Contributors: 55
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Andrea Paterniani |
2020 |
52.59% |
1 |
1.16% |
| Ian Abbott |
392 |
10.21% |
3 |
3.49% |
| David Brownell |
296 |
7.71% |
5 |
5.81% |
| Andy Shevchenko |
222 |
5.78% |
7 |
8.14% |
| Mark Brown |
135 |
3.51% |
4 |
4.65% |
| Ray Jui |
103 |
2.68% |
1 |
1.16% |
| Bartosz Golaszewski |
77 |
2.00% |
3 |
3.49% |
| Geert Uytterhoeven |
60 |
1.56% |
4 |
4.65% |
| Bernhard Walle |
42 |
1.09% |
1 |
1.16% |
| Mika Westerberg |
37 |
0.96% |
1 |
1.16% |
| Maxime Ripard |
37 |
0.96% |
2 |
2.33% |
| Vincent Tremblay |
32 |
0.83% |
2 |
2.33% |
| Christian Eggers |
26 |
0.68% |
1 |
1.16% |
| Alexander Sverdlin |
25 |
0.65% |
1 |
1.16% |
| Alexandru Ardelean |
22 |
0.57% |
2 |
2.33% |
| Martin Sperl |
21 |
0.55% |
1 |
1.16% |
| Greg Kroah-Hartman |
21 |
0.55% |
2 |
2.33% |
| Oleksandr Suvorov |
20 |
0.52% |
2 |
2.33% |
| Lukasz Majewski |
19 |
0.49% |
2 |
2.33% |
| Alan Cox |
19 |
0.49% |
1 |
1.16% |
| Lukas Wunner |
18 |
0.47% |
1 |
1.16% |
| Duan Zhenzhong |
14 |
0.36% |
1 |
1.16% |
| Jakob Koschel |
13 |
0.34% |
1 |
1.16% |
| Herve Codina via Alsa-devel |
13 |
0.34% |
1 |
1.16% |
| Al Viro |
12 |
0.31% |
2 |
2.33% |
| Daniel Walker |
12 |
0.31% |
1 |
1.16% |
| Dan Carpenter |
12 |
0.31% |
1 |
1.16% |
| Domen Puncer |
11 |
0.29% |
2 |
2.33% |
| Jan Kundrát |
10 |
0.26% |
1 |
1.16% |
| Wolfgang Ocker |
9 |
0.23% |
1 |
1.16% |
| Jiri Prchal |
8 |
0.21% |
1 |
1.16% |
| Shivamurthy Shastri |
8 |
0.21% |
1 |
1.16% |
| Krzysztof Kozlowski |
7 |
0.18% |
1 |
1.16% |
| Mike Frysinger |
6 |
0.16% |
1 |
1.16% |
| Marek Vašut |
6 |
0.16% |
1 |
1.16% |
| Christoph Niedermaier |
6 |
0.16% |
1 |
1.16% |
| Florian Fainelli |
6 |
0.16% |
1 |
1.16% |
| Arnd Bergmann |
5 |
0.13% |
1 |
1.16% |
| Thadeu Lima de Souza Cascardo |
5 |
0.13% |
1 |
1.16% |
| Anton Vorontsov |
5 |
0.13% |
1 |
1.16% |
| Sebastian Andrzej Siewior |
4 |
0.10% |
1 |
1.16% |
| Florin Malita |
4 |
0.10% |
1 |
1.16% |
| Fabien Lahoudere |
4 |
0.10% |
1 |
1.16% |
| Uwe Kleine-König |
3 |
0.08% |
3 |
3.49% |
| Thomas Gleixner |
2 |
0.05% |
1 |
1.16% |
| Ben Whitten |
2 |
0.05% |
1 |
1.16% |
| Fabio Estevam |
2 |
0.05% |
2 |
2.33% |
| Jingoo Han |
1 |
0.03% |
1 |
1.16% |
| Catalin Marinas |
1 |
0.03% |
1 |
1.16% |
| Conor Dooley |
1 |
0.03% |
1 |
1.16% |
| Boerge Struempfel |
1 |
0.03% |
1 |
1.16% |
| Geliang Tang |
1 |
0.03% |
1 |
1.16% |
| Alexey Dobriyan |
1 |
0.03% |
1 |
1.16% |
| Rusty Russell |
1 |
0.03% |
1 |
1.16% |
| Kirill Smelkov |
1 |
0.03% |
1 |
1.16% |
| Total |
3841 |
|
86 |
|
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Simple synchronous userspace interface to SPI devices
*
* Copyright (C) 2006 SWAPP
* Andrea Paterniani <a.paterniani@swapp-eng.it>
* Copyright (C) 2007 David Brownell (simplification, cleanup)
*/
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/property.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/spi/spi.h>
#include <linux/spi/spidev.h>
#include <linux/uaccess.h>
/*
* This supports access to SPI devices using normal userspace I/O calls.
* Note that while traditional UNIX/POSIX I/O semantics are half duplex,
* and often mask message boundaries, full SPI support requires full duplex
* transfers. There are several kinds of internal message boundaries to
* handle chipselect management and other protocol options.
*
* SPI has a character major number assigned. We allocate minor numbers
* dynamically using a bitmask. You must use hotplug tools, such as udev
* (or mdev with busybox) to create and destroy the /dev/spidevB.C device
* nodes, since there is no fixed association of minor numbers with any
* particular SPI bus or device.
*/
#define SPIDEV_MAJOR 153 /* assigned */
#define N_SPI_MINORS 32 /* ... up to 256 */
static DECLARE_BITMAP(minors, N_SPI_MINORS);
static_assert(N_SPI_MINORS > 0 && N_SPI_MINORS <= 256);
/* Bit masks for spi_device.mode management. Note that incorrect
* settings for some settings can cause *lots* of trouble for other
* devices on a shared bus:
*
* - CS_HIGH ... this device will be active when it shouldn't be
* - 3WIRE ... when active, it won't behave as it should
* - NO_CS ... there will be no explicit message boundaries; this
* is completely incompatible with the shared bus model
* - READY ... transfers may proceed when they shouldn't.
*
* REVISIT should changing those flags be privileged?
*/
#define SPI_MODE_MASK (SPI_MODE_X_MASK | SPI_CS_HIGH \
| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
| SPI_NO_CS | SPI_READY | SPI_TX_DUAL \
| SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL \
| SPI_RX_QUAD | SPI_RX_OCTAL \
| SPI_RX_CPHA_FLIP | SPI_3WIRE_HIZ \
| SPI_MOSI_IDLE_LOW)
struct spidev_data {
dev_t devt;
struct mutex spi_lock;
struct spi_device *spi;
struct list_head device_entry;
/* TX/RX buffers are NULL unless this device is open (users > 0) */
struct mutex buf_lock;
unsigned users;
u8 *tx_buffer;
u8 *rx_buffer;
u32 speed_hz;
};
static LIST_HEAD(device_list);
static DEFINE_MUTEX(device_list_lock);
static unsigned bufsiz = 4096;
module_param(bufsiz, uint, S_IRUGO);
MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
/*-------------------------------------------------------------------------*/
static ssize_t
spidev_sync_unlocked(struct spi_device *spi, struct spi_message *message)
{
ssize_t status;
status = spi_sync(spi, message);
if (status == 0)
status = message->actual_length;
return status;
}
static ssize_t
spidev_sync(struct spidev_data *spidev, struct spi_message *message)
{
ssize_t status;
struct spi_device *spi;
mutex_lock(&spidev->spi_lock);
spi = spidev->spi;
if (spi == NULL)
status = -ESHUTDOWN;
else
status = spidev_sync_unlocked(spi, message);
mutex_unlock(&spidev->spi_lock);
return status;
}
static inline ssize_t
spidev_sync_write(struct spidev_data *spidev, size_t len)
{
struct spi_transfer t = {
.tx_buf = spidev->tx_buffer,
.len = len,
.speed_hz = spidev->speed_hz,
};
struct spi_message m;
spi_message_init(&m);
spi_message_add_tail(&t, &m);
return spidev_sync(spidev, &m);
}
static inline ssize_t
spidev_sync_read(struct spidev_data *spidev, size_t len)
{
struct spi_transfer t = {
.rx_buf = spidev->rx_buffer,
.len = len,
.speed_hz = spidev->speed_hz,
};
struct spi_message m;
spi_message_init(&m);
spi_message_add_tail(&t, &m);
return spidev_sync(spidev, &m);
}
/*-------------------------------------------------------------------------*/
/* Read-only message with current device setup */
static ssize_t
spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
ssize_t status;
/* chipselect only toggles at start or end of operation */
if (count > bufsiz)
return -EMSGSIZE;
spidev = filp->private_data;
mutex_lock(&spidev->buf_lock);
status = spidev_sync_read(spidev, count);
if (status > 0) {
unsigned long missing;
missing = copy_to_user(buf, spidev->rx_buffer, status);
if (missing == status)
status = -EFAULT;
else
status = status - missing;
}
mutex_unlock(&spidev->buf_lock);
return status;
}
/* Write-only message with current device setup */
static ssize_t
spidev_write(struct file *filp, const char __user *buf,
size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
ssize_t status;
unsigned long missing;
/* chipselect only toggles at start or end of operation */
if (count > bufsiz)
return -EMSGSIZE;
spidev = filp->private_data;
mutex_lock(&spidev->buf_lock);
missing = copy_from_user(spidev->tx_buffer, buf, count);
if (missing == 0)
status = spidev_sync_write(spidev, count);
else
status = -EFAULT;
mutex_unlock(&spidev->buf_lock);
return status;
}
static int spidev_message(struct spidev_data *spidev,
struct spi_ioc_transfer *u_xfers, unsigned n_xfers)
{
struct spi_message msg;
struct spi_transfer *k_xfers;
struct spi_transfer *k_tmp;
struct spi_ioc_transfer *u_tmp;
unsigned n, total, tx_total, rx_total;
u8 *tx_buf, *rx_buf;
int status = -EFAULT;
spi_message_init(&msg);
k_xfers = kcalloc(n_xfers, sizeof(*k_tmp), GFP_KERNEL);
if (k_xfers == NULL)
return -ENOMEM;
/* Construct spi_message, copying any tx data to bounce buffer.
* We walk the array of user-provided transfers, using each one
* to initialize a kernel version of the same transfer.
*/
tx_buf = spidev->tx_buffer;
rx_buf = spidev->rx_buffer;
total = 0;
tx_total = 0;
rx_total = 0;
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
n--, k_tmp++, u_tmp++) {
/* Ensure that also following allocations from rx_buf/tx_buf will meet
* DMA alignment requirements.
*/
unsigned int len_aligned = ALIGN(u_tmp->len, ARCH_DMA_MINALIGN);
k_tmp->len = u_tmp->len;
total += k_tmp->len;
/* Since the function returns the total length of transfers
* on success, restrict the total to positive int values to
* avoid the return value looking like an error. Also check
* each transfer length to avoid arithmetic overflow.
*/
if (total > INT_MAX || k_tmp->len > INT_MAX) {
status = -EMSGSIZE;
goto done;
}
if (u_tmp->rx_buf) {
/* this transfer needs space in RX bounce buffer */
rx_total += len_aligned;
if (rx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
}
k_tmp->rx_buf = rx_buf;
rx_buf += len_aligned;
}
if (u_tmp->tx_buf) {
/* this transfer needs space in TX bounce buffer */
tx_total += len_aligned;
if (tx_total > bufsiz) {
status = -EMSGSIZE;
goto done;
}
k_tmp->tx_buf = tx_buf;
if (copy_from_user(tx_buf, (const u8 __user *)
(uintptr_t) u_tmp->tx_buf,
u_tmp->len))
goto done;
tx_buf += len_aligned;
}
k_tmp->cs_change = !!u_tmp->cs_change;
k_tmp->tx_nbits = u_tmp->tx_nbits;
k_tmp->rx_nbits = u_tmp->rx_nbits;
k_tmp->bits_per_word = u_tmp->bits_per_word;
k_tmp->delay.value = u_tmp->delay_usecs;
k_tmp->delay.unit = SPI_DELAY_UNIT_USECS;
k_tmp->speed_hz = u_tmp->speed_hz;
k_tmp->word_delay.value = u_tmp->word_delay_usecs;
k_tmp->word_delay.unit = SPI_DELAY_UNIT_USECS;
if (!k_tmp->speed_hz)
k_tmp->speed_hz = spidev->speed_hz;
#ifdef VERBOSE
dev_dbg(&spidev->spi->dev,
" xfer len %u %s%s%s%dbits %u usec %u usec %uHz\n",
k_tmp->len,
k_tmp->rx_buf ? "rx " : "",
k_tmp->tx_buf ? "tx " : "",
k_tmp->cs_change ? "cs " : "",
k_tmp->bits_per_word ? : spidev->spi->bits_per_word,
k_tmp->delay.value,
k_tmp->word_delay.value,
k_tmp->speed_hz ? : spidev->spi->max_speed_hz);
#endif
spi_message_add_tail(k_tmp, &msg);
}
status = spidev_sync_unlocked(spidev->spi, &msg);
if (status < 0)
goto done;
/* copy any rx data out of bounce buffer */
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
n--, k_tmp++, u_tmp++) {
if (u_tmp->rx_buf) {
if (copy_to_user((u8 __user *)
(uintptr_t) u_tmp->rx_buf, k_tmp->rx_buf,
u_tmp->len)) {
status = -EFAULT;
goto done;
}
}
}
status = total;
done:
kfree(k_xfers);
return status;
}
static struct spi_ioc_transfer *
spidev_get_ioc_message(unsigned int cmd, struct spi_ioc_transfer __user *u_ioc,
unsigned *n_ioc)
{
u32 tmp;
/* Check type, command number and direction */
if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC
|| _IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
|| _IOC_DIR(cmd) != _IOC_WRITE)
return ERR_PTR(-ENOTTY);
tmp = _IOC_SIZE(cmd);
if ((tmp % sizeof(struct spi_ioc_transfer)) != 0)
return ERR_PTR(-EINVAL);
*n_ioc = tmp / sizeof(struct spi_ioc_transfer);
if (*n_ioc == 0)
return NULL;
/* copy into scratch area */
return memdup_user(u_ioc, tmp);
}
static long
spidev_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
int retval = 0;
struct spidev_data *spidev;
struct spi_device *spi;
struct spi_controller *ctlr;
u32 tmp;
unsigned n_ioc;
struct spi_ioc_transfer *ioc;
/* Check type and command number */
if (_IOC_TYPE(cmd) != SPI_IOC_MAGIC)
return -ENOTTY;
/* guard against device removal before, or while,
* we issue this ioctl.
*/
spidev = filp->private_data;
mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
if (spi == NULL) {
mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
}
ctlr = spi->controller;
/* use the buffer lock here for triple duty:
* - prevent I/O (from us) so calling spi_setup() is safe;
* - prevent concurrent SPI_IOC_WR_* from morphing
* data fields while SPI_IOC_RD_* reads them;
* - SPI_IOC_MESSAGE needs the buffer locked "normally".
*/
mutex_lock(&spidev->buf_lock);
switch (cmd) {
/* read requests */
case SPI_IOC_RD_MODE:
case SPI_IOC_RD_MODE32:
tmp = spi->mode & SPI_MODE_MASK;
if (ctlr->use_gpio_descriptors && spi_get_csgpiod(spi, 0))
tmp &= ~SPI_CS_HIGH;
if (cmd == SPI_IOC_RD_MODE)
retval = put_user(tmp, (__u8 __user *)arg);
else
retval = put_user(tmp, (__u32 __user *)arg);
break;
case SPI_IOC_RD_LSB_FIRST:
retval = put_user((spi->mode & SPI_LSB_FIRST) ? 1 : 0,
(__u8 __user *)arg);
break;
case SPI_IOC_RD_BITS_PER_WORD:
retval = put_user(spi->bits_per_word, (__u8 __user *)arg);
break;
case SPI_IOC_RD_MAX_SPEED_HZ:
retval = put_user(spidev->speed_hz, (__u32 __user *)arg);
break;
/* write requests */
case SPI_IOC_WR_MODE:
case SPI_IOC_WR_MODE32:
if (cmd == SPI_IOC_WR_MODE)
retval = get_user(tmp, (u8 __user *)arg);
else
retval = get_user(tmp, (u32 __user *)arg);
if (retval == 0) {
u32 save = spi->mode;
if (tmp & ~SPI_MODE_MASK) {
retval = -EINVAL;
break;
}
if (ctlr->use_gpio_descriptors && spi_get_csgpiod(spi, 0))
tmp |= SPI_CS_HIGH;
tmp |= spi->mode & ~SPI_MODE_MASK;
spi->mode = tmp & SPI_MODE_USER_MASK;
retval = spi_setup(spi);
if (retval < 0)
spi->mode = save;
else
dev_dbg(&spi->dev, "spi mode %x\n", tmp);
}
break;
case SPI_IOC_WR_LSB_FIRST:
retval = get_user(tmp, (__u8 __user *)arg);
if (retval == 0) {
u32 save = spi->mode;
if (tmp)
spi->mode |= SPI_LSB_FIRST;
else
spi->mode &= ~SPI_LSB_FIRST;
retval = spi_setup(spi);
if (retval < 0)
spi->mode = save;
else
dev_dbg(&spi->dev, "%csb first\n",
tmp ? 'l' : 'm');
}
break;
case SPI_IOC_WR_BITS_PER_WORD:
retval = get_user(tmp, (__u8 __user *)arg);
if (retval == 0) {
u8 save = spi->bits_per_word;
spi->bits_per_word = tmp;
retval = spi_setup(spi);
if (retval < 0)
spi->bits_per_word = save;
else
dev_dbg(&spi->dev, "%d bits per word\n", tmp);
}
break;
case SPI_IOC_WR_MAX_SPEED_HZ: {
u32 save;
retval = get_user(tmp, (__u32 __user *)arg);
if (retval)
break;
if (tmp == 0) {
retval = -EINVAL;
break;
}
save = spi->max_speed_hz;
spi->max_speed_hz = tmp;
retval = spi_setup(spi);
if (retval == 0) {
spidev->speed_hz = tmp;
dev_dbg(&spi->dev, "%d Hz (max)\n", spidev->speed_hz);
}
spi->max_speed_hz = save;
break;
}
default:
/* segmented and/or full-duplex I/O request */
/* Check message and copy into scratch area */
ioc = spidev_get_ioc_message(cmd,
(struct spi_ioc_transfer __user *)arg, &n_ioc);
if (IS_ERR(ioc)) {
retval = PTR_ERR(ioc);
break;
}
if (!ioc)
break; /* n_ioc is also 0 */
/* translate to spi_message, execute */
retval = spidev_message(spidev, ioc, n_ioc);
kfree(ioc);
break;
}
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
mutex_unlock(&spidev->spi_lock);
return retval;
}
#ifdef CONFIG_COMPAT
static long
spidev_compat_ioc_message(struct file *filp, unsigned int cmd,
unsigned long arg)
{
struct spi_ioc_transfer __user *u_ioc;
int retval = 0;
struct spidev_data *spidev;
struct spi_device *spi;
unsigned n_ioc, n;
struct spi_ioc_transfer *ioc;
u_ioc = (struct spi_ioc_transfer __user *) compat_ptr(arg);
/* guard against device removal before, or while,
* we issue this ioctl.
*/
spidev = filp->private_data;
mutex_lock(&spidev->spi_lock);
spi = spi_dev_get(spidev->spi);
if (spi == NULL) {
mutex_unlock(&spidev->spi_lock);
return -ESHUTDOWN;
}
/* SPI_IOC_MESSAGE needs the buffer locked "normally" */
mutex_lock(&spidev->buf_lock);
/* Check message and copy into scratch area */
ioc = spidev_get_ioc_message(cmd, u_ioc, &n_ioc);
if (IS_ERR(ioc)) {
retval = PTR_ERR(ioc);
goto done;
}
if (!ioc)
goto done; /* n_ioc is also 0 */
/* Convert buffer pointers */
for (n = 0; n < n_ioc; n++) {
ioc[n].rx_buf = (uintptr_t) compat_ptr(ioc[n].rx_buf);
ioc[n].tx_buf = (uintptr_t) compat_ptr(ioc[n].tx_buf);
}
/* translate to spi_message, execute */
retval = spidev_message(spidev, ioc, n_ioc);
kfree(ioc);
done:
mutex_unlock(&spidev->buf_lock);
spi_dev_put(spi);
mutex_unlock(&spidev->spi_lock);
return retval;
}
static long
spidev_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
if (_IOC_TYPE(cmd) == SPI_IOC_MAGIC
&& _IOC_NR(cmd) == _IOC_NR(SPI_IOC_MESSAGE(0))
&& _IOC_DIR(cmd) == _IOC_WRITE)
return spidev_compat_ioc_message(filp, cmd, arg);
return spidev_ioctl(filp, cmd, (unsigned long)compat_ptr(arg));
}
#else
#define spidev_compat_ioctl NULL
#endif /* CONFIG_COMPAT */
static int spidev_open(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev = NULL, *iter;
int status = -ENXIO;
mutex_lock(&device_list_lock);
list_for_each_entry(iter, &device_list, device_entry) {
if (iter->devt == inode->i_rdev) {
status = 0;
spidev = iter;
break;
}
}
if (!spidev) {
pr_debug("spidev: nothing for minor %d\n", iminor(inode));
goto err_find_dev;
}
if (!spidev->tx_buffer) {
spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->tx_buffer) {
status = -ENOMEM;
goto err_find_dev;
}
}
if (!spidev->rx_buffer) {
spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
if (!spidev->rx_buffer) {
status = -ENOMEM;
goto err_alloc_rx_buf;
}
}
spidev->users++;
filp->private_data = spidev;
stream_open(inode, filp);
mutex_unlock(&device_list_lock);
return 0;
err_alloc_rx_buf:
kfree(spidev->tx_buffer);
spidev->tx_buffer = NULL;
err_find_dev:
mutex_unlock(&device_list_lock);
return status;
}
static int spidev_release(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev;
int dofree;
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
mutex_lock(&spidev->spi_lock);
/* ... after we unbound from the underlying device? */
dofree = (spidev->spi == NULL);
mutex_unlock(&spidev->spi_lock);
/* last close? */
spidev->users--;
if (!spidev->users) {
kfree(spidev->tx_buffer);
spidev->tx_buffer = NULL;
kfree(spidev->rx_buffer);
spidev->rx_buffer = NULL;
if (dofree)
kfree(spidev);
else
spidev->speed_hz = spidev->spi->max_speed_hz;
}
#ifdef CONFIG_SPI_SLAVE
if (!dofree)
spi_slave_abort(spidev->spi);
#endif
mutex_unlock(&device_list_lock);
return 0;
}
static const struct file_operations spidev_fops = {
.owner = THIS_MODULE,
/* REVISIT switch to aio primitives, so that userspace
* gets more complete API coverage. It'll simplify things
* too, except for the locking.
*/
.write = spidev_write,
.read = spidev_read,
.unlocked_ioctl = spidev_ioctl,
.compat_ioctl = spidev_compat_ioctl,
.open = spidev_open,
.release = spidev_release,
.llseek = no_llseek,
};
/*-------------------------------------------------------------------------*/
/* The main reason to have this class is to make mdev/udev create the
* /dev/spidevB.C character device nodes exposing our userspace API.
* It also simplifies memory management.
*/
static const struct class spidev_class = {
.name = "spidev",
};
static const struct spi_device_id spidev_spi_ids[] = {
{ .name = "bh2228fv" },
{ .name = "dh2228fv" },
{ .name = "jg10309-01" },
{ .name = "ltc2488" },
{ .name = "sx1301" },
{ .name = "bk4" },
{ .name = "dhcom-board" },
{ .name = "m53cpld" },
{ .name = "spi-petra" },
{ .name = "spi-authenta" },
{ .name = "em3581" },
{ .name = "si3210" },
{},
};
MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
/*
* spidev should never be referenced in DT without a specific compatible string,
* it is a Linux implementation thing rather than a description of the hardware.
*/
static int spidev_of_check(struct device *dev)
{
if (device_property_match_string(dev, "compatible", "spidev") < 0)
return 0;
dev_err(dev, "spidev listed directly in DT is not supported\n");
return -EINVAL;
}
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "cisco,spi-petra", .data = &spidev_of_check },
{ .compatible = "dh,dhcom-board", .data = &spidev_of_check },
{ .compatible = "elgin,jg10309-01", .data = &spidev_of_check },
{ .compatible = "lineartechnology,ltc2488", .data = &spidev_of_check },
{ .compatible = "lwn,bk4", .data = &spidev_of_check },
{ .compatible = "menlo,m53cpld", .data = &spidev_of_check },
{ .compatible = "micron,spi-authenta", .data = &spidev_of_check },
{ .compatible = "rohm,bh2228fv", .data = &spidev_of_check },
{ .compatible = "rohm,dh2228fv", .data = &spidev_of_check },
{ .compatible = "semtech,sx1301", .data = &spidev_of_check },
{ .compatible = "silabs,em3581", .data = &spidev_of_check },
{ .compatible = "silabs,si3210", .data = &spidev_of_check },
{},
};
MODULE_DEVICE_TABLE(of, spidev_dt_ids);
/* Dummy SPI devices not to be used in production systems */
static int spidev_acpi_check(struct device *dev)
{
dev_warn(dev, "do not use this driver in production systems!\n");
return 0;
}
static const struct acpi_device_id spidev_acpi_ids[] = {
/*
* The ACPI SPT000* devices are only meant for development and
* testing. Systems used in production should have a proper ACPI
* description of the connected peripheral and they should also use
* a proper driver instead of poking directly to the SPI bus.
*/
{ "SPT0001", (kernel_ulong_t)&spidev_acpi_check },
{ "SPT0002", (kernel_ulong_t)&spidev_acpi_check },
{ "SPT0003", (kernel_ulong_t)&spidev_acpi_check },
{},
};
MODULE_DEVICE_TABLE(acpi, spidev_acpi_ids);
/*-------------------------------------------------------------------------*/
static int spidev_probe(struct spi_device *spi)
{
int (*match)(struct device *dev);
struct spidev_data *spidev;
int status;
unsigned long minor;
match = device_get_match_data(&spi->dev);
if (match) {
status = match(&spi->dev);
if (status)
return status;
}
/* Allocate driver data */
spidev = kzalloc(sizeof(*spidev), GFP_KERNEL);
if (!spidev)
return -ENOMEM;
/* Initialize the driver data */
spidev->spi = spi;
mutex_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
/* If we can allocate a minor number, hook up this device.
* Reusing minors is fine so long as udev or mdev is working.
*/
mutex_lock(&device_list_lock);
minor = find_first_zero_bit(minors, N_SPI_MINORS);
if (minor < N_SPI_MINORS) {
struct device *dev;
spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
dev = device_create(&spidev_class, &spi->dev, spidev->devt,
spidev, "spidev%d.%d",
spi->controller->bus_num, spi_get_chipselect(spi, 0));
status = PTR_ERR_OR_ZERO(dev);
} else {
dev_dbg(&spi->dev, "no minor number available!\n");
status = -ENODEV;
}
if (status == 0) {
set_bit(minor, minors);
list_add(&spidev->device_entry, &device_list);
}
mutex_unlock(&device_list_lock);
spidev->speed_hz = spi->max_speed_hz;
if (status == 0)
spi_set_drvdata(spi, spidev);
else
kfree(spidev);
return status;
}
static void spidev_remove(struct spi_device *spi)
{
struct spidev_data *spidev = spi_get_drvdata(spi);
/* prevent new opens */
mutex_lock(&device_list_lock);
/* make sure ops on existing fds can abort cleanly */
mutex_lock(&spidev->spi_lock);
spidev->spi = NULL;
mutex_unlock(&spidev->spi_lock);
list_del(&spidev->device_entry);
device_destroy(&spidev_class, spidev->devt);
clear_bit(MINOR(spidev->devt), minors);
if (spidev->users == 0)
kfree(spidev);
mutex_unlock(&device_list_lock);
}
static struct spi_driver spidev_spi_driver = {
.driver = {
.name = "spidev",
.of_match_table = spidev_dt_ids,
.acpi_match_table = spidev_acpi_ids,
},
.probe = spidev_probe,
.remove = spidev_remove,
.id_table = spidev_spi_ids,
/* NOTE: suspend/resume methods are not necessary here.
* We don't do anything except pass the requests to/from
* the underlying controller. The refrigerator handles
* most issues; the controller driver handles the rest.
*/
};
/*-------------------------------------------------------------------------*/
static int __init spidev_init(void)
{
int status;
/* Claim our 256 reserved device numbers. Then register a class
* that will key udev/mdev to add/remove /dev nodes. Last, register
* the driver which manages those device numbers.
*/
status = register_chrdev(SPIDEV_MAJOR, "spi", &spidev_fops);
if (status < 0)
return status;
status = class_register(&spidev_class);
if (status) {
unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
return status;
}
status = spi_register_driver(&spidev_spi_driver);
if (status < 0) {
class_unregister(&spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
}
return status;
}
module_init(spidev_init);
static void __exit spidev_exit(void)
{
spi_unregister_driver(&spidev_spi_driver);
class_unregister(&spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi_driver.driver.name);
}
module_exit(spidev_exit);
MODULE_AUTHOR("Andrea Paterniani, <a.paterniani@swapp-eng.it>");
MODULE_DESCRIPTION("User mode SPI device interface");
MODULE_LICENSE("GPL");
MODULE_ALIAS("spi:spidev");