Shtylyov | 1 | 0.02% | 1 | 2.70% |
Total | 5427 | 37 |
/* * Copyright 2001, 2007-2008 MontaVista Software Inc. * Author: MontaVista Software, Inc. <source@mvista.com> * * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/export.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/syscore_ops.h> #include <asm/irq_cpu.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio-au1300.h> /* Interrupt Controller register offsets */ #define IC_CFG0RD 0x40 #define IC_CFG0SET 0x40 #define IC_CFG0CLR 0x44 #define IC_CFG1RD 0x48 #define IC_CFG1SET 0x48 #define IC_CFG1CLR 0x4C #define IC_CFG2RD 0x50 #define IC_CFG2SET 0x50 #define IC_CFG2CLR 0x54 #define IC_REQ0INT 0x54 #define IC_SRCRD 0x58 #define IC_SRCSET 0x58 #define IC_SRCCLR 0x5C #define IC_REQ1INT 0x5C #define IC_ASSIGNRD 0x60 #define IC_ASSIGNSET 0x60 #define IC_ASSIGNCLR 0x64 #define IC_WAKERD 0x68 #define IC_WAKESET 0x68 #define IC_WAKECLR 0x6C #define IC_MASKRD 0x70 #define IC_MASKSET 0x70 #define IC_MASKCLR 0x74 #define IC_RISINGRD 0x78 #define IC_RISINGCLR 0x78 #define IC_FALLINGRD 0x7C #define IC_FALLINGCLR 0x7C #define IC_TESTBIT 0x80 /* per-processor fixed function irqs */ struct alchemy_irqmap { int irq; /* linux IRQ number */ int type; /* IRQ_TYPE_ */ int prio; /* irq priority, 0 highest, 3 lowest */ int internal; /* GPIC: internal source (no ext. pin)? */ }; static int au1x_ic_settype(struct irq_data *d, unsigned int type); static int au1300_gpic_settype(struct irq_data *d, unsigned int type); /* NOTE on interrupt priorities: The original writers of this code said: * * Because of the tight timing of SETUP token to reply transactions, * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) * needs the highest priority. */ struct alchemy_irqmap au1000_irqmap[] __initdata = { { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1500_irqmap[] __initdata = { { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1100_irqmap[] __initdata = { { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1550_irqmap[] __initdata = { { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0, 0 }, { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 1, 0 }, { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; struct alchemy_irqmap au1200_irqmap[] __initdata = { { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 0 }, { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 1, 0 }, { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0 }, { -1, }, }; static struct alchemy_irqmap au1300_irqmap[] __initdata = { /* multifunction: gpio pin or device */ { AU1300_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_SD1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_SD2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, { AU1300_NAND_INT, IRQ_TYPE_LEVEL_HIGH, 1, 0, }, /* au1300 internal */ { AU1300_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_MMU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_MPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_GPU_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_UDMA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_TOY_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_RTC_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0, 1, }, { AU1300_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_SD0_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_USB_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_BSA_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_MPE_INT, IRQ_TYPE_EDGE_RISING, 1, 1, }, { AU1300_ITE_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_AES_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { AU1300_CIM_INT, IRQ_TYPE_LEVEL_HIGH, 1, 1, }, { -1, }, /* terminator */ }; /******************************************************************************/ static void au1x_ic0_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); __raw_writel(1 << bit, base + IC_MASKSET); __raw_writel(1 << bit, base + IC_WAKESET); wmb(); } static void au1x_ic1_unmask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); __raw_writel(1 << bit, base + IC_MASKSET); __raw_writel(1 << bit, base + IC_WAKESET); wmb(); } static void au1x_ic0_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); __raw_writel(1 << bit, base + IC_MASKCLR); __raw_writel(1 << bit, base + IC_WAKECLR); wmb(); } static void au1x_ic1_mask(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); __raw_writel(1 << bit, base + IC_MASKCLR); __raw_writel(1 << bit, base + IC_WAKECLR); wmb(); } static void au1x_ic0_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ __raw_writel(1 << bit, base + IC_FALLINGCLR); __raw_writel(1 << bit, base + IC_RISINGCLR); wmb(); } static void au1x_ic1_ack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); /* * This may assume that we don't get interrupts from * both edges at once, or if we do, that we don't care. */ __raw_writel(1 << bit, base + IC_FALLINGCLR); __raw_writel(1 << bit, base + IC_RISINGCLR); wmb(); } static void au1x_ic0_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC0_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); __raw_writel(1 << bit, base + IC_WAKECLR); __raw_writel(1 << bit, base + IC_MASKCLR); __raw_writel(1 << bit, base + IC_RISINGCLR); __raw_writel(1 << bit, base + IC_FALLINGCLR); wmb(); } static void au1x_ic1_maskack(struct irq_data *d) { unsigned int bit = d->irq - AU1000_INTC1_INT_BASE; void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); __raw_writel(1 << bit, base + IC_WAKECLR); __raw_writel(1 << bit, base + IC_MASKCLR); __raw_writel(1 << bit, base + IC_RISINGCLR); __raw_writel(1 << bit, base + IC_FALLINGCLR); wmb(); } static int au1x_ic1_setwake(struct irq_data *d, unsigned int on) { int bit = d->irq - AU1000_INTC1_INT_BASE; unsigned long wakemsk, flags; /* only GPIO 0-7 can act as wakeup source. Fortunately these * are wired up identically on all supported variants. */ if ((bit < 0) || (bit > 7)) return -EINVAL; local_irq_save(flags); wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK); if (on) wakemsk |= 1 << bit; else wakemsk &= ~(1 << bit); alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK); local_irq_restore(flags); return 0; } /* * irq_chips for both ICs; this way the mask handlers can be * as short as possible. */ static struct irq_chip au1x_ic0_chip = { .name = "Alchemy-IC0", .irq_ack = au1x_ic0_ack, .irq_mask = au1x_ic0_mask, .irq_mask_ack = au1x_ic0_maskack, .irq_unmask = au1x_ic0_unmask, .irq_set_type = au1x_ic_settype, }; static struct irq_chip au1x_ic1_chip = { .name = "Alchemy-IC1", .irq_ack = au1x_ic1_ack, .irq_mask = au1x_ic1_mask, .irq_mask_ack = au1x_ic1_maskack, .irq_unmask = au1x_ic1_unmask, .irq_set_type = au1x_ic_settype, .irq_set_wake = au1x_ic1_setwake, }; static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type) { struct irq_chip *chip; unsigned int bit, irq = d->irq; irq_flow_handler_t handler = NULL; unsigned char *name = NULL; void __iomem *base; int ret; if (irq >= AU1000_INTC1_INT_BASE) { bit = irq - AU1000_INTC1_INT_BASE; chip = &au1x_ic1_chip; base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq - AU1000_INTC0_INT_BASE; chip = &au1x_ic0_chip; base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } if (bit > 31) return -EINVAL; ret = 0; switch (flow_type) { /* cfgregs 2:1:0 */ case IRQ_TYPE_EDGE_RISING: /* 0:0:1 */ __raw_writel(1 << bit, base + IC_CFG2CLR); __raw_writel(1 << bit, base + IC_CFG1CLR); __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "riseedge"; break; case IRQ_TYPE_EDGE_FALLING: /* 0:1:0 */ __raw_writel(1 << bit, base + IC_CFG2CLR); __raw_writel(1 << bit, base + IC_CFG1SET); __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_edge_irq; name = "falledge"; break; case IRQ_TYPE_EDGE_BOTH: /* 0:1:1 */ __raw_writel(1 << bit, base + IC_CFG2CLR); __raw_writel(1 << bit, base + IC_CFG1SET); __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_edge_irq; name = "bothedge"; break; case IRQ_TYPE_LEVEL_HIGH: /* 1:0:1 */ __raw_writel(1 << bit, base + IC_CFG2SET); __raw_writel(1 << bit, base + IC_CFG1CLR); __raw_writel(1 << bit, base + IC_CFG0SET); handler = handle_level_irq; name = "hilevel"; break; case IRQ_TYPE_LEVEL_LOW: /* 1:1:0 */ __raw_writel(1 << bit, base + IC_CFG2SET); __raw_writel(1 << bit, base + IC_CFG1SET); __raw_writel(1 << bit, base + IC_CFG0CLR); handler = handle_level_irq; name = "lowlevel"; break; case IRQ_TYPE_NONE: /* 0:0:0 */ __raw_writel(1 << bit, base + IC_CFG2CLR); __raw_writel(1 << bit, base + IC_CFG1CLR); __raw_writel(1 << bit, base + IC_CFG0CLR); break; default: ret = -EINVAL; } irq_set_chip_handler_name_locked(d, chip, handler, name); wmb(); return ret; } /******************************************************************************/ /* * au1300_gpic_chgcfg - change PIN configuration. * @gpio: pin to change (0-based GPIO number from datasheet). * @clr: clear all bits set in 'clr'. * @set: set these bits. * * modifies a pins' configuration register, bits set in @clr will * be cleared in the register, bits in @set will be set. */ static inline void au1300_gpic_chgcfg(unsigned int gpio, unsigned long clr, unsigned long set) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long l; r += gpio * 4; /* offset into pin config array */ l = __raw_readl(r + AU1300_GPIC_PINCFG); l &= ~clr; l |= set; __raw_writel(l, r + AU1300_GPIC_PINCFG); wmb(); } /* * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl). * @pin: pin (0-based GPIO number from datasheet). * * Assigns a GPIO pin to the GPIO controller, so its level can either * be read or set through the generic GPIO functions. * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1). * REVISIT: is this function really necessary? */ void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio) { au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE); } EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio); /* * au1300_pinfunc_to_dev - assign a pin to the device function. * @pin: pin (0-based GPIO number from datasheet). * * Assigns a GPIO pin to its associated device function; the pin will be * driven by the device and not through GPIO functions. */ void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long bit; r += GPIC_GPIO_BANKOFF(gpio); bit = GPIC_GPIO_TO_BIT(gpio); __raw_writel(bit, r + AU1300_GPIC_DEVSEL); wmb(); } EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev); /* * au1300_set_irq_priority - set internal priority of IRQ. * @irq: irq to set priority (linux irq number). * @p: priority (0 = highest, 3 = lowest). */ void au1300_set_irq_priority(unsigned int irq, int p) { irq -= ALCHEMY_GPIC_INT_BASE; au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p)); } EXPORT_SYMBOL_GPL(au1300_set_irq_priority); /* * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers. * @dchan: dbdma trigger select (0, 1). * @gpio: pin to assign as trigger. * * DBDMA controller has 2 external trigger sources; this function * assigns a GPIO to the selected trigger. */ void au1300_set_dbdma_gpio(int dchan, unsigned int gpio) { unsigned long r; if ((dchan >= 0) && (dchan <= 1)) { r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); r &= ~(0xff << (8 * dchan)); r |= (gpio & 0x7f) << (8 * dchan); __raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL); wmb(); } } static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow) { au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE, allow ? GPIC_CFG_IDLEWAKE : 0); } static void au1300_gpic_mask(struct irq_data *d) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long bit, irq = d->irq; irq -= ALCHEMY_GPIC_INT_BASE; r += GPIC_GPIO_BANKOFF(irq); bit = GPIC_GPIO_TO_BIT(irq); __raw_writel(bit, r + AU1300_GPIC_IDIS); wmb(); gpic_pin_set_idlewake(irq, 0); } static void au1300_gpic_unmask(struct irq_data *d) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long bit, irq = d->irq; irq -= ALCHEMY_GPIC_INT_BASE; gpic_pin_set_idlewake(irq, 1); r += GPIC_GPIO_BANKOFF(irq); bit = GPIC_GPIO_TO_BIT(irq); __raw_writel(bit, r + AU1300_GPIC_IEN); wmb(); } static void au1300_gpic_maskack(struct irq_data *d) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long bit, irq = d->irq; irq -= ALCHEMY_GPIC_INT_BASE; r += GPIC_GPIO_BANKOFF(irq); bit = GPIC_GPIO_TO_BIT(irq); __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ __raw_writel(bit, r + AU1300_GPIC_IDIS); /* mask */ wmb(); gpic_pin_set_idlewake(irq, 0); } static void au1300_gpic_ack(struct irq_data *d) { void __iomem *r = AU1300_GPIC_ADDR; unsigned long bit, irq = d->irq; irq -= ALCHEMY_GPIC_INT_BASE; r += GPIC_GPIO_BANKOFF(irq); bit = GPIC_GPIO_TO_BIT(irq); __raw_writel(bit, r + AU1300_GPIC_IPEND); /* ack */ wmb(); } static struct irq_chip au1300_gpic = { .name = "GPIOINT", .irq_ack = au1300_gpic_ack, .irq_mask = au1300_gpic_mask, .irq_mask_ack = au1300_gpic_maskack, .irq_unmask = au1300_gpic_unmask, .irq_set_type = au1300_gpic_settype, }; static int au1300_gpic_settype(struct irq_data *d, unsigned int type) { unsigned long s; unsigned char *name = NULL; irq_flow_handler_t hdl = NULL; switch (type) { case IRQ_TYPE_LEVEL_HIGH: s = GPIC_CFG_IC_LEVEL_HIGH; name = "high"; hdl = handle_level_irq; break; case IRQ_TYPE_LEVEL_LOW: s = GPIC_CFG_IC_LEVEL_LOW; name = "low"; hdl = handle_level_irq; break; case IRQ_TYPE_EDGE_RISING: s = GPIC_CFG_IC_EDGE_RISE; name = "posedge"; hdl = handle_edge_irq; break; case IRQ_TYPE_EDGE_FALLING: s = GPIC_CFG_IC_EDGE_FALL; name = "negedge"; hdl = handle_edge_irq; break; case IRQ_TYPE_EDGE_BOTH: s = GPIC_CFG_IC_EDGE_BOTH; name = "bothedge"; hdl = handle_edge_irq; break; case IRQ_TYPE_NONE: s = GPIC_CFG_IC_OFF; name = "disabled"; hdl = handle_level_irq; break; default: return -EINVAL; } irq_set_chip_handler_name_locked(d, &au1300_gpic, hdl, name); au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s); return 0; } /******************************************************************************/ static inline void ic_init(void __iomem *base) { /* initialize interrupt controller to a safe state */ __raw_writel(0xffffffff, base + IC_CFG0CLR); __raw_writel(0xffffffff, base + IC_CFG1CLR); __raw_writel(0xffffffff, base + IC_CFG2CLR); __raw_writel(0xffffffff, base + IC_MASKCLR); __raw_writel(0xffffffff, base + IC_ASSIGNCLR); __raw_writel(0xffffffff, base + IC_WAKECLR); __raw_writel(0xffffffff, base + IC_SRCSET); __raw_writel(0xffffffff, base + IC_FALLINGCLR); __raw_writel(0xffffffff, base + IC_RISINGCLR); __raw_writel(0x00000000, base + IC_TESTBIT); wmb(); } static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6]; static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d) { d[0] = __raw_readl(base + IC_CFG0RD); d[1] = __raw_readl(base + IC_CFG1RD); d[2] = __raw_readl(base + IC_CFG2RD); d[3] = __raw_readl(base + IC_SRCRD); d[4] = __raw_readl(base + IC_ASSIGNRD); d[5] = __raw_readl(base + IC_WAKERD); d[6] = __raw_readl(base + IC_MASKRD); ic_init(base); /* shut it up too while at it */ } static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d) { ic_init(base); __raw_writel(d[0], base + IC_CFG0SET); __raw_writel(d[1], base + IC_CFG1SET); __raw_writel(d[2], base + IC_CFG2SET); __raw_writel(d[3], base + IC_SRCSET); __raw_writel(d[4], base + IC_ASSIGNSET); __raw_writel(d[5], base + IC_WAKESET); wmb(); __raw_writel(d[6], base + IC_MASKSET); wmb(); } static int alchemy_ic_suspend(void) { alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), alchemy_gpic_pmdata); alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), &alchemy_gpic_pmdata[7]); return 0; } static void alchemy_ic_resume(void) { alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR), &alchemy_gpic_pmdata[7]); alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR), alchemy_gpic_pmdata); } static int alchemy_gpic_suspend(void) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); int i; /* save 4 interrupt mask status registers */ alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0); alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4); alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8); alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc); /* save misc register(s) */ alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL); /* molto silenzioso */ __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); wmb(); /* save pin/int-type configuration */ base += AU1300_GPIC_PINCFG; for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2)); wmb(); return 0; } static void alchemy_gpic_resume(void) { void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); int i; /* disable all first */ __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8); __raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc); wmb(); /* restore pin/int-type configurations */ base += AU1300_GPIC_PINCFG; for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++) __raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2)); wmb(); /* restore misc register(s) */ base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR); __raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL); wmb(); /* finally restore masks */ __raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0); __raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4); __raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8); __raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc); wmb(); } static struct syscore_ops alchemy_ic_pmops = { .suspend = alchemy_ic_suspend, .resume = alchemy_ic_resume, }; static struct syscore_ops alchemy_gpic_pmops = { .suspend = alchemy_gpic_suspend, .resume = alchemy_gpic_resume, }; /******************************************************************************/ /* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */ #define DISP(name, base, addr) \ static void au1000_##name##_dispatch(struct irq_desc *d) \ { \ unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr)); \ if (likely(r)) \ generic_handle_irq(base + __ffs(r)); \ else \ spurious_interrupt(); \ } DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT) DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT) DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT) DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT) static void alchemy_gpic_dispatch(struct irq_desc *d) { int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC); generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i); } /******************************************************************************/ static void __init au1000_init_irq(struct alchemy_irqmap *map) { unsigned int bit, irq_nr; void __iomem *base; ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR)); ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR)); register_syscore_ops(&alchemy_ic_pmops); mips_cpu_irq_init(); /* register all 64 possible IC0+IC1 irq sources as type "none". * Use set_irq_type() to set edge/level behaviour at runtime. */ for (irq_nr = AU1000_INTC0_INT_BASE; (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++) au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); for (irq_nr = AU1000_INTC1_INT_BASE; (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++) au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE); /* * Initialize IC0, which is fixed per processor. */ while (map->irq != -1) { irq_nr = map->irq; if (irq_nr >= AU1000_INTC1_INT_BASE) { bit = irq_nr - AU1000_INTC1_INT_BASE; base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR); } else { bit = irq_nr - AU1000_INTC0_INT_BASE; base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR); } if (map->prio == 0) __raw_writel(1 << bit, base + IC_ASSIGNSET); au1x_ic_settype(irq_get_irq_data(irq_nr), map->type); ++map; } irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch); } static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints) { int i; void __iomem *bank_base; register_syscore_ops(&alchemy_gpic_pmops); mips_cpu_irq_init(); /* disable & ack all possible interrupt sources */ for (i = 0; i < 4; i++) { bank_base = AU1300_GPIC_ADDR + (i * 4); __raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS); wmb(); __raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND); wmb(); } /* register an irq_chip for them, with 2nd highest priority */ for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) { au1300_set_irq_priority(i, 1); au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE); } /* setup known on-chip sources */ while ((i = dints->irq) != -1) { au1300_gpic_settype(irq_get_irq_data(i), dints->type); au1300_set_irq_priority(i, dints->prio); if (dints->internal) au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE); dints++; } irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch); irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch); } /******************************************************************************/ void __init arch_init_irq(void) { switch (alchemy_get_cputype()) { case ALCHEMY_CPU_AU1000: au1000_init_irq(au1000_irqmap); break; case ALCHEMY_CPU_AU1500: au1000_init_irq(au1500_irqmap); break; case ALCHEMY_CPU_AU1100: au1000_init_irq(au1100_irqmap); break; case ALCHEMY_CPU_AU1550: au1000_init_irq(au1550_irqmap); break; case ALCHEMY_CPU_AU1200: au1000_init_irq(au1200_irqmap); break; case ALCHEMY_CPU_AU1300: alchemy_gpic_init_irq(au1300_irqmap); break; default: pr_err("unknown Alchemy IRQ core\n"); break; } } asmlinkage void plat_irq_dispatch(void) { unsigned long r = (read_c0_status() & read_c0_cause()) >> 8; do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff)); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1