Contributors: 8
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Giuseppe Cavallaro |
335 |
73.79% |
1 |
10.00% |
| Ioana Ciornei |
76 |
16.74% |
2 |
20.00% |
| David Woodhouse |
29 |
6.39% |
1 |
10.00% |
| Christian Hohnstaedt |
5 |
1.10% |
1 |
10.00% |
| Andrew Lunn |
4 |
0.88% |
2 |
20.00% |
| Heiner Kallweit |
2 |
0.44% |
1 |
10.00% |
| Johan Hovold |
2 |
0.44% |
1 |
10.00% |
| Uwe Kleine-König |
1 |
0.22% |
1 |
10.00% |
| Total |
454 |
|
10 |
|
// SPDX-License-Identifier: GPL-2.0+
/*
* drivers/net/phy/ste10Xp.c
*
* Driver for STMicroelectronics STe10Xp PHYs
*
* Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
*
* Copyright (c) 2008 STMicroelectronics Limited
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#define MII_XCIIS 0x11 /* Configuration Info IRQ & Status Reg */
#define MII_XIE 0x12 /* Interrupt Enable Register */
#define MII_XIE_DEFAULT_MASK 0x0070 /* ANE complete, Remote Fault, Link Down */
#define STE101P_PHY_ID 0x00061c50
#define STE100P_PHY_ID 0x1c040011
static int ste10Xp_config_init(struct phy_device *phydev)
{
int value, err;
/* Software Reset PHY */
value = phy_read(phydev, MII_BMCR);
if (value < 0)
return value;
value |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, value);
if (err < 0)
return err;
do {
value = phy_read(phydev, MII_BMCR);
} while (value & BMCR_RESET);
return 0;
}
static int ste10Xp_ack_interrupt(struct phy_device *phydev)
{
int err = phy_read(phydev, MII_XCIIS);
if (err < 0)
return err;
return 0;
}
static int ste10Xp_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
/* clear any pending interrupts */
err = ste10Xp_ack_interrupt(phydev);
if (err)
return err;
/* Enable all STe101P interrupts (PR12) */
err = phy_write(phydev, MII_XIE, MII_XIE_DEFAULT_MASK);
} else {
err = phy_write(phydev, MII_XIE, 0);
if (err)
return err;
err = ste10Xp_ack_interrupt(phydev);
}
return err;
}
static irqreturn_t ste10Xp_handle_interrupt(struct phy_device *phydev)
{
int irq_status;
irq_status = phy_read(phydev, MII_XCIIS);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & MII_XIE_DEFAULT_MASK))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static struct phy_driver ste10xp_pdriver[] = {
{
.phy_id = STE101P_PHY_ID,
.phy_id_mask = 0xfffffff0,
.name = "STe101p",
/* PHY_BASIC_FEATURES */
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = STE100P_PHY_ID,
.phy_id_mask = 0xffffffff,
.name = "STe100p",
/* PHY_BASIC_FEATURES */
.config_init = ste10Xp_config_init,
.config_intr = ste10Xp_config_intr,
.handle_interrupt = ste10Xp_handle_interrupt,
.suspend = genphy_suspend,
.resume = genphy_resume,
} };
module_phy_driver(ste10xp_pdriver);
static struct mdio_device_id __maybe_unused ste10Xp_tbl[] = {
{ STE101P_PHY_ID, 0xfffffff0 },
{ STE100P_PHY_ID, 0xffffffff },
{ }
};
MODULE_DEVICE_TABLE(mdio, ste10Xp_tbl);
MODULE_DESCRIPTION("STMicroelectronics STe10Xp PHY driver");
MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
MODULE_LICENSE("GPL");