Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Markus Mayer | 2667 | 88.93% | 6 | 15.38% |
Linus Walleij | 103 | 3.43% | 7 | 17.95% |
Axel Lin | 49 | 1.63% | 1 | 2.56% |
Mika Westerberg | 46 | 1.53% | 1 | 2.56% |
Peng Fan | 25 | 0.83% | 1 | 2.56% |
Julia Cartwright | 24 | 0.80% | 1 | 2.56% |
Hans Verkuil | 23 | 0.77% | 1 | 2.56% |
Andy Shevchenko | 10 | 0.33% | 2 | 5.13% |
Andrew Lunn | 8 | 0.27% | 1 | 2.56% |
Alexandre Courbot | 7 | 0.23% | 2 | 5.13% |
Matti Vaittinen | 6 | 0.20% | 1 | 2.56% |
Wei Yongjun | 5 | 0.17% | 1 | 2.56% |
Krzysztof Kozlowski | 5 | 0.17% | 2 | 5.13% |
Laxman Dewangan | 3 | 0.10% | 1 | 2.56% |
Thomas Gleixner | 3 | 0.10% | 2 | 5.13% |
Enrico Weigelt | 3 | 0.10% | 1 | 2.56% |
Jiang Liu | 2 | 0.07% | 1 | 2.56% |
Kees Cook | 2 | 0.07% | 1 | 2.56% |
Ben Dooks | 2 | 0.07% | 1 | 2.56% |
Paul Gortmaker | 2 | 0.07% | 1 | 2.56% |
Julia Lawall | 1 | 0.03% | 1 | 2.56% |
Behan Webster | 1 | 0.03% | 1 | 2.56% |
Tiezhu Yang | 1 | 0.03% | 1 | 2.56% |
Marc Zyngier | 1 | 0.03% | 1 | 2.56% |
Total | 2999 | 39 |
// SPDX-License-Identifier: GPL-2.0-only /* * Broadcom Kona GPIO Driver * * Author: Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com> * Copyright (C) 2012-2014 Broadcom Corporation */ #include <linux/bitops.h> #include <linux/err.h> #include <linux/gpio/driver.h> #include <linux/init.h> #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/irqchip/chained_irq.h> #include <linux/mod_devicetable.h> #include <linux/platform_device.h> #include <linux/property.h> #define BCM_GPIO_PASSWD 0x00a5a501 #define GPIO_PER_BANK 32 #define GPIO_MAX_BANK_NUM 8 #define GPIO_BANK(gpio) ((gpio) >> 5) #define GPIO_BIT(gpio) ((gpio) & (GPIO_PER_BANK - 1)) /* There is a GPIO control register for each GPIO */ #define GPIO_CONTROL(gpio) (0x00000100 + ((gpio) << 2)) /* The remaining registers are per GPIO bank */ #define GPIO_OUT_STATUS(bank) (0x00000000 + ((bank) << 2)) #define GPIO_IN_STATUS(bank) (0x00000020 + ((bank) << 2)) #define GPIO_OUT_SET(bank) (0x00000040 + ((bank) << 2)) #define GPIO_OUT_CLEAR(bank) (0x00000060 + ((bank) << 2)) #define GPIO_INT_STATUS(bank) (0x00000080 + ((bank) << 2)) #define GPIO_INT_MASK(bank) (0x000000a0 + ((bank) << 2)) #define GPIO_INT_MSKCLR(bank) (0x000000c0 + ((bank) << 2)) #define GPIO_PWD_STATUS(bank) (0x00000500 + ((bank) << 2)) #define GPIO_GPPWR_OFFSET 0x00000520 #define GPIO_GPCTR0_DBR_SHIFT 5 #define GPIO_GPCTR0_DBR_MASK 0x000001e0 #define GPIO_GPCTR0_ITR_SHIFT 3 #define GPIO_GPCTR0_ITR_MASK 0x00000018 #define GPIO_GPCTR0_ITR_CMD_RISING_EDGE 0x00000001 #define GPIO_GPCTR0_ITR_CMD_FALLING_EDGE 0x00000002 #define GPIO_GPCTR0_ITR_CMD_BOTH_EDGE 0x00000003 #define GPIO_GPCTR0_IOTR_MASK 0x00000001 #define GPIO_GPCTR0_IOTR_CMD_0UTPUT 0x00000000 #define GPIO_GPCTR0_IOTR_CMD_INPUT 0x00000001 #define GPIO_GPCTR0_DB_ENABLE_MASK 0x00000100 #define LOCK_CODE 0xffffffff #define UNLOCK_CODE 0x00000000 struct bcm_kona_gpio { void __iomem *reg_base; int num_bank; raw_spinlock_t lock; struct gpio_chip gpio_chip; struct irq_domain *irq_domain; struct bcm_kona_gpio_bank *banks; }; struct bcm_kona_gpio_bank { int id; int irq; /* Used in the interrupt handler */ struct bcm_kona_gpio *kona_gpio; }; static inline void bcm_kona_gpio_write_lock_regs(void __iomem *reg_base, int bank_id, u32 lockcode) { writel(BCM_GPIO_PASSWD, reg_base + GPIO_GPPWR_OFFSET); writel(lockcode, reg_base + GPIO_PWD_STATUS(bank_id)); } static void bcm_kona_gpio_lock_gpio(struct bcm_kona_gpio *kona_gpio, unsigned gpio) { u32 val; unsigned long flags; int bank_id = GPIO_BANK(gpio); raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); val |= BIT(gpio); bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio, unsigned gpio) { u32 val; unsigned long flags; int bank_id = GPIO_BANK(gpio); raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(kona_gpio->reg_base + GPIO_PWD_STATUS(bank_id)); val &= ~BIT(gpio); bcm_kona_gpio_write_lock_regs(kona_gpio->reg_base, bank_id, val); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); void __iomem *reg_base = kona_gpio->reg_base; u32 val; val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK; return val ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT; } static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val, reg_offset; unsigned long flags; kona_gpio = gpiochip_get_data(chip); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); /* this function only applies to output pin */ if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN) goto out; reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); val = readl(reg_base + reg_offset); val |= BIT(bit); writel(val, reg_base + reg_offset); out: raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val, reg_offset; unsigned long flags; kona_gpio = gpiochip_get_data(chip); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); if (bcm_kona_gpio_get_dir(chip, gpio) == GPIO_LINE_DIRECTION_IN) reg_offset = GPIO_IN_STATUS(bank_id); else reg_offset = GPIO_OUT_STATUS(bank_id); /* read the GPIO bank status */ val = readl(reg_base + reg_offset); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); /* return the specified bit status */ return !!(val & BIT(bit)); } static int bcm_kona_gpio_request(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); bcm_kona_gpio_unlock_gpio(kona_gpio, gpio); return 0; } static void bcm_kona_gpio_free(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio = gpiochip_get_data(chip); bcm_kona_gpio_lock_gpio(kona_gpio, gpio); } static int bcm_kona_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; u32 val; unsigned long flags; kona_gpio = gpiochip_get_data(chip); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_CONTROL(gpio)); val &= ~GPIO_GPCTR0_IOTR_MASK; val |= GPIO_GPCTR0_IOTR_CMD_INPUT; writel(val, reg_base + GPIO_CONTROL(gpio)); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); return 0; } static int bcm_kona_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val, reg_offset; unsigned long flags; kona_gpio = gpiochip_get_data(chip); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_CONTROL(gpio)); val &= ~GPIO_GPCTR0_IOTR_MASK; val |= GPIO_GPCTR0_IOTR_CMD_0UTPUT; writel(val, reg_base + GPIO_CONTROL(gpio)); reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id); val = readl(reg_base + reg_offset); val |= BIT(bit); writel(val, reg_base + reg_offset); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); return 0; } static int bcm_kona_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) { struct bcm_kona_gpio *kona_gpio; kona_gpio = gpiochip_get_data(chip); if (gpio >= kona_gpio->gpio_chip.ngpio) return -ENXIO; return irq_create_mapping(kona_gpio->irq_domain, gpio); } static int bcm_kona_gpio_set_debounce(struct gpio_chip *chip, unsigned gpio, unsigned debounce) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; u32 val, res; unsigned long flags; kona_gpio = gpiochip_get_data(chip); reg_base = kona_gpio->reg_base; /* debounce must be 1-128ms (or 0) */ if ((debounce > 0 && debounce < 1000) || debounce > 128000) { dev_err(chip->parent, "Debounce value %u not in range\n", debounce); return -EINVAL; } /* calculate debounce bit value */ if (debounce != 0) { /* Convert to ms */ debounce /= 1000; /* find the MSB */ res = fls(debounce) - 1; /* Check if MSB-1 is set (round up or down) */ if (res > 0 && (debounce & BIT(res - 1))) res++; } /* spin lock for read-modify-write of the GPIO register */ raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_CONTROL(gpio)); val &= ~GPIO_GPCTR0_DBR_MASK; if (debounce == 0) { /* disable debounce */ val &= ~GPIO_GPCTR0_DB_ENABLE_MASK; } else { val |= GPIO_GPCTR0_DB_ENABLE_MASK | (res << GPIO_GPCTR0_DBR_SHIFT); } writel(val, reg_base + GPIO_CONTROL(gpio)); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); return 0; } static int bcm_kona_gpio_set_config(struct gpio_chip *chip, unsigned gpio, unsigned long config) { u32 debounce; if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) return -ENOTSUPP; debounce = pinconf_to_config_argument(config); return bcm_kona_gpio_set_debounce(chip, gpio, debounce); } static const struct gpio_chip template_chip = { .label = "bcm-kona-gpio", .owner = THIS_MODULE, .request = bcm_kona_gpio_request, .free = bcm_kona_gpio_free, .get_direction = bcm_kona_gpio_get_dir, .direction_input = bcm_kona_gpio_direction_input, .get = bcm_kona_gpio_get, .direction_output = bcm_kona_gpio_direction_output, .set = bcm_kona_gpio_set, .set_config = bcm_kona_gpio_set_config, .to_irq = bcm_kona_gpio_to_irq, .base = 0, }; static void bcm_kona_gpio_irq_ack(struct irq_data *d) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; unsigned gpio = d->hwirq; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val; unsigned long flags; kona_gpio = irq_data_get_irq_chip_data(d); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_INT_STATUS(bank_id)); val |= BIT(bit); writel(val, reg_base + GPIO_INT_STATUS(bank_id)); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static void bcm_kona_gpio_irq_mask(struct irq_data *d) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; unsigned gpio = d->hwirq; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val; unsigned long flags; kona_gpio = irq_data_get_irq_chip_data(d); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_INT_MASK(bank_id)); val |= BIT(bit); writel(val, reg_base + GPIO_INT_MASK(bank_id)); gpiochip_disable_irq(&kona_gpio->gpio_chip, gpio); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static void bcm_kona_gpio_irq_unmask(struct irq_data *d) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; unsigned gpio = d->hwirq; int bank_id = GPIO_BANK(gpio); int bit = GPIO_BIT(gpio); u32 val; unsigned long flags; kona_gpio = irq_data_get_irq_chip_data(d); reg_base = kona_gpio->reg_base; raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_INT_MSKCLR(bank_id)); val |= BIT(bit); writel(val, reg_base + GPIO_INT_MSKCLR(bank_id)); gpiochip_enable_irq(&kona_gpio->gpio_chip, gpio); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); } static int bcm_kona_gpio_irq_set_type(struct irq_data *d, unsigned int type) { struct bcm_kona_gpio *kona_gpio; void __iomem *reg_base; unsigned gpio = d->hwirq; u32 lvl_type; u32 val; unsigned long flags; kona_gpio = irq_data_get_irq_chip_data(d); reg_base = kona_gpio->reg_base; switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_EDGE_RISING: lvl_type = GPIO_GPCTR0_ITR_CMD_RISING_EDGE; break; case IRQ_TYPE_EDGE_FALLING: lvl_type = GPIO_GPCTR0_ITR_CMD_FALLING_EDGE; break; case IRQ_TYPE_EDGE_BOTH: lvl_type = GPIO_GPCTR0_ITR_CMD_BOTH_EDGE; break; case IRQ_TYPE_LEVEL_HIGH: case IRQ_TYPE_LEVEL_LOW: /* BCM GPIO doesn't support level triggering */ default: dev_err(kona_gpio->gpio_chip.parent, "Invalid BCM GPIO irq type 0x%x\n", type); return -EINVAL; } raw_spin_lock_irqsave(&kona_gpio->lock, flags); val = readl(reg_base + GPIO_CONTROL(gpio)); val &= ~GPIO_GPCTR0_ITR_MASK; val |= lvl_type << GPIO_GPCTR0_ITR_SHIFT; writel(val, reg_base + GPIO_CONTROL(gpio)); raw_spin_unlock_irqrestore(&kona_gpio->lock, flags); return 0; } static void bcm_kona_gpio_irq_handler(struct irq_desc *desc) { void __iomem *reg_base; int bit, bank_id; unsigned long sta; struct bcm_kona_gpio_bank *bank = irq_desc_get_handler_data(desc); struct irq_chip *chip = irq_desc_get_chip(desc); chained_irq_enter(chip, desc); /* * For bank interrupts, we can't use chip_data to store the kona_gpio * pointer, since GIC needs it for its own purposes. Therefore, we get * our pointer from the bank structure. */ reg_base = bank->kona_gpio->reg_base; bank_id = bank->id; while ((sta = readl(reg_base + GPIO_INT_STATUS(bank_id)) & (~(readl(reg_base + GPIO_INT_MASK(bank_id)))))) { for_each_set_bit(bit, &sta, 32) { int hwirq = GPIO_PER_BANK * bank_id + bit; /* * Clear interrupt before handler is called so we don't * miss any interrupt occurred during executing them. */ writel(readl(reg_base + GPIO_INT_STATUS(bank_id)) | BIT(bit), reg_base + GPIO_INT_STATUS(bank_id)); /* Invoke interrupt handler */ generic_handle_domain_irq(bank->kona_gpio->irq_domain, hwirq); } } chained_irq_exit(chip, desc); } static int bcm_kona_gpio_irq_reqres(struct irq_data *d) { struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); return gpiochip_reqres_irq(&kona_gpio->gpio_chip, d->hwirq); } static void bcm_kona_gpio_irq_relres(struct irq_data *d) { struct bcm_kona_gpio *kona_gpio = irq_data_get_irq_chip_data(d); gpiochip_relres_irq(&kona_gpio->gpio_chip, d->hwirq); } static struct irq_chip bcm_gpio_irq_chip = { .name = "bcm-kona-gpio", .irq_ack = bcm_kona_gpio_irq_ack, .irq_mask = bcm_kona_gpio_irq_mask, .irq_unmask = bcm_kona_gpio_irq_unmask, .irq_set_type = bcm_kona_gpio_irq_set_type, .irq_request_resources = bcm_kona_gpio_irq_reqres, .irq_release_resources = bcm_kona_gpio_irq_relres, }; static struct of_device_id const bcm_kona_gpio_of_match[] = { { .compatible = "brcm,kona-gpio" }, {} }; /* * This lock class tells lockdep that GPIO irqs are in a different * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; static struct lock_class_key gpio_request_class; static int bcm_kona_gpio_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hwirq) { int ret; ret = irq_set_chip_data(irq, d->host_data); if (ret < 0) return ret; irq_set_lockdep_class(irq, &gpio_lock_class, &gpio_request_class); irq_set_chip_and_handler(irq, &bcm_gpio_irq_chip, handle_simple_irq); irq_set_noprobe(irq); return 0; } static void bcm_kona_gpio_irq_unmap(struct irq_domain *d, unsigned int irq) { irq_set_chip_and_handler(irq, NULL, NULL); irq_set_chip_data(irq, NULL); } static const struct irq_domain_ops bcm_kona_irq_ops = { .map = bcm_kona_gpio_irq_map, .unmap = bcm_kona_gpio_irq_unmap, .xlate = irq_domain_xlate_twocell, }; static void bcm_kona_gpio_reset(struct bcm_kona_gpio *kona_gpio) { void __iomem *reg_base; int i; reg_base = kona_gpio->reg_base; /* disable interrupts and clear status */ for (i = 0; i < kona_gpio->num_bank; i++) { /* Unlock the entire bank first */ bcm_kona_gpio_write_lock_regs(reg_base, i, UNLOCK_CODE); writel(0xffffffff, reg_base + GPIO_INT_MASK(i)); writel(0xffffffff, reg_base + GPIO_INT_STATUS(i)); /* Now re-lock the bank */ bcm_kona_gpio_write_lock_regs(reg_base, i, LOCK_CODE); } } static int bcm_kona_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct bcm_kona_gpio_bank *bank; struct bcm_kona_gpio *kona_gpio; struct gpio_chip *chip; int ret; int i; kona_gpio = devm_kzalloc(dev, sizeof(*kona_gpio), GFP_KERNEL); if (!kona_gpio) return -ENOMEM; kona_gpio->gpio_chip = template_chip; chip = &kona_gpio->gpio_chip; ret = platform_irq_count(pdev); if (!ret) { dev_err(dev, "Couldn't determine # GPIO banks\n"); return -ENOENT; } else if (ret < 0) { return dev_err_probe(dev, ret, "Couldn't determine GPIO banks\n"); } kona_gpio->num_bank = ret; if (kona_gpio->num_bank > GPIO_MAX_BANK_NUM) { dev_err(dev, "Too many GPIO banks configured (max=%d)\n", GPIO_MAX_BANK_NUM); return -ENXIO; } kona_gpio->banks = devm_kcalloc(dev, kona_gpio->num_bank, sizeof(*kona_gpio->banks), GFP_KERNEL); if (!kona_gpio->banks) return -ENOMEM; chip->parent = dev; chip->ngpio = kona_gpio->num_bank * GPIO_PER_BANK; kona_gpio->irq_domain = irq_domain_create_linear(dev_fwnode(dev), chip->ngpio, &bcm_kona_irq_ops, kona_gpio); if (!kona_gpio->irq_domain) { dev_err(dev, "Couldn't allocate IRQ domain\n"); return -ENXIO; } kona_gpio->reg_base = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(kona_gpio->reg_base)) { ret = PTR_ERR(kona_gpio->reg_base); goto err_irq_domain; } for (i = 0; i < kona_gpio->num_bank; i++) { bank = &kona_gpio->banks[i]; bank->id = i; bank->irq = platform_get_irq(pdev, i); bank->kona_gpio = kona_gpio; if (bank->irq < 0) { dev_err(dev, "Couldn't get IRQ for bank %d", i); ret = -ENOENT; goto err_irq_domain; } } dev_info(&pdev->dev, "Setting up Kona GPIO\n"); bcm_kona_gpio_reset(kona_gpio); ret = devm_gpiochip_add_data(dev, chip, kona_gpio); if (ret < 0) { dev_err(dev, "Couldn't add GPIO chip -- %d\n", ret); goto err_irq_domain; } for (i = 0; i < kona_gpio->num_bank; i++) { bank = &kona_gpio->banks[i]; irq_set_chained_handler_and_data(bank->irq, bcm_kona_gpio_irq_handler, bank); } raw_spin_lock_init(&kona_gpio->lock); return 0; err_irq_domain: irq_domain_remove(kona_gpio->irq_domain); return ret; } static struct platform_driver bcm_kona_gpio_driver = { .driver = { .name = "bcm-kona-gpio", .of_match_table = bcm_kona_gpio_of_match, }, .probe = bcm_kona_gpio_probe, }; builtin_platform_driver(bcm_kona_gpio_driver);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1