Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Lyndon Sanche | 812 | 90.93% | 1 | 8.33% |
Matthew Garrett | 29 | 3.25% | 1 | 8.33% |
Mario Limonciello | 27 | 3.02% | 3 | 25.00% |
Michał Kępień | 12 | 1.34% | 1 | 8.33% |
Thomas Weißschuh | 6 | 0.67% | 1 | 8.33% |
Gabriele Mazzotta | 2 | 0.22% | 1 | 8.33% |
Linus Torvalds (pre-git) | 2 | 0.22% | 1 | 8.33% |
Thomas Gleixner | 1 | 0.11% | 1 | 8.33% |
Linus Torvalds | 1 | 0.11% | 1 | 8.33% |
Darren Hart | 1 | 0.11% | 1 | 8.33% |
Total | 893 | 12 |
// SPDX-License-Identifier: GPL-2.0-only /* * Driver for Dell laptop extras * * Copyright (c) Lyndon Sanche <lsanche@lyndeno.ca> * * Based on documentation in the libsmbios package: * Copyright (C) 2005-2014 Dell Inc. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include <linux/bitfield.h> #include <linux/bits.h> #include <linux/dmi.h> #include <linux/err.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_profile.h> #include <linux/slab.h> #include "dell-smbios.h" static const struct dmi_system_id dell_device_table[] __initconst = { { .ident = "Dell Inc.", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), }, }, { .ident = "Dell Computer Corporation", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), }, }, { } }; MODULE_DEVICE_TABLE(dmi, dell_device_table); /* Derived from smbios-thermal-ctl * * cbClass 17 * cbSelect 19 * User Selectable Thermal Tables(USTT) * cbArg1 determines the function to be performed * cbArg1 0x0 = Get Thermal Information * cbRES1 Standard return codes (0, -1, -2) * cbRES2, byte 0 Bitmap of supported thermal modes. A mode is supported if * its bit is set to 1 * Bit 0 Balanced * Bit 1 Cool Bottom * Bit 2 Quiet * Bit 3 Performance * cbRES2, byte 1 Bitmap of supported Active Acoustic Controller (AAC) modes. * Each mode corresponds to the supported thermal modes in * byte 0. A mode is supported if its bit is set to 1. * Bit 0 AAC (Balanced) * Bit 1 AAC (Cool Bottom * Bit 2 AAC (Quiet) * Bit 3 AAC (Performance) * cbRes3, byte 0 Current Thermal Mode * Bit 0 Balanced * Bit 1 Cool Bottom * Bit 2 Quiet * Bit 3 Performanc * cbRes3, byte 1 AAC Configuration type * 0 Global (AAC enable/disable applies to all supported USTT modes) * 1 USTT mode specific * cbRes3, byte 2 Current Active Acoustic Controller (AAC) Mode * If AAC Configuration Type is Global, * 0 AAC mode disabled * 1 AAC mode enabled * If AAC Configuration Type is USTT mode specific (multiple bits may be set), * Bit 0 AAC (Balanced) * Bit 1 AAC (Cool Bottom * Bit 2 AAC (Quiet) * Bit 3 AAC (Performance) * cbRes3, byte 3 Current Fan Failure Mode * Bit 0 Minimal Fan Failure (at least one fan has failed, one fan working) * Bit 1 Catastrophic Fan Failure (all fans have failed) * * cbArg1 0x1 (Set Thermal Information), both desired thermal mode and * desired AAC mode shall be applied * cbArg2, byte 0 Desired Thermal Mode to set * (only one bit may be set for this parameter) * Bit 0 Balanced * Bit 1 Cool Bottom * Bit 2 Quiet * Bit 3 Performance * cbArg2, byte 1 Desired Active Acoustic Controller (AAC) Mode to set * If AAC Configuration Type is Global, * 0 AAC mode disabled * 1 AAC mode enabled * If AAC Configuration Type is USTT mode specific * (multiple bits may be set for this parameter), * Bit 0 AAC (Balanced) * Bit 1 AAC (Cool Bottom * Bit 2 AAC (Quiet) * Bit 3 AAC (Performance) */ #define DELL_ACC_GET_FIELD GENMASK(19, 16) #define DELL_ACC_SET_FIELD GENMASK(11, 8) #define DELL_THERMAL_SUPPORTED GENMASK(3, 0) static struct platform_profile_handler *thermal_handler; enum thermal_mode_bits { DELL_BALANCED = BIT(0), DELL_COOL_BOTTOM = BIT(1), DELL_QUIET = BIT(2), DELL_PERFORMANCE = BIT(3), }; static int thermal_get_mode(void) { struct calling_interface_buffer buffer; int state; int ret; dell_fill_request(&buffer, 0x0, 0, 0, 0); ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); if (ret) return ret; state = buffer.output[2]; if (state & DELL_BALANCED) return DELL_BALANCED; else if (state & DELL_COOL_BOTTOM) return DELL_COOL_BOTTOM; else if (state & DELL_QUIET) return DELL_QUIET; else if (state & DELL_PERFORMANCE) return DELL_PERFORMANCE; else return -ENXIO; } static int thermal_get_supported_modes(int *supported_bits) { struct calling_interface_buffer buffer; int ret; dell_fill_request(&buffer, 0x0, 0, 0, 0); ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); /* Thermal function not supported */ if (ret == -ENXIO) { *supported_bits = 0; return 0; } if (ret) return ret; *supported_bits = FIELD_GET(DELL_THERMAL_SUPPORTED, buffer.output[1]); return 0; } static int thermal_get_acc_mode(int *acc_mode) { struct calling_interface_buffer buffer; int ret; dell_fill_request(&buffer, 0x0, 0, 0, 0); ret = dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); if (ret) return ret; *acc_mode = FIELD_GET(DELL_ACC_GET_FIELD, buffer.output[3]); return 0; } static int thermal_set_mode(enum thermal_mode_bits state) { struct calling_interface_buffer buffer; int ret; int acc_mode; ret = thermal_get_acc_mode(&acc_mode); if (ret) return ret; dell_fill_request(&buffer, 0x1, FIELD_PREP(DELL_ACC_SET_FIELD, acc_mode) | state, 0, 0); return dell_send_request(&buffer, CLASS_INFO, SELECT_THERMAL_MANAGEMENT); } static int thermal_platform_profile_set(struct platform_profile_handler *pprof, enum platform_profile_option profile) { switch (profile) { case PLATFORM_PROFILE_BALANCED: return thermal_set_mode(DELL_BALANCED); case PLATFORM_PROFILE_PERFORMANCE: return thermal_set_mode(DELL_PERFORMANCE); case PLATFORM_PROFILE_QUIET: return thermal_set_mode(DELL_QUIET); case PLATFORM_PROFILE_COOL: return thermal_set_mode(DELL_COOL_BOTTOM); default: return -EOPNOTSUPP; } } static int thermal_platform_profile_get(struct platform_profile_handler *pprof, enum platform_profile_option *profile) { int ret; ret = thermal_get_mode(); if (ret < 0) return ret; switch (ret) { case DELL_BALANCED: *profile = PLATFORM_PROFILE_BALANCED; break; case DELL_PERFORMANCE: *profile = PLATFORM_PROFILE_PERFORMANCE; break; case DELL_COOL_BOTTOM: *profile = PLATFORM_PROFILE_COOL; break; case DELL_QUIET: *profile = PLATFORM_PROFILE_QUIET; break; default: return -EINVAL; } return 0; } static int thermal_init(void) { int ret; int supported_modes; /* If thermal commands are not supported, exit without error */ if (!dell_smbios_class_is_supported(CLASS_INFO)) return 0; /* If thermal modes are not supported, exit without error */ ret = thermal_get_supported_modes(&supported_modes); if (ret < 0) return ret; if (!supported_modes) return 0; thermal_handler = kzalloc(sizeof(*thermal_handler), GFP_KERNEL); if (!thermal_handler) return -ENOMEM; thermal_handler->profile_get = thermal_platform_profile_get; thermal_handler->profile_set = thermal_platform_profile_set; if (supported_modes & DELL_QUIET) set_bit(PLATFORM_PROFILE_QUIET, thermal_handler->choices); if (supported_modes & DELL_COOL_BOTTOM) set_bit(PLATFORM_PROFILE_COOL, thermal_handler->choices); if (supported_modes & DELL_BALANCED) set_bit(PLATFORM_PROFILE_BALANCED, thermal_handler->choices); if (supported_modes & DELL_PERFORMANCE) set_bit(PLATFORM_PROFILE_PERFORMANCE, thermal_handler->choices); /* Clean up if failed */ ret = platform_profile_register(thermal_handler); if (ret) { kfree(thermal_handler); thermal_handler = NULL; } return ret; } static void thermal_cleanup(void) { if (thermal_handler) { platform_profile_remove(); kfree(thermal_handler); } } static int __init dell_init(void) { int ret; if (!dmi_check_system(dell_device_table)) return -ENODEV; /* Do not fail module if thermal modes not supported, just skip */ ret = thermal_init(); if (ret) goto fail_thermal; return 0; fail_thermal: thermal_cleanup(); return ret; } static void __exit dell_exit(void) { thermal_cleanup(); } module_init(dell_init); module_exit(dell_exit); MODULE_AUTHOR("Lyndon Sanche <lsanche@lyndeno.ca>"); MODULE_DESCRIPTION("Dell PC driver"); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1