Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Guenter Roeck | 597 | 43.70% | 8 | 44.44% |
Vadim Pasternak | 585 | 42.83% | 4 | 22.22% |
Erik Rosen | 172 | 12.59% | 1 | 5.56% |
Stephen Kitt | 7 | 0.51% | 1 | 5.56% |
Thomas Gleixner | 2 | 0.15% | 1 | 5.56% |
Uwe Kleine-König | 1 | 0.07% | 1 | 5.56% |
Krzysztof Kozlowski | 1 | 0.07% | 1 | 5.56% |
Rob Herring | 1 | 0.07% | 1 | 5.56% |
Total | 1366 | 18 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Hardware monitoring driver for Texas Instruments TPS53679 * * Copyright (c) 2017 Mellanox Technologies. All rights reserved. * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com> */ #include <linux/bits.h> #include <linux/err.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include "pmbus.h" enum chips { tps53647, tps53667, tps53676, tps53679, tps53681, tps53688 }; #define TPS53647_PAGE_NUM 1 #define TPS53676_USER_DATA_03 0xb3 #define TPS53676_MAX_PHASES 7 #define TPS53679_PROT_VR12_5MV 0x01 /* VR12.0 mode, 5-mV DAC */ #define TPS53679_PROT_VR12_5_10MV 0x02 /* VR12.5 mode, 10-mV DAC */ #define TPS53679_PROT_VR13_10MV 0x04 /* VR13.0 mode, 10-mV DAC */ #define TPS53679_PROT_IMVP8_5MV 0x05 /* IMVP8 mode, 5-mV DAC */ #define TPS53679_PROT_VR13_5MV 0x07 /* VR13.0 mode, 5-mV DAC */ #define TPS53679_PAGE_NUM 2 #define TPS53681_DEVICE_ID 0x81 #define TPS53681_PMBUS_REVISION 0x33 #define TPS53681_MFR_SPECIFIC_20 0xe4 /* Number of phases, per page */ static const struct i2c_device_id tps53679_id[]; static int tps53679_identify_mode(struct i2c_client *client, struct pmbus_driver_info *info) { u8 vout_params; int i, ret; for (i = 0; i < info->pages; i++) { /* Read the register with VOUT scaling value.*/ ret = pmbus_read_byte_data(client, i, PMBUS_VOUT_MODE); if (ret < 0) return ret; vout_params = ret & GENMASK(4, 0); switch (vout_params) { case TPS53679_PROT_VR13_10MV: case TPS53679_PROT_VR12_5_10MV: info->vrm_version[i] = vr13; break; case TPS53679_PROT_VR13_5MV: case TPS53679_PROT_VR12_5MV: case TPS53679_PROT_IMVP8_5MV: info->vrm_version[i] = vr12; break; default: return -EINVAL; } } return 0; } static int tps53679_identify_phases(struct i2c_client *client, struct pmbus_driver_info *info) { int ret; /* On TPS53681, only channel A provides per-phase output current */ ret = pmbus_read_byte_data(client, 0, TPS53681_MFR_SPECIFIC_20); if (ret < 0) return ret; info->phases[0] = (ret & 0x07) + 1; return 0; } static int tps53679_identify_chip(struct i2c_client *client, u8 revision, u16 id) { u8 buf[I2C_SMBUS_BLOCK_MAX]; int ret; ret = pmbus_read_byte_data(client, 0, PMBUS_REVISION); if (ret < 0) return ret; if (ret != revision) { dev_err(&client->dev, "Unexpected PMBus revision 0x%x\n", ret); return -ENODEV; } ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); if (ret < 0) return ret; if (ret != 1 || buf[0] != id) { dev_err(&client->dev, "Unexpected device ID 0x%x\n", buf[0]); return -ENODEV; } return 0; } /* * Common identification function for chips with multi-phase support. * Since those chips have special configuration registers, we want to have * some level of reassurance that we are really talking with the chip * being probed. Check PMBus revision and chip ID. */ static int tps53679_identify_multiphase(struct i2c_client *client, struct pmbus_driver_info *info, int pmbus_rev, int device_id) { int ret; ret = tps53679_identify_chip(client, pmbus_rev, device_id); if (ret < 0) return ret; ret = tps53679_identify_mode(client, info); if (ret < 0) return ret; return tps53679_identify_phases(client, info); } static int tps53679_identify(struct i2c_client *client, struct pmbus_driver_info *info) { return tps53679_identify_mode(client, info); } static int tps53681_identify(struct i2c_client *client, struct pmbus_driver_info *info) { return tps53679_identify_multiphase(client, info, TPS53681_PMBUS_REVISION, TPS53681_DEVICE_ID); } static int tps53676_identify(struct i2c_client *client, struct pmbus_driver_info *info) { u8 buf[I2C_SMBUS_BLOCK_MAX]; int phases_a = 0, phases_b = 0; int i, ret; ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); if (ret < 0) return ret; if (strncmp("TI\x53\x67\x60", buf, 5)) { dev_err(&client->dev, "Unexpected device ID: %s\n", buf); return -ENODEV; } ret = i2c_smbus_read_block_data(client, TPS53676_USER_DATA_03, buf); if (ret < 0) return ret; if (ret != 24) return -EIO; for (i = 0; i < 2 * TPS53676_MAX_PHASES; i += 2) { if (buf[i + 1] & 0x80) { if (buf[i] & 0x08) phases_b++; else phases_a++; } } info->format[PSC_VOLTAGE_OUT] = linear; info->pages = 1; info->phases[0] = phases_a; if (phases_b > 0) { info->pages = 2; info->phases[1] = phases_b; } return 0; } static int tps53681_read_word_data(struct i2c_client *client, int page, int phase, int reg) { /* * For reading the total output current (READ_IOUT) for all phases, * the chip datasheet is a bit vague. It says "PHASE must be set to * FFh to access all phases simultaneously. PHASE may also be set to * 80h readack (!) the total phase current". * Experiments show that the command does _not_ report the total * current for all phases if the phase is set to 0xff. Instead, it * appears to report the current of one of the phases. Override phase * parameter with 0x80 when reading the total output current on page 0. */ if (reg == PMBUS_READ_IOUT && page == 0 && phase == 0xff) return pmbus_read_word_data(client, page, 0x80, reg); return -ENODATA; } static struct pmbus_driver_info tps53679_info = { .format[PSC_VOLTAGE_IN] = linear, .format[PSC_VOLTAGE_OUT] = vid, .format[PSC_TEMPERATURE] = linear, .format[PSC_CURRENT_OUT] = linear, .format[PSC_POWER] = linear, .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, .func[1] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_HAVE_POUT, .pfunc[0] = PMBUS_HAVE_IOUT, .pfunc[1] = PMBUS_HAVE_IOUT, .pfunc[2] = PMBUS_HAVE_IOUT, .pfunc[3] = PMBUS_HAVE_IOUT, .pfunc[4] = PMBUS_HAVE_IOUT, .pfunc[5] = PMBUS_HAVE_IOUT, .pfunc[6] = PMBUS_HAVE_IOUT, }; static int tps53679_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct pmbus_driver_info *info; enum chips chip_id; if (dev->of_node) chip_id = (uintptr_t)of_device_get_match_data(dev); else chip_id = i2c_match_id(tps53679_id, client)->driver_data; info = devm_kmemdup(dev, &tps53679_info, sizeof(*info), GFP_KERNEL); if (!info) return -ENOMEM; switch (chip_id) { case tps53647: case tps53667: info->pages = TPS53647_PAGE_NUM; info->identify = tps53679_identify; break; case tps53676: info->identify = tps53676_identify; break; case tps53679: case tps53688: info->pages = TPS53679_PAGE_NUM; info->identify = tps53679_identify; break; case tps53681: info->pages = TPS53679_PAGE_NUM; info->phases[0] = 6; info->identify = tps53681_identify; info->read_word_data = tps53681_read_word_data; break; default: return -ENODEV; } return pmbus_do_probe(client, info); } static const struct i2c_device_id tps53679_id[] = { {"bmr474", tps53676}, {"tps53647", tps53647}, {"tps53667", tps53667}, {"tps53676", tps53676}, {"tps53679", tps53679}, {"tps53681", tps53681}, {"tps53688", tps53688}, {} }; MODULE_DEVICE_TABLE(i2c, tps53679_id); static const struct of_device_id __maybe_unused tps53679_of_match[] = { {.compatible = "ti,tps53647", .data = (void *)tps53647}, {.compatible = "ti,tps53667", .data = (void *)tps53667}, {.compatible = "ti,tps53676", .data = (void *)tps53676}, {.compatible = "ti,tps53679", .data = (void *)tps53679}, {.compatible = "ti,tps53681", .data = (void *)tps53681}, {.compatible = "ti,tps53688", .data = (void *)tps53688}, {} }; MODULE_DEVICE_TABLE(of, tps53679_of_match); static struct i2c_driver tps53679_driver = { .driver = { .name = "tps53679", .of_match_table = of_match_ptr(tps53679_of_match), }, .probe = tps53679_probe, .id_table = tps53679_id, }; module_i2c_driver(tps53679_driver); MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>"); MODULE_DESCRIPTION("PMBus driver for Texas Instruments TPS53679"); MODULE_LICENSE("GPL"); MODULE_IMPORT_NS(PMBUS);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1