Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Alan Cox | 895 | 66.05% | 2 | 6.25% |
Mark Haverkamp | 321 | 23.69% | 11 | 34.38% |
Maximilian Attems | 40 | 2.95% | 1 | 3.12% |
Mahesh Rajashekhara | 38 | 2.80% | 3 | 9.38% |
Mark Salyzyn | 26 | 1.92% | 2 | 6.25% |
Raghava Aditya Renukunta | 7 | 0.52% | 2 | 6.25% |
Andrew Morton | 7 | 0.52% | 1 | 3.12% |
Christoph Hellwig | 6 | 0.44% | 1 | 3.12% |
Lee Jones | 3 | 0.22% | 1 | 3.12% |
Thomas Gleixner | 2 | 0.15% | 1 | 3.12% |
James Bottomley | 2 | 0.15% | 1 | 3.12% |
Adrian Bunk | 2 | 0.15% | 2 | 6.25% |
Benjamin Collins | 2 | 0.15% | 1 | 3.12% |
Linus Torvalds (pre-git) | 2 | 0.15% | 1 | 3.12% |
Arnd Bergmann | 1 | 0.07% | 1 | 3.12% |
Arnaldo Carvalho de Melo | 1 | 0.07% | 1 | 3.12% |
Total | 1355 | 32 |
// SPDX-License-Identifier: GPL-2.0-or-later /* * Adaptec AAC series RAID controller driver * (c) Copyright 2001 Red Hat Inc. * * based on the old aacraid driver that is.. * Adaptec aacraid device driver for Linux. * * Copyright (c) 2000-2010 Adaptec, Inc. * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) * * Module Name: * sa.c * * Abstract: Drawbridge specific support functions */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/types.h> #include <linux/pci.h> #include <linux/spinlock.h> #include <linux/blkdev.h> #include <linux/delay.h> #include <linux/completion.h> #include <linux/time.h> #include <linux/interrupt.h> #include <scsi/scsi_host.h> #include "aacraid.h" static irqreturn_t aac_sa_intr(int irq, void *dev_id) { struct aac_dev *dev = dev_id; unsigned short intstat, mask; intstat = sa_readw(dev, DoorbellReg_p); /* * Read mask and invert because drawbridge is reversed. * This allows us to only service interrupts that have been enabled. */ mask = ~(sa_readw(dev, SaDbCSR.PRISETIRQMASK)); /* Check to see if this is our interrupt. If it isn't just return */ if (intstat & mask) { if (intstat & PrintfReady) { aac_printf(dev, sa_readl(dev, Mailbox5)); sa_writew(dev, DoorbellClrReg_p, PrintfReady); /* clear PrintfReady */ sa_writew(dev, DoorbellReg_s, PrintfDone); } else if (intstat & DOORBELL_1) { // dev -> Host Normal Command Ready sa_writew(dev, DoorbellClrReg_p, DOORBELL_1); aac_command_normal(&dev->queues->queue[HostNormCmdQueue]); } else if (intstat & DOORBELL_2) { // dev -> Host Normal Response Ready sa_writew(dev, DoorbellClrReg_p, DOORBELL_2); aac_response_normal(&dev->queues->queue[HostNormRespQueue]); } else if (intstat & DOORBELL_3) { // dev -> Host Normal Command Not Full sa_writew(dev, DoorbellClrReg_p, DOORBELL_3); } else if (intstat & DOORBELL_4) { // dev -> Host Normal Response Not Full sa_writew(dev, DoorbellClrReg_p, DOORBELL_4); } return IRQ_HANDLED; } return IRQ_NONE; } /** * aac_sa_disable_interrupt - disable interrupt * @dev: Which adapter to enable. */ static void aac_sa_disable_interrupt (struct aac_dev *dev) { sa_writew(dev, SaDbCSR.PRISETIRQMASK, 0xffff); } /** * aac_sa_enable_interrupt - enable interrupt * @dev: Which adapter to enable. */ static void aac_sa_enable_interrupt (struct aac_dev *dev) { sa_writew(dev, SaDbCSR.PRICLEARIRQMASK, (PrintfReady | DOORBELL_1 | DOORBELL_2 | DOORBELL_3 | DOORBELL_4)); } /** * aac_sa_notify_adapter - handle adapter notification * @dev: Adapter that notification is for * @event: Event to notidy * * Notify the adapter of an event */ static void aac_sa_notify_adapter(struct aac_dev *dev, u32 event) { switch (event) { case AdapNormCmdQue: sa_writew(dev, DoorbellReg_s,DOORBELL_1); break; case HostNormRespNotFull: sa_writew(dev, DoorbellReg_s,DOORBELL_4); break; case AdapNormRespQue: sa_writew(dev, DoorbellReg_s,DOORBELL_2); break; case HostNormCmdNotFull: sa_writew(dev, DoorbellReg_s,DOORBELL_3); break; case HostShutdown: /* sa_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); */ break; case FastIo: sa_writew(dev, DoorbellReg_s,DOORBELL_6); break; case AdapPrintfDone: sa_writew(dev, DoorbellReg_s,DOORBELL_5); break; default: BUG(); break; } } /** * sa_sync_cmd - send a command and wait * @dev: Adapter * @command: Command to execute * @p1: first parameter * @p2: second parameter * @p3: third parameter * @p4: forth parameter * @p5: fifth parameter * @p6: sixth parameter * @ret: adapter status * @r1: first return value * @r2: second return value * @r3: third return value * @r4: forth return value * * This routine will send a synchronous command to the adapter and wait * for its completion. */ static int sa_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, u32 *ret, u32 *r1, u32 *r2, u32 *r3, u32 *r4) { unsigned long start; int ok; /* * Write the Command into Mailbox 0 */ sa_writel(dev, Mailbox0, command); /* * Write the parameters into Mailboxes 1 - 4 */ sa_writel(dev, Mailbox1, p1); sa_writel(dev, Mailbox2, p2); sa_writel(dev, Mailbox3, p3); sa_writel(dev, Mailbox4, p4); /* * Clear the synch command doorbell to start on a clean slate. */ sa_writew(dev, DoorbellClrReg_p, DOORBELL_0); /* * Signal that there is a new synch command */ sa_writew(dev, DoorbellReg_s, DOORBELL_0); ok = 0; start = jiffies; while(time_before(jiffies, start+30*HZ)) { /* * Delay 5uS so that the monitor gets access */ udelay(5); /* * Mon110 will set doorbell0 bit when it has * completed the command. */ if(sa_readw(dev, DoorbellReg_p) & DOORBELL_0) { ok = 1; break; } msleep(1); } if (ok != 1) return -ETIMEDOUT; /* * Clear the synch command doorbell. */ sa_writew(dev, DoorbellClrReg_p, DOORBELL_0); /* * Pull the synch status from Mailbox 0. */ if (ret) *ret = sa_readl(dev, Mailbox0); if (r1) *r1 = sa_readl(dev, Mailbox1); if (r2) *r2 = sa_readl(dev, Mailbox2); if (r3) *r3 = sa_readl(dev, Mailbox3); if (r4) *r4 = sa_readl(dev, Mailbox4); return 0; } /** * aac_sa_interrupt_adapter - interrupt an adapter * @dev: Which adapter to enable. * * Breakpoint an adapter. */ static void aac_sa_interrupt_adapter (struct aac_dev *dev) { sa_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** * aac_sa_start_adapter - activate adapter * @dev: Adapter * * Start up processing on an ARM based AAC adapter */ static void aac_sa_start_adapter(struct aac_dev *dev) { union aac_init *init; /* * Fill in the remaining pieces of the init. */ init = dev->init; init->r7.host_elapsed_seconds = cpu_to_le32(ktime_get_real_seconds()); /* We can only use a 32 bit address here */ sa_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } static int aac_sa_restart_adapter(struct aac_dev *dev, int bled, u8 reset_type) { return -EINVAL; } /** * aac_sa_check_health * @dev: device to check if healthy * * Will attempt to determine if the specified adapter is alive and * capable of handling requests, returning 0 if alive. */ static int aac_sa_check_health(struct aac_dev *dev) { long status = sa_readl(dev, Mailbox7); /* * Check to see if the board failed any self tests. */ if (status & SELF_TEST_FAILED) return -1; /* * Check to see if the board panic'd while booting. */ if (status & KERNEL_PANIC) return -2; /* * Wait for the adapter to be up and running. Wait up to 3 minutes */ if (!(status & KERNEL_UP_AND_RUNNING)) return -3; /* * Everything is OK */ return 0; } /** * aac_sa_ioremap * @dev: device to ioremap * @size: mapping resize request * */ static int aac_sa_ioremap(struct aac_dev * dev, u32 size) { if (!size) { iounmap(dev->regs.sa); return 0; } dev->base = dev->regs.sa = ioremap(dev->base_start, size); return (dev->base == NULL) ? -1 : 0; } /** * aac_sa_init - initialize an ARM based AAC card * @dev: device to configure * * Allocate and set up resources for the ARM based AAC variants. The * device_interface in the commregion will be allocated and linked * to the comm region. */ int aac_sa_init(struct aac_dev *dev) { unsigned long start; unsigned long status; int instance; const char *name; instance = dev->id; name = dev->name; /* * Fill in the function dispatch table. */ dev->a_ops.adapter_interrupt = aac_sa_interrupt_adapter; dev->a_ops.adapter_disable_int = aac_sa_disable_interrupt; dev->a_ops.adapter_enable_int = aac_sa_enable_interrupt; dev->a_ops.adapter_notify = aac_sa_notify_adapter; dev->a_ops.adapter_sync_cmd = sa_sync_cmd; dev->a_ops.adapter_check_health = aac_sa_check_health; dev->a_ops.adapter_restart = aac_sa_restart_adapter; dev->a_ops.adapter_start = aac_sa_start_adapter; dev->a_ops.adapter_intr = aac_sa_intr; dev->a_ops.adapter_deliver = aac_rx_deliver_producer; dev->a_ops.adapter_ioremap = aac_sa_ioremap; if (aac_sa_ioremap(dev, dev->base_size)) { printk(KERN_WARNING "%s: unable to map adapter.\n", name); goto error_iounmap; } /* * Check to see if the board failed any self tests. */ if (sa_readl(dev, Mailbox7) & SELF_TEST_FAILED) { printk(KERN_WARNING "%s%d: adapter self-test failed.\n", name, instance); goto error_iounmap; } /* * Check to see if the board panic'd while booting. */ if (sa_readl(dev, Mailbox7) & KERNEL_PANIC) { printk(KERN_WARNING "%s%d: adapter kernel panic'd.\n", name, instance); goto error_iounmap; } start = jiffies; /* * Wait for the adapter to be up and running. Wait up to 3 minutes. */ while (!(sa_readl(dev, Mailbox7) & KERNEL_UP_AND_RUNNING)) { if (time_after(jiffies, start+startup_timeout*HZ)) { status = sa_readl(dev, Mailbox7); printk(KERN_WARNING "%s%d: adapter kernel failed to start, init status = %lx.\n", name, instance, status); goto error_iounmap; } msleep(1); } /* * First clear out all interrupts. Then enable the one's that * we can handle. */ aac_adapter_disable_int(dev); aac_adapter_enable_int(dev); if(aac_init_adapter(dev) == NULL) goto error_irq; dev->sync_mode = 0; /* sync. mode not supported */ if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr, IRQF_SHARED, "aacraid", (void *)dev) < 0) { printk(KERN_WARNING "%s%d: Interrupt unavailable.\n", name, instance); goto error_iounmap; } dev->dbg_base = dev->base_start; dev->dbg_base_mapped = dev->base; dev->dbg_size = dev->base_size; aac_adapter_enable_int(dev); /* * Tell the adapter that all is configure, and it can start * accepting requests */ aac_sa_start_adapter(dev); return 0; error_irq: aac_sa_disable_interrupt(dev); free_irq(dev->pdev->irq, (void *)dev); error_iounmap: return -1; }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1