Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Scott Wood | 386 | 98.22% | 2 | 50.00% |
Alessio Igor Bogani | 5 | 1.27% | 1 | 25.00% |
Thomas Gleixner | 2 | 0.51% | 1 | 25.00% |
Total | 393 | 4 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * This interface is used for compatibility with old U-boots *ONLY*. * Please do not imitate or extend this. */ /* * (C) Copyright 2000, 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. */ #ifndef __PPCBOOT_H__ #define __PPCBOOT_H__ /* * Board information passed to kernel from PPCBoot * * include/asm-ppc/ppcboot.h */ #include "types.h" typedef struct bd_info { unsigned long bi_memstart; /* start of DRAM memory */ unsigned long bi_memsize; /* size of DRAM memory in bytes */ unsigned long bi_flashstart; /* start of FLASH memory */ unsigned long bi_flashsize; /* size of FLASH memory */ unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ #if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ defined(TARGET_83xx) || defined(TARGET_86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif #if defined(TARGET_PPC_MPC52xx) unsigned long bi_mbar_base; /* base of internal registers */ #endif unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ unsigned long bi_ip_addr; /* IP Address */ unsigned char bi_enetaddr[6]; /* Ethernet address */ unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ #if defined(TARGET_CPM2) unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ unsigned long bi_vco; /* VCO Out from PLL, in MHz */ #endif #if defined(TARGET_PPC_MPC52xx) unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif unsigned long bi_baudrate; /* Console Baudrate */ #if defined(TARGET_4xx) unsigned char bi_s_version[4]; /* Version of this structure */ unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ #endif #if defined(TARGET_HYMOD) hymod_conf_t bi_hymod_conf; /* hymod configuration information */ #endif #if defined(TARGET_EVB64260) || defined(TARGET_44x) || \ defined(TARGET_85xx) || defined(TARGET_83xx) || defined(TARGET_HAS_ETH1) /* second onboard ethernet port */ unsigned char bi_enet1addr[6]; #define HAVE_ENET1ADDR #endif #if defined(TARGET_EVB64260) || defined(TARGET_440GX) || \ defined(TARGET_85xx) || defined(TARGET_HAS_ETH2) /* third onboard ethernet ports */ unsigned char bi_enet2addr[6]; #define HAVE_ENET2ADDR #endif #if defined(TARGET_440GX) || defined(TARGET_HAS_ETH3) /* fourth onboard ethernet ports */ unsigned char bi_enet3addr[6]; #define HAVE_ENET3ADDR #endif #if defined(TARGET_4xx) unsigned int bi_opbfreq; /* OB clock in Hz */ int bi_iic_fast[2]; /* Use fast i2c mode */ #endif #if defined(TARGET_440GX) int bi_phynum[4]; /* phy mapping */ int bi_phymode[4]; /* phy mode */ #endif } bd_t; #define bi_tbfreq bi_intfreq #endif /* __PPCBOOT_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1