Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Hans de Goede | 2912 | 98.05% | 2 | 11.76% |
Fabio Aiuto | 25 | 0.84% | 2 | 11.76% |
Marco Cesati | 16 | 0.54% | 4 | 23.53% |
Lee Jones | 4 | 0.13% | 1 | 5.88% |
Bragatheswaran Manickavel | 3 | 0.10% | 1 | 5.88% |
Payal Kshirsagar | 2 | 0.07% | 1 | 5.88% |
karthik alapati | 2 | 0.07% | 1 | 5.88% |
Nathan Chancellor | 2 | 0.07% | 1 | 5.88% |
Nishka Dasgupta | 2 | 0.07% | 2 | 11.76% |
Quytelda Kahja | 1 | 0.03% | 1 | 5.88% |
Hariprasad Kelam | 1 | 0.03% | 1 | 5.88% |
Total | 2970 | 17 |
// SPDX-License-Identifier: GPL-2.0 /****************************************************************************** * * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. * ******************************************************************************/ #include <drv_types.h> #include <rtw_debug.h> #include <rtl8723b_hal.h> /** * phy_CalculateBitShift - Get shifted position of the BitMask. * @BitMask: Bitmask. * * Return: Return the shift bit position of the mask */ static u32 phy_CalculateBitShift(u32 BitMask) { u32 i; for (i = 0; i <= 31; i++) { if (((BitMask>>i) & 0x1) == 1) break; } return i; } /** * PHY_QueryBBReg_8723B - Read "specific bits" from BB register. * @Adapter: * @RegAddr: The target address to be readback * @BitMask: The target bit position in the target address * to be readback * * Return: The readback register value * * .. Note:: This function is equal to "GetRegSetting" in PHY programming * guide */ u32 PHY_QueryBBReg_8723B(struct adapter *Adapter, u32 RegAddr, u32 BitMask) { u32 OriginalValue, BitShift; OriginalValue = rtw_read32(Adapter, RegAddr); BitShift = phy_CalculateBitShift(BitMask); return (OriginalValue & BitMask) >> BitShift; } /** * PHY_SetBBReg_8723B - Write "Specific bits" to BB register (page 8~). * @Adapter: * @RegAddr: The target address to be modified * @BitMask: The target bit position in the target address * to be modified * @Data: The new register value in the target bit position * of the target address * * .. Note:: This function is equal to "PutRegSetting" in PHY programming * guide */ void PHY_SetBBReg_8723B( struct adapter *Adapter, u32 RegAddr, u32 BitMask, u32 Data ) { /* u16 BBWaitCounter = 0; */ u32 OriginalValue, BitShift; if (BitMask != bMaskDWord) { /* if not "double word" write */ OriginalValue = rtw_read32(Adapter, RegAddr); BitShift = phy_CalculateBitShift(BitMask); Data = ((OriginalValue & (~BitMask)) | ((Data << BitShift) & BitMask)); } rtw_write32(Adapter, RegAddr, Data); } /* */ /* 2. RF register R/W API */ /* */ static u32 phy_RFSerialRead_8723B( struct adapter *Adapter, enum rf_path eRFPath, u32 Offset ) { u32 retValue = 0; struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); struct bb_register_def *pPhyReg = &pHalData->PHYRegDef[eRFPath]; u32 NewOffset; u32 tmplong2; u8 RfPiEnable = 0; u32 MaskforPhySet = 0; int i = 0; /* */ /* Make sure RF register offset is correct */ /* */ Offset &= 0xff; NewOffset = Offset; if (eRFPath == RF_PATH_A) { tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord); tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; /* T65 RF */ PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord, tmplong2&(~bLSSIReadEdge)); } else { tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter2|MaskforPhySet, bMaskDWord); tmplong2 = (tmplong2 & (~bLSSIReadAddress)) | (NewOffset<<23) | bLSSIReadEdge; /* T65 RF */ PHY_SetBBReg(Adapter, rFPGA0_XB_HSSIParameter2|MaskforPhySet, bMaskDWord, tmplong2&(~bLSSIReadEdge)); } tmplong2 = PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord); PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord, tmplong2 & (~bLSSIReadEdge)); PHY_SetBBReg(Adapter, rFPGA0_XA_HSSIParameter2|MaskforPhySet, bMaskDWord, tmplong2 | bLSSIReadEdge); udelay(10); for (i = 0; i < 2; i++) udelay(MAX_STALL_TIME); udelay(10); if (eRFPath == RF_PATH_A) RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XA_HSSIParameter1|MaskforPhySet, BIT8); else if (eRFPath == RF_PATH_B) RfPiEnable = (u8)PHY_QueryBBReg(Adapter, rFPGA0_XB_HSSIParameter1|MaskforPhySet, BIT8); if (RfPiEnable) { /* Read from BBreg8b8, 12 bits for 8190, 20bits for T65 RF */ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBackPi|MaskforPhySet, bLSSIReadBackData); } else { /* Read from BBreg8a0, 12 bits for 8190, 20 bits for T65 RF */ retValue = PHY_QueryBBReg(Adapter, pPhyReg->rfLSSIReadBack|MaskforPhySet, bLSSIReadBackData); } return retValue; } /** * phy_RFSerialWrite_8723B - Write data to RF register (page 8~). * @Adapter: * @eRFPath: Radio path of A/B/C/D * @Offset: The target address to be read * @Data: The new register Data in the target bit position * of the target to be read * * .. Note:: There are three types of serial operations: * 1. Software serial write * 2. Hardware LSSI-Low Speed Serial Interface * 3. Hardware HSSI-High speed * serial write. Driver need to implement (1) and (2). * This function is equal to the combination of RF_ReadReg() and RFLSSIRead() * * .. Note:: For RF8256 only * The total count of RTL8256(Zebra4) register is around 36 bit it only employs * 4-bit RF address. RTL8256 uses "register mode control bit" (Reg00[12], Reg00[10]) * to access register address bigger than 0xf. See "Appendix-4 in PHY Configuration * programming guide" for more details. * Thus, we define a sub-finction for RTL8526 register address conversion * =========================================================== * Register Mode RegCTL[1] RegCTL[0] Note * (Reg00[12]) (Reg00[10]) * =========================================================== * Reg_Mode0 0 x Reg 0 ~15(0x0 ~ 0xf) * ------------------------------------------------------------------ * Reg_Mode1 1 0 Reg 16 ~30(0x1 ~ 0xf) * ------------------------------------------------------------------ * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) * ------------------------------------------------------------------ * *2008/09/02 MH Add 92S RF definition * * * */ static void phy_RFSerialWrite_8723B( struct adapter *Adapter, enum rf_path eRFPath, u32 Offset, u32 Data ) { u32 DataAndAddr = 0; struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); struct bb_register_def *pPhyReg = &pHalData->PHYRegDef[eRFPath]; u32 NewOffset; Offset &= 0xff; /* */ /* Switch page for 8256 RF IC */ /* */ NewOffset = Offset; /* */ /* Put write addr in [5:0] and write data in [31:16] */ /* */ DataAndAddr = ((NewOffset<<20) | (Data&0x000fffff)) & 0x0fffffff; /* T65 RF */ /* */ /* Write Operation */ /* */ PHY_SetBBReg(Adapter, pPhyReg->rf3wireOffset, bMaskDWord, DataAndAddr); } /** * PHY_QueryRFReg_8723B - Query "Specific bits" to RF register (page 8~). * @Adapter: * @eRFPath: Radio path of A/B/C/D * @RegAddr: The target address to be read * @BitMask: The target bit position in the target address * to be read * * Return: Readback value * * .. Note:: This function is equal to "GetRFRegSetting" in PHY * programming guide */ u32 PHY_QueryRFReg_8723B( struct adapter *Adapter, u8 eRFPath, u32 RegAddr, u32 BitMask ) { u32 Original_Value, BitShift; Original_Value = phy_RFSerialRead_8723B(Adapter, eRFPath, RegAddr); BitShift = phy_CalculateBitShift(BitMask); return (Original_Value & BitMask) >> BitShift; } /** * PHY_SetRFReg_8723B - Write "Specific bits" to RF register (page 8~). * @Adapter: * @eRFPath: Radio path of A/B/C/D * @RegAddr: The target address to be modified * @BitMask: The target bit position in the target address * to be modified * @Data: The new register Data in the target bit position * of the target address * * .. Note:: This function is equal to "PutRFRegSetting" in PHY * programming guide. */ void PHY_SetRFReg_8723B( struct adapter *Adapter, u8 eRFPath, u32 RegAddr, u32 BitMask, u32 Data ) { u32 Original_Value, BitShift; /* RF data is 12 bits only */ if (BitMask != bRFRegOffsetMask) { Original_Value = phy_RFSerialRead_8723B(Adapter, eRFPath, RegAddr); BitShift = phy_CalculateBitShift(BitMask); Data = ((Original_Value & (~BitMask)) | (Data<<BitShift)); } phy_RFSerialWrite_8723B(Adapter, eRFPath, RegAddr, Data); } /* */ /* 3. Initial MAC/BB/RF config by reading MAC/BB/RF txt. */ /* */ /*----------------------------------------------------------------------------- * PHY_MACConfig8192C - Config MAC by header file or parameter file. * * Revised History: * When Who Remark * 08/12/2008 MHC Create Version 0. * *--------------------------------------------------------------------------- */ s32 PHY_MACConfig8723B(struct adapter *Adapter) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); ODM_ReadAndConfig_MP_8723B_MAC_REG(&pHalData->odmpriv); return _SUCCESS; } /** * phy_InitBBRFRegisterDefinition - Initialize Register definition offset for * Radio Path A/B/C/D * @Adapter: * * .. Note:: The initialization value is constant and it should never be changes */ static void phy_InitBBRFRegisterDefinition(struct adapter *Adapter) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); /* RF Interface Sowrtware Control */ pHalData->PHYRegDef[RF_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 LSBs if read 32-bit from 0x870 */ pHalData->PHYRegDef[RF_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; /* 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) */ /* RF Interface Output (and Enable) */ pHalData->PHYRegDef[RF_PATH_A].rfintfo = rFPGA0_XA_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x860 */ pHalData->PHYRegDef[RF_PATH_B].rfintfo = rFPGA0_XB_RFInterfaceOE; /* 16 LSBs if read 32-bit from 0x864 */ /* RF Interface (Output and) Enable */ pHalData->PHYRegDef[RF_PATH_A].rfintfe = rFPGA0_XA_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x860 (16-bit for 0x862) */ pHalData->PHYRegDef[RF_PATH_B].rfintfe = rFPGA0_XB_RFInterfaceOE; /* 16 MSBs if read 32-bit from 0x864 (16-bit for 0x866) */ pHalData->PHYRegDef[RF_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; /* LSSI Parameter */ pHalData->PHYRegDef[RF_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; pHalData->PHYRegDef[RF_PATH_A].rfHSSIPara2 = rFPGA0_XA_HSSIParameter2; /* wire control parameter2 */ pHalData->PHYRegDef[RF_PATH_B].rfHSSIPara2 = rFPGA0_XB_HSSIParameter2; /* wire control parameter2 */ /* Transceiver Readback LSSI/HSPI mode */ pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBack = rFPGA0_XA_LSSIReadBack; pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBack = rFPGA0_XB_LSSIReadBack; pHalData->PHYRegDef[RF_PATH_A].rfLSSIReadBackPi = TransceiverA_HSPI_Readback; pHalData->PHYRegDef[RF_PATH_B].rfLSSIReadBackPi = TransceiverB_HSPI_Readback; } static int phy_BB8723b_Config_ParaFile(struct adapter *Adapter) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); /* Read Tx Power Limit File */ PHY_InitTxPowerLimit(Adapter); if ( Adapter->registrypriv.RegEnableTxPowerLimit == 1 || (Adapter->registrypriv.RegEnableTxPowerLimit == 2 && pHalData->EEPROMRegulatory == 1) ) { ODM_ConfigRFWithHeaderFile(&pHalData->odmpriv, CONFIG_RF_TXPWR_LMT, 0); } /* */ /* 1. Read PHY_REG.TXT BB INIT!! */ /* */ ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG); /* If EEPROM or EFUSE autoload OK, We must config by PHY_REG_PG.txt */ PHY_InitTxPowerByRate(Adapter); if ( Adapter->registrypriv.RegEnableTxPowerByRate == 1 || (Adapter->registrypriv.RegEnableTxPowerByRate == 2 && pHalData->EEPROMRegulatory != 2) ) { ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_PHY_REG_PG); if (pHalData->odmpriv.PhyRegPgValueType == PHY_REG_PG_EXACT_VALUE) PHY_TxPowerByRateConfiguration(Adapter); if ( Adapter->registrypriv.RegEnableTxPowerLimit == 1 || (Adapter->registrypriv.RegEnableTxPowerLimit == 2 && pHalData->EEPROMRegulatory == 1) ) PHY_ConvertTxPowerLimitToPowerIndex(Adapter); } /* */ /* 2. Read BB AGC table Initialization */ /* */ ODM_ConfigBBWithHeaderFile(&pHalData->odmpriv, CONFIG_BB_AGC_TAB); return _SUCCESS; } int PHY_BBConfig8723B(struct adapter *Adapter) { int rtStatus = _SUCCESS; struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); u32 RegVal; u8 CrystalCap; phy_InitBBRFRegisterDefinition(Adapter); /* Enable BB and RF */ RegVal = rtw_read16(Adapter, REG_SYS_FUNC_EN); rtw_write16(Adapter, REG_SYS_FUNC_EN, (u16)(RegVal|BIT13|BIT0|BIT1)); rtw_write32(Adapter, 0x948, 0x280); /* Others use Antenna S1 */ rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB); msleep(1); PHY_SetRFReg(Adapter, RF_PATH_A, 0x1, 0xfffff, 0x780); rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_PPLL|FEN_PCIEA|FEN_DIO_PCIE|FEN_BB_GLB_RSTn|FEN_BBRSTB); rtw_write8(Adapter, REG_AFE_XTAL_CTRL+1, 0x80); /* */ /* Config BB and AGC */ /* */ rtStatus = phy_BB8723b_Config_ParaFile(Adapter); /* 0x2C[23:18] = 0x2C[17:12] = CrystalCap */ CrystalCap = pHalData->CrystalCap & 0x3F; PHY_SetBBReg(Adapter, REG_MAC_PHY_CTRL, 0xFFF000, (CrystalCap | (CrystalCap << 6))); return rtStatus; } static void phy_LCK_8723B(struct adapter *Adapter) { PHY_SetRFReg(Adapter, RF_PATH_A, 0xB0, bRFRegOffsetMask, 0xDFBE0); PHY_SetRFReg(Adapter, RF_PATH_A, RF_CHNLBW, bRFRegOffsetMask, 0x8C01); mdelay(200); PHY_SetRFReg(Adapter, RF_PATH_A, 0xB0, bRFRegOffsetMask, 0xDFFE0); } int PHY_RFConfig8723B(struct adapter *Adapter) { int rtStatus = _SUCCESS; /* */ /* RF config */ /* */ rtStatus = PHY_RF6052_Config8723B(Adapter); phy_LCK_8723B(Adapter); return rtStatus; } /************************************************************************************************************** * Description: * The low-level interface to set TxAGC , called by both MP and Normal Driver. * * <20120830, Kordan> **************************************************************************************************************/ void PHY_SetTxPowerIndex( struct adapter *Adapter, u32 PowerIndex, u8 RFPath, u8 Rate ) { if (RFPath == RF_PATH_A || RFPath == RF_PATH_B) { switch (Rate) { case MGN_1M: PHY_SetBBReg(Adapter, rTxAGC_A_CCK1_Mcs32, bMaskByte1, PowerIndex); break; case MGN_2M: PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte1, PowerIndex); break; case MGN_5_5M: PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte2, PowerIndex); break; case MGN_11M: PHY_SetBBReg(Adapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte3, PowerIndex); break; case MGN_6M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate18_06, bMaskByte0, PowerIndex); break; case MGN_9M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate18_06, bMaskByte1, PowerIndex); break; case MGN_12M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate18_06, bMaskByte2, PowerIndex); break; case MGN_18M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate18_06, bMaskByte3, PowerIndex); break; case MGN_24M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate54_24, bMaskByte0, PowerIndex); break; case MGN_36M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate54_24, bMaskByte1, PowerIndex); break; case MGN_48M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate54_24, bMaskByte2, PowerIndex); break; case MGN_54M: PHY_SetBBReg(Adapter, rTxAGC_A_Rate54_24, bMaskByte3, PowerIndex); break; case MGN_MCS0: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs03_Mcs00, bMaskByte0, PowerIndex); break; case MGN_MCS1: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs03_Mcs00, bMaskByte1, PowerIndex); break; case MGN_MCS2: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs03_Mcs00, bMaskByte2, PowerIndex); break; case MGN_MCS3: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs03_Mcs00, bMaskByte3, PowerIndex); break; case MGN_MCS4: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs07_Mcs04, bMaskByte0, PowerIndex); break; case MGN_MCS5: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs07_Mcs04, bMaskByte1, PowerIndex); break; case MGN_MCS6: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs07_Mcs04, bMaskByte2, PowerIndex); break; case MGN_MCS7: PHY_SetBBReg(Adapter, rTxAGC_A_Mcs07_Mcs04, bMaskByte3, PowerIndex); break; default: break; } } } u8 PHY_GetTxPowerIndex( struct adapter *padapter, u8 RFPath, u8 Rate, enum channel_width BandWidth, u8 Channel ) { struct hal_com_data *pHalData = GET_HAL_DATA(padapter); s8 txPower = 0, powerDiffByRate = 0, limit = 0; txPower = (s8) PHY_GetTxPowerIndexBase(padapter, RFPath, Rate, BandWidth, Channel); powerDiffByRate = PHY_GetTxPowerByRate(padapter, RF_PATH_A, Rate); limit = phy_get_tx_pwr_lmt( padapter, padapter->registrypriv.RegPwrTblSel, pHalData->CurrentChannelBW, RFPath, Rate, pHalData->CurrentChannel ); powerDiffByRate = powerDiffByRate > limit ? limit : powerDiffByRate; txPower += powerDiffByRate; txPower += PHY_GetTxPowerTrackingOffset(padapter, RFPath, Rate); if (txPower > MAX_POWER_INDEX) txPower = MAX_POWER_INDEX; return (u8) txPower; } void PHY_SetTxPowerLevel8723B(struct adapter *Adapter, u8 Channel) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); struct dm_odm_t *pDM_Odm = &pHalData->odmpriv; struct fat_t *pDM_FatTable = &pDM_Odm->DM_FatTable; u8 RFPath = RF_PATH_A; if (pHalData->AntDivCfg) {/* antenna diversity Enable */ RFPath = ((pDM_FatTable->RxIdleAnt == MAIN_ANT) ? RF_PATH_A : RF_PATH_B); } else { /* antenna diversity disable */ RFPath = pHalData->ant_path; } PHY_SetTxPowerLevelByPath(Adapter, Channel, RFPath); } void PHY_GetTxPowerLevel8723B(struct adapter *Adapter, s32 *powerlevel) { } static void phy_SetRegBW_8723B( struct adapter *Adapter, enum channel_width CurrentBW ) { u16 RegRfMod_BW, u2tmp = 0; RegRfMod_BW = rtw_read16(Adapter, REG_TRXPTCL_CTL_8723B); switch (CurrentBW) { case CHANNEL_WIDTH_20: rtw_write16(Adapter, REG_TRXPTCL_CTL_8723B, (RegRfMod_BW & 0xFE7F)); /* BIT 7 = 0, BIT 8 = 0 */ break; case CHANNEL_WIDTH_40: u2tmp = RegRfMod_BW | BIT7; rtw_write16(Adapter, REG_TRXPTCL_CTL_8723B, (u2tmp & 0xFEFF)); /* BIT 7 = 1, BIT 8 = 0 */ break; default: break; } } static u8 phy_GetSecondaryChnl_8723B(struct adapter *Adapter) { u8 SCSettingOf40 = 0, SCSettingOf20 = 0; struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); if (pHalData->CurrentChannelBW == CHANNEL_WIDTH_40) { if (pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_UPPER) SCSettingOf20 = HT_DATA_SC_20_UPPER_OF_40MHZ; else if (pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) SCSettingOf20 = HT_DATA_SC_20_LOWER_OF_40MHZ; } return (SCSettingOf40 << 4) | SCSettingOf20; } static void phy_PostSetBwMode8723B(struct adapter *Adapter) { u8 SubChnlNum = 0; struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); /* 3 Set Reg668 Reg440 BW */ phy_SetRegBW_8723B(Adapter, pHalData->CurrentChannelBW); /* 3 Set Reg483 */ SubChnlNum = phy_GetSecondaryChnl_8723B(Adapter); rtw_write8(Adapter, REG_DATA_SC_8723B, SubChnlNum); /* 3 */ /* 3<2>Set PHY related register */ /* 3 */ switch (pHalData->CurrentChannelBW) { /* 20 MHz channel*/ case CHANNEL_WIDTH_20: PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x0); PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x0); PHY_SetBBReg(Adapter, rOFDM0_TxPseudoNoiseWgt, (BIT31|BIT30), 0x0); break; /* 40 MHz channel*/ case CHANNEL_WIDTH_40: PHY_SetBBReg(Adapter, rFPGA0_RFMOD, bRFMOD, 0x1); PHY_SetBBReg(Adapter, rFPGA1_RFMOD, bRFMOD, 0x1); /* Set Control channel to upper or lower. These settings are required only for 40MHz */ PHY_SetBBReg(Adapter, rCCK0_System, bCCKSideBand, (pHalData->nCur40MhzPrimeSC>>1)); PHY_SetBBReg(Adapter, rOFDM1_LSTF, 0xC00, pHalData->nCur40MhzPrimeSC); PHY_SetBBReg(Adapter, 0x818, (BIT26|BIT27), (pHalData->nCur40MhzPrimeSC == HAL_PRIME_CHNL_OFFSET_LOWER) ? 2 : 1); break; default: break; } /* 3<3>Set RF related register */ PHY_RF6052SetBandwidth8723B(Adapter, pHalData->CurrentChannelBW); } static void phy_SwChnl8723B(struct adapter *padapter) { struct hal_com_data *pHalData = GET_HAL_DATA(padapter); u8 channelToSW = pHalData->CurrentChannel; if (pHalData->rf_chip == RF_PSEUDO_11N) return; pHalData->RfRegChnlVal[0] = ((pHalData->RfRegChnlVal[0] & 0xfffff00) | channelToSW); PHY_SetRFReg(padapter, RF_PATH_A, RF_CHNLBW, 0x3FF, pHalData->RfRegChnlVal[0]); PHY_SetRFReg(padapter, RF_PATH_B, RF_CHNLBW, 0x3FF, pHalData->RfRegChnlVal[0]); } static void phy_SwChnlAndSetBwMode8723B(struct adapter *Adapter) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); if (Adapter->bDriverStopped || Adapter->bSurpriseRemoved) return; if (pHalData->bSwChnl) { phy_SwChnl8723B(Adapter); pHalData->bSwChnl = false; } if (pHalData->bSetChnlBW) { phy_PostSetBwMode8723B(Adapter); pHalData->bSetChnlBW = false; } PHY_SetTxPowerLevel8723B(Adapter, pHalData->CurrentChannel); } static void PHY_HandleSwChnlAndSetBW8723B( struct adapter *Adapter, bool bSwitchChannel, bool bSetBandWidth, u8 ChannelNum, enum channel_width ChnlWidth, enum extchnl_offset ExtChnlOffsetOf40MHz, enum extchnl_offset ExtChnlOffsetOf80MHz, u8 CenterFrequencyIndex1 ) { /* static bool bInitialzed = false; */ struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); u8 tmpChannel = pHalData->CurrentChannel; enum channel_width tmpBW = pHalData->CurrentChannelBW; u8 tmpnCur40MhzPrimeSC = pHalData->nCur40MhzPrimeSC; u8 tmpnCur80MhzPrimeSC = pHalData->nCur80MhzPrimeSC; u8 tmpCenterFrequencyIndex1 = pHalData->CurrentCenterFrequencyIndex1; /* check is swchnl or setbw */ if (!bSwitchChannel && !bSetBandWidth) return; /* skip change for channel or bandwidth is the same */ if (bSwitchChannel) { { if (HAL_IsLegalChannel(Adapter, ChannelNum)) pHalData->bSwChnl = true; } } if (bSetBandWidth) pHalData->bSetChnlBW = true; if (!pHalData->bSetChnlBW && !pHalData->bSwChnl) return; if (pHalData->bSwChnl) { pHalData->CurrentChannel = ChannelNum; pHalData->CurrentCenterFrequencyIndex1 = ChannelNum; } if (pHalData->bSetChnlBW) { pHalData->CurrentChannelBW = ChnlWidth; pHalData->nCur40MhzPrimeSC = ExtChnlOffsetOf40MHz; pHalData->nCur80MhzPrimeSC = ExtChnlOffsetOf80MHz; pHalData->CurrentCenterFrequencyIndex1 = CenterFrequencyIndex1; } /* Switch workitem or set timer to do switch channel or setbandwidth operation */ if ((!Adapter->bDriverStopped) && (!Adapter->bSurpriseRemoved)) { phy_SwChnlAndSetBwMode8723B(Adapter); } else { if (pHalData->bSwChnl) { pHalData->CurrentChannel = tmpChannel; pHalData->CurrentCenterFrequencyIndex1 = tmpChannel; } if (pHalData->bSetChnlBW) { pHalData->CurrentChannelBW = tmpBW; pHalData->nCur40MhzPrimeSC = tmpnCur40MhzPrimeSC; pHalData->nCur80MhzPrimeSC = tmpnCur80MhzPrimeSC; pHalData->CurrentCenterFrequencyIndex1 = tmpCenterFrequencyIndex1; } } } void PHY_SetBWMode8723B( struct adapter *Adapter, enum channel_width Bandwidth, /* 20M or 40M */ unsigned char Offset /* Upper, Lower, or Don't care */ ) { struct hal_com_data *pHalData = GET_HAL_DATA(Adapter); PHY_HandleSwChnlAndSetBW8723B(Adapter, false, true, pHalData->CurrentChannel, Bandwidth, Offset, Offset, pHalData->CurrentChannel); } /* Call after initialization */ void PHY_SwChnl8723B(struct adapter *Adapter, u8 channel) { PHY_HandleSwChnlAndSetBW8723B(Adapter, true, false, channel, 0, 0, 0, channel); } void PHY_SetSwChnlBWMode8723B( struct adapter *Adapter, u8 channel, enum channel_width Bandwidth, u8 Offset40, u8 Offset80 ) { PHY_HandleSwChnlAndSetBW8723B(Adapter, true, true, channel, Bandwidth, Offset40, Offset80, channel); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1