Contributors: 46
Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
Linus Torvalds (pre-git) |
239 |
25.26% |
18 |
16.98% |
Dean Gaudet |
117 |
12.37% |
1 |
0.94% |
Björn Helgaas |
75 |
7.93% |
10 |
9.43% |
Thomas Gleixner |
75 |
7.93% |
6 |
5.66% |
Andi Kleen |
73 |
7.72% |
6 |
5.66% |
Jiang Liu |
48 |
5.07% |
4 |
3.77% |
Matthew Wilcox |
34 |
3.59% |
2 |
1.89% |
Hans de Goede |
34 |
3.59% |
2 |
1.89% |
Robert Richter |
26 |
2.75% |
4 |
3.77% |
Yinghai Lu |
18 |
1.90% |
4 |
3.77% |
Mathias Krause |
16 |
1.69% |
1 |
0.94% |
Patrick Mochel |
15 |
1.59% |
3 |
2.83% |
Matt Domsch |
12 |
1.27% |
1 |
0.94% |
Len Brown |
12 |
1.27% |
3 |
2.83% |
Maciej W. Rozycki |
11 |
1.16% |
1 |
0.94% |
Linus Torvalds |
11 |
1.16% |
4 |
3.77% |
Gary Hade |
10 |
1.06% |
3 |
2.83% |
Randy Dunlap |
9 |
0.95% |
1 |
0.94% |
Sinan Kaya |
9 |
0.95% |
1 |
0.94% |
Olivier Galibert |
9 |
0.95% |
2 |
1.89% |
Jaswinder Singh Rajput |
8 |
0.85% |
1 |
0.94% |
Aristeu Sergio Rozanski Filho |
7 |
0.74% |
1 |
0.94% |
Joe Perches |
7 |
0.74% |
1 |
0.94% |
Graeme Gregory |
6 |
0.63% |
1 |
0.94% |
Jaya Kumar |
5 |
0.53% |
1 |
0.94% |
Greg Kroah-Hartman |
5 |
0.53% |
2 |
1.89% |
OGAWA Hirofumi |
5 |
0.53% |
2 |
1.89% |
Shaohua Li |
5 |
0.53% |
1 |
0.94% |
Christian König |
4 |
0.42% |
1 |
0.94% |
Andrew Morton |
4 |
0.42% |
2 |
1.89% |
Jan Beulich |
4 |
0.42% |
1 |
0.94% |
Mike Habeck |
4 |
0.42% |
1 |
0.94% |
David Daney |
4 |
0.42% |
1 |
0.94% |
H. Peter Anvin |
4 |
0.42% |
1 |
0.94% |
John Clemens |
4 |
0.42% |
1 |
0.94% |
Benjamin Herrenschmidt |
2 |
0.21% |
1 |
0.94% |
Alex Nixon |
2 |
0.21% |
1 |
0.94% |
Cyrille Pitchen |
2 |
0.21% |
1 |
0.94% |
Otavio Pontes |
2 |
0.21% |
1 |
0.94% |
Gustavo A. R. Silva |
2 |
0.21% |
1 |
0.94% |
Aaron Durbin |
2 |
0.21% |
1 |
0.94% |
Alan Cox |
1 |
0.11% |
1 |
0.94% |
Tomasz Nowicki |
1 |
0.11% |
1 |
0.94% |
Al Viro |
1 |
0.11% |
1 |
0.94% |
Andy Grover |
1 |
0.11% |
1 |
0.94% |
Andres Salomon |
1 |
0.11% |
1 |
0.94% |
Total |
946 |
|
106 |
|
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Low-Level PCI Access for i386 machines.
*
* (c) 1999 Martin Mares <mj@ucw.cz>
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/spinlock.h>
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
#else
#define DBG(fmt, ...) \
do { \
if (0) \
printk(fmt, ##__VA_ARGS__); \
} while (0)
#endif
#define PCI_PROBE_BIOS 0x0001
#define PCI_PROBE_CONF1 0x0002
#define PCI_PROBE_CONF2 0x0004
#define PCI_PROBE_MMCONF 0x0008
#define PCI_PROBE_MASK 0x000f
#define PCI_PROBE_NOEARLY 0x0010
#define PCI_NO_CHECKS 0x0400
#define PCI_USE_PIRQ_MASK 0x0800
#define PCI_ASSIGN_ROMS 0x1000
#define PCI_BIOS_IRQ_SCAN 0x2000
#define PCI_ASSIGN_ALL_BUSSES 0x4000
#define PCI_CAN_SKIP_ISA_ALIGN 0x8000
#define PCI_USE__CRS 0x10000
#define PCI_CHECK_ENABLE_AMD_MMCONF 0x20000
#define PCI_HAS_IO_ECS 0x40000
#define PCI_NOASSIGN_ROMS 0x80000
#define PCI_ROOT_NO_CRS 0x100000
#define PCI_NOASSIGN_BARS 0x200000
#define PCI_BIG_ROOT_WINDOW 0x400000
#define PCI_USE_E820 0x800000
#define PCI_NO_E820 0x1000000
extern unsigned int pci_probe;
extern unsigned long pirq_table_addr;
enum pci_bf_sort_state {
pci_bf_sort_default,
pci_force_nobf,
pci_force_bf,
pci_dmi_bf,
};
/* pci-i386.c */
void pcibios_resource_survey(void);
void pcibios_set_cache_line_size(void);
/* pci-pc.c */
extern int pcibios_last_bus;
extern struct pci_ops pci_root_ops;
void pcibios_scan_specific_bus(int busn);
/* pci-irq.c */
struct pci_dev;
struct irq_info {
u8 bus, devfn; /* Bus, device and function */
struct {
u8 link; /* IRQ line ID, chipset dependent,
0 = not routed */
u16 bitmap; /* Available IRQs */
} __attribute__((packed)) irq[4];
u8 slot; /* Slot number, 0=onboard */
u8 rfu;
} __attribute__((packed));
struct irq_routing_table {
u32 signature; /* PIRQ_SIGNATURE should be here */
u16 version; /* PIRQ_VERSION */
u16 size; /* Table size in bytes */
u8 rtr_bus, rtr_devfn; /* Where the interrupt router lies */
u16 exclusive_irqs; /* IRQs devoted exclusively to
PCI usage */
u16 rtr_vendor, rtr_device; /* Vendor and device ID of
interrupt router */
u32 miniport_data; /* Crap */
u8 rfu[11];
u8 checksum; /* Modulo 256 checksum must give 0 */
struct irq_info slots[];
} __attribute__((packed));
struct irt_routing_table {
u32 signature; /* IRT_SIGNATURE should be here */
u8 size; /* Number of entries provided */
u8 used; /* Number of entries actually used */
u16 exclusive_irqs; /* IRQs devoted exclusively to
PCI usage */
struct irq_info slots[];
} __attribute__((packed));
extern unsigned int pcibios_irq_mask;
extern raw_spinlock_t pci_config_lock;
extern int (*pcibios_enable_irq)(struct pci_dev *dev);
extern void (*pcibios_disable_irq)(struct pci_dev *dev);
extern bool mp_should_keep_irq(struct device *dev);
struct pci_raw_ops {
int (*read)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 *val);
int (*write)(unsigned int domain, unsigned int bus, unsigned int devfn,
int reg, int len, u32 val);
};
extern const struct pci_raw_ops *raw_pci_ops;
extern const struct pci_raw_ops *raw_pci_ext_ops;
extern const struct pci_raw_ops pci_mmcfg;
extern const struct pci_raw_ops pci_direct_conf1;
extern bool port_cf9_safe;
/* arch_initcall level */
#ifdef CONFIG_PCI_DIRECT
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
#else
static inline int pci_direct_probe(void) { return -1; }
static inline void pci_direct_init(int type) { }
#endif
#ifdef CONFIG_PCI_BIOS
extern void pci_pcbios_init(void);
#else
static inline void pci_pcbios_init(void) { }
#endif
extern void __init dmi_check_pciprobe(void);
extern void __init dmi_check_skip_isa_align(void);
/* some common used subsys_initcalls */
#ifdef CONFIG_PCI
extern int __init pci_acpi_init(void);
#else
static inline int __init pci_acpi_init(void)
{
return -EINVAL;
}
#endif
extern void __init pcibios_irq_init(void);
extern int __init pcibios_init(void);
extern int pci_legacy_init(void);
extern void pcibios_fixup_irqs(void);
/* pci-mmconfig.c */
/* "PCI MMCONFIG %04x [bus %02x-%02x]" */
#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2)
struct pci_mmcfg_region {
struct list_head list;
struct resource res;
u64 address;
char __iomem *virt;
u16 segment;
u8 start_bus;
u8 end_bus;
char name[PCI_MMCFG_RESOURCE_NAME_LEN];
};
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
extern void pci_mmcfg_arch_unmap(struct pci_mmcfg_region *cfg);
extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
phys_addr_t addr);
extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
extern struct pci_mmcfg_region *__init pci_mmconfig_add(int segment, int start,
int end, u64 addr);
extern struct list_head pci_mmcfg_list;
#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
/*
* On AMD Fam10h CPUs, all PCI MMIO configuration space accesses must use
* %eax. No other source or target registers may be used. The following
* mmio_config_* accessors enforce this. See "BIOS and Kernel Developer's
* Guide (BKDG) For AMD Family 10h Processors", rev. 3.48, sec 2.11.1,
* "MMIO Configuration Coding Requirements".
*/
static inline unsigned char mmio_config_readb(void __iomem *pos)
{
u8 val;
asm volatile("movb (%1),%%al" : "=a" (val) : "r" (pos));
return val;
}
static inline unsigned short mmio_config_readw(void __iomem *pos)
{
u16 val;
asm volatile("movw (%1),%%ax" : "=a" (val) : "r" (pos));
return val;
}
static inline unsigned int mmio_config_readl(void __iomem *pos)
{
u32 val;
asm volatile("movl (%1),%%eax" : "=a" (val) : "r" (pos));
return val;
}
static inline void mmio_config_writeb(void __iomem *pos, u8 val)
{
asm volatile("movb %%al,(%1)" : : "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writew(void __iomem *pos, u16 val)
{
asm volatile("movw %%ax,(%1)" : : "a" (val), "r" (pos) : "memory");
}
static inline void mmio_config_writel(void __iomem *pos, u32 val)
{
asm volatile("movl %%eax,(%1)" : : "a" (val), "r" (pos) : "memory");
}
#ifdef CONFIG_PCI
# ifdef CONFIG_ACPI
# define x86_default_pci_init pci_acpi_init
# else
# define x86_default_pci_init pci_legacy_init
# endif
# define x86_default_pci_init_irq pcibios_irq_init
# define x86_default_pci_fixup_irqs pcibios_fixup_irqs
#else
# define x86_default_pci_init NULL
# define x86_default_pci_init_irq NULL
# define x86_default_pci_fixup_irqs NULL
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_ACPI)
extern bool pci_use_e820;
#else
#define pci_use_e820 false
#endif