Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vinod Polimera | 455 | 35.14% | 4 | 11.76% |
Kuogee Hsieh | 265 | 20.46% | 5 | 14.71% |
Chandan Uddaraju | 241 | 18.61% | 1 | 2.94% |
Dmitry Eremin-Solenikov | 223 | 17.22% | 9 | 26.47% |
Björn Andersson | 40 | 3.09% | 3 | 8.82% |
Rob Clark | 25 | 1.93% | 4 | 11.76% |
Jeykumar Sankaran | 16 | 1.24% | 1 | 2.94% |
Paloma Arellano | 13 | 1.00% | 1 | 2.94% |
Sankeerth Billakanti | 10 | 0.77% | 1 | 2.94% |
Hai Li | 2 | 0.15% | 1 | 2.94% |
Jonathan Marek | 2 | 0.15% | 1 | 2.94% |
Thomas Gleixner | 1 | 0.08% | 1 | 2.94% |
Archit Taneja | 1 | 0.08% | 1 | 2.94% |
Sam Ravnborg | 1 | 0.08% | 1 | 2.94% |
Total | 1295 | 34 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. */ #include <drm/drm_atomic_helper.h> #include <drm/drm_atomic.h> #include <drm/drm_bridge.h> #include <drm/drm_bridge_connector.h> #include <drm/drm_crtc.h> #include "msm_drv.h" #include "msm_kms.h" #include "dp_drm.h" /** * dp_bridge_detect - callback to determine if connector is connected * @bridge: Pointer to drm bridge structure * Returns: Bridge's 'is connected' status */ static enum drm_connector_status dp_bridge_detect(struct drm_bridge *bridge) { struct msm_dp *dp; dp = to_dp_bridge(bridge)->dp_display; drm_dbg_dp(dp->drm_dev, "link_ready = %s\n", (dp->link_ready) ? "true" : "false"); return (dp->link_ready) ? connector_status_connected : connector_status_disconnected; } static int dp_bridge_atomic_check(struct drm_bridge *bridge, struct drm_bridge_state *bridge_state, struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state) { struct msm_dp *dp; dp = to_dp_bridge(bridge)->dp_display; drm_dbg_dp(dp->drm_dev, "link_ready = %s\n", (dp->link_ready) ? "true" : "false"); /* * There is no protection in the DRM framework to check if the display * pipeline has been already disabled before trying to disable it again. * Hence if the sink is unplugged, the pipeline gets disabled, but the * crtc->active is still true. Any attempt to set the mode or manually * disable this encoder will result in the crash. * * TODO: add support for telling the DRM subsystem that the pipeline is * disabled by the hardware and thus all access to it should be forbidden. * After that this piece of code can be removed. */ if (bridge->ops & DRM_BRIDGE_OP_HPD) return (dp->link_ready) ? 0 : -ENOTCONN; return 0; } /** * dp_bridge_get_modes - callback to add drm modes via drm_mode_probed_add() * @bridge: Poiner to drm bridge * @connector: Pointer to drm connector structure * Returns: Number of modes added */ static int dp_bridge_get_modes(struct drm_bridge *bridge, struct drm_connector *connector) { int rc = 0; struct msm_dp *dp; if (!connector) return 0; dp = to_dp_bridge(bridge)->dp_display; /* pluggable case assumes EDID is read when HPD */ if (dp->link_ready) { rc = dp_display_get_modes(dp); if (rc <= 0) { DRM_ERROR("failed to get DP sink modes, rc=%d\n", rc); return rc; } } else { drm_dbg_dp(connector->dev, "No sink connected\n"); } return rc; } static void dp_bridge_debugfs_init(struct drm_bridge *bridge, struct dentry *root) { struct msm_dp *dp = to_dp_bridge(bridge)->dp_display; dp_display_debugfs_init(dp, root, false); } static const struct drm_bridge_funcs dp_bridge_ops = { .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, .atomic_reset = drm_atomic_helper_bridge_reset, .atomic_enable = dp_bridge_atomic_enable, .atomic_disable = dp_bridge_atomic_disable, .atomic_post_disable = dp_bridge_atomic_post_disable, .mode_set = dp_bridge_mode_set, .mode_valid = dp_bridge_mode_valid, .get_modes = dp_bridge_get_modes, .detect = dp_bridge_detect, .atomic_check = dp_bridge_atomic_check, .hpd_enable = dp_bridge_hpd_enable, .hpd_disable = dp_bridge_hpd_disable, .hpd_notify = dp_bridge_hpd_notify, .debugfs_init = dp_bridge_debugfs_init, }; static int edp_bridge_atomic_check(struct drm_bridge *drm_bridge, struct drm_bridge_state *bridge_state, struct drm_crtc_state *crtc_state, struct drm_connector_state *conn_state) { struct msm_dp *dp = to_dp_bridge(drm_bridge)->dp_display; if (WARN_ON(!conn_state)) return -ENODEV; conn_state->self_refresh_aware = dp->psr_supported; if (!conn_state->crtc || !crtc_state) return 0; if (crtc_state->self_refresh_active && !dp->psr_supported) return -EINVAL; return 0; } static void edp_bridge_atomic_enable(struct drm_bridge *drm_bridge, struct drm_bridge_state *old_bridge_state) { struct drm_atomic_state *atomic_state = old_bridge_state->base.state; struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; struct msm_dp_bridge *dp_bridge = to_dp_bridge(drm_bridge); struct msm_dp *dp = dp_bridge->dp_display; /* * Check the old state of the crtc to determine if the panel * was put into psr state previously by the edp_bridge_atomic_disable. * If the panel is in psr, just exit psr state and skip the full * bridge enable sequence. */ crtc = drm_atomic_get_new_crtc_for_encoder(atomic_state, drm_bridge->encoder); if (!crtc) return; old_crtc_state = drm_atomic_get_old_crtc_state(atomic_state, crtc); if (old_crtc_state && old_crtc_state->self_refresh_active) { dp_display_set_psr(dp, false); return; } dp_bridge_atomic_enable(drm_bridge, old_bridge_state); } static void edp_bridge_atomic_disable(struct drm_bridge *drm_bridge, struct drm_bridge_state *old_bridge_state) { struct drm_atomic_state *atomic_state = old_bridge_state->base.state; struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state = NULL, *old_crtc_state = NULL; struct msm_dp_bridge *dp_bridge = to_dp_bridge(drm_bridge); struct msm_dp *dp = dp_bridge->dp_display; crtc = drm_atomic_get_old_crtc_for_encoder(atomic_state, drm_bridge->encoder); if (!crtc) goto out; new_crtc_state = drm_atomic_get_new_crtc_state(atomic_state, crtc); if (!new_crtc_state) goto out; old_crtc_state = drm_atomic_get_old_crtc_state(atomic_state, crtc); if (!old_crtc_state) goto out; /* * Set self refresh mode if current crtc state is active. * * If old crtc state is active, then this is a display disable * call while the sink is in psr state. So, exit psr here. * The eDP controller will be disabled in the * edp_bridge_atomic_post_disable function. * * We observed sink is stuck in self refresh if psr exit is skipped * when display disable occurs while the sink is in psr state. */ if (new_crtc_state->self_refresh_active) { dp_display_set_psr(dp, true); return; } else if (old_crtc_state->self_refresh_active) { dp_display_set_psr(dp, false); return; } out: dp_bridge_atomic_disable(drm_bridge, old_bridge_state); } static void edp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, struct drm_bridge_state *old_bridge_state) { struct drm_atomic_state *atomic_state = old_bridge_state->base.state; struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state = NULL; crtc = drm_atomic_get_old_crtc_for_encoder(atomic_state, drm_bridge->encoder); if (!crtc) return; new_crtc_state = drm_atomic_get_new_crtc_state(atomic_state, crtc); if (!new_crtc_state) return; /* * Self refresh mode is already set in edp_bridge_atomic_disable. */ if (new_crtc_state->self_refresh_active) return; dp_bridge_atomic_post_disable(drm_bridge, old_bridge_state); } /** * edp_bridge_mode_valid - callback to determine if specified mode is valid * @bridge: Pointer to drm bridge structure * @info: display info * @mode: Pointer to drm mode structure * Returns: Validity status for specified mode */ static enum drm_mode_status edp_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_info *info, const struct drm_display_mode *mode) { struct msm_dp *dp; int mode_pclk_khz = mode->clock; dp = to_dp_bridge(bridge)->dp_display; if (!dp || !mode_pclk_khz || !dp->connector) { DRM_ERROR("invalid params\n"); return -EINVAL; } if (mode->clock > DP_MAX_PIXEL_CLK_KHZ) return MODE_CLOCK_HIGH; /* * The eDP controller currently does not have a reliable way of * enabling panel power to read sink capabilities. So, we rely * on the panel driver to populate only supported modes for now. */ return MODE_OK; } static void edp_bridge_debugfs_init(struct drm_bridge *bridge, struct dentry *root) { struct msm_dp *dp = to_dp_bridge(bridge)->dp_display; dp_display_debugfs_init(dp, root, true); } static const struct drm_bridge_funcs edp_bridge_ops = { .atomic_enable = edp_bridge_atomic_enable, .atomic_disable = edp_bridge_atomic_disable, .atomic_post_disable = edp_bridge_atomic_post_disable, .mode_set = dp_bridge_mode_set, .mode_valid = edp_bridge_mode_valid, .atomic_reset = drm_atomic_helper_bridge_reset, .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, .atomic_check = edp_bridge_atomic_check, .debugfs_init = edp_bridge_debugfs_init, }; int dp_bridge_init(struct msm_dp *dp_display, struct drm_device *dev, struct drm_encoder *encoder) { int rc; struct msm_dp_bridge *dp_bridge; struct drm_bridge *bridge; dp_bridge = devm_kzalloc(dev->dev, sizeof(*dp_bridge), GFP_KERNEL); if (!dp_bridge) return -ENOMEM; dp_bridge->dp_display = dp_display; bridge = &dp_bridge->bridge; bridge->funcs = dp_display->is_edp ? &edp_bridge_ops : &dp_bridge_ops; bridge->type = dp_display->connector_type; /* * Many ops only make sense for DP. Why? * - Detect/HPD are used by DRM to know if a display is _physically_ * there, not whether the display is powered on / finished initting. * On eDP we assume the display is always there because you can't * know until power is applied. If we don't implement the ops DRM will * assume our display is always there. * - Currently eDP mode reading is driven by the panel driver. This * allows the panel driver to properly power itself on to read the * modes. */ if (!dp_display->is_edp) { bridge->ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_MODES; } rc = devm_drm_bridge_add(dev->dev, bridge); if (rc) { DRM_ERROR("failed to add bridge, rc=%d\n", rc); return rc; } rc = drm_bridge_attach(encoder, bridge, NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR); if (rc) { DRM_ERROR("failed to attach bridge, rc=%d\n", rc); return rc; } if (dp_display->next_bridge) { rc = drm_bridge_attach(encoder, dp_display->next_bridge, bridge, DRM_BRIDGE_ATTACH_NO_CONNECTOR); if (rc < 0) { DRM_ERROR("failed to attach panel bridge: %d\n", rc); return rc; } } return 0; } /* connector initialization */ struct drm_connector *dp_drm_connector_init(struct msm_dp *dp_display, struct drm_encoder *encoder, bool yuv_supported) { struct drm_connector *connector = NULL; connector = drm_bridge_connector_init(dp_display->drm_dev, encoder); if (IS_ERR(connector)) return connector; if (!dp_display->is_edp) drm_connector_attach_dp_subconnector_property(connector); if (yuv_supported) connector->ycbcr_420_allowed = true; drm_connector_attach_encoder(connector, encoder); return connector; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1