| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Peter Griffin | 1746 | 89.54% | 7 | 33.33% |
| Lee Jones | 55 | 2.82% | 1 | 4.76% |
| JiSheng Zhang | 47 | 2.41% | 1 | 4.76% |
| Arvind Yadav | 41 | 2.10% | 1 | 4.76% |
| Adrian Hunter | 28 | 1.44% | 2 | 9.52% |
| Oded Gabbay | 6 | 0.31% | 1 | 4.76% |
| Philipp Zabel | 6 | 0.31% | 1 | 4.76% |
| Doug Anderson | 5 | 0.26% | 1 | 4.76% |
| Ulf Hansson | 5 | 0.26% | 1 | 4.76% |
| Jaehoon Chung | 4 | 0.21% | 1 | 4.76% |
| Thomas Gleixner | 2 | 0.10% | 1 | 4.76% |
| Yangtao Li | 2 | 0.10% | 1 | 4.76% |
| Li Zetao | 2 | 0.10% | 1 | 4.76% |
| Zhangfei Gao | 1 | 0.05% | 1 | 4.76% |
| Total | 1950 | 21 |
// SPDX-License-Identifier: GPL-2.0-only /* * Support for SDHCI on STMicroelectronics SoCs * * Copyright (C) 2014 STMicroelectronics Ltd * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> * Contributors: Peter Griffin <peter.griffin@linaro.org> * * Based on sdhci-cns3xxx.c */ #include <linux/io.h> #include <linux/of.h> #include <linux/module.h> #include <linux/err.h> #include <linux/mmc/host.h> #include <linux/reset.h> #include "sdhci-pltfm.h" struct st_mmc_platform_data { struct reset_control *rstc; struct clk *icnclk; void __iomem *top_ioaddr; }; /* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ #define ST_MMC_CCONFIG_REG_1 0x400 #define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) #define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) #define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) #define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) #define ST_MMC_CCONFIG_1_DEFAULT \ ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) #define ST_MMC_CCONFIG_REG_2 0x404 #define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) #define ST_MMC_CCONFIG_ADMA2 BIT(24) #define ST_MMC_CCONFIG_8BIT BIT(20) #define ST_MMC_CCONFIG_MAX_BLK_LEN 16 #define MAX_BLK_LEN_1024 1 #define MAX_BLK_LEN_2048 2 #define BASE_CLK_FREQ_200 0xc8 #define BASE_CLK_FREQ_100 0x64 #define BASE_CLK_FREQ_50 0x32 #define ST_MMC_CCONFIG_2_DEFAULT \ (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ ST_MMC_CCONFIG_8BIT | \ (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) #define ST_MMC_CCONFIG_REG_3 0x408 #define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) #define ST_MMC_CCONFIG_64BIT BIT(24) #define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) #define ST_MMC_CCONFIG_1P8_VOLT BIT(16) #define ST_MMC_CCONFIG_3P0_VOLT BIT(12) #define ST_MMC_CCONFIG_3P3_VOLT BIT(8) #define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) #define ST_MMC_CCONFIG_SDMA BIT(0) #define ST_MMC_CCONFIG_3_DEFAULT \ (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ ST_MMC_CCONFIG_3P3_VOLT | \ ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ ST_MMC_CCONFIG_SDMA) #define ST_MMC_CCONFIG_REG_4 0x40c #define ST_MMC_CCONFIG_D_DRIVER BIT(20) #define ST_MMC_CCONFIG_C_DRIVER BIT(16) #define ST_MMC_CCONFIG_A_DRIVER BIT(12) #define ST_MMC_CCONFIG_DDR50 BIT(8) #define ST_MMC_CCONFIG_SDR104 BIT(4) #define ST_MMC_CCONFIG_SDR50 BIT(0) #define ST_MMC_CCONFIG_4_DEFAULT 0 #define ST_MMC_CCONFIG_REG_5 0x410 #define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) #define RETUNING_TIMER_CNT_MAX 0xf #define ST_MMC_CCONFIG_5_DEFAULT 0 /* I/O configuration for Arasan IP */ #define ST_MMC_GP_OUTPUT 0x450 #define ST_MMC_GP_OUTPUT_CD BIT(12) #define ST_MMC_STATUS_R 0x460 #define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) /* TOP config registers to manage static and dynamic delay */ #define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) #define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) /* MMC delay control register */ #define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) #define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) #define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) #define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) #define ST_TOP_MMC_START_DLL_LOCK BIT(11) /* register to provide the phase-shift value for DLL */ #define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) #define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) #define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) /* phase shift delay on the tx clk 2.188ns */ #define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 #define ST_TOP_MMC_DLY_MAX 0xf #define ST_TOP_MMC_DYN_DLY_CONF \ (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ ST_TOP_MMC_START_DLL_LOCK) /* * For clock speeds greater than 90MHz, we need to check that the * DLL procedure has finished before switching to ultra-speed modes. */ #define CLK_TO_CHECK_DLL_LOCK 90000000 static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) { if (!ioaddr) return; writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); writel_relaxed(ST_TOP_MMC_DLY_MAX, ioaddr + ST_TOP_MMC_TX_CLK_DLY); } /** * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. * @np: dt device node. * @host: sdhci host * Description: this function is to configure the Arasan host controller. * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 * or eMMC4.3. This has to be done before registering the sdhci host. */ static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct mmc_host *mhost = host->mmc; u32 cconf2, cconf3, cconf4, cconf5; if (!of_device_is_compatible(np, "st,sdhci-stih407")) return; cconf2 = ST_MMC_CCONFIG_2_DEFAULT; cconf3 = ST_MMC_CCONFIG_3_DEFAULT; cconf4 = ST_MMC_CCONFIG_4_DEFAULT; cconf5 = ST_MMC_CCONFIG_5_DEFAULT; writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, host->ioaddr + ST_MMC_CCONFIG_REG_1); /* Set clock frequency, default to 50MHz if max-frequency is not * provided */ switch (mhost->f_max) { case 200000000: clk_set_rate(pltfm_host->clk, mhost->f_max); cconf2 |= BASE_CLK_FREQ_200; break; case 100000000: clk_set_rate(pltfm_host->clk, mhost->f_max); cconf2 |= BASE_CLK_FREQ_100; break; default: clk_set_rate(pltfm_host->clk, 50000000); cconf2 |= BASE_CLK_FREQ_50; } writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); if (!mmc_card_is_removable(mhost)) cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; else /* CARD _D ET_CTRL */ writel_relaxed(ST_MMC_GP_OUTPUT_CD, host->ioaddr + ST_MMC_GP_OUTPUT); if (mhost->caps & MMC_CAP_UHS_SDR50) { /* use 1.8V */ cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; cconf4 |= ST_MMC_CCONFIG_SDR50; /* Use tuning */ cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; /* Max timeout for retuning */ cconf5 |= RETUNING_TIMER_CNT_MAX; } if (mhost->caps & MMC_CAP_UHS_SDR104) { /* * SDR104 implies the HC can support HS200 mode, so * it's mandatory to use 1.8V */ cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; cconf4 |= ST_MMC_CCONFIG_SDR104; /* Max timeout for retuning */ cconf5 |= RETUNING_TIMER_CNT_MAX; } if (mhost->caps & MMC_CAP_UHS_DDR50) cconf4 |= ST_MMC_CCONFIG_DDR50; writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); } static inline void st_mmcss_set_dll(void __iomem *ioaddr) { if (!ioaddr) return; writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); } static int st_mmcss_lock_dll(void __iomem *ioaddr) { unsigned long curr, value; unsigned long finish = jiffies + HZ; /* Checks if the DLL procedure is finished */ do { curr = jiffies; value = readl(ioaddr + ST_MMC_STATUS_R); if (value & 0x1) return 0; cpu_relax(); } while (!time_after_eq(curr, finish)); return -EBUSY; } static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) { int ret = 0; struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); if (host->clock > CLK_TO_CHECK_DLL_LOCK) { st_mmcss_set_dll(pdata->top_ioaddr); ret = st_mmcss_lock_dll(host->ioaddr); } return ret; } static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); int ret = 0; /* Select Bus Speed Mode for host */ ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; switch (uhs) { /* * Set V18_EN -- UHS modes do not work without this. * does not change signaling voltage */ case MMC_TIMING_UHS_SDR12: st_mmcss_set_static_delay(pdata->top_ioaddr); ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; break; case MMC_TIMING_UHS_SDR25: st_mmcss_set_static_delay(pdata->top_ioaddr); ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; break; case MMC_TIMING_UHS_SDR50: st_mmcss_set_static_delay(pdata->top_ioaddr); ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; ret = sdhci_st_set_dll_for_clock(host); break; case MMC_TIMING_UHS_SDR104: case MMC_TIMING_MMC_HS200: st_mmcss_set_static_delay(pdata->top_ioaddr); ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; ret = sdhci_st_set_dll_for_clock(host); break; case MMC_TIMING_UHS_DDR50: case MMC_TIMING_MMC_DDR52: st_mmcss_set_static_delay(pdata->top_ioaddr); ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; break; } if (ret) dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " "(uhs %d)\n", uhs); dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); } static u32 sdhci_st_readl(struct sdhci_host *host, int reg) { u32 ret; switch (reg) { case SDHCI_CAPABILITIES: ret = readl_relaxed(host->ioaddr + reg); /* Support 3.3V and 1.8V */ ret &= ~SDHCI_CAN_VDD_300; break; default: ret = readl_relaxed(host->ioaddr + reg); } return ret; } static const struct sdhci_ops sdhci_st_ops = { .get_max_clock = sdhci_pltfm_clk_get_max_clock, .set_clock = sdhci_set_clock, .set_bus_width = sdhci_set_bus_width, .read_l = sdhci_st_readl, .reset = sdhci_reset, .set_uhs_signaling = sdhci_st_set_uhs_signaling, }; static const struct sdhci_pltfm_data sdhci_st_pdata = { .ops = &sdhci_st_ops, .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | SDHCI_QUIRK_NO_HISPD_BIT, .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC, }; static int sdhci_st_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct sdhci_host *host; struct st_mmc_platform_data *pdata; struct sdhci_pltfm_host *pltfm_host; struct clk *clk, *icnclk; int ret = 0; u16 host_version; struct reset_control *rstc; clk = devm_clk_get(&pdev->dev, "mmc"); if (IS_ERR(clk)) { dev_err(&pdev->dev, "Peripheral clk not found\n"); return PTR_ERR(clk); } /* ICN clock isn't compulsory, but use it if it's provided. */ icnclk = devm_clk_get(&pdev->dev, "icn"); if (IS_ERR(icnclk)) icnclk = NULL; rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); if (IS_ERR(rstc)) return PTR_ERR(rstc); reset_control_deassert(rstc); host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, sizeof(*pdata)); if (IS_ERR(host)) { dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); ret = PTR_ERR(host); goto err_pltfm_init; } pltfm_host = sdhci_priv(host); pdata = sdhci_pltfm_priv(pltfm_host); pdata->rstc = rstc; ret = mmc_of_parse(host->mmc); if (ret) { dev_err(&pdev->dev, "Failed mmc_of_parse\n"); goto err_of; } ret = clk_prepare_enable(clk); if (ret) { dev_err(&pdev->dev, "Failed to prepare clock\n"); goto err_of; } ret = clk_prepare_enable(icnclk); if (ret) { dev_err(&pdev->dev, "Failed to prepare icn clock\n"); goto err_icnclk; } /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ pdata->top_ioaddr = devm_platform_ioremap_resource_byname(pdev, "top-mmc-delay"); if (IS_ERR(pdata->top_ioaddr)) pdata->top_ioaddr = NULL; pltfm_host->clk = clk; pdata->icnclk = icnclk; /* Configure the Arasan HC inside the flashSS */ st_mmcss_cconfig(np, host); ret = sdhci_add_host(host); if (ret) goto err_out; host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), ((host_version & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT)); return 0; err_out: clk_disable_unprepare(icnclk); err_icnclk: clk_disable_unprepare(clk); err_of: sdhci_pltfm_free(pdev); err_pltfm_init: reset_control_assert(rstc); return ret; } static void sdhci_st_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); struct reset_control *rstc = pdata->rstc; struct clk *clk = pltfm_host->clk; sdhci_pltfm_remove(pdev); clk_disable_unprepare(pdata->icnclk); clk_disable_unprepare(clk); reset_control_assert(rstc); } #ifdef CONFIG_PM_SLEEP static int sdhci_st_suspend(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); int ret; if (host->tuning_mode != SDHCI_TUNING_MODE_3) mmc_retune_needed(host->mmc); ret = sdhci_suspend_host(host); if (ret) goto out; reset_control_assert(pdata->rstc); clk_disable_unprepare(pdata->icnclk); clk_disable_unprepare(pltfm_host->clk); out: return ret; } static int sdhci_st_resume(struct device *dev) { struct sdhci_host *host = dev_get_drvdata(dev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); struct device_node *np = dev->of_node; int ret; ret = clk_prepare_enable(pltfm_host->clk); if (ret) return ret; ret = clk_prepare_enable(pdata->icnclk); if (ret) { clk_disable_unprepare(pltfm_host->clk); return ret; } reset_control_deassert(pdata->rstc); st_mmcss_cconfig(np, host); return sdhci_resume_host(host); } #endif static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); static const struct of_device_id st_sdhci_match[] = { { .compatible = "st,sdhci" }, {}, }; MODULE_DEVICE_TABLE(of, st_sdhci_match); static struct platform_driver sdhci_st_driver = { .probe = sdhci_st_probe, .remove_new = sdhci_st_remove, .driver = { .name = "sdhci-st", .probe_type = PROBE_PREFER_ASYNCHRONOUS, .pm = &sdhci_st_pmops, .of_match_table = st_sdhci_match, }, }; module_platform_driver(sdhci_st_driver); MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:sdhci-st");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1