Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Devarsh Thakkar | 957 | 100.00% | 1 | 100.00% |
Total | 957 | 1 |
// SPDX-License-Identifier: GPL-2.0 /* * Imagination E5010 JPEG Encoder driver. * * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/ * * Author: David Huang <d-huang@ti.com> * Author: Devarsh Thakkar <devarsht@ti.com> */ #include <linux/io.h> #include <linux/iopoll.h> #include <linux/dev_printk.h> #include "e5010-jpeg-enc-hw.h" static void write_reg_field(void __iomem *base, unsigned int offset, u32 mask, unsigned int shift, u32 value) { u32 reg; value <<= shift; if (mask != 0xffffffff) { reg = readl(base + offset); value = (value & mask) | (reg & ~mask); } writel(value, (base + offset)); } static int write_reg_field_not_busy(void __iomem *jasper_base, void __iomem *wr_base, unsigned int offset, u32 mask, unsigned int shift, u32 value) { int ret; u32 val; ret = readl_poll_timeout_atomic(jasper_base + JASPER_STATUS_OFFSET, val, (val & JASPER_STATUS_CR_JASPER_BUSY_MASK) == 0, 2000, 50000); if (ret) return ret; write_reg_field(wr_base, offset, mask, shift, value); return 0; } void e5010_reset(struct device *dev, void __iomem *core_base, void __iomem *mmu_base) { int ret = 0; u32 val; write_reg_field(core_base, JASPER_RESET_OFFSET, JASPER_RESET_CR_CORE_RESET_MASK, JASPER_RESET_CR_CORE_RESET_SHIFT, 1); write_reg_field(mmu_base, MMU_MMU_CONTROL1_OFFSET, MMU_MMU_CONTROL1_MMU_SOFT_RESET_MASK, MMU_MMU_CONTROL1_MMU_SOFT_RESET_SHIFT, 1); ret = readl_poll_timeout_atomic(mmu_base + MMU_MMU_CONTROL1_OFFSET, val, (val & MMU_MMU_CONTROL1_MMU_SOFT_RESET_MASK) == 0, 2000, 50000); if (ret) dev_warn(dev, "MMU soft reset timed out, forcing system soft reset\n"); write_reg_field(core_base, JASPER_RESET_OFFSET, JASPER_RESET_CR_SYS_RESET_MASK, JASPER_RESET_CR_SYS_RESET_SHIFT, 1); } void e5010_hw_bypass_mmu(void __iomem *mmu_base, u32 enable) { /* Bypass MMU */ write_reg_field(mmu_base, MMU_MMU_ADDRESS_CONTROL_OFFSET, MMU_MMU_ADDRESS_CONTROL_MMU_BYPASS_MASK, MMU_MMU_ADDRESS_CONTROL_MMU_BYPASS_SHIFT, enable); } int e5010_hw_enable_output_address_error_irq(void __iomem *core_base, u32 enable) { return write_reg_field_not_busy(core_base, core_base, JASPER_INTERRUPT_MASK_OFFSET, JASPER_INTERRUPT_MASK_CR_OUTPUT_ADDRESS_ERROR_ENABLE_MASK, JASPER_INTERRUPT_MASK_CR_OUTPUT_ADDRESS_ERROR_ENABLE_SHIFT, enable); } bool e5010_hw_pic_done_irq(void __iomem *core_base) { u32 reg; reg = readl(core_base + JASPER_INTERRUPT_STATUS_OFFSET); return reg & JASPER_INTERRUPT_STATUS_CR_PICTURE_DONE_IRQ_MASK; } bool e5010_hw_output_address_irq(void __iomem *core_base) { u32 reg; reg = readl(core_base + JASPER_INTERRUPT_STATUS_OFFSET); return reg & JASPER_INTERRUPT_STATUS_CR_OUTPUT_ADDRESS_ERROR_IRQ_MASK; } int e5010_hw_enable_picture_done_irq(void __iomem *core_base, u32 enable) { return write_reg_field_not_busy(core_base, core_base, JASPER_INTERRUPT_MASK_OFFSET, JASPER_INTERRUPT_MASK_CR_PICTURE_DONE_ENABLE_MASK, JASPER_INTERRUPT_MASK_CR_PICTURE_DONE_ENABLE_SHIFT, enable); } int e5010_hw_enable_auto_clock_gating(void __iomem *core_base, u32 enable) { return write_reg_field_not_busy(core_base, core_base, JASPER_CLK_CONTROL_OFFSET, JASPER_CLK_CONTROL_CR_JASPER_AUTO_CLKG_ENABLE_MASK, JASPER_CLK_CONTROL_CR_JASPER_AUTO_CLKG_ENABLE_SHIFT, enable); } int e5010_hw_enable_manual_clock_gating(void __iomem *core_base, u32 enable) { return write_reg_field_not_busy(core_base, core_base, JASPER_CLK_CONTROL_OFFSET, JASPER_CLK_CONTROL_CR_JASPER_MAN_CLKG_ENABLE_MASK, JASPER_CLK_CONTROL_CR_JASPER_MAN_CLKG_ENABLE_SHIFT, 0); } int e5010_hw_enable_crc_check(void __iomem *core_base, u32 enable) { return write_reg_field_not_busy(core_base, core_base, JASPER_CRC_CTRL_OFFSET, JASPER_CRC_CTRL_JASPER_CRC_ENABLE_MASK, JASPER_CRC_CTRL_JASPER_CRC_ENABLE_SHIFT, enable); } int e5010_hw_set_input_source_to_memory(void __iomem *core_base, u32 set) { return write_reg_field_not_busy(core_base, core_base, JASPER_INPUT_CTRL0_OFFSET, JASPER_INPUT_CTRL0_CR_INPUT_SOURCE_MASK, JASPER_INPUT_CTRL0_CR_INPUT_SOURCE_SHIFT, set); } int e5010_hw_set_input_luma_addr(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, INPUT_LUMA_BASE_OFFSET, INPUT_LUMA_BASE_CR_INPUT_LUMA_BASE_MASK, 0, val); } int e5010_hw_set_input_chroma_addr(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, INPUT_CHROMA_BASE_OFFSET, INPUT_CHROMA_BASE_CR_INPUT_CHROMA_BASE_MASK, 0, val); } int e5010_hw_set_output_base_addr(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, JASPER_OUTPUT_BASE_OFFSET, JASPER_OUTPUT_BASE_CR_OUTPUT_BASE_MASK, JASPER_OUTPUT_BASE_CR_OUTPUT_BASE_SHIFT, val); } int e5010_hw_set_horizontal_size(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, JASPER_IMAGE_SIZE_OFFSET, JASPER_IMAGE_SIZE_CR_IMAGE_HORIZONTAL_SIZE_MASK, JASPER_IMAGE_SIZE_CR_IMAGE_HORIZONTAL_SIZE_SHIFT, val); } int e5010_hw_set_vertical_size(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, JASPER_IMAGE_SIZE_OFFSET, JASPER_IMAGE_SIZE_CR_IMAGE_VERTICAL_SIZE_MASK, JASPER_IMAGE_SIZE_CR_IMAGE_VERTICAL_SIZE_SHIFT, val); } int e5010_hw_set_luma_stride(void __iomem *core_base, u32 bytesperline) { u32 val = bytesperline / 64; return write_reg_field_not_busy(core_base, core_base, JASPER_INPUT_CTRL1_OFFSET, JASPER_INPUT_CTRL1_CR_INPUT_LUMA_STRIDE_MASK, JASPER_INPUT_CTRL1_CR_INPUT_LUMA_STRIDE_SHIFT, val); } int e5010_hw_set_chroma_stride(void __iomem *core_base, u32 bytesperline) { u32 val = bytesperline / 64; return write_reg_field_not_busy(core_base, core_base, JASPER_INPUT_CTRL1_OFFSET, JASPER_INPUT_CTRL1_CR_INPUT_CHROMA_STRIDE_MASK, JASPER_INPUT_CTRL1_CR_INPUT_CHROMA_STRIDE_SHIFT, val); } int e5010_hw_set_input_subsampling(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, JASPER_INPUT_CTRL0_OFFSET, JASPER_INPUT_CTRL0_CR_INPUT_SUBSAMPLING_MASK, JASPER_INPUT_CTRL0_CR_INPUT_SUBSAMPLING_SHIFT, val); } int e5010_hw_set_chroma_order(void __iomem *core_base, u32 val) { return write_reg_field_not_busy(core_base, core_base, JASPER_INPUT_CTRL0_OFFSET, JASPER_INPUT_CTRL0_CR_INPUT_CHROMA_ORDER_MASK, JASPER_INPUT_CTRL0_CR_INPUT_CHROMA_ORDER_SHIFT, val); } void e5010_hw_set_output_max_size(void __iomem *core_base, u32 val) { write_reg_field(core_base, JASPER_OUTPUT_MAX_SIZE_OFFSET, JASPER_OUTPUT_MAX_SIZE_CR_OUTPUT_MAX_SIZE_MASK, JASPER_OUTPUT_MAX_SIZE_CR_OUTPUT_MAX_SIZE_SHIFT, val); } int e5010_hw_set_qpvalue(void __iomem *core_base, u32 offset, u32 val) { return write_reg_field_not_busy(core_base, core_base, offset, 0xffffffff, 0, val); } void e5010_hw_clear_output_error(void __iomem *core_base, u32 clear) { /* Make sure interrupts are clear */ write_reg_field(core_base, JASPER_INTERRUPT_CLEAR_OFFSET, JASPER_INTERRUPT_CLEAR_CR_OUTPUT_ERROR_CLEAR_MASK, JASPER_INTERRUPT_CLEAR_CR_OUTPUT_ERROR_CLEAR_SHIFT, clear); } void e5010_hw_clear_picture_done(void __iomem *core_base, u32 clear) { write_reg_field(core_base, JASPER_INTERRUPT_CLEAR_OFFSET, JASPER_INTERRUPT_CLEAR_CR_PICTURE_DONE_CLEAR_MASK, JASPER_INTERRUPT_CLEAR_CR_PICTURE_DONE_CLEAR_SHIFT, clear); } int e5010_hw_get_output_size(void __iomem *core_base) { return readl(core_base + JASPER_OUTPUT_SIZE_OFFSET); } void e5010_hw_encode_start(void __iomem *core_base, u32 start) { write_reg_field(core_base, JASPER_CORE_CTRL_OFFSET, JASPER_CORE_CTRL_CR_JASPER_ENCODE_START_MASK, JASPER_CORE_CTRL_CR_JASPER_ENCODE_START_SHIFT, start); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1