| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Jean Delvare | 3530 | 36.16% | 46 | 48.94% |
| Martin Schlemmer | 2007 | 20.56% | 1 | 1.06% |
| Wolfgang Grandegger | 1824 | 18.69% | 2 | 2.13% |
| Mark M. Hoffman | 1334 | 13.67% | 8 | 8.51% |
| Guenter Roeck | 509 | 5.21% | 7 | 7.45% |
| Jim Cromie | 225 | 2.31% | 1 | 1.06% |
| Greg Kroah-Hartman | 101 | 1.03% | 5 | 5.32% |
| Linus Walleij | 58 | 0.59% | 1 | 1.06% |
| Yani Ioannou | 43 | 0.44% | 1 | 1.06% |
| Joe Perches | 36 | 0.37% | 1 | 1.06% |
| Ingo Molnar | 17 | 0.17% | 1 | 1.06% |
| Julia Lawall | 15 | 0.15% | 1 | 1.06% |
| Wolfram Sang | 14 | 0.14% | 2 | 2.13% |
| Tony Jones | 6 | 0.06% | 1 | 1.06% |
| Uwe Kleine-König | 5 | 0.05% | 3 | 3.19% |
| Rudolf Marek | 5 | 0.05% | 1 | 1.06% |
| Laurent Riffard | 5 | 0.05% | 1 | 1.06% |
| Darren Jenkins | 5 | 0.05% | 1 | 1.06% |
| Andrew F. Davis | 4 | 0.04% | 1 | 1.06% |
| Alexey Dobriyan | 3 | 0.03% | 1 | 1.06% |
| Paul Fertser | 3 | 0.03% | 1 | 1.06% |
| Stephen Kitt | 3 | 0.03% | 1 | 1.06% |
| Gustavo A. R. Silva | 2 | 0.02% | 1 | 1.06% |
| Rusty Russell | 2 | 0.02% | 1 | 1.06% |
| Thomas Gleixner | 2 | 0.02% | 1 | 1.06% |
| Grant Coady | 1 | 0.01% | 1 | 1.06% |
| H Hartley Sweeten | 1 | 0.01% | 1 | 1.06% |
| OGAWA Hirofumi | 1 | 0.01% | 1 | 1.06% |
| Total | 9761 | 94 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * w83781d.c - Part of lm_sensors, Linux kernel modules for hardware * monitoring * Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>, * Philip Edelbrock <phil@netroedge.com>, * and Mark Studebaker <mdsxyz123@yahoo.com> * Copyright (c) 2007 - 2008 Jean Delvare <jdelvare@suse.de> */ /* * Supports following chips: * * Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA * as99127f 7 3 0 3 0x31 0x12c3 yes no * as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no * w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes * w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes * w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no * */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/module.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/jiffies.h> #include <linux/i2c.h> #include <linux/hwmon.h> #include <linux/hwmon-vid.h> #include <linux/hwmon-sysfs.h> #include <linux/sysfs.h> #include <linux/err.h> #include <linux/mutex.h> #ifdef CONFIG_ISA #include <linux/platform_device.h> #include <linux/ioport.h> #include <linux/io.h> #endif #include "lm75.h" /* Addresses to scan */ static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; enum chips { w83781d, w83782d, w83783s, as99127f }; /* Insmod parameters */ static unsigned short force_subclients[4]; module_param_array(force_subclients, short, NULL, 0); MODULE_PARM_DESC(force_subclients, "List of subclient addresses: {bus, clientaddr, subclientaddr1, subclientaddr2}"); static bool reset; module_param(reset, bool, 0); MODULE_PARM_DESC(reset, "Set to one to reset chip on load"); static bool init = 1; module_param(init, bool, 0); MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization"); /* Constants specified below */ /* Length of ISA address segment */ #define W83781D_EXTENT 8 /* Where are the ISA address/data registers relative to the base address */ #define W83781D_ADDR_REG_OFFSET 5 #define W83781D_DATA_REG_OFFSET 6 /* The device registers */ /* in nr from 0 to 8 */ #define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \ (0x554 + (((nr) - 7) * 2))) #define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \ (0x555 + (((nr) - 7) * 2))) #define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \ (0x550 + (nr) - 7)) /* fan nr from 0 to 2 */ #define W83781D_REG_FAN_MIN(nr) (0x3b + (nr)) #define W83781D_REG_FAN(nr) (0x28 + (nr)) #define W83781D_REG_BANK 0x4E #define W83781D_REG_TEMP2_CONFIG 0x152 #define W83781D_REG_TEMP3_CONFIG 0x252 /* temp nr from 1 to 3 */ #define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \ ((nr == 2) ? (0x0150) : \ (0x27))) #define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \ ((nr == 2) ? (0x153) : \ (0x3A))) #define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \ ((nr == 2) ? (0x155) : \ (0x39))) #define W83781D_REG_CONFIG 0x40 /* Interrupt status (W83781D, AS99127F) */ #define W83781D_REG_ALARM1 0x41 #define W83781D_REG_ALARM2 0x42 /* Real-time status (W83782D, W83783S) */ #define W83782D_REG_ALARM1 0x459 #define W83782D_REG_ALARM2 0x45A #define W83782D_REG_ALARM3 0x45B #define W83781D_REG_BEEP_CONFIG 0x4D #define W83781D_REG_BEEP_INTS1 0x56 #define W83781D_REG_BEEP_INTS2 0x57 #define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */ #define W83781D_REG_VID_FANDIV 0x47 #define W83781D_REG_CHIPID 0x49 #define W83781D_REG_WCHIPID 0x58 #define W83781D_REG_CHIPMAN 0x4F #define W83781D_REG_PIN 0x4B /* 782D/783S only */ #define W83781D_REG_VBAT 0x5D /* PWM 782D (1-4) and 783S (1-2) only */ static const u8 W83781D_REG_PWM[] = { 0x5B, 0x5A, 0x5E, 0x5F }; #define W83781D_REG_PWMCLK12 0x5C #define W83781D_REG_PWMCLK34 0x45C #define W83781D_REG_I2C_ADDR 0x48 #define W83781D_REG_I2C_SUBADDR 0x4A /* * The following are undocumented in the data sheets however we * received the information in an email from Winbond tech support */ /* Sensor selection - not on 781d */ #define W83781D_REG_SCFG1 0x5D static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 }; #define W83781D_REG_SCFG2 0x59 static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 }; #define W83781D_DEFAULT_BETA 3435 /* Conversions */ #define IN_TO_REG(val) clamp_val(((val) + 8) / 16, 0, 255) #define IN_FROM_REG(val) ((val) * 16) static inline u8 FAN_TO_REG(long rpm, int div) { if (rpm == 0) return 255; rpm = clamp_val(rpm, 1, 1000000); return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254); } static inline long FAN_FROM_REG(u8 val, int div) { if (val == 0) return -1; if (val == 255) return 0; return 1350000 / (val * div); } #define TEMP_TO_REG(val) clamp_val((val) / 1000, -127, 128) #define TEMP_FROM_REG(val) ((val) * 1000) #define BEEP_MASK_FROM_REG(val, type) ((type) == as99127f ? \ (~(val)) & 0x7fff : (val) & 0xff7fff) #define BEEP_MASK_TO_REG(val, type) ((type) == as99127f ? \ (~(val)) & 0x7fff : (val) & 0xff7fff) #define DIV_FROM_REG(val) (1 << (val)) static inline u8 DIV_TO_REG(long val, enum chips type) { int i; val = clamp_val(val, 1, ((type == w83781d || type == as99127f) ? 8 : 128)) >> 1; for (i = 0; i < 7; i++) { if (val == 0) break; val >>= 1; } return i; } struct w83781d_data { struct i2c_client *client; struct device *hwmon_dev; struct mutex lock; enum chips type; /* For ISA device only */ const char *name; int isa_addr; struct mutex update_lock; bool valid; /* true if following fields are valid */ unsigned long last_updated; /* In jiffies */ struct i2c_client *lm75[2]; /* for secondary I2C addresses */ /* array of 2 pointers to subclients */ u8 in[9]; /* Register value - 8 & 9 for 782D only */ u8 in_max[9]; /* Register value - 8 & 9 for 782D only */ u8 in_min[9]; /* Register value - 8 & 9 for 782D only */ u8 fan[3]; /* Register value */ u8 fan_min[3]; /* Register value */ s8 temp; /* Register value */ s8 temp_max; /* Register value */ s8 temp_max_hyst; /* Register value */ u16 temp_add[2]; /* Register value */ u16 temp_max_add[2]; /* Register value */ u16 temp_max_hyst_add[2]; /* Register value */ u8 fan_div[3]; /* Register encoding, shifted right */ u8 vid; /* Register encoding, combined */ u32 alarms; /* Register encoding, combined */ u32 beep_mask; /* Register encoding, combined */ u8 pwm[4]; /* Register value */ u8 pwm2_enable; /* Boolean */ u16 sens[3]; /* * 782D/783S only. * 1 = pentium diode; 2 = 3904 diode; * 4 = thermistor */ u8 vrm; }; static struct w83781d_data *w83781d_data_if_isa(void); static int w83781d_alias_detect(struct i2c_client *client, u8 chipid); static int w83781d_read_value(struct w83781d_data *data, u16 reg); static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value); static struct w83781d_data *w83781d_update_device(struct device *dev); static void w83781d_init_device(struct device *dev); /* following are the sysfs callback functions */ #define show_in_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \ char *buf) \ { \ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ struct w83781d_data *data = w83781d_update_device(dev); \ return sprintf(buf, "%ld\n", \ (long)IN_FROM_REG(data->reg[attr->index])); \ } show_in_reg(in); show_in_reg(in_min); show_in_reg(in_max); #define store_in_reg(REG, reg) \ static ssize_t store_in_##reg(struct device *dev, struct device_attribute \ *da, const char *buf, size_t count) \ { \ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ struct w83781d_data *data = dev_get_drvdata(dev); \ int nr = attr->index; \ unsigned long val; \ int err = kstrtoul(buf, 10, &val); \ if (err) \ return err; \ mutex_lock(&data->update_lock); \ data->in_##reg[nr] = IN_TO_REG(val); \ w83781d_write_value(data, W83781D_REG_IN_##REG(nr), \ data->in_##reg[nr]); \ \ mutex_unlock(&data->update_lock); \ return count; \ } store_in_reg(MIN, min); store_in_reg(MAX, max); #define sysfs_in_offsets(offset) \ static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ show_in, NULL, offset); \ static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ show_in_min, store_in_min, offset); \ static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ show_in_max, store_in_max, offset) sysfs_in_offsets(0); sysfs_in_offsets(1); sysfs_in_offsets(2); sysfs_in_offsets(3); sysfs_in_offsets(4); sysfs_in_offsets(5); sysfs_in_offsets(6); sysfs_in_offsets(7); sysfs_in_offsets(8); #define show_fan_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \ char *buf) \ { \ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ struct w83781d_data *data = w83781d_update_device(dev); \ return sprintf(buf, "%ld\n", \ FAN_FROM_REG(data->reg[attr->index], \ DIV_FROM_REG(data->fan_div[attr->index]))); \ } show_fan_reg(fan); show_fan_reg(fan_min); static ssize_t store_fan_min(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = dev_get_drvdata(dev); int nr = attr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR, show_fan_min, store_fan_min, 0); static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR, show_fan_min, store_fan_min, 1); static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2); static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR, show_fan_min, store_fan_min, 2); #define show_temp_reg(reg) \ static ssize_t show_##reg(struct device *dev, struct device_attribute *da, \ char *buf) \ { \ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ struct w83781d_data *data = w83781d_update_device(dev); \ int nr = attr->index; \ if (nr >= 2) { /* TEMP2 and TEMP3 */ \ return sprintf(buf, "%d\n", \ LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \ } else { /* TEMP1 */ \ return sprintf(buf, "%ld\n", (long)TEMP_FROM_REG(data->reg)); \ } \ } show_temp_reg(temp); show_temp_reg(temp_max); show_temp_reg(temp_max_hyst); #define store_temp_reg(REG, reg) \ static ssize_t store_temp_##reg(struct device *dev, \ struct device_attribute *da, const char *buf, size_t count) \ { \ struct sensor_device_attribute *attr = to_sensor_dev_attr(da); \ struct w83781d_data *data = dev_get_drvdata(dev); \ int nr = attr->index; \ long val; \ int err = kstrtol(buf, 10, &val); \ if (err) \ return err; \ mutex_lock(&data->update_lock); \ \ if (nr >= 2) { /* TEMP2 and TEMP3 */ \ data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \ w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \ data->temp_##reg##_add[nr-2]); \ } else { /* TEMP1 */ \ data->temp_##reg = TEMP_TO_REG(val); \ w83781d_write_value(data, W83781D_REG_TEMP_##REG(nr), \ data->temp_##reg); \ } \ \ mutex_unlock(&data->update_lock); \ return count; \ } store_temp_reg(OVER, max); store_temp_reg(HYST, max_hyst); #define sysfs_temp_offsets(offset) \ static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ show_temp, NULL, offset); \ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ show_temp_max, store_temp_max, offset); \ static SENSOR_DEVICE_ATTR(temp##offset##_max_hyst, S_IRUGO | S_IWUSR, \ show_temp_max_hyst, store_temp_max_hyst, offset); sysfs_temp_offsets(1); sysfs_temp_offsets(2); sysfs_temp_offsets(3); static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); } static DEVICE_ATTR_RO(cpu0_vid); static ssize_t vrm_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = dev_get_drvdata(dev); return sprintf(buf, "%ld\n", (long) data->vrm); } static ssize_t vrm_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83781d_data *data = dev_get_drvdata(dev); unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; data->vrm = clamp_val(val, 0, 255); return count; } static DEVICE_ATTR_RW(vrm); static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%u\n", data->alarms); } static DEVICE_ATTR_RO(alarms); static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); int bitnr = to_sensor_dev_attr(attr)->index; return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } /* The W83781D has a single alarm bit for temp2 and temp3 */ static ssize_t show_temp3_alarm(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); int bitnr = (data->type == w83781d) ? 5 : 13; return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1); } static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3); static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8); static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9); static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 10); static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 16); static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 17); static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 6); static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 7); static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 11); static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 4); static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 5); static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_temp3_alarm, NULL, 0); static ssize_t beep_mask_show(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%ld\n", (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type)); } static ssize_t beep_mask_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83781d_data *data = dev_get_drvdata(dev); unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); data->beep_mask &= 0x8000; /* preserve beep enable */ data->beep_mask |= BEEP_MASK_TO_REG(val, data->type); w83781d_write_value(data, W83781D_REG_BEEP_INTS1, data->beep_mask & 0xff); w83781d_write_value(data, W83781D_REG_BEEP_INTS2, (data->beep_mask >> 8) & 0xff); if (data->type != w83781d && data->type != as99127f) { w83781d_write_value(data, W83781D_REG_BEEP_INTS3, ((data->beep_mask) >> 16) & 0xff); } mutex_unlock(&data->update_lock); return count; } static DEVICE_ATTR_RW(beep_mask); static ssize_t show_beep(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); int bitnr = to_sensor_dev_attr(attr)->index; return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1); } static ssize_t store_beep(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct w83781d_data *data = dev_get_drvdata(dev); int bitnr = to_sensor_dev_attr(attr)->index; u8 reg; unsigned long bit; int err; err = kstrtoul(buf, 10, &bit); if (err) return err; if (bit & ~1) return -EINVAL; mutex_lock(&data->update_lock); if (bit) data->beep_mask |= (1 << bitnr); else data->beep_mask &= ~(1 << bitnr); if (bitnr < 8) { reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS1); if (bit) reg |= (1 << bitnr); else reg &= ~(1 << bitnr); w83781d_write_value(data, W83781D_REG_BEEP_INTS1, reg); } else if (bitnr < 16) { reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS2); if (bit) reg |= (1 << (bitnr - 8)); else reg &= ~(1 << (bitnr - 8)); w83781d_write_value(data, W83781D_REG_BEEP_INTS2, reg); } else { reg = w83781d_read_value(data, W83781D_REG_BEEP_INTS3); if (bit) reg |= (1 << (bitnr - 16)); else reg &= ~(1 << (bitnr - 16)); w83781d_write_value(data, W83781D_REG_BEEP_INTS3, reg); } mutex_unlock(&data->update_lock); return count; } /* The W83781D has a single beep bit for temp2 and temp3 */ static ssize_t show_temp3_beep(struct device *dev, struct device_attribute *attr, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); int bitnr = (data->type == w83781d) ? 5 : 13; return sprintf(buf, "%u\n", (data->beep_mask >> bitnr) & 1); } static SENSOR_DEVICE_ATTR(in0_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 0); static SENSOR_DEVICE_ATTR(in1_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 1); static SENSOR_DEVICE_ATTR(in2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 2); static SENSOR_DEVICE_ATTR(in3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 3); static SENSOR_DEVICE_ATTR(in4_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 8); static SENSOR_DEVICE_ATTR(in5_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 9); static SENSOR_DEVICE_ATTR(in6_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 10); static SENSOR_DEVICE_ATTR(in7_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 16); static SENSOR_DEVICE_ATTR(in8_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 17); static SENSOR_DEVICE_ATTR(fan1_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 6); static SENSOR_DEVICE_ATTR(fan2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 7); static SENSOR_DEVICE_ATTR(fan3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 11); static SENSOR_DEVICE_ATTR(temp1_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 4); static SENSOR_DEVICE_ATTR(temp2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep, 5); static SENSOR_DEVICE_ATTR(temp3_beep, S_IRUGO, show_temp3_beep, store_beep, 13); static SENSOR_DEVICE_ATTR(beep_enable, S_IRUGO | S_IWUSR, show_beep, store_beep, 15); static ssize_t show_fan_div(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%ld\n", (long) DIV_FROM_REG(data->fan_div[attr->index])); } /* * Note: we save and restore the fan minimum here, because its value is * determined in part by the fan divisor. This follows the principle of * least surprise; the user doesn't expect the fan minimum to change just * because the divisor changed. */ static ssize_t store_fan_div(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = dev_get_drvdata(dev); unsigned long min; int nr = attr->index; u8 reg; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); /* Save fan_min */ min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); data->fan_div[nr] = DIV_TO_REG(val, data->type); reg = (w83781d_read_value(data, nr == 2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV) & (nr == 0 ? 0xcf : 0x3f)) | ((data->fan_div[nr] & 0x03) << (nr == 0 ? 4 : 6)); w83781d_write_value(data, nr == 2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg); /* w83781d and as99127f don't have extended divisor bits */ if (data->type != w83781d && data->type != as99127f) { reg = (w83781d_read_value(data, W83781D_REG_VBAT) & ~(1 << (5 + nr))) | ((data->fan_div[nr] & 0x04) << (3 + nr)); w83781d_write_value(data, W83781D_REG_VBAT, reg); } /* Restore fan_min */ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); w83781d_write_value(data, W83781D_REG_FAN_MIN(nr), data->fan_min[nr]); mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR(fan1_div, S_IRUGO | S_IWUSR, show_fan_div, store_fan_div, 0); static SENSOR_DEVICE_ATTR(fan2_div, S_IRUGO | S_IWUSR, show_fan_div, store_fan_div, 1); static SENSOR_DEVICE_ATTR(fan3_div, S_IRUGO | S_IWUSR, show_fan_div, store_fan_div, 2); static ssize_t show_pwm(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%d\n", (int)data->pwm[attr->index]); } static ssize_t pwm2_enable_show(struct device *dev, struct device_attribute *da, char *buf) { struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%d\n", (int)data->pwm2_enable); } static ssize_t store_pwm(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = dev_get_drvdata(dev); int nr = attr->index; unsigned long val; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); data->pwm[nr] = clamp_val(val, 0, 255); w83781d_write_value(data, W83781D_REG_PWM[nr], data->pwm[nr]); mutex_unlock(&data->update_lock); return count; } static ssize_t pwm2_enable_store(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct w83781d_data *data = dev_get_drvdata(dev); unsigned long val; u32 reg; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); switch (val) { case 0: case 1: reg = w83781d_read_value(data, W83781D_REG_PWMCLK12); w83781d_write_value(data, W83781D_REG_PWMCLK12, (reg & 0xf7) | (val << 3)); reg = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG); w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, (reg & 0xef) | (!val << 4)); data->pwm2_enable = val; break; default: mutex_unlock(&data->update_lock); return -EINVAL; } mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 0); static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 1); static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 2); static SENSOR_DEVICE_ATTR(pwm4, S_IRUGO | S_IWUSR, show_pwm, store_pwm, 3); /* only PWM2 can be enabled/disabled */ static DEVICE_ATTR_RW(pwm2_enable); static ssize_t show_sensor(struct device *dev, struct device_attribute *da, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = w83781d_update_device(dev); return sprintf(buf, "%d\n", (int)data->sens[attr->index]); } static ssize_t store_sensor(struct device *dev, struct device_attribute *da, const char *buf, size_t count) { struct sensor_device_attribute *attr = to_sensor_dev_attr(da); struct w83781d_data *data = dev_get_drvdata(dev); int nr = attr->index; unsigned long val; u32 tmp; int err; err = kstrtoul(buf, 10, &val); if (err) return err; mutex_lock(&data->update_lock); switch (val) { case 1: /* PII/Celeron diode */ tmp = w83781d_read_value(data, W83781D_REG_SCFG1); w83781d_write_value(data, W83781D_REG_SCFG1, tmp | BIT_SCFG1[nr]); tmp = w83781d_read_value(data, W83781D_REG_SCFG2); w83781d_write_value(data, W83781D_REG_SCFG2, tmp | BIT_SCFG2[nr]); data->sens[nr] = val; break; case 2: /* 3904 */ tmp = w83781d_read_value(data, W83781D_REG_SCFG1); w83781d_write_value(data, W83781D_REG_SCFG1, tmp | BIT_SCFG1[nr]); tmp = w83781d_read_value(data, W83781D_REG_SCFG2); w83781d_write_value(data, W83781D_REG_SCFG2, tmp & ~BIT_SCFG2[nr]); data->sens[nr] = val; break; case W83781D_DEFAULT_BETA: dev_warn(dev, "Sensor type %d is deprecated, please use 4 instead\n", W83781D_DEFAULT_BETA); fallthrough; case 4: /* thermistor */ tmp = w83781d_read_value(data, W83781D_REG_SCFG1); w83781d_write_value(data, W83781D_REG_SCFG1, tmp & ~BIT_SCFG1[nr]); data->sens[nr] = val; break; default: dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or 4\n", (long) val); break; } mutex_unlock(&data->update_lock); return count; } static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO | S_IWUSR, show_sensor, store_sensor, 0); static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO | S_IWUSR, show_sensor, store_sensor, 1); static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO | S_IWUSR, show_sensor, store_sensor, 2); /* * Assumes that adapter is of I2C, not ISA variety. * OTHERWISE DON'T CALL THIS */ static int w83781d_detect_subclients(struct i2c_client *new_client) { int i, val1 = 0, id; int err; int address = new_client->addr; unsigned short sc_addr[2]; struct i2c_adapter *adapter = new_client->adapter; struct w83781d_data *data = i2c_get_clientdata(new_client); enum chips kind = data->type; int num_sc = 1; id = i2c_adapter_id(adapter); if (force_subclients[0] == id && force_subclients[1] == address) { for (i = 2; i <= 3; i++) { if (force_subclients[i] < 0x48 || force_subclients[i] > 0x4f) { dev_err(&new_client->dev, "Invalid subclient address %d; must be 0x48-0x4f\n", force_subclients[i]); err = -EINVAL; goto ERROR_SC_1; } } w83781d_write_value(data, W83781D_REG_I2C_SUBADDR, (force_subclients[2] & 0x07) | ((force_subclients[3] & 0x07) << 4)); sc_addr[0] = force_subclients[2]; } else { val1 = w83781d_read_value(data, W83781D_REG_I2C_SUBADDR); sc_addr[0] = 0x48 + (val1 & 0x07); } if (kind != w83783s) { num_sc = 2; if (force_subclients[0] == id && force_subclients[1] == address) { sc_addr[1] = force_subclients[3]; } else { sc_addr[1] = 0x48 + ((val1 >> 4) & 0x07); } if (sc_addr[0] == sc_addr[1]) { dev_err(&new_client->dev, "Duplicate addresses 0x%x for subclients.\n", sc_addr[0]); err = -EBUSY; goto ERROR_SC_2; } } for (i = 0; i < num_sc; i++) { data->lm75[i] = i2c_new_dummy_device(adapter, sc_addr[i]); if (IS_ERR(data->lm75[i])) { dev_err(&new_client->dev, "Subclient %d registration at address 0x%x failed.\n", i, sc_addr[i]); err = PTR_ERR(data->lm75[i]); if (i == 1) goto ERROR_SC_3; goto ERROR_SC_2; } } return 0; /* Undo inits in case of errors */ ERROR_SC_3: i2c_unregister_device(data->lm75[0]); ERROR_SC_2: ERROR_SC_1: return err; } #define IN_UNIT_ATTRS(X) \ &sensor_dev_attr_in##X##_input.dev_attr.attr, \ &sensor_dev_attr_in##X##_min.dev_attr.attr, \ &sensor_dev_attr_in##X##_max.dev_attr.attr, \ &sensor_dev_attr_in##X##_alarm.dev_attr.attr, \ &sensor_dev_attr_in##X##_beep.dev_attr.attr #define FAN_UNIT_ATTRS(X) \ &sensor_dev_attr_fan##X##_input.dev_attr.attr, \ &sensor_dev_attr_fan##X##_min.dev_attr.attr, \ &sensor_dev_attr_fan##X##_div.dev_attr.attr, \ &sensor_dev_attr_fan##X##_alarm.dev_attr.attr, \ &sensor_dev_attr_fan##X##_beep.dev_attr.attr #define TEMP_UNIT_ATTRS(X) \ &sensor_dev_attr_temp##X##_input.dev_attr.attr, \ &sensor_dev_attr_temp##X##_max.dev_attr.attr, \ &sensor_dev_attr_temp##X##_max_hyst.dev_attr.attr, \ &sensor_dev_attr_temp##X##_alarm.dev_attr.attr, \ &sensor_dev_attr_temp##X##_beep.dev_attr.attr static struct attribute *w83781d_attributes[] = { IN_UNIT_ATTRS(0), IN_UNIT_ATTRS(2), IN_UNIT_ATTRS(3), IN_UNIT_ATTRS(4), IN_UNIT_ATTRS(5), IN_UNIT_ATTRS(6), FAN_UNIT_ATTRS(1), FAN_UNIT_ATTRS(2), FAN_UNIT_ATTRS(3), TEMP_UNIT_ATTRS(1), TEMP_UNIT_ATTRS(2), &dev_attr_cpu0_vid.attr, &dev_attr_vrm.attr, &dev_attr_alarms.attr, &dev_attr_beep_mask.attr, &sensor_dev_attr_beep_enable.dev_attr.attr, NULL }; static const struct attribute_group w83781d_group = { .attrs = w83781d_attributes, }; static struct attribute *w83781d_attributes_in1[] = { IN_UNIT_ATTRS(1), NULL }; static const struct attribute_group w83781d_group_in1 = { .attrs = w83781d_attributes_in1, }; static struct attribute *w83781d_attributes_in78[] = { IN_UNIT_ATTRS(7), IN_UNIT_ATTRS(8), NULL }; static const struct attribute_group w83781d_group_in78 = { .attrs = w83781d_attributes_in78, }; static struct attribute *w83781d_attributes_temp3[] = { TEMP_UNIT_ATTRS(3), NULL }; static const struct attribute_group w83781d_group_temp3 = { .attrs = w83781d_attributes_temp3, }; static struct attribute *w83781d_attributes_pwm12[] = { &sensor_dev_attr_pwm1.dev_attr.attr, &sensor_dev_attr_pwm2.dev_attr.attr, &dev_attr_pwm2_enable.attr, NULL }; static const struct attribute_group w83781d_group_pwm12 = { .attrs = w83781d_attributes_pwm12, }; static struct attribute *w83781d_attributes_pwm34[] = { &sensor_dev_attr_pwm3.dev_attr.attr, &sensor_dev_attr_pwm4.dev_attr.attr, NULL }; static const struct attribute_group w83781d_group_pwm34 = { .attrs = w83781d_attributes_pwm34, }; static struct attribute *w83781d_attributes_other[] = { &sensor_dev_attr_temp1_type.dev_attr.attr, &sensor_dev_attr_temp2_type.dev_attr.attr, &sensor_dev_attr_temp3_type.dev_attr.attr, NULL }; static const struct attribute_group w83781d_group_other = { .attrs = w83781d_attributes_other, }; /* No clean up is done on error, it's up to the caller */ static int w83781d_create_files(struct device *dev, int kind, int is_isa) { int err; err = sysfs_create_group(&dev->kobj, &w83781d_group); if (err) return err; if (kind != w83783s) { err = sysfs_create_group(&dev->kobj, &w83781d_group_in1); if (err) return err; } if (kind != as99127f && kind != w83781d && kind != w83783s) { err = sysfs_create_group(&dev->kobj, &w83781d_group_in78); if (err) return err; } if (kind != w83783s) { err = sysfs_create_group(&dev->kobj, &w83781d_group_temp3); if (err) return err; if (kind != w83781d) { err = sysfs_chmod_file(&dev->kobj, &sensor_dev_attr_temp3_alarm.dev_attr.attr, S_IRUGO | S_IWUSR); if (err) return err; } } if (kind != w83781d && kind != as99127f) { err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm12); if (err) return err; } if (kind == w83782d && !is_isa) { err = sysfs_create_group(&dev->kobj, &w83781d_group_pwm34); if (err) return err; } if (kind != as99127f && kind != w83781d) { err = device_create_file(dev, &sensor_dev_attr_temp1_type.dev_attr); if (err) return err; err = device_create_file(dev, &sensor_dev_attr_temp2_type.dev_attr); if (err) return err; if (kind != w83783s) { err = device_create_file(dev, &sensor_dev_attr_temp3_type.dev_attr); if (err) return err; } } return 0; } /* Return 0 if detection is successful, -ENODEV otherwise */ static int w83781d_detect(struct i2c_client *client, struct i2c_board_info *info) { int val1, val2; struct w83781d_data *isa = w83781d_data_if_isa(); struct i2c_adapter *adapter = client->adapter; int address = client->addr; const char *client_name; enum vendor { winbond, asus } vendid; if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) return -ENODEV; /* * We block updates of the ISA device to minimize the risk of * concurrent access to the same W83781D chip through different * interfaces. */ if (isa) mutex_lock(&isa->update_lock); if (i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG) & 0x80) { dev_dbg(&adapter->dev, "Detection of w83781d chip failed at step 3\n"); goto err_nodev; } val1 = i2c_smbus_read_byte_data(client, W83781D_REG_BANK); val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); /* Check for Winbond or Asus ID if in bank 0 */ if (!(val1 & 0x07) && ((!(val1 & 0x80) && val2 != 0xa3 && val2 != 0xc3) || ((val1 & 0x80) && val2 != 0x5c && val2 != 0x12))) { dev_dbg(&adapter->dev, "Detection of w83781d chip failed at step 4\n"); goto err_nodev; } /* * If Winbond SMBus, check address at 0x48. * Asus doesn't support, except for as99127f rev.2 */ if ((!(val1 & 0x80) && val2 == 0xa3) || ((val1 & 0x80) && val2 == 0x5c)) { if (i2c_smbus_read_byte_data(client, W83781D_REG_I2C_ADDR) != address) { dev_dbg(&adapter->dev, "Detection of w83781d chip failed at step 5\n"); goto err_nodev; } } /* Put it now into bank 0 and Vendor ID High Byte */ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, (i2c_smbus_read_byte_data(client, W83781D_REG_BANK) & 0x78) | 0x80); /* Get the vendor ID */ val2 = i2c_smbus_read_byte_data(client, W83781D_REG_CHIPMAN); if (val2 == 0x5c) vendid = winbond; else if (val2 == 0x12) vendid = asus; else { dev_dbg(&adapter->dev, "w83781d chip vendor is neither Winbond nor Asus\n"); goto err_nodev; } /* Determine the chip type. */ val1 = i2c_smbus_read_byte_data(client, W83781D_REG_WCHIPID); if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond) client_name = "w83781d"; else if (val1 == 0x30 && vendid == winbond) client_name = "w83782d"; else if (val1 == 0x40 && vendid == winbond && address == 0x2d) client_name = "w83783s"; else if (val1 == 0x31) client_name = "as99127f"; else goto err_nodev; if (val1 <= 0x30 && w83781d_alias_detect(client, val1)) { dev_dbg(&adapter->dev, "Device at 0x%02x appears to be the same as ISA device\n", address); goto err_nodev; } if (isa) mutex_unlock(&isa->update_lock); strscpy(info->type, client_name, I2C_NAME_SIZE); return 0; err_nodev: if (isa) mutex_unlock(&isa->update_lock); return -ENODEV; } static void w83781d_remove_files(struct device *dev) { sysfs_remove_group(&dev->kobj, &w83781d_group); sysfs_remove_group(&dev->kobj, &w83781d_group_in1); sysfs_remove_group(&dev->kobj, &w83781d_group_in78); sysfs_remove_group(&dev->kobj, &w83781d_group_temp3); sysfs_remove_group(&dev->kobj, &w83781d_group_pwm12); sysfs_remove_group(&dev->kobj, &w83781d_group_pwm34); sysfs_remove_group(&dev->kobj, &w83781d_group_other); } static int w83781d_probe(struct i2c_client *client) { struct device *dev = &client->dev; struct w83781d_data *data; int err; data = devm_kzalloc(dev, sizeof(struct w83781d_data), GFP_KERNEL); if (!data) return -ENOMEM; i2c_set_clientdata(client, data); mutex_init(&data->lock); mutex_init(&data->update_lock); data->type = (uintptr_t)i2c_get_match_data(client); data->client = client; /* attach secondary i2c lm75-like clients */ err = w83781d_detect_subclients(client); if (err) return err; /* Initialize the chip */ w83781d_init_device(dev); /* Register sysfs hooks */ err = w83781d_create_files(dev, data->type, 0); if (err) goto exit_remove_files; data->hwmon_dev = hwmon_device_register(dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove_files; } return 0; exit_remove_files: w83781d_remove_files(dev); i2c_unregister_device(data->lm75[0]); i2c_unregister_device(data->lm75[1]); return err; } static void w83781d_remove(struct i2c_client *client) { struct w83781d_data *data = i2c_get_clientdata(client); struct device *dev = &client->dev; hwmon_device_unregister(data->hwmon_dev); w83781d_remove_files(dev); i2c_unregister_device(data->lm75[0]); i2c_unregister_device(data->lm75[1]); } static int w83781d_read_value_i2c(struct w83781d_data *data, u16 reg) { struct i2c_client *client = data->client; int res, bank; struct i2c_client *cl; bank = (reg >> 8) & 0x0f; if (bank > 2) /* switch banks */ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, bank); if (bank == 0 || bank > 2) { res = i2c_smbus_read_byte_data(client, reg & 0xff); } else { /* switch to subclient */ cl = data->lm75[bank - 1]; /* convert from ISA to LM75 I2C addresses */ switch (reg & 0xff) { case 0x50: /* TEMP */ res = i2c_smbus_read_word_swapped(cl, 0); break; case 0x52: /* CONFIG */ res = i2c_smbus_read_byte_data(cl, 1); break; case 0x53: /* HYST */ res = i2c_smbus_read_word_swapped(cl, 2); break; case 0x55: /* OVER */ default: res = i2c_smbus_read_word_swapped(cl, 3); break; } } if (bank > 2) i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); return res; } static int w83781d_write_value_i2c(struct w83781d_data *data, u16 reg, u16 value) { struct i2c_client *client = data->client; int bank; struct i2c_client *cl; bank = (reg >> 8) & 0x0f; if (bank > 2) /* switch banks */ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, bank); if (bank == 0 || bank > 2) { i2c_smbus_write_byte_data(client, reg & 0xff, value & 0xff); } else { /* switch to subclient */ cl = data->lm75[bank - 1]; /* convert from ISA to LM75 I2C addresses */ switch (reg & 0xff) { case 0x52: /* CONFIG */ i2c_smbus_write_byte_data(cl, 1, value & 0xff); break; case 0x53: /* HYST */ i2c_smbus_write_word_swapped(cl, 2, value); break; case 0x55: /* OVER */ i2c_smbus_write_word_swapped(cl, 3, value); break; } } if (bank > 2) i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0); return 0; } static void w83781d_init_device(struct device *dev) { struct w83781d_data *data = dev_get_drvdata(dev); int i, p; int type = data->type; u8 tmp; if (reset && type != as99127f) { /* * this resets registers we don't have * documentation for on the as99127f */ /* * Resetting the chip has been the default for a long time, * but it causes the BIOS initializations (fan clock dividers, * thermal sensor types...) to be lost, so it is now optional. * It might even go away if nobody reports it as being useful, * as I see very little reason why this would be needed at * all. */ dev_info(dev, "If reset=1 solved a problem you were having, please report!\n"); /* save these registers */ i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG); p = w83781d_read_value(data, W83781D_REG_PWMCLK12); /* * Reset all except Watchdog values and last conversion values * This sets fan-divs to 2, among others */ w83781d_write_value(data, W83781D_REG_CONFIG, 0x80); /* * Restore the registers and disable power-on abnormal beep. * This saves FAN 1/2/3 input/output values set by BIOS. */ w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80); w83781d_write_value(data, W83781D_REG_PWMCLK12, p); /* * Disable master beep-enable (reset turns it on). * Individual beep_mask should be reset to off but for some * reason disabling this bit helps some people not get beeped */ w83781d_write_value(data, W83781D_REG_BEEP_INTS2, 0); } /* * Disable power-on abnormal beep, as advised by the datasheet. * Already done if reset=1. */ if (init && !reset && type != as99127f) { i = w83781d_read_value(data, W83781D_REG_BEEP_CONFIG); w83781d_write_value(data, W83781D_REG_BEEP_CONFIG, i | 0x80); } data->vrm = vid_which_vrm(); if ((type != w83781d) && (type != as99127f)) { tmp = w83781d_read_value(data, W83781D_REG_SCFG1); for (i = 1; i <= 3; i++) { if (!(tmp & BIT_SCFG1[i - 1])) { data->sens[i - 1] = 4; } else { if (w83781d_read_value (data, W83781D_REG_SCFG2) & BIT_SCFG2[i - 1]) data->sens[i - 1] = 1; else data->sens[i - 1] = 2; } if (type == w83783s && i == 2) break; } } if (init && type != as99127f) { /* Enable temp2 */ tmp = w83781d_read_value(data, W83781D_REG_TEMP2_CONFIG); if (tmp & 0x01) { dev_warn(dev, "Enabling temp2, readings might not make sense\n"); w83781d_write_value(data, W83781D_REG_TEMP2_CONFIG, tmp & 0xfe); } /* Enable temp3 */ if (type != w83783s) { tmp = w83781d_read_value(data, W83781D_REG_TEMP3_CONFIG); if (tmp & 0x01) { dev_warn(dev, "Enabling temp3, readings might not make sense\n"); w83781d_write_value(data, W83781D_REG_TEMP3_CONFIG, tmp & 0xfe); } } } /* Start monitoring */ w83781d_write_value(data, W83781D_REG_CONFIG, (w83781d_read_value(data, W83781D_REG_CONFIG) & 0xf7) | 0x01); /* A few vars need to be filled upon startup */ for (i = 0; i < 3; i++) { data->fan_min[i] = w83781d_read_value(data, W83781D_REG_FAN_MIN(i)); } mutex_init(&data->update_lock); } static struct w83781d_data *w83781d_update_device(struct device *dev) { struct w83781d_data *data = dev_get_drvdata(dev); struct i2c_client *client = data->client; int i; mutex_lock(&data->update_lock); if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || !data->valid) { dev_dbg(dev, "Starting device update\n"); for (i = 0; i <= 8; i++) { if (data->type == w83783s && i == 1) continue; /* 783S has no in1 */ data->in[i] = w83781d_read_value(data, W83781D_REG_IN(i)); data->in_min[i] = w83781d_read_value(data, W83781D_REG_IN_MIN(i)); data->in_max[i] = w83781d_read_value(data, W83781D_REG_IN_MAX(i)); if ((data->type != w83782d) && (i == 6)) break; } for (i = 0; i < 3; i++) { data->fan[i] = w83781d_read_value(data, W83781D_REG_FAN(i)); data->fan_min[i] = w83781d_read_value(data, W83781D_REG_FAN_MIN(i)); } if (data->type != w83781d && data->type != as99127f) { for (i = 0; i < 4; i++) { data->pwm[i] = w83781d_read_value(data, W83781D_REG_PWM[i]); /* Only W83782D on SMBus has PWM3 and PWM4 */ if ((data->type != w83782d || !client) && i == 1) break; } /* Only PWM2 can be disabled */ data->pwm2_enable = (w83781d_read_value(data, W83781D_REG_PWMCLK12) & 0x08) >> 3; } data->temp = w83781d_read_value(data, W83781D_REG_TEMP(1)); data->temp_max = w83781d_read_value(data, W83781D_REG_TEMP_OVER(1)); data->temp_max_hyst = w83781d_read_value(data, W83781D_REG_TEMP_HYST(1)); data->temp_add[0] = w83781d_read_value(data, W83781D_REG_TEMP(2)); data->temp_max_add[0] = w83781d_read_value(data, W83781D_REG_TEMP_OVER(2)); data->temp_max_hyst_add[0] = w83781d_read_value(data, W83781D_REG_TEMP_HYST(2)); if (data->type != w83783s) { data->temp_add[1] = w83781d_read_value(data, W83781D_REG_TEMP(3)); data->temp_max_add[1] = w83781d_read_value(data, W83781D_REG_TEMP_OVER(3)); data->temp_max_hyst_add[1] = w83781d_read_value(data, W83781D_REG_TEMP_HYST(3)); } i = w83781d_read_value(data, W83781D_REG_VID_FANDIV); data->vid = i & 0x0f; data->vid |= (w83781d_read_value(data, W83781D_REG_CHIPID) & 0x01) << 4; data->fan_div[0] = (i >> 4) & 0x03; data->fan_div[1] = (i >> 6) & 0x03; data->fan_div[2] = (w83781d_read_value(data, W83781D_REG_PIN) >> 6) & 0x03; if ((data->type != w83781d) && (data->type != as99127f)) { i = w83781d_read_value(data, W83781D_REG_VBAT); data->fan_div[0] |= (i >> 3) & 0x04; data->fan_div[1] |= (i >> 4) & 0x04; data->fan_div[2] |= (i >> 5) & 0x04; } if (data->type == w83782d) { data->alarms = w83781d_read_value(data, W83782D_REG_ALARM1) | (w83781d_read_value(data, W83782D_REG_ALARM2) << 8) | (w83781d_read_value(data, W83782D_REG_ALARM3) << 16); } else if (data->type == w83783s) { data->alarms = w83781d_read_value(data, W83782D_REG_ALARM1) | (w83781d_read_value(data, W83782D_REG_ALARM2) << 8); } else { /* * No real-time status registers, fall back to * interrupt status registers */ data->alarms = w83781d_read_value(data, W83781D_REG_ALARM1) | (w83781d_read_value(data, W83781D_REG_ALARM2) << 8); } i = w83781d_read_value(data, W83781D_REG_BEEP_INTS2); data->beep_mask = (i << 8) + w83781d_read_value(data, W83781D_REG_BEEP_INTS1); if ((data->type != w83781d) && (data->type != as99127f)) { data->beep_mask |= w83781d_read_value(data, W83781D_REG_BEEP_INTS3) << 16; } data->last_updated = jiffies; data->valid = true; } mutex_unlock(&data->update_lock); return data; } static const struct i2c_device_id w83781d_ids[] = { { "w83781d", w83781d, }, { "w83782d", w83782d, }, { "w83783s", w83783s, }, { "as99127f", as99127f }, { /* LIST END */ } }; MODULE_DEVICE_TABLE(i2c, w83781d_ids); static const struct of_device_id w83781d_of_match[] = { { .compatible = "winbond,w83781d" }, { .compatible = "winbond,w83781g" }, { .compatible = "winbond,w83782d" }, { .compatible = "winbond,w83783s" }, { .compatible = "asus,as99127f" }, { }, }; MODULE_DEVICE_TABLE(of, w83781d_of_match); static struct i2c_driver w83781d_driver = { .class = I2C_CLASS_HWMON, .driver = { .name = "w83781d", .of_match_table = w83781d_of_match, }, .probe = w83781d_probe, .remove = w83781d_remove, .id_table = w83781d_ids, .detect = w83781d_detect, .address_list = normal_i2c, }; /* * ISA related code */ #ifdef CONFIG_ISA /* ISA device, if found */ static struct platform_device *pdev; static unsigned short isa_address = 0x290; /* * I2C devices get this name attribute automatically, but for ISA devices * we must create it by ourselves. */ static ssize_t name_show(struct device *dev, struct device_attribute *devattr, char *buf) { struct w83781d_data *data = dev_get_drvdata(dev); return sprintf(buf, "%s\n", data->name); } static DEVICE_ATTR_RO(name); static struct w83781d_data *w83781d_data_if_isa(void) { return pdev ? platform_get_drvdata(pdev) : NULL; } /* Returns 1 if the I2C chip appears to be an alias of the ISA chip */ static int w83781d_alias_detect(struct i2c_client *client, u8 chipid) { struct w83781d_data *isa; int i; if (!pdev) /* No ISA chip */ return 0; isa = platform_get_drvdata(pdev); if (w83781d_read_value(isa, W83781D_REG_I2C_ADDR) != client->addr) return 0; /* Address doesn't match */ if (w83781d_read_value(isa, W83781D_REG_WCHIPID) != chipid) return 0; /* Chip type doesn't match */ /* * We compare all the limit registers, the config register and the * interrupt mask registers */ for (i = 0x2b; i <= 0x3d; i++) { if (w83781d_read_value(isa, i) != i2c_smbus_read_byte_data(client, i)) return 0; } if (w83781d_read_value(isa, W83781D_REG_CONFIG) != i2c_smbus_read_byte_data(client, W83781D_REG_CONFIG)) return 0; for (i = 0x43; i <= 0x46; i++) { if (w83781d_read_value(isa, i) != i2c_smbus_read_byte_data(client, i)) return 0; } return 1; } static int w83781d_read_value_isa(struct w83781d_data *data, u16 reg) { int word_sized, res; word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) && (((reg & 0x00ff) == 0x50) || ((reg & 0x00ff) == 0x53) || ((reg & 0x00ff) == 0x55)); if (reg & 0xff00) { outb_p(W83781D_REG_BANK, data->isa_addr + W83781D_ADDR_REG_OFFSET); outb_p(reg >> 8, data->isa_addr + W83781D_DATA_REG_OFFSET); } outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET); res = inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET); if (word_sized) { outb_p((reg & 0xff) + 1, data->isa_addr + W83781D_ADDR_REG_OFFSET); res = (res << 8) + inb_p(data->isa_addr + W83781D_DATA_REG_OFFSET); } if (reg & 0xff00) { outb_p(W83781D_REG_BANK, data->isa_addr + W83781D_ADDR_REG_OFFSET); outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET); } return res; } static void w83781d_write_value_isa(struct w83781d_data *data, u16 reg, u16 value) { int word_sized; word_sized = (((reg & 0xff00) == 0x100) || ((reg & 0xff00) == 0x200)) && (((reg & 0x00ff) == 0x53) || ((reg & 0x00ff) == 0x55)); if (reg & 0xff00) { outb_p(W83781D_REG_BANK, data->isa_addr + W83781D_ADDR_REG_OFFSET); outb_p(reg >> 8, data->isa_addr + W83781D_DATA_REG_OFFSET); } outb_p(reg & 0xff, data->isa_addr + W83781D_ADDR_REG_OFFSET); if (word_sized) { outb_p(value >> 8, data->isa_addr + W83781D_DATA_REG_OFFSET); outb_p((reg & 0xff) + 1, data->isa_addr + W83781D_ADDR_REG_OFFSET); } outb_p(value & 0xff, data->isa_addr + W83781D_DATA_REG_OFFSET); if (reg & 0xff00) { outb_p(W83781D_REG_BANK, data->isa_addr + W83781D_ADDR_REG_OFFSET); outb_p(0, data->isa_addr + W83781D_DATA_REG_OFFSET); } } /* * The SMBus locks itself, usually, but nothing may access the Winbond between * bank switches. ISA access must always be locked explicitly! * We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks, * would slow down the W83781D access and should not be necessary. * There are some ugly typecasts here, but the good news is - they should * nowhere else be necessary! */ static int w83781d_read_value(struct w83781d_data *data, u16 reg) { struct i2c_client *client = data->client; int res; mutex_lock(&data->lock); if (client) res = w83781d_read_value_i2c(data, reg); else res = w83781d_read_value_isa(data, reg); mutex_unlock(&data->lock); return res; } static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value) { struct i2c_client *client = data->client; mutex_lock(&data->lock); if (client) w83781d_write_value_i2c(data, reg, value); else w83781d_write_value_isa(data, reg, value); mutex_unlock(&data->lock); return 0; } static int w83781d_isa_probe(struct platform_device *pdev) { int err, reg; struct w83781d_data *data; struct resource *res; /* Reserve the ISA region */ res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (!devm_request_region(&pdev->dev, res->start + W83781D_ADDR_REG_OFFSET, 2, "w83781d")) return -EBUSY; data = devm_kzalloc(&pdev->dev, sizeof(struct w83781d_data), GFP_KERNEL); if (!data) return -ENOMEM; mutex_init(&data->lock); data->isa_addr = res->start; platform_set_drvdata(pdev, data); reg = w83781d_read_value(data, W83781D_REG_WCHIPID); switch (reg) { case 0x30: data->type = w83782d; data->name = "w83782d"; break; default: data->type = w83781d; data->name = "w83781d"; } /* Initialize the W83781D chip */ w83781d_init_device(&pdev->dev); /* Register sysfs hooks */ err = w83781d_create_files(&pdev->dev, data->type, 1); if (err) goto exit_remove_files; err = device_create_file(&pdev->dev, &dev_attr_name); if (err) goto exit_remove_files; data->hwmon_dev = hwmon_device_register(&pdev->dev); if (IS_ERR(data->hwmon_dev)) { err = PTR_ERR(data->hwmon_dev); goto exit_remove_files; } return 0; exit_remove_files: w83781d_remove_files(&pdev->dev); device_remove_file(&pdev->dev, &dev_attr_name); return err; } static void w83781d_isa_remove(struct platform_device *pdev) { struct w83781d_data *data = platform_get_drvdata(pdev); hwmon_device_unregister(data->hwmon_dev); w83781d_remove_files(&pdev->dev); device_remove_file(&pdev->dev, &dev_attr_name); } static struct platform_driver w83781d_isa_driver = { .driver = { .name = "w83781d", }, .probe = w83781d_isa_probe, .remove_new = w83781d_isa_remove, }; /* return 1 if a supported chip is found, 0 otherwise */ static int __init w83781d_isa_found(unsigned short address) { int val, save, found = 0; int port; /* * Some boards declare base+0 to base+7 as a PNP device, some base+4 * to base+7 and some base+5 to base+6. So we better request each port * individually for the probing phase. */ for (port = address; port < address + W83781D_EXTENT; port++) { if (!request_region(port, 1, "w83781d")) { pr_debug("Failed to request port 0x%x\n", port); goto release; } } #define REALLY_SLOW_IO /* * We need the timeouts for at least some W83781D-like * chips. But only if we read 'undefined' registers. */ val = inb_p(address + 1); if (inb_p(address + 2) != val || inb_p(address + 3) != val || inb_p(address + 7) != val) { pr_debug("Detection failed at step %d\n", 1); goto release; } #undef REALLY_SLOW_IO /* * We should be able to change the 7 LSB of the address port. The * MSB (busy flag) should be clear initially, set after the write. */ save = inb_p(address + W83781D_ADDR_REG_OFFSET); if (save & 0x80) { pr_debug("Detection failed at step %d\n", 2); goto release; } val = ~save & 0x7f; outb_p(val, address + W83781D_ADDR_REG_OFFSET); if (inb_p(address + W83781D_ADDR_REG_OFFSET) != (val | 0x80)) { outb_p(save, address + W83781D_ADDR_REG_OFFSET); pr_debug("Detection failed at step %d\n", 3); goto release; } /* We found a device, now see if it could be a W83781D */ outb_p(W83781D_REG_CONFIG, address + W83781D_ADDR_REG_OFFSET); val = inb_p(address + W83781D_DATA_REG_OFFSET); if (val & 0x80) { pr_debug("Detection failed at step %d\n", 4); goto release; } outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET); save = inb_p(address + W83781D_DATA_REG_OFFSET); outb_p(W83781D_REG_CHIPMAN, address + W83781D_ADDR_REG_OFFSET); val = inb_p(address + W83781D_DATA_REG_OFFSET); if ((!(save & 0x80) && (val != 0xa3)) || ((save & 0x80) && (val != 0x5c))) { pr_debug("Detection failed at step %d\n", 5); goto release; } outb_p(W83781D_REG_I2C_ADDR, address + W83781D_ADDR_REG_OFFSET); val = inb_p(address + W83781D_DATA_REG_OFFSET); if (val < 0x03 || val > 0x77) { /* Not a valid I2C address */ pr_debug("Detection failed at step %d\n", 6); goto release; } /* The busy flag should be clear again */ if (inb_p(address + W83781D_ADDR_REG_OFFSET) & 0x80) { pr_debug("Detection failed at step %d\n", 7); goto release; } /* Determine the chip type */ outb_p(W83781D_REG_BANK, address + W83781D_ADDR_REG_OFFSET); save = inb_p(address + W83781D_DATA_REG_OFFSET); outb_p(save & 0xf8, address + W83781D_DATA_REG_OFFSET); outb_p(W83781D_REG_WCHIPID, address + W83781D_ADDR_REG_OFFSET); val = inb_p(address + W83781D_DATA_REG_OFFSET); if ((val & 0xfe) == 0x10 /* W83781D */ || val == 0x30) /* W83782D */ found = 1; if (found) pr_info("Found a %s chip at %#x\n", val == 0x30 ? "W83782D" : "W83781D", (int)address); release: for (port--; port >= address; port--) release_region(port, 1); return found; } static int __init w83781d_isa_device_add(unsigned short address) { struct resource res = { .start = address, .end = address + W83781D_EXTENT - 1, .name = "w83781d", .flags = IORESOURCE_IO, }; int err; pdev = platform_device_alloc("w83781d", address); if (!pdev) { err = -ENOMEM; pr_err("Device allocation failed\n"); goto exit; } err = platform_device_add_resources(pdev, &res, 1); if (err) { pr_err("Device resource addition failed (%d)\n", err); goto exit_device_put; } err = platform_device_add(pdev); if (err) { pr_err("Device addition failed (%d)\n", err); goto exit_device_put; } return 0; exit_device_put: platform_device_put(pdev); exit: pdev = NULL; return err; } static int __init w83781d_isa_register(void) { int res; if (w83781d_isa_found(isa_address)) { res = platform_driver_register(&w83781d_isa_driver); if (res) goto exit; /* Sets global pdev as a side effect */ res = w83781d_isa_device_add(isa_address); if (res) goto exit_unreg_isa_driver; } return 0; exit_unreg_isa_driver: platform_driver_unregister(&w83781d_isa_driver); exit: return res; } static void w83781d_isa_unregister(void) { if (pdev) { platform_device_unregister(pdev); platform_driver_unregister(&w83781d_isa_driver); } } #else /* !CONFIG_ISA */ static struct w83781d_data *w83781d_data_if_isa(void) { return NULL; } static int w83781d_alias_detect(struct i2c_client *client, u8 chipid) { return 0; } static int w83781d_read_value(struct w83781d_data *data, u16 reg) { int res; mutex_lock(&data->lock); res = w83781d_read_value_i2c(data, reg); mutex_unlock(&data->lock); return res; } static int w83781d_write_value(struct w83781d_data *data, u16 reg, u16 value) { mutex_lock(&data->lock); w83781d_write_value_i2c(data, reg, value); mutex_unlock(&data->lock); return 0; } static int __init w83781d_isa_register(void) { return 0; } static void w83781d_isa_unregister(void) { } #endif /* CONFIG_ISA */ static int __init sensors_w83781d_init(void) { int res; /* * We register the ISA device first, so that we can skip the * registration of an I2C interface to the same device. */ res = w83781d_isa_register(); if (res) goto exit; res = i2c_add_driver(&w83781d_driver); if (res) goto exit_unreg_isa; return 0; exit_unreg_isa: w83781d_isa_unregister(); exit: return res; } static void __exit sensors_w83781d_exit(void) { w83781d_isa_unregister(); i2c_del_driver(&w83781d_driver); } MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " "Philip Edelbrock <phil@netroedge.com>, " "and Mark Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("W83781D driver"); MODULE_LICENSE("GPL"); module_init(sensors_w83781d_init); module_exit(sensors_w83781d_exit);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1