Contributors: 11
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Martin Samuelsson |
565 |
59.66% |
1 |
4.17% |
| Hans Verkuil |
334 |
35.27% |
6 |
25.00% |
| Linus Torvalds (pre-git) |
15 |
1.58% |
5 |
20.83% |
| Linus Torvalds |
7 |
0.74% |
3 |
12.50% |
| Mauro Carvalho Chehab |
7 |
0.74% |
2 |
8.33% |
| Alan Cox |
6 |
0.63% |
1 |
4.17% |
| Laurent Pinchart |
6 |
0.63% |
1 |
4.17% |
| Thomas Gleixner |
2 |
0.21% |
1 |
4.17% |
| Uwe Kleine-König |
2 |
0.21% |
2 |
8.33% |
| Axel Lin |
2 |
0.21% |
1 |
4.17% |
| Andrew Morton |
1 |
0.11% |
1 |
4.17% |
| Total |
947 |
|
24 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
bt866 - BT866 Digital Video Encoder (Rockwell Part)
Copyright (C) 1999 Mike Bernson <mike@mlb.org>
Copyright (C) 1998 Dave Perks <dperks@ibm.net>
Modifications for LML33/DC10plus unified driver
Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
This code was modify/ported from the saa7111 driver written
by Dave Perks.
This code was adapted for the bt866 by Christer Weinigel and ported
to 2.6 by Martin Samuelsson.
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/ioctl.h>
#include <linux/uaccess.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
MODULE_DESCRIPTION("Brooktree-866 video encoder driver");
MODULE_AUTHOR("Mike Bernson & Dave Perks");
MODULE_LICENSE("GPL");
static int debug;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
/* ----------------------------------------------------------------------- */
struct bt866 {
struct v4l2_subdev sd;
u8 reg[256];
};
static inline struct bt866 *to_bt866(struct v4l2_subdev *sd)
{
return container_of(sd, struct bt866, sd);
}
static int bt866_write(struct bt866 *encoder, u8 subaddr, u8 data)
{
struct i2c_client *client = v4l2_get_subdevdata(&encoder->sd);
u8 buffer[2];
int err;
buffer[0] = subaddr;
buffer[1] = data;
encoder->reg[subaddr] = data;
v4l_dbg(1, debug, client, "write 0x%02x = 0x%02x\n", subaddr, data);
for (err = 0; err < 3;) {
if (i2c_master_send(client, buffer, 2) == 2)
break;
err++;
v4l_warn(client, "error #%d writing to 0x%02x\n",
err, subaddr);
schedule_timeout_interruptible(msecs_to_jiffies(100));
}
if (err == 3) {
v4l_warn(client, "giving up\n");
return -1;
}
return 0;
}
static int bt866_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
{
v4l2_dbg(1, debug, sd, "set norm %llx\n", (unsigned long long)std);
/* Only PAL supported by this driver at the moment! */
if (!(std & V4L2_STD_NTSC))
return -EINVAL;
return 0;
}
static int bt866_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
static const __u8 init[] = {
0xc8, 0xcc, /* CRSCALE */
0xca, 0x91, /* CBSCALE */
0xcc, 0x24, /* YC16 | OSDNUM */
0xda, 0x00, /* */
0xdc, 0x24, /* SETMODE | PAL */
0xde, 0x02, /* EACTIVE */
/* overlay colors */
0x70, 0xEB, 0x90, 0x80, 0xB0, 0x80, /* white */
0x72, 0xA2, 0x92, 0x8E, 0xB2, 0x2C, /* yellow */
0x74, 0x83, 0x94, 0x2C, 0xB4, 0x9C, /* cyan */
0x76, 0x70, 0x96, 0x3A, 0xB6, 0x48, /* green */
0x78, 0x54, 0x98, 0xC6, 0xB8, 0xB8, /* magenta */
0x7A, 0x41, 0x9A, 0xD4, 0xBA, 0x64, /* red */
0x7C, 0x23, 0x9C, 0x72, 0xBC, 0xD4, /* blue */
0x7E, 0x10, 0x9E, 0x80, 0xBE, 0x80, /* black */
0x60, 0xEB, 0x80, 0x80, 0xc0, 0x80, /* white */
0x62, 0xA2, 0x82, 0x8E, 0xc2, 0x2C, /* yellow */
0x64, 0x83, 0x84, 0x2C, 0xc4, 0x9C, /* cyan */
0x66, 0x70, 0x86, 0x3A, 0xc6, 0x48, /* green */
0x68, 0x54, 0x88, 0xC6, 0xc8, 0xB8, /* magenta */
0x6A, 0x41, 0x8A, 0xD4, 0xcA, 0x64, /* red */
0x6C, 0x23, 0x8C, 0x72, 0xcC, 0xD4, /* blue */
0x6E, 0x10, 0x8E, 0x80, 0xcE, 0x80, /* black */
};
struct bt866 *encoder = to_bt866(sd);
u8 val;
int i;
for (i = 0; i < ARRAY_SIZE(init) / 2; i += 2)
bt866_write(encoder, init[i], init[i+1]);
val = encoder->reg[0xdc];
if (input == 0)
val |= 0x40; /* CBSWAP */
else
val &= ~0x40; /* !CBSWAP */
bt866_write(encoder, 0xdc, val);
val = encoder->reg[0xcc];
if (input == 2)
val |= 0x01; /* OSDBAR */
else
val &= ~0x01; /* !OSDBAR */
bt866_write(encoder, 0xcc, val);
v4l2_dbg(1, debug, sd, "set input %d\n", input);
switch (input) {
case 0:
case 1:
case 2:
break;
default:
return -EINVAL;
}
return 0;
}
#if 0
/* Code to setup square pixels, might be of some use in the future,
but is currently unused. */
val = encoder->reg[0xdc];
if (*iarg)
val |= 1; /* SQUARE */
else
val &= ~1; /* !SQUARE */
bt866_write(client, 0xdc, val);
#endif
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_video_ops bt866_video_ops = {
.s_std_output = bt866_s_std_output,
.s_routing = bt866_s_routing,
};
static const struct v4l2_subdev_ops bt866_ops = {
.video = &bt866_video_ops,
};
static int bt866_probe(struct i2c_client *client)
{
struct bt866 *encoder;
struct v4l2_subdev *sd;
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
encoder = devm_kzalloc(&client->dev, sizeof(*encoder), GFP_KERNEL);
if (encoder == NULL)
return -ENOMEM;
sd = &encoder->sd;
v4l2_i2c_subdev_init(sd, client, &bt866_ops);
return 0;
}
static void bt866_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
}
static const struct i2c_device_id bt866_id[] = {
{ "bt866", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, bt866_id);
static struct i2c_driver bt866_driver = {
.driver = {
.name = "bt866",
},
.probe = bt866_probe,
.remove = bt866_remove,
.id_table = bt866_id,
};
module_i2c_driver(bt866_driver);