Contributors: 6
Author Tokens Token Proportion Commits Commit Proportion
Matt Ranostay 475 83.63% 1 14.29%
Claudiu Beznea 46 8.10% 2 28.57%
Marek Vašut 38 6.69% 1 14.29%
Jeff Johnson 5 0.88% 1 14.29%
Thomas Gleixner 2 0.35% 1 14.29%
Yangtao Li 2 0.35% 1 14.29%
Total 568 7 


// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * pwrseq_sd8787.c - power sequence support for Marvell SD8787 BT + Wifi chip
 *
 * Copyright (C) 2016 Matt Ranostay <matt@ranostay.consulting>
 *
 * Based on the original work pwrseq_simple.c
 *  Copyright (C) 2014 Linaro Ltd
 *  Author: Ulf Hansson <ulf.hansson@linaro.org>
 */

#include <linux/delay.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>

#include <linux/mmc/host.h>

#include "pwrseq.h"

struct mmc_pwrseq_sd8787 {
	struct mmc_pwrseq pwrseq;
	struct gpio_desc *reset_gpio;
	struct gpio_desc *pwrdn_gpio;
};

#define to_pwrseq_sd8787(p) container_of(p, struct mmc_pwrseq_sd8787, pwrseq)

static void mmc_pwrseq_sd8787_pre_power_on(struct mmc_host *host)
{
	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);

	gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);

	msleep(300);
	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1);
}

static void mmc_pwrseq_sd8787_power_off(struct mmc_host *host)
{
	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);

	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0);
	gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
}

static void mmc_pwrseq_wilc1000_pre_power_on(struct mmc_host *host)
{
	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);

	/* The pwrdn_gpio is really CHIP_EN, reset_gpio is RESETN */
	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 1);
	msleep(5);
	gpiod_set_value_cansleep(pwrseq->reset_gpio, 1);
}

static void mmc_pwrseq_wilc1000_power_off(struct mmc_host *host)
{
	struct mmc_pwrseq_sd8787 *pwrseq = to_pwrseq_sd8787(host->pwrseq);

	gpiod_set_value_cansleep(pwrseq->reset_gpio, 0);
	gpiod_set_value_cansleep(pwrseq->pwrdn_gpio, 0);
}

static const struct mmc_pwrseq_ops mmc_pwrseq_sd8787_ops = {
	.pre_power_on = mmc_pwrseq_sd8787_pre_power_on,
	.power_off = mmc_pwrseq_sd8787_power_off,
};

static const struct mmc_pwrseq_ops mmc_pwrseq_wilc1000_ops = {
	.pre_power_on = mmc_pwrseq_wilc1000_pre_power_on,
	.power_off = mmc_pwrseq_wilc1000_power_off,
};

static const struct of_device_id mmc_pwrseq_sd8787_of_match[] = {
	{ .compatible = "mmc-pwrseq-sd8787", .data = &mmc_pwrseq_sd8787_ops },
	{ .compatible = "mmc-pwrseq-wilc1000", .data = &mmc_pwrseq_wilc1000_ops },
	{/* sentinel */},
};
MODULE_DEVICE_TABLE(of, mmc_pwrseq_sd8787_of_match);

static int mmc_pwrseq_sd8787_probe(struct platform_device *pdev)
{
	struct mmc_pwrseq_sd8787 *pwrseq;
	struct device *dev = &pdev->dev;
	const struct of_device_id *match;

	pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
	if (!pwrseq)
		return -ENOMEM;

	match = of_match_node(mmc_pwrseq_sd8787_of_match, pdev->dev.of_node);

	pwrseq->pwrdn_gpio = devm_gpiod_get(dev, "powerdown", GPIOD_OUT_LOW);
	if (IS_ERR(pwrseq->pwrdn_gpio))
		return PTR_ERR(pwrseq->pwrdn_gpio);

	pwrseq->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
	if (IS_ERR(pwrseq->reset_gpio))
		return PTR_ERR(pwrseq->reset_gpio);

	pwrseq->pwrseq.dev = dev;
	pwrseq->pwrseq.ops = match->data;
	pwrseq->pwrseq.owner = THIS_MODULE;
	platform_set_drvdata(pdev, pwrseq);

	return mmc_pwrseq_register(&pwrseq->pwrseq);
}

static void mmc_pwrseq_sd8787_remove(struct platform_device *pdev)
{
	struct mmc_pwrseq_sd8787 *pwrseq = platform_get_drvdata(pdev);

	mmc_pwrseq_unregister(&pwrseq->pwrseq);
}

static struct platform_driver mmc_pwrseq_sd8787_driver = {
	.probe = mmc_pwrseq_sd8787_probe,
	.remove_new = mmc_pwrseq_sd8787_remove,
	.driver = {
		.name = "pwrseq_sd8787",
		.of_match_table = mmc_pwrseq_sd8787_of_match,
	},
};

module_platform_driver(mmc_pwrseq_sd8787_driver);
MODULE_DESCRIPTION("Power sequence support for Marvell SD8787 BT + Wifi chip");
MODULE_LICENSE("GPL v2");