Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Niklas Söderlund | 1305 | 47.42% | 19 | 39.58% |
Wolfram Sang | 1224 | 44.48% | 7 | 14.58% |
Yoshihiro Kaneko | 74 | 2.69% | 3 | 6.25% |
Marek Vašut | 48 | 1.74% | 1 | 2.08% |
Geert Uytterhoeven | 36 | 1.31% | 3 | 6.25% |
Daniel Lezcano | 17 | 0.62% | 3 | 6.25% |
Marian-Cristian Rotariu | 12 | 0.44% | 1 | 2.08% |
Biju Das | 12 | 0.44% | 1 | 2.08% |
Fabrizio Castro | 6 | 0.22% | 1 | 2.08% |
Sergei Shtylyov | 6 | 0.22% | 1 | 2.08% |
Hien Dang | 2 | 0.07% | 1 | 2.08% |
Uwe Kleine-König | 2 | 0.07% | 1 | 2.08% |
Jiada Wang | 2 | 0.07% | 1 | 2.08% |
Kuninori Morimoto | 2 | 0.07% | 1 | 2.08% |
Rob Herring | 1 | 0.04% | 1 | 2.08% |
Hoan Nguyen An | 1 | 0.04% | 1 | 2.08% |
Fuqian Huang | 1 | 0.04% | 1 | 2.08% |
Dien Pham | 1 | 0.04% | 1 | 2.08% |
Total | 2752 | 48 |
// SPDX-License-Identifier: GPL-2.0 /* * R-Car Gen3 THS thermal sensor driver * Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen. * * Copyright (C) 2016 Renesas Electronics Corporation. * Copyright (C) 2016 Sang Engineering */ #include <linux/delay.h> #include <linux/err.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/thermal.h> #include "../thermal_hwmon.h" /* Register offsets */ #define REG_GEN3_IRQSTR 0x04 #define REG_GEN3_IRQMSK 0x08 #define REG_GEN3_IRQCTL 0x0C #define REG_GEN3_IRQEN 0x10 #define REG_GEN3_IRQTEMP1 0x14 #define REG_GEN3_IRQTEMP2 0x18 #define REG_GEN3_IRQTEMP3 0x1C #define REG_GEN3_THCTR 0x20 #define REG_GEN3_TEMP 0x28 #define REG_GEN3_THCODE1 0x50 #define REG_GEN3_THCODE2 0x54 #define REG_GEN3_THCODE3 0x58 #define REG_GEN3_PTAT1 0x5c #define REG_GEN3_PTAT2 0x60 #define REG_GEN3_PTAT3 0x64 #define REG_GEN3_THSCP 0x68 #define REG_GEN4_THSFMON00 0x180 #define REG_GEN4_THSFMON01 0x184 #define REG_GEN4_THSFMON02 0x188 #define REG_GEN4_THSFMON15 0x1BC #define REG_GEN4_THSFMON16 0x1C0 #define REG_GEN4_THSFMON17 0x1C4 /* IRQ{STR,MSK,EN} bits */ #define IRQ_TEMP1 BIT(0) #define IRQ_TEMP2 BIT(1) #define IRQ_TEMP3 BIT(2) #define IRQ_TEMPD1 BIT(3) #define IRQ_TEMPD2 BIT(4) #define IRQ_TEMPD3 BIT(5) /* THCTR bits */ #define THCTR_PONM BIT(6) #define THCTR_THSST BIT(0) /* THSCP bits */ #define THSCP_COR_PARA_VLD (BIT(15) | BIT(14)) #define CTEMP_MASK 0xFFF #define MCELSIUS(temp) ((temp) * 1000) #define GEN3_FUSE_MASK 0xFFF #define GEN4_FUSE_MASK 0xFFF #define TSC_MAX_NUM 5 struct rcar_gen3_thermal_priv; struct rcar_thermal_info { int scale; int adj_below; int adj_above; void (*read_fuses)(struct rcar_gen3_thermal_priv *priv); }; struct equation_set_coef { int a; int b; }; struct rcar_gen3_thermal_tsc { struct rcar_gen3_thermal_priv *priv; void __iomem *base; struct thermal_zone_device *zone; /* Different coefficients are used depending on a threshold. */ struct { struct equation_set_coef below; struct equation_set_coef above; } coef; int thcode[3]; }; struct rcar_gen3_thermal_priv { struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM]; struct thermal_zone_device_ops ops; unsigned int num_tscs; int ptat[3]; int tj_t; const struct rcar_thermal_info *info; }; static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc, u32 reg) { return ioread32(tsc->base + reg); } static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc, u32 reg, u32 data) { iowrite32(data, tsc->base + reg); } /* * Linear approximation for temperature * * [temp] = ((thadj - [reg]) * a) / b + adj * [reg] = thadj - ([temp] - adj) * b / a * * The constants a and b are calculated using two triplets of int values PTAT * and THCODE. PTAT and THCODE can either be read from hardware or use hard * coded values from the driver. The formula to calculate a and b are taken from * the datasheet. Different calculations are needed for a and b depending on * if the input variables ([temp] or [reg]) are above or below a threshold. The * threshold is also calculated from PTAT and THCODE using formulas from the * datasheet. * * The constant thadj is one of the THCODE values, which one to use depends on * the threshold and input value. * * The constants adj is taken verbatim from the datasheet. Two values exists, * which one to use depends on the input value and the calculated threshold. * Furthermore different SoC models supported by the driver have different sets * of values. The values for each model are stored in the device match data. */ static void rcar_gen3_thermal_shared_coefs(struct rcar_gen3_thermal_priv *priv) { priv->tj_t = DIV_ROUND_CLOSEST((priv->ptat[1] - priv->ptat[2]) * priv->info->scale, priv->ptat[0] - priv->ptat[2]) + priv->info->adj_below; } static void rcar_gen3_thermal_tsc_coefs(struct rcar_gen3_thermal_priv *priv, struct rcar_gen3_thermal_tsc *tsc) { tsc->coef.below.a = priv->info->scale * (priv->ptat[2] - priv->ptat[1]); tsc->coef.above.a = priv->info->scale * (priv->ptat[0] - priv->ptat[1]); tsc->coef.below.b = (priv->ptat[2] - priv->ptat[0]) * (tsc->thcode[2] - tsc->thcode[1]); tsc->coef.above.b = (priv->ptat[0] - priv->ptat[2]) * (tsc->thcode[1] - tsc->thcode[0]); } static int rcar_gen3_thermal_get_temp(struct thermal_zone_device *tz, int *temp) { struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz); struct rcar_gen3_thermal_priv *priv = tsc->priv; const struct equation_set_coef *coef; int adj, decicelsius, reg, thcode; /* Read register and convert to mili Celsius */ reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK; if (reg < tsc->thcode[1]) { adj = priv->info->adj_below; coef = &tsc->coef.below; thcode = tsc->thcode[2]; } else { adj = priv->info->adj_above; coef = &tsc->coef.above; thcode = tsc->thcode[0]; } /* * The dividend can't be grown as it might overflow, instead shorten the * divisor to convert to decidegree Celsius. If we convert after the * division precision is lost as we will scale up from whole degrees * Celsius. */ decicelsius = DIV_ROUND_CLOSEST(coef->a * (thcode - reg), coef->b / 10); /* Guaranteed operating range is -40C to 125C. */ /* Reporting is done in millidegree Celsius */ *temp = decicelsius * 100 + adj * 1000; return 0; } static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc, int mcelsius) { struct rcar_gen3_thermal_priv *priv = tsc->priv; const struct equation_set_coef *coef; int adj, celsius, thcode; celsius = DIV_ROUND_CLOSEST(mcelsius, 1000); if (celsius < priv->tj_t) { coef = &tsc->coef.below; adj = priv->info->adj_below; thcode = tsc->thcode[2]; } else { coef = &tsc->coef.above; adj = priv->info->adj_above; thcode = tsc->thcode[0]; } return thcode - DIV_ROUND_CLOSEST((celsius - adj) * coef->b, coef->a); } static int rcar_gen3_thermal_set_trips(struct thermal_zone_device *tz, int low, int high) { struct rcar_gen3_thermal_tsc *tsc = thermal_zone_device_priv(tz); u32 irqmsk = 0; if (low != -INT_MAX) { irqmsk |= IRQ_TEMPD1; rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1, rcar_gen3_thermal_mcelsius_to_temp(tsc, low)); } if (high != INT_MAX) { irqmsk |= IRQ_TEMP2; rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2, rcar_gen3_thermal_mcelsius_to_temp(tsc, high)); } rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk); return 0; } static const struct thermal_zone_device_ops rcar_gen3_tz_of_ops = { .get_temp = rcar_gen3_thermal_get_temp, .set_trips = rcar_gen3_thermal_set_trips, }; static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data) { struct rcar_gen3_thermal_priv *priv = data; unsigned int i; u32 status; for (i = 0; i < priv->num_tscs; i++) { status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR); rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0); if (status && priv->tscs[i]->zone) thermal_zone_device_update(priv->tscs[i]->zone, THERMAL_EVENT_UNSPECIFIED); } return IRQ_HANDLED; } static void rcar_gen3_thermal_read_fuses_gen3(struct rcar_gen3_thermal_priv *priv) { unsigned int i; /* * Set the pseudo calibration points with fused values. * PTAT is shared between all TSCs but only fused for the first * TSC while THCODEs are fused for each TSC. */ priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT1) & GEN3_FUSE_MASK; priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT2) & GEN3_FUSE_MASK; priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_PTAT3) & GEN3_FUSE_MASK; for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE1) & GEN3_FUSE_MASK; tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE2) & GEN3_FUSE_MASK; tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN3_THCODE3) & GEN3_FUSE_MASK; } } static void rcar_gen3_thermal_read_fuses_gen4(struct rcar_gen3_thermal_priv *priv) { unsigned int i; /* * Set the pseudo calibration points with fused values. * PTAT is shared between all TSCs but only fused for the first * TSC while THCODEs are fused for each TSC. */ priv->ptat[0] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON16) & GEN4_FUSE_MASK; priv->ptat[1] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON17) & GEN4_FUSE_MASK; priv->ptat[2] = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN4_THSFMON15) & GEN4_FUSE_MASK; for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; tsc->thcode[0] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON01) & GEN4_FUSE_MASK; tsc->thcode[1] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON02) & GEN4_FUSE_MASK; tsc->thcode[2] = rcar_gen3_thermal_read(tsc, REG_GEN4_THSFMON00) & GEN4_FUSE_MASK; } } static bool rcar_gen3_thermal_read_fuses(struct rcar_gen3_thermal_priv *priv) { unsigned int i; u32 thscp; /* If fuses are not set, fallback to pseudo values. */ thscp = rcar_gen3_thermal_read(priv->tscs[0], REG_GEN3_THSCP); if (!priv->info->read_fuses || (thscp & THSCP_COR_PARA_VLD) != THSCP_COR_PARA_VLD) { /* Default THCODE values in case FUSEs are not set. */ static const int thcodes[TSC_MAX_NUM][3] = { { 3397, 2800, 2221 }, { 3393, 2795, 2216 }, { 3389, 2805, 2237 }, { 3415, 2694, 2195 }, { 3356, 2724, 2244 }, }; priv->ptat[0] = 2631; priv->ptat[1] = 1509; priv->ptat[2] = 435; for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; tsc->thcode[0] = thcodes[i][0]; tsc->thcode[1] = thcodes[i][1]; tsc->thcode[2] = thcodes[i][2]; } return false; } priv->info->read_fuses(priv); return true; } static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_priv *priv, struct rcar_gen3_thermal_tsc *tsc) { u32 reg_val; reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); reg_val &= ~THCTR_PONM; rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); usleep_range(1000, 2000); rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0); rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0); if (priv->ops.set_trips) rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2); reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR); reg_val |= THCTR_THSST; rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val); usleep_range(1000, 2000); } static const struct rcar_thermal_info rcar_m3w_thermal_info = { .scale = 157, .adj_below = -41, .adj_above = 116, .read_fuses = rcar_gen3_thermal_read_fuses_gen3, }; static const struct rcar_thermal_info rcar_gen3_thermal_info = { .scale = 167, .adj_below = -41, .adj_above = 126, .read_fuses = rcar_gen3_thermal_read_fuses_gen3, }; static const struct rcar_thermal_info rcar_gen4_thermal_info = { .scale = 167, .adj_below = -41, .adj_above = 126, .read_fuses = rcar_gen3_thermal_read_fuses_gen4, }; static const struct of_device_id rcar_gen3_thermal_dt_ids[] = { { .compatible = "renesas,r8a774a1-thermal", .data = &rcar_m3w_thermal_info, }, { .compatible = "renesas,r8a774b1-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a774e1-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a7795-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a7796-thermal", .data = &rcar_m3w_thermal_info, }, { .compatible = "renesas,r8a77961-thermal", .data = &rcar_m3w_thermal_info, }, { .compatible = "renesas,r8a77965-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a77980-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a779a0-thermal", .data = &rcar_gen3_thermal_info, }, { .compatible = "renesas,r8a779f0-thermal", .data = &rcar_gen4_thermal_info, }, { .compatible = "renesas,r8a779g0-thermal", .data = &rcar_gen4_thermal_info, }, { .compatible = "renesas,r8a779h0-thermal", .data = &rcar_gen4_thermal_info, }, {}, }; MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids); static void rcar_gen3_thermal_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; pm_runtime_put(dev); pm_runtime_disable(dev); } static void rcar_gen3_hwmon_action(void *data) { struct thermal_zone_device *zone = data; thermal_remove_hwmon_sysfs(zone); } static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv, struct platform_device *pdev) { struct device *dev = &pdev->dev; unsigned int i; char *irqname; int ret, irq; for (i = 0; i < 2; i++) { irq = platform_get_irq_optional(pdev, i); if (irq < 0) return irq; irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d", dev_name(dev), i); if (!irqname) return -ENOMEM; ret = devm_request_threaded_irq(dev, irq, NULL, rcar_gen3_thermal_irq, IRQF_ONESHOT, irqname, priv); if (ret) return ret; } return 0; } static int rcar_gen3_thermal_probe(struct platform_device *pdev) { struct rcar_gen3_thermal_priv *priv; struct device *dev = &pdev->dev; struct resource *res; struct thermal_zone_device *zone; unsigned int i; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->ops = rcar_gen3_tz_of_ops; priv->info = of_device_get_match_data(dev); platform_set_drvdata(pdev, priv); if (rcar_gen3_thermal_request_irqs(priv, pdev)) priv->ops.set_trips = NULL; pm_runtime_enable(dev); pm_runtime_get_sync(dev); for (i = 0; i < TSC_MAX_NUM; i++) { struct rcar_gen3_thermal_tsc *tsc; res = platform_get_resource(pdev, IORESOURCE_MEM, i); if (!res) break; tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL); if (!tsc) { ret = -ENOMEM; goto error_unregister; } tsc->priv = priv; tsc->base = devm_ioremap_resource(dev, res); if (IS_ERR(tsc->base)) { ret = PTR_ERR(tsc->base); goto error_unregister; } priv->tscs[i] = tsc; } priv->num_tscs = i; if (!rcar_gen3_thermal_read_fuses(priv)) dev_info(dev, "No calibration values fused, fallback to driver values\n"); rcar_gen3_thermal_shared_coefs(priv); for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; rcar_gen3_thermal_init(priv, tsc); rcar_gen3_thermal_tsc_coefs(priv, tsc); zone = devm_thermal_of_zone_register(dev, i, tsc, &priv->ops); if (IS_ERR(zone)) { dev_err(dev, "Sensor %u: Can't register thermal zone\n", i); ret = PTR_ERR(zone); goto error_unregister; } tsc->zone = zone; ret = thermal_add_hwmon_sysfs(tsc->zone); if (ret) goto error_unregister; ret = devm_add_action_or_reset(dev, rcar_gen3_hwmon_action, zone); if (ret) goto error_unregister; ret = thermal_zone_get_num_trips(tsc->zone); if (ret < 0) goto error_unregister; dev_info(dev, "Sensor %u: Loaded %d trip points\n", i, ret); } if (!priv->num_tscs) { ret = -ENODEV; goto error_unregister; } return 0; error_unregister: rcar_gen3_thermal_remove(pdev); return ret; } static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev) { struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev); unsigned int i; for (i = 0; i < priv->num_tscs; i++) { struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i]; rcar_gen3_thermal_init(priv, tsc); } return 0; } static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, NULL, rcar_gen3_thermal_resume); static struct platform_driver rcar_gen3_thermal_driver = { .driver = { .name = "rcar_gen3_thermal", .pm = &rcar_gen3_thermal_pm_ops, .of_match_table = rcar_gen3_thermal_dt_ids, }, .probe = rcar_gen3_thermal_probe, .remove_new = rcar_gen3_thermal_remove, }; module_platform_driver(rcar_gen3_thermal_driver); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver"); MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1