| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Kumar Gala | 874 | 99.09% | 1 | 20.00% |
| Chunfeng Yun | 3 | 0.34% | 1 | 20.00% |
| Uwe Kleine-König | 2 | 0.23% | 1 | 20.00% |
| Thomas Gleixner | 2 | 0.23% | 1 | 20.00% |
| Axel Lin | 1 | 0.11% | 1 | 20.00% |
| Total | 882 | 5 |
// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2014, The Linux Foundation. All rights reserved. */ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/time.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> struct qcom_ipq806x_sata_phy { void __iomem *mmio; struct clk *cfg_clk; struct device *dev; }; #define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) #define SATA_PHY_P0_PARAM0 0x200 #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12) #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12) #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6) #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6) #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0) #define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0) #define SATA_PHY_P0_PARAM1 0x204 #define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0) #define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0) #define SATA_PHY_P0_PARAM2 0x208 #define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18) #define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18) #define SATA_PHY_P0_PARAM3 0x20C #define SATA_PHY_SSC_EN 0x8 #define SATA_PHY_P0_PARAM4 0x210 #define SATA_PHY_REF_SSP_EN 0x2 #define SATA_PHY_RESET 0x1 static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy) { struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); u32 reg; /* Setting SSC_EN to 1 */ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3); reg = reg | SATA_PHY_SSC_EN; writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3); reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) & ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK | SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK | SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK); reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf); writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0); reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) & ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK | SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK | SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK); reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) | SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) | SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55); writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1); reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) & ~SATA_PHY_P0_PARAM2_RX_EQ_MASK; reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3); writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2); /* Setting PHY_RESET to 1 */ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); reg = reg | SATA_PHY_RESET; writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); /* Setting REF_SSP_EN to 1 */ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET; writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); /* make sure all changes complete before we let the PHY out of reset */ mb(); /* sleep for max. 50us more to combine processor wakeups */ usleep_range(20, 20 + 50); /* Clearing PHY_RESET to 0 */ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); reg = reg & ~SATA_PHY_RESET; writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); return 0; } static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy) { struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); u32 reg; /* Setting PHY_RESET to 1 */ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); reg = reg | SATA_PHY_RESET; writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); return 0; } static const struct phy_ops qcom_ipq806x_sata_phy_ops = { .init = qcom_ipq806x_sata_phy_init, .exit = qcom_ipq806x_sata_phy_exit, .owner = THIS_MODULE, }; static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) { struct qcom_ipq806x_sata_phy *phy; struct device *dev = &pdev->dev; struct phy_provider *phy_provider; struct phy *generic_phy; int ret; phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); if (!phy) return -ENOMEM; phy->mmio = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(phy->mmio)) return PTR_ERR(phy->mmio); generic_phy = devm_phy_create(dev, NULL, &qcom_ipq806x_sata_phy_ops); if (IS_ERR(generic_phy)) { dev_err(dev, "%s: failed to create phy\n", __func__); return PTR_ERR(generic_phy); } phy->dev = dev; phy_set_drvdata(generic_phy, phy); platform_set_drvdata(pdev, phy); phy->cfg_clk = devm_clk_get(dev, "cfg"); if (IS_ERR(phy->cfg_clk)) { dev_err(dev, "Failed to get sata cfg clock\n"); return PTR_ERR(phy->cfg_clk); } ret = clk_prepare_enable(phy->cfg_clk); if (ret) return ret; phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { clk_disable_unprepare(phy->cfg_clk); dev_err(dev, "%s: failed to register phy\n", __func__); return PTR_ERR(phy_provider); } return 0; } static void qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) { struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); clk_disable_unprepare(phy->cfg_clk); } static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = { { .compatible = "qcom,ipq806x-sata-phy" }, { }, }; MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match); static struct platform_driver qcom_ipq806x_sata_phy_driver = { .probe = qcom_ipq806x_sata_phy_probe, .remove_new = qcom_ipq806x_sata_phy_remove, .driver = { .name = "qcom-ipq806x-sata-phy", .of_match_table = qcom_ipq806x_sata_phy_of_match, } }; module_platform_driver(qcom_ipq806x_sata_phy_driver); MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1