Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Jeremy Kerr | 2086 | 46.39% | 3 | 3.23% |
Michael Ellerman | 1344 | 29.89% | 25 | 26.88% |
Arnd Bergmann | 277 | 6.16% | 1 | 1.08% |
Jens Osterkamp | 263 | 5.85% | 1 | 1.08% |
Christoph Hellwig | 133 | 2.96% | 6 | 6.45% |
Mark Nelson | 100 | 2.22% | 4 | 4.30% |
Benjamin Herrenschmidt | 63 | 1.40% | 7 | 7.53% |
Alexey Kardashevskiy | 38 | 0.85% | 3 | 3.23% |
Alistair Popple | 24 | 0.53% | 2 | 2.15% |
Geert Uytterhoeven | 22 | 0.49% | 1 | 1.08% |
Anton Blanchard | 15 | 0.33% | 4 | 4.30% |
Liang He | 12 | 0.27% | 1 | 1.08% |
Julia Lawall | 11 | 0.24% | 3 | 3.23% |
Paul Mackerras | 9 | 0.20% | 1 | 1.08% |
Grant C. Likely | 8 | 0.18% | 3 | 3.23% |
Daniel Axtens | 8 | 0.18% | 1 | 1.08% |
Stephen Rothwell | 8 | 0.18% | 2 | 2.15% |
Andrew Morton | 7 | 0.16% | 2 | 2.15% |
Nick Child | 7 | 0.16% | 1 | 1.08% |
Krzysztof Kozlowski | 6 | 0.13% | 1 | 1.08% |
Becky Bruce | 6 | 0.13% | 1 | 1.08% |
Rob Herring | 6 | 0.13% | 2 | 2.15% |
Christophe Leroy | 6 | 0.13% | 2 | 2.15% |
David S. Miller | 5 | 0.11% | 1 | 1.08% |
Yinghai Lu | 5 | 0.11% | 1 | 1.08% |
Robert Jennings | 4 | 0.09% | 1 | 1.08% |
Al Viro | 4 | 0.09% | 2 | 2.15% |
Harvey Harrison | 4 | 0.09% | 1 | 1.08% |
Ishizaki Kou | 3 | 0.07% | 1 | 1.08% |
Ingo Molnar | 3 | 0.07% | 2 | 2.15% |
Linus Torvalds (pre-git) | 2 | 0.04% | 1 | 1.08% |
Gerhard Pircher | 2 | 0.04% | 1 | 1.08% |
Thomas Gleixner | 2 | 0.04% | 1 | 1.08% |
Yong Zhang | 1 | 0.02% | 1 | 1.08% |
Denis Kirjanov | 1 | 0.02% | 1 | 1.08% |
Linus Torvalds | 1 | 0.02% | 1 | 1.08% |
Adam Buchbinder | 1 | 0.02% | 1 | 1.08% |
Total | 4497 | 93 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * IOMMU implementation for Cell Broadband Processor Architecture * * (C) Copyright IBM Corporation 2006-2008 * * Author: Jeremy Kerr <jk@ozlabs.org> */ #undef DEBUG #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irqdomain.h> #include <linux/notifier.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/memblock.h> #include <asm/prom.h> #include <asm/iommu.h> #include <asm/machdep.h> #include <asm/pci-bridge.h> #include <asm/udbg.h> #include <asm/firmware.h> #include <asm/cell-regs.h> #include "cell.h" #include "interrupt.h" /* Define CELL_IOMMU_REAL_UNMAP to actually unmap non-used pages * instead of leaving them mapped to some dummy page. This can be * enabled once the appropriate workarounds for spider bugs have * been enabled */ #define CELL_IOMMU_REAL_UNMAP /* Define CELL_IOMMU_STRICT_PROTECTION to enforce protection of * IO PTEs based on the transfer direction. That can be enabled * once spider-net has been fixed to pass the correct direction * to the DMA mapping functions */ #define CELL_IOMMU_STRICT_PROTECTION #define NR_IOMMUS 2 /* IOC mmap registers */ #define IOC_Reg_Size 0x2000 #define IOC_IOPT_CacheInvd 0x908 #define IOC_IOPT_CacheInvd_NE_Mask 0xffe0000000000000ul #define IOC_IOPT_CacheInvd_IOPTE_Mask 0x000003fffffffff8ul #define IOC_IOPT_CacheInvd_Busy 0x0000000000000001ul #define IOC_IOST_Origin 0x918 #define IOC_IOST_Origin_E 0x8000000000000000ul #define IOC_IOST_Origin_HW 0x0000000000000800ul #define IOC_IOST_Origin_HL 0x0000000000000400ul #define IOC_IO_ExcpStat 0x920 #define IOC_IO_ExcpStat_V 0x8000000000000000ul #define IOC_IO_ExcpStat_SPF_Mask 0x6000000000000000ul #define IOC_IO_ExcpStat_SPF_S 0x6000000000000000ul #define IOC_IO_ExcpStat_SPF_P 0x2000000000000000ul #define IOC_IO_ExcpStat_ADDR_Mask 0x00000007fffff000ul #define IOC_IO_ExcpStat_RW_Mask 0x0000000000000800ul #define IOC_IO_ExcpStat_IOID_Mask 0x00000000000007fful #define IOC_IO_ExcpMask 0x928 #define IOC_IO_ExcpMask_SFE 0x4000000000000000ul #define IOC_IO_ExcpMask_PFE 0x2000000000000000ul #define IOC_IOCmd_Offset 0x1000 #define IOC_IOCmd_Cfg 0xc00 #define IOC_IOCmd_Cfg_TE 0x0000800000000000ul /* Segment table entries */ #define IOSTE_V 0x8000000000000000ul /* valid */ #define IOSTE_H 0x4000000000000000ul /* cache hint */ #define IOSTE_PT_Base_RPN_Mask 0x3ffffffffffff000ul /* base RPN of IOPT */ #define IOSTE_NPPT_Mask 0x0000000000000fe0ul /* no. pages in IOPT */ #define IOSTE_PS_Mask 0x0000000000000007ul /* page size */ #define IOSTE_PS_4K 0x0000000000000001ul /* - 4kB */ #define IOSTE_PS_64K 0x0000000000000003ul /* - 64kB */ #define IOSTE_PS_1M 0x0000000000000005ul /* - 1MB */ #define IOSTE_PS_16M 0x0000000000000007ul /* - 16MB */ /* IOMMU sizing */ #define IO_SEGMENT_SHIFT 28 #define IO_PAGENO_BITS(shift) (IO_SEGMENT_SHIFT - (shift)) /* The high bit needs to be set on every DMA address */ #define SPIDER_DMA_OFFSET 0x80000000ul struct iommu_window { struct list_head list; struct cbe_iommu *iommu; unsigned long offset; unsigned long size; unsigned int ioid; struct iommu_table table; }; #define NAMESIZE 8 struct cbe_iommu { int nid; char name[NAMESIZE]; void __iomem *xlate_regs; void __iomem *cmd_regs; unsigned long *stab; unsigned long *ptab; void *pad_page; struct list_head windows; }; /* Static array of iommus, one per node * each contains a list of windows, keyed from dma_window property * - on bus setup, look for a matching window, or create one * - on dev setup, assign iommu_table ptr */ static struct cbe_iommu iommus[NR_IOMMUS]; static int cbe_nr_iommus; static void invalidate_tce_cache(struct cbe_iommu *iommu, unsigned long *pte, long n_ptes) { u64 __iomem *reg; u64 val; long n; reg = iommu->xlate_regs + IOC_IOPT_CacheInvd; while (n_ptes > 0) { /* we can invalidate up to 1 << 11 PTEs at once */ n = min(n_ptes, 1l << 11); val = (((n /*- 1*/) << 53) & IOC_IOPT_CacheInvd_NE_Mask) | (__pa(pte) & IOC_IOPT_CacheInvd_IOPTE_Mask) | IOC_IOPT_CacheInvd_Busy; out_be64(reg, val); while (in_be64(reg) & IOC_IOPT_CacheInvd_Busy) ; n_ptes -= n; pte += n; } } static int tce_build_cell(struct iommu_table *tbl, long index, long npages, unsigned long uaddr, enum dma_data_direction direction, unsigned long attrs) { int i; unsigned long *io_pte, base_pte; struct iommu_window *window = container_of(tbl, struct iommu_window, table); /* implementing proper protection causes problems with the spidernet * driver - check mapping directions later, but allow read & write by * default for now.*/ #ifdef CELL_IOMMU_STRICT_PROTECTION /* to avoid referencing a global, we use a trick here to setup the * protection bit. "prot" is setup to be 3 fields of 4 bits appended * together for each of the 3 supported direction values. It is then * shifted left so that the fields matching the desired direction * lands on the appropriate bits, and other bits are masked out. */ const unsigned long prot = 0xc48; base_pte = ((prot << (52 + 4 * direction)) & (CBE_IOPTE_PP_W | CBE_IOPTE_PP_R)) | CBE_IOPTE_M | CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask); #else base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW | (window->ioid & CBE_IOPTE_IOID_Mask); #endif if (unlikely(attrs & DMA_ATTR_WEAK_ORDERING)) base_pte &= ~CBE_IOPTE_SO_RW; io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++, uaddr += (1 << tbl->it_page_shift)) io_pte[i] = base_pte | (__pa(uaddr) & CBE_IOPTE_RPN_Mask); mb(); invalidate_tce_cache(window->iommu, io_pte, npages); pr_debug("tce_build_cell(index=%lx,n=%lx,dir=%d,base_pte=%lx)\n", index, npages, direction, base_pte); return 0; } static void tce_free_cell(struct iommu_table *tbl, long index, long npages) { int i; unsigned long *io_pte, pte; struct iommu_window *window = container_of(tbl, struct iommu_window, table); pr_debug("tce_free_cell(index=%lx,n=%lx)\n", index, npages); #ifdef CELL_IOMMU_REAL_UNMAP pte = 0; #else /* spider bridge does PCI reads after freeing - insert a mapping * to a scratch page instead of an invalid entry */ pte = CBE_IOPTE_PP_R | CBE_IOPTE_M | CBE_IOPTE_SO_RW | __pa(window->iommu->pad_page) | (window->ioid & CBE_IOPTE_IOID_Mask); #endif io_pte = (unsigned long *)tbl->it_base + (index - tbl->it_offset); for (i = 0; i < npages; i++) io_pte[i] = pte; mb(); invalidate_tce_cache(window->iommu, io_pte, npages); } static irqreturn_t ioc_interrupt(int irq, void *data) { unsigned long stat, spf; struct cbe_iommu *iommu = data; stat = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); spf = stat & IOC_IO_ExcpStat_SPF_Mask; /* Might want to rate limit it */ printk(KERN_ERR "iommu: DMA exception 0x%016lx\n", stat); printk(KERN_ERR " V=%d, SPF=[%c%c], RW=%s, IOID=0x%04x\n", !!(stat & IOC_IO_ExcpStat_V), (spf == IOC_IO_ExcpStat_SPF_S) ? 'S' : ' ', (spf == IOC_IO_ExcpStat_SPF_P) ? 'P' : ' ', (stat & IOC_IO_ExcpStat_RW_Mask) ? "Read" : "Write", (unsigned int)(stat & IOC_IO_ExcpStat_IOID_Mask)); printk(KERN_ERR " page=0x%016lx\n", stat & IOC_IO_ExcpStat_ADDR_Mask); /* clear interrupt */ stat &= ~IOC_IO_ExcpStat_V; out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, stat); return IRQ_HANDLED; } static int __init cell_iommu_find_ioc(int nid, unsigned long *base) { struct device_node *np; struct resource r; *base = 0; /* First look for new style /be nodes */ for_each_node_by_name(np, "ioc") { if (of_node_to_nid(np) != nid) continue; if (of_address_to_resource(np, 0, &r)) { printk(KERN_ERR "iommu: can't get address for %pOF\n", np); continue; } *base = r.start; of_node_put(np); return 0; } /* Ok, let's try the old way */ for_each_node_by_type(np, "cpu") { const unsigned int *nidp; const unsigned long *tmp; nidp = of_get_property(np, "node-id", NULL); if (nidp && *nidp == nid) { tmp = of_get_property(np, "ioc-translation", NULL); if (tmp) { *base = *tmp; of_node_put(np); return 0; } } } return -ENODEV; } static void __init cell_iommu_setup_stab(struct cbe_iommu *iommu, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { struct page *page; unsigned long segments, stab_size; segments = max(dbase + dsize, fbase + fsize) >> IO_SEGMENT_SHIFT; pr_debug("%s: iommu[%d]: segments: %lu\n", __func__, iommu->nid, segments); /* set up the segment table */ stab_size = segments * sizeof(unsigned long); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(stab_size)); BUG_ON(!page); iommu->stab = page_address(page); memset(iommu->stab, 0, stab_size); } static unsigned long *__init cell_iommu_alloc_ptab(struct cbe_iommu *iommu, unsigned long base, unsigned long size, unsigned long gap_base, unsigned long gap_size, unsigned long page_shift) { struct page *page; int i; unsigned long reg, segments, pages_per_segment, ptab_size, n_pte_pages, start_seg, *ptab; start_seg = base >> IO_SEGMENT_SHIFT; segments = size >> IO_SEGMENT_SHIFT; pages_per_segment = 1ull << IO_PAGENO_BITS(page_shift); /* PTEs for each segment must start on a 4K boundary */ pages_per_segment = max(pages_per_segment, (1 << 12) / sizeof(unsigned long)); ptab_size = segments * pages_per_segment * sizeof(unsigned long); pr_debug("%s: iommu[%d]: ptab_size: %lu, order: %d\n", __func__, iommu->nid, ptab_size, get_order(ptab_size)); page = alloc_pages_node(iommu->nid, GFP_KERNEL, get_order(ptab_size)); BUG_ON(!page); ptab = page_address(page); memset(ptab, 0, ptab_size); /* number of 4K pages needed for a page table */ n_pte_pages = (pages_per_segment * sizeof(unsigned long)) >> 12; pr_debug("%s: iommu[%d]: stab at %p, ptab at %p, n_pte_pages: %lu\n", __func__, iommu->nid, iommu->stab, ptab, n_pte_pages); /* initialise the STEs */ reg = IOSTE_V | ((n_pte_pages - 1) << 5); switch (page_shift) { case 12: reg |= IOSTE_PS_4K; break; case 16: reg |= IOSTE_PS_64K; break; case 20: reg |= IOSTE_PS_1M; break; case 24: reg |= IOSTE_PS_16M; break; default: BUG(); } gap_base = gap_base >> IO_SEGMENT_SHIFT; gap_size = gap_size >> IO_SEGMENT_SHIFT; pr_debug("Setting up IOMMU stab:\n"); for (i = start_seg; i < (start_seg + segments); i++) { if (i >= gap_base && i < (gap_base + gap_size)) { pr_debug("\toverlap at %d, skipping\n", i); continue; } iommu->stab[i] = reg | (__pa(ptab) + (n_pte_pages << 12) * (i - start_seg)); pr_debug("\t[%d] 0x%016lx\n", i, iommu->stab[i]); } return ptab; } static void __init cell_iommu_enable_hardware(struct cbe_iommu *iommu) { int ret; unsigned long reg, xlate_base; unsigned int virq; if (cell_iommu_find_ioc(iommu->nid, &xlate_base)) panic("%s: missing IOC register mappings for node %d\n", __func__, iommu->nid); iommu->xlate_regs = ioremap(xlate_base, IOC_Reg_Size); iommu->cmd_regs = iommu->xlate_regs + IOC_IOCmd_Offset; /* ensure that the STEs have updated */ mb(); /* setup interrupts for the iommu. */ reg = in_be64(iommu->xlate_regs + IOC_IO_ExcpStat); out_be64(iommu->xlate_regs + IOC_IO_ExcpStat, reg & ~IOC_IO_ExcpStat_V); out_be64(iommu->xlate_regs + IOC_IO_ExcpMask, IOC_IO_ExcpMask_PFE | IOC_IO_ExcpMask_SFE); virq = irq_create_mapping(NULL, IIC_IRQ_IOEX_ATI | (iommu->nid << IIC_IRQ_NODE_SHIFT)); BUG_ON(!virq); ret = request_irq(virq, ioc_interrupt, 0, iommu->name, iommu); BUG_ON(ret); /* set the IOC segment table origin register (and turn on the iommu) */ reg = IOC_IOST_Origin_E | __pa(iommu->stab) | IOC_IOST_Origin_HW; out_be64(iommu->xlate_regs + IOC_IOST_Origin, reg); in_be64(iommu->xlate_regs + IOC_IOST_Origin); /* turn on IO translation */ reg = in_be64(iommu->cmd_regs + IOC_IOCmd_Cfg) | IOC_IOCmd_Cfg_TE; out_be64(iommu->cmd_regs + IOC_IOCmd_Cfg, reg); } static void __init cell_iommu_setup_hardware(struct cbe_iommu *iommu, unsigned long base, unsigned long size) { cell_iommu_setup_stab(iommu, base, size, 0, 0); iommu->ptab = cell_iommu_alloc_ptab(iommu, base, size, 0, 0, IOMMU_PAGE_SHIFT_4K); cell_iommu_enable_hardware(iommu); } static inline u32 cell_iommu_get_ioid(struct device_node *np) { const u32 *ioid; ioid = of_get_property(np, "ioid", NULL); if (ioid == NULL) { printk(KERN_WARNING "iommu: missing ioid for %pOF using 0\n", np); return 0; } return *ioid; } static struct iommu_table_ops cell_iommu_ops = { .set = tce_build_cell, .clear = tce_free_cell }; static struct iommu_window * __init cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, unsigned long offset, unsigned long size, unsigned long pte_offset) { struct iommu_window *window; struct page *page; u32 ioid; ioid = cell_iommu_get_ioid(np); window = kzalloc_node(sizeof(*window), GFP_KERNEL, iommu->nid); BUG_ON(window == NULL); window->offset = offset; window->size = size; window->ioid = ioid; window->iommu = iommu; window->table.it_blocksize = 16; window->table.it_base = (unsigned long)iommu->ptab; window->table.it_index = iommu->nid; window->table.it_page_shift = IOMMU_PAGE_SHIFT_4K; window->table.it_offset = (offset >> window->table.it_page_shift) + pte_offset; window->table.it_size = size >> window->table.it_page_shift; window->table.it_ops = &cell_iommu_ops; if (!iommu_init_table(&window->table, iommu->nid, 0, 0)) panic("Failed to initialize iommu table"); pr_debug("\tioid %d\n", window->ioid); pr_debug("\tblocksize %ld\n", window->table.it_blocksize); pr_debug("\tbase 0x%016lx\n", window->table.it_base); pr_debug("\toffset 0x%lx\n", window->table.it_offset); pr_debug("\tsize %ld\n", window->table.it_size); list_add(&window->list, &iommu->windows); if (offset != 0) return window; /* We need to map and reserve the first IOMMU page since it's used * by the spider workaround. In theory, we only need to do that when * running on spider but it doesn't really matter. * * This code also assumes that we have a window that starts at 0, * which is the case on all spider based blades. */ page = alloc_pages_node(iommu->nid, GFP_KERNEL, 0); BUG_ON(!page); iommu->pad_page = page_address(page); clear_page(iommu->pad_page); __set_bit(0, window->table.it_map); tce_build_cell(&window->table, window->table.it_offset, 1, (unsigned long)iommu->pad_page, DMA_TO_DEVICE, 0); return window; } static struct cbe_iommu *cell_iommu_for_node(int nid) { int i; for (i = 0; i < cbe_nr_iommus; i++) if (iommus[i].nid == nid) return &iommus[i]; return NULL; } static unsigned long cell_dma_nommu_offset; static unsigned long dma_iommu_fixed_base; static bool cell_iommu_enabled; /* iommu_fixed_is_weak is set if booted with iommu_fixed=weak */ bool iommu_fixed_is_weak; static struct iommu_table *cell_get_iommu_table(struct device *dev) { struct iommu_window *window; struct cbe_iommu *iommu; /* Current implementation uses the first window available in that * node's iommu. We -might- do something smarter later though it may * never be necessary */ iommu = cell_iommu_for_node(dev_to_node(dev)); if (iommu == NULL || list_empty(&iommu->windows)) { dev_err(dev, "iommu: missing iommu for %pOF (node %d)\n", dev->of_node, dev_to_node(dev)); return NULL; } window = list_entry(iommu->windows.next, struct iommu_window, list); return &window->table; } static u64 cell_iommu_get_fixed_address(struct device *dev); static void cell_dma_dev_setup(struct device *dev) { if (cell_iommu_enabled) { u64 addr = cell_iommu_get_fixed_address(dev); if (addr != OF_BAD_ADDR) dev->archdata.dma_offset = addr + dma_iommu_fixed_base; set_iommu_table_base(dev, cell_get_iommu_table(dev)); } else { dev->archdata.dma_offset = cell_dma_nommu_offset; } } static void cell_pci_dma_dev_setup(struct pci_dev *dev) { cell_dma_dev_setup(&dev->dev); } static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, void *data) { struct device *dev = data; /* We are only interested in device addition */ if (action != BUS_NOTIFY_ADD_DEVICE) return 0; if (cell_iommu_enabled) dev->dma_ops = &dma_iommu_ops; cell_dma_dev_setup(dev); return 0; } static struct notifier_block cell_of_bus_notifier = { .notifier_call = cell_of_bus_notify }; static int __init cell_iommu_get_window(struct device_node *np, unsigned long *base, unsigned long *size) { const __be32 *dma_window; unsigned long index; /* Use ibm,dma-window if available, else, hard code ! */ dma_window = of_get_property(np, "ibm,dma-window", NULL); if (dma_window == NULL) { *base = 0; *size = 0x80000000u; return -ENODEV; } of_parse_dma_window(np, dma_window, &index, base, size); return 0; } static struct cbe_iommu * __init cell_iommu_alloc(struct device_node *np) { struct cbe_iommu *iommu; int nid, i; /* Get node ID */ nid = of_node_to_nid(np); if (nid < 0) { printk(KERN_ERR "iommu: failed to get node for %pOF\n", np); return NULL; } pr_debug("iommu: setting up iommu for node %d (%pOF)\n", nid, np); /* XXX todo: If we can have multiple windows on the same IOMMU, which * isn't the case today, we probably want here to check whether the * iommu for that node is already setup. * However, there might be issue with getting the size right so let's * ignore that for now. We might want to completely get rid of the * multiple window support since the cell iommu supports per-page ioids */ if (cbe_nr_iommus >= NR_IOMMUS) { printk(KERN_ERR "iommu: too many IOMMUs detected ! (%pOF)\n", np); return NULL; } /* Init base fields */ i = cbe_nr_iommus++; iommu = &iommus[i]; iommu->stab = NULL; iommu->nid = nid; snprintf(iommu->name, sizeof(iommu->name), "iommu%d", i); INIT_LIST_HEAD(&iommu->windows); return iommu; } static void __init cell_iommu_init_one(struct device_node *np, unsigned long offset) { struct cbe_iommu *iommu; unsigned long base, size; iommu = cell_iommu_alloc(np); if (!iommu) return; /* Obtain a window for it */ cell_iommu_get_window(np, &base, &size); pr_debug("\ttranslating window 0x%lx...0x%lx\n", base, base + size - 1); /* Initialize the hardware */ cell_iommu_setup_hardware(iommu, base, size); /* Setup the iommu_table */ cell_iommu_setup_window(iommu, np, base, size, offset >> IOMMU_PAGE_SHIFT_4K); } static void __init cell_disable_iommus(void) { int node; unsigned long base, val; void __iomem *xregs, *cregs; /* Make sure IOC translation is disabled on all nodes */ for_each_online_node(node) { if (cell_iommu_find_ioc(node, &base)) continue; xregs = ioremap(base, IOC_Reg_Size); if (xregs == NULL) continue; cregs = xregs + IOC_IOCmd_Offset; pr_debug("iommu: cleaning up iommu on node %d\n", node); out_be64(xregs + IOC_IOST_Origin, 0); (void)in_be64(xregs + IOC_IOST_Origin); val = in_be64(cregs + IOC_IOCmd_Cfg); val &= ~IOC_IOCmd_Cfg_TE; out_be64(cregs + IOC_IOCmd_Cfg, val); (void)in_be64(cregs + IOC_IOCmd_Cfg); iounmap(xregs); } } static int __init cell_iommu_init_disabled(void) { struct device_node *np = NULL; unsigned long base = 0, size; /* When no iommu is present, we use direct DMA ops */ /* First make sure all IOC translation is turned off */ cell_disable_iommus(); /* If we have no Axon, we set up the spider DMA magic offset */ np = of_find_node_by_name(NULL, "axon"); if (!np) cell_dma_nommu_offset = SPIDER_DMA_OFFSET; of_node_put(np); /* Now we need to check to see where the memory is mapped * in PCI space. We assume that all busses use the same dma * window which is always the case so far on Cell, thus we * pick up the first pci-internal node we can find and check * the DMA window from there. */ for_each_node_by_name(np, "axon") { if (np->parent == NULL || np->parent->parent != NULL) continue; if (cell_iommu_get_window(np, &base, &size) == 0) break; } if (np == NULL) { for_each_node_by_name(np, "pci-internal") { if (np->parent == NULL || np->parent->parent != NULL) continue; if (cell_iommu_get_window(np, &base, &size) == 0) break; } } of_node_put(np); /* If we found a DMA window, we check if it's big enough to enclose * all of physical memory. If not, we force enable IOMMU */ if (np && size < memblock_end_of_DRAM()) { printk(KERN_WARNING "iommu: force-enabled, dma window" " (%ldMB) smaller than total memory (%lldMB)\n", size >> 20, memblock_end_of_DRAM() >> 20); return -ENODEV; } cell_dma_nommu_offset += base; if (cell_dma_nommu_offset != 0) cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; printk("iommu: disabled, direct DMA offset is 0x%lx\n", cell_dma_nommu_offset); return 0; } /* * Fixed IOMMU mapping support * * This code adds support for setting up a fixed IOMMU mapping on certain * cell machines. For 64-bit devices this avoids the performance overhead of * mapping and unmapping pages at runtime. 32-bit devices are unable to use * the fixed mapping. * * The fixed mapping is established at boot, and maps all of physical memory * 1:1 into device space at some offset. On machines with < 30 GB of memory * we setup the fixed mapping immediately above the normal IOMMU window. * * For example a machine with 4GB of memory would end up with the normal * IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In * this case a 64-bit device wishing to DMA to 1GB would be told to DMA to * 3GB, plus any offset required by firmware. The firmware offset is encoded * in the "dma-ranges" property. * * On machines with 30GB or more of memory, we are unable to place the fixed * mapping above the normal IOMMU window as we would run out of address space. * Instead we move the normal IOMMU window to coincide with the hash page * table, this region does not need to be part of the fixed mapping as no * device should ever be DMA'ing to it. We then setup the fixed mapping * from 0 to 32GB. */ static u64 cell_iommu_get_fixed_address(struct device *dev) { u64 cpu_addr, size, best_size, dev_addr = OF_BAD_ADDR; struct device_node *np; const u32 *ranges = NULL; int i, len, best, naddr, nsize, pna, range_size; /* We can be called for platform devices that have no of_node */ np = of_node_get(dev->of_node); if (!np) goto out; while (1) { naddr = of_n_addr_cells(np); nsize = of_n_size_cells(np); np = of_get_next_parent(np); if (!np) break; ranges = of_get_property(np, "dma-ranges", &len); /* Ignore empty ranges, they imply no translation required */ if (ranges && len > 0) break; } if (!ranges) { dev_dbg(dev, "iommu: no dma-ranges found\n"); goto out; } len /= sizeof(u32); pna = of_n_addr_cells(np); range_size = naddr + nsize + pna; /* dma-ranges format: * child addr : naddr cells * parent addr : pna cells * size : nsize cells */ for (i = 0, best = -1, best_size = 0; i < len; i += range_size) { cpu_addr = of_translate_dma_address(np, ranges + i + naddr); size = of_read_number(ranges + i + naddr + pna, nsize); if (cpu_addr == 0 && size > best_size) { best = i; best_size = size; } } if (best >= 0) { dev_addr = of_read_number(ranges + best, naddr); } else dev_dbg(dev, "iommu: no suitable range found!\n"); out: of_node_put(np); return dev_addr; } static bool cell_pci_iommu_bypass_supported(struct pci_dev *pdev, u64 mask) { return mask == DMA_BIT_MASK(64) && cell_iommu_get_fixed_address(&pdev->dev) != OF_BAD_ADDR; } static void __init insert_16M_pte(unsigned long addr, unsigned long *ptab, unsigned long base_pte) { unsigned long segment, offset; segment = addr >> IO_SEGMENT_SHIFT; offset = (addr >> 24) - (segment << IO_PAGENO_BITS(24)); ptab = ptab + (segment * (1 << 12) / sizeof(unsigned long)); pr_debug("iommu: addr %lx ptab %p segment %lx offset %lx\n", addr, ptab, segment, offset); ptab[offset] = base_pte | (__pa(addr) & CBE_IOPTE_RPN_Mask); } static void __init cell_iommu_setup_fixed_ptab(struct cbe_iommu *iommu, struct device_node *np, unsigned long dbase, unsigned long dsize, unsigned long fbase, unsigned long fsize) { unsigned long base_pte, uaddr, ioaddr, *ptab; ptab = cell_iommu_alloc_ptab(iommu, fbase, fsize, dbase, dsize, 24); dma_iommu_fixed_base = fbase; pr_debug("iommu: mapping 0x%lx pages from 0x%lx\n", fsize, fbase); base_pte = CBE_IOPTE_PP_W | CBE_IOPTE_PP_R | CBE_IOPTE_M | (cell_iommu_get_ioid(np) & CBE_IOPTE_IOID_Mask); if (iommu_fixed_is_weak) pr_info("IOMMU: Using weak ordering for fixed mapping\n"); else { pr_info("IOMMU: Using strong ordering for fixed mapping\n"); base_pte |= CBE_IOPTE_SO_RW; } for (uaddr = 0; uaddr < fsize; uaddr += (1 << 24)) { /* Don't touch the dynamic region */ ioaddr = uaddr + fbase; if (ioaddr >= dbase && ioaddr < (dbase + dsize)) { pr_debug("iommu: fixed/dynamic overlap, skipping\n"); continue; } insert_16M_pte(uaddr, ptab, base_pte); } mb(); } static int __init cell_iommu_fixed_mapping_init(void) { unsigned long dbase, dsize, fbase, fsize, hbase, hend; struct cbe_iommu *iommu; struct device_node *np; /* The fixed mapping is only supported on axon machines */ np = of_find_node_by_name(NULL, "axon"); of_node_put(np); if (!np) { pr_debug("iommu: fixed mapping disabled, no axons found\n"); return -1; } /* We must have dma-ranges properties for fixed mapping to work */ np = of_find_node_with_property(NULL, "dma-ranges"); of_node_put(np); if (!np) { pr_debug("iommu: no dma-ranges found, no fixed mapping\n"); return -1; } /* The default setup is to have the fixed mapping sit after the * dynamic region, so find the top of the largest IOMMU window * on any axon, then add the size of RAM and that's our max value. * If that is > 32GB we have to do other shennanigans. */ fbase = 0; for_each_node_by_name(np, "axon") { cell_iommu_get_window(np, &dbase, &dsize); fbase = max(fbase, dbase + dsize); } fbase = ALIGN(fbase, 1 << IO_SEGMENT_SHIFT); fsize = memblock_phys_mem_size(); if ((fbase + fsize) <= 0x800000000ul) hbase = 0; /* use the device tree window */ else { /* If we're over 32 GB we need to cheat. We can't map all of * RAM with the fixed mapping, and also fit the dynamic * region. So try to place the dynamic region where the hash * table sits, drivers never need to DMA to it, we don't * need a fixed mapping for that area. */ if (!htab_address) { pr_debug("iommu: htab is NULL, on LPAR? Huh?\n"); return -1; } hbase = __pa(htab_address); hend = hbase + htab_size_bytes; /* The window must start and end on a segment boundary */ if ((hbase != ALIGN(hbase, 1 << IO_SEGMENT_SHIFT)) || (hend != ALIGN(hend, 1 << IO_SEGMENT_SHIFT))) { pr_debug("iommu: hash window not segment aligned\n"); return -1; } /* Check the hash window fits inside the real DMA window */ for_each_node_by_name(np, "axon") { cell_iommu_get_window(np, &dbase, &dsize); if (hbase < dbase || (hend > (dbase + dsize))) { pr_debug("iommu: hash window doesn't fit in" "real DMA window\n"); of_node_put(np); return -1; } } fbase = 0; } /* Setup the dynamic regions */ for_each_node_by_name(np, "axon") { iommu = cell_iommu_alloc(np); BUG_ON(!iommu); if (hbase == 0) cell_iommu_get_window(np, &dbase, &dsize); else { dbase = hbase; dsize = htab_size_bytes; } printk(KERN_DEBUG "iommu: node %d, dynamic window 0x%lx-0x%lx " "fixed window 0x%lx-0x%lx\n", iommu->nid, dbase, dbase + dsize, fbase, fbase + fsize); cell_iommu_setup_stab(iommu, dbase, dsize, fbase, fsize); iommu->ptab = cell_iommu_alloc_ptab(iommu, dbase, dsize, 0, 0, IOMMU_PAGE_SHIFT_4K); cell_iommu_setup_fixed_ptab(iommu, np, dbase, dsize, fbase, fsize); cell_iommu_enable_hardware(iommu); cell_iommu_setup_window(iommu, np, dbase, dsize, 0); } cell_pci_controller_ops.iommu_bypass_supported = cell_pci_iommu_bypass_supported; return 0; } static int iommu_fixed_disabled; static int __init setup_iommu_fixed(char *str) { struct device_node *pciep; if (strcmp(str, "off") == 0) iommu_fixed_disabled = 1; /* If we can find a pcie-endpoint in the device tree assume that * we're on a triblade or a CAB so by default the fixed mapping * should be set to be weakly ordered; but only if the boot * option WASN'T set for strong ordering */ pciep = of_find_node_by_type(NULL, "pcie-endpoint"); if (strcmp(str, "weak") == 0 || (pciep && strcmp(str, "strong") != 0)) iommu_fixed_is_weak = true; of_node_put(pciep); return 1; } __setup("iommu_fixed=", setup_iommu_fixed); static int __init cell_iommu_init(void) { struct device_node *np; /* If IOMMU is disabled or we have little enough RAM to not need * to enable it, we setup a direct mapping. * * Note: should we make sure we have the IOMMU actually disabled ? */ if (iommu_is_off || (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull)) if (cell_iommu_init_disabled() == 0) goto bail; /* Setup various callbacks */ cell_pci_controller_ops.dma_dev_setup = cell_pci_dma_dev_setup; if (!iommu_fixed_disabled && cell_iommu_fixed_mapping_init() == 0) goto done; /* Create an iommu for each /axon node. */ for_each_node_by_name(np, "axon") { if (np->parent == NULL || np->parent->parent != NULL) continue; cell_iommu_init_one(np, 0); } /* Create an iommu for each toplevel /pci-internal node for * old hardware/firmware */ for_each_node_by_name(np, "pci-internal") { if (np->parent == NULL || np->parent->parent != NULL) continue; cell_iommu_init_one(np, SPIDER_DMA_OFFSET); } done: /* Setup default PCI iommu ops */ set_pci_dma_ops(&dma_iommu_ops); cell_iommu_enabled = true; bail: /* Register callbacks on OF platform device addition/removal * to handle linking them to the right DMA operations */ bus_register_notifier(&platform_bus_type, &cell_of_bus_notifier); return 0; } machine_arch_initcall(cell, cell_iommu_init);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1