Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Benjamin Herrenschmidt | 4287 | 37.99% | 9 | 5.00% |
Linus Torvalds (pre-git) | 2946 | 26.11% | 66 | 36.67% |
James Simmons | 2670 | 23.66% | 26 | 14.44% |
Michael Hanselmann | 716 | 6.35% | 3 | 1.67% |
Vaibhav Gupta | 149 | 1.32% | 1 | 0.56% |
Julia Lawall | 105 | 0.93% | 2 | 1.11% |
Antonino A. Daplas | 75 | 0.66% | 10 | 5.56% |
Thomas Zimmermann | 44 | 0.39% | 6 | 3.33% |
Richard Purdie | 41 | 0.36% | 5 | 2.78% |
Witold Filipczyk | 37 | 0.33% | 1 | 0.56% |
Linus Torvalds | 31 | 0.27% | 5 | 2.78% |
Matthew Garrett | 23 | 0.20% | 2 | 1.11% |
Pavel Machek | 21 | 0.19% | 3 | 1.67% |
Roel Kluin | 8 | 0.07% | 2 | 1.11% |
Greg Kroah-Hartman | 8 | 0.07% | 1 | 0.56% |
Colin Ian King | 8 | 0.07% | 1 | 0.56% |
Andrew Morton | 8 | 0.07% | 2 | 1.11% |
Jesse Barnes | 8 | 0.07% | 1 | 0.56% |
Jeff Garzik | 7 | 0.06% | 1 | 0.56% |
Grant C. Likely | 7 | 0.06% | 1 | 0.56% |
Torben Hohn | 7 | 0.06% | 1 | 0.56% |
Al Viro | 7 | 0.06% | 1 | 0.56% |
Joe Perches | 7 | 0.06% | 2 | 1.11% |
Paul Mackerras | 7 | 0.06% | 2 | 1.11% |
Luis R. Rodriguez | 6 | 0.05% | 1 | 0.56% |
Jonathan Woithe | 6 | 0.05% | 1 | 0.56% |
David Howells | 5 | 0.04% | 1 | 0.56% |
Randy Dunlap | 4 | 0.04% | 1 | 0.56% |
Christoph Hellwig | 4 | 0.04% | 1 | 0.56% |
Stephen Kitt | 3 | 0.03% | 1 | 0.56% |
Jon Mason | 3 | 0.03% | 1 | 0.56% |
Emil Goode | 3 | 0.03% | 1 | 0.56% |
Olaf Hering | 3 | 0.03% | 1 | 0.56% |
Anton Blanchard | 2 | 0.02% | 1 | 0.56% |
Rusty Russell | 2 | 0.02% | 1 | 0.56% |
Kevin Hao | 2 | 0.02% | 1 | 0.56% |
Bartlomiej Zolnierkiewicz | 1 | 0.01% | 1 | 0.56% |
Arvind Yadav | 1 | 0.01% | 1 | 0.56% |
Bhumika Goyal | 1 | 0.01% | 1 | 0.56% |
Lionel Debroux | 1 | 0.01% | 1 | 0.56% |
Harvey Harrison | 1 | 0.01% | 1 | 0.56% |
Thomas Gleixner | 1 | 0.01% | 1 | 0.56% |
Jani Nikula | 1 | 0.01% | 1 | 0.56% |
Arjan van de Ven | 1 | 0.01% | 1 | 0.56% |
Krzysztof Helt | 1 | 0.01% | 1 | 0.56% |
Tobias Klauser | 1 | 0.01% | 1 | 0.56% |
Gustavo A. R. Silva | 1 | 0.01% | 1 | 0.56% |
Kay Sievers | 1 | 0.01% | 1 | 0.56% |
Jia-Ju Bai | 1 | 0.01% | 1 | 0.56% |
Andi Kleen | 1 | 0.01% | 1 | 0.56% |
Total | 11284 | 180 |
// SPDX-License-Identifier: GPL-2.0-only /* $Id: aty128fb.c,v 1.1.1.1.36.1 1999/12/11 09:03:05 Exp $ * linux/drivers/video/aty128fb.c -- Frame buffer device for ATI Rage128 * * Copyright (C) 1999-2003, Brad Douglas <brad@neruo.com> * Copyright (C) 1999, Anthony Tong <atong@uiuc.edu> * * Ani Joshi / Jeff Garzik * - Code cleanup * * Michel Danzer <michdaen@iiic.ethz.ch> * - 15/16 bit cleanup * - fix panning * * Benjamin Herrenschmidt * - pmac-specific PM stuff * - various fixes & cleanups * * Andreas Hundt <andi@convergence.de> * - FB_ACTIVATE fixes * * Paul Mackerras <paulus@samba.org> * - Convert to new framebuffer API, * fix colormap setting at 16 bits/pixel (565) * * Paul Mundt * - PCI hotplug * * Jon Smirl <jonsmirl@yahoo.com> * - PCI ID update * - replace ROM BIOS search * * Based off of Geert's atyfb.c and vfb.c. * * TODO: * - monitor sensing (DDC) * - virtual display * - other platform support (only ppc/x86 supported) * - hardware cursor support * * Please cc: your patches to brad@neruo.com. */ /* * A special note of gratitude to ATI's devrel for providing documentation, * example code and hardware. Thanks Nitya. -atong and brad */ #include <linux/aperture.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/errno.h> #include <linux/string.h> #include <linux/mm.h> #include <linux/vmalloc.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/uaccess.h> #include <linux/fb.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ioport.h> #include <linux/console.h> #include <linux/backlight.h> #include <asm/io.h> #ifdef CONFIG_PPC_PMAC #include <asm/machdep.h> #include <asm/pmac_feature.h> #include "../macmodes.h" #endif #ifdef CONFIG_PMAC_BACKLIGHT #include <asm/backlight.h> #endif #ifdef CONFIG_BOOTX_TEXT #include <asm/btext.h> #endif /* CONFIG_BOOTX_TEXT */ #include <video/aty128.h> /* Debug flag */ #undef DEBUG #ifdef DEBUG #define DBG(fmt, args...) \ printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args); #else #define DBG(fmt, args...) #endif #ifndef CONFIG_PPC_PMAC /* default mode */ static const struct fb_var_screeninfo default_var = { /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */ 640, 480, 640, 480, 0, 0, 8, 0, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, 0, -1, -1, 0, 39722, 48, 16, 33, 10, 96, 2, 0, FB_VMODE_NONINTERLACED }; #else /* CONFIG_PPC_PMAC */ /* default to 1024x768 at 75Hz on PPC - this will work * on the iMac, the usual 640x480 @ 60Hz doesn't. */ static const struct fb_var_screeninfo default_var = { /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */ 1024, 768, 1024, 768, 0, 0, 8, 0, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0, 0, -1, -1, 0, 12699, 160, 32, 28, 1, 96, 3, FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED }; #endif /* CONFIG_PPC_PMAC */ /* default modedb mode */ /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */ static const struct fb_videomode defaultmode = { .refresh = 60, .xres = 640, .yres = 480, .pixclock = 39722, .left_margin = 48, .right_margin = 16, .upper_margin = 33, .lower_margin = 10, .hsync_len = 96, .vsync_len = 2, .sync = 0, .vmode = FB_VMODE_NONINTERLACED }; /* Chip generations */ enum { rage_128, rage_128_pci, rage_128_pro, rage_128_pro_pci, rage_M3, rage_M3_pci, rage_M4, rage_128_ultra, }; /* Must match above enum */ static char * const r128_family[] = { "AGP", "PCI", "PRO AGP", "PRO PCI", "M3 AGP", "M3 PCI", "M4 AGP", "Ultra AGP", }; /* * PCI driver prototypes */ static int aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent); static void aty128_remove(struct pci_dev *pdev); static int aty128_pci_suspend_late(struct device *dev, pm_message_t state); static int __maybe_unused aty128_pci_suspend(struct device *dev); static int __maybe_unused aty128_pci_hibernate(struct device *dev); static int __maybe_unused aty128_pci_freeze(struct device *dev); static int __maybe_unused aty128_pci_resume(struct device *dev); static int aty128_do_resume(struct pci_dev *pdev); static const struct dev_pm_ops aty128_pci_pm_ops = { .suspend = aty128_pci_suspend, .resume = aty128_pci_resume, .freeze = aty128_pci_freeze, .thaw = aty128_pci_resume, .poweroff = aty128_pci_hibernate, .restore = aty128_pci_resume, }; /* supported Rage128 chipsets */ static const struct pci_device_id aty128_pci_tbl[] = { { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_MF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_ML, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PH, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PJ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PK, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PN, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PO, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PQ, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PS, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PT, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PV, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PW, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PX, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RK, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SG, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SH, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SK, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SM, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SN, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TL, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TR, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TS, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TT, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TU, PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra }, { 0, } }; MODULE_DEVICE_TABLE(pci, aty128_pci_tbl); static struct pci_driver aty128fb_driver = { .name = "aty128fb", .id_table = aty128_pci_tbl, .probe = aty128_probe, .remove = aty128_remove, .driver.pm = &aty128_pci_pm_ops, }; /* packed BIOS settings */ #ifndef CONFIG_PPC typedef struct { u8 clock_chip_type; u8 struct_size; u8 accelerator_entry; u8 VGA_entry; u16 VGA_table_offset; u16 POST_table_offset; u16 XCLK; u16 MCLK; u8 num_PLL_blocks; u8 size_PLL_blocks; u16 PCLK_ref_freq; u16 PCLK_ref_divider; u32 PCLK_min_freq; u32 PCLK_max_freq; u16 MCLK_ref_freq; u16 MCLK_ref_divider; u32 MCLK_min_freq; u32 MCLK_max_freq; u16 XCLK_ref_freq; u16 XCLK_ref_divider; u32 XCLK_min_freq; u32 XCLK_max_freq; } __attribute__ ((packed)) PLL_BLOCK; #endif /* !CONFIG_PPC */ /* onboard memory information */ struct aty128_meminfo { u8 ML; u8 MB; u8 Trcd; u8 Trp; u8 Twr; u8 CL; u8 Tr2w; u8 LoopLatency; u8 DspOn; u8 Rloop; const char *name; }; /* various memory configurations */ static const struct aty128_meminfo sdr_128 = { .ML = 4, .MB = 4, .Trcd = 3, .Trp = 3, .Twr = 1, .CL = 3, .Tr2w = 1, .LoopLatency = 16, .DspOn = 30, .Rloop = 16, .name = "128-bit SDR SGRAM (1:1)", }; static const struct aty128_meminfo sdr_sgram = { .ML = 4, .MB = 4, .Trcd = 1, .Trp = 2, .Twr = 1, .CL = 2, .Tr2w = 1, .LoopLatency = 16, .DspOn = 24, .Rloop = 16, .name = "64-bit SDR SGRAM (2:1)", }; static const struct aty128_meminfo ddr_sgram = { .ML = 4, .MB = 4, .Trcd = 3, .Trp = 3, .Twr = 2, .CL = 3, .Tr2w = 1, .LoopLatency = 16, .DspOn = 31, .Rloop = 16, .name = "64-bit DDR SGRAM", }; static const struct fb_fix_screeninfo aty128fb_fix = { .id = "ATY Rage128", .type = FB_TYPE_PACKED_PIXELS, .visual = FB_VISUAL_PSEUDOCOLOR, .xpanstep = 8, .ypanstep = 1, .mmio_len = 0x2000, .accel = FB_ACCEL_ATI_RAGE128, }; static char *mode_option = NULL; #ifdef CONFIG_PPC_PMAC static int default_vmode = VMODE_1024_768_60; static int default_cmode = CMODE_8; #endif static int default_crt_on = 0; static int default_lcd_on = 1; static bool mtrr = true; #ifdef CONFIG_FB_ATY128_BACKLIGHT static int backlight = IS_BUILTIN(CONFIG_PMAC_BACKLIGHT); #endif /* PLL constants */ struct aty128_constants { u32 ref_clk; u32 ppll_min; u32 ppll_max; u32 ref_divider; u32 xclk; u32 fifo_width; u32 fifo_depth; }; struct aty128_crtc { u32 gen_cntl; u32 h_total, h_sync_strt_wid; u32 v_total, v_sync_strt_wid; u32 pitch; u32 offset, offset_cntl; u32 xoffset, yoffset; u32 vxres, vyres; u32 depth, bpp; }; struct aty128_pll { u32 post_divider; u32 feedback_divider; u32 vclk; }; struct aty128_ddafifo { u32 dda_config; u32 dda_on_off; }; /* register values for a specific mode */ struct aty128fb_par { struct aty128_crtc crtc; struct aty128_pll pll; struct aty128_ddafifo fifo_reg; u32 accel_flags; struct aty128_constants constants; /* PLL and others */ void __iomem *regbase; /* remapped mmio */ u32 vram_size; /* onboard video ram */ int chip_gen; const struct aty128_meminfo *mem; /* onboard mem info */ int wc_cookie; int blitter_may_be_busy; int fifo_slots; /* free slots in FIFO (64 max) */ int crt_on, lcd_on; struct pci_dev *pdev; struct fb_info *next; int asleep; int lock_blank; u8 red[32]; /* see aty128fb_setcolreg */ u8 green[64]; u8 blue[32]; u32 pseudo_palette[16]; /* used for TRUECOLOR */ }; #define round_div(n, d) ((n+(d/2))/d) static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info); static int aty128fb_set_par(struct fb_info *info); static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info); static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fb); static int aty128fb_blank(int blank, struct fb_info *fb); static int aty128fb_ioctl(struct fb_info *info, u_int cmd, unsigned long arg); static int aty128fb_sync(struct fb_info *info); /* * Internal routines */ static int aty128_encode_var(struct fb_var_screeninfo *var, const struct aty128fb_par *par); static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par); static void aty128_timings(struct aty128fb_par *par); static void aty128_init_engine(struct aty128fb_par *par); static void aty128_reset_engine(const struct aty128fb_par *par); static void aty128_flush_pixel_cache(const struct aty128fb_par *par); static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_fifo(u16 entries, struct aty128fb_par *par); static void wait_for_idle(struct aty128fb_par *par); static u32 depth_to_dst(u32 depth); #ifdef CONFIG_FB_ATY128_BACKLIGHT static void aty128_bl_set_power(struct fb_info *info, int power); #endif #define BIOS_IN8(v) (readb(bios + (v))) #define BIOS_IN16(v) (readb(bios + (v)) | \ (readb(bios + (v) + 1) << 8)) #define BIOS_IN32(v) (readb(bios + (v)) | \ (readb(bios + (v) + 1) << 8) | \ (readb(bios + (v) + 2) << 16) | \ (readb(bios + (v) + 3) << 24)) static const struct fb_ops aty128fb_ops = { .owner = THIS_MODULE, FB_DEFAULT_IOMEM_OPS, .fb_check_var = aty128fb_check_var, .fb_set_par = aty128fb_set_par, .fb_setcolreg = aty128fb_setcolreg, .fb_pan_display = aty128fb_pan_display, .fb_blank = aty128fb_blank, .fb_ioctl = aty128fb_ioctl, .fb_sync = aty128fb_sync, }; /* * Functions to read from/write to the mmio registers * - endian conversions may possibly be avoided by * using the other register aperture. TODO. */ static inline u32 _aty_ld_le32(volatile unsigned int regindex, const struct aty128fb_par *par) { return readl (par->regbase + regindex); } static inline void _aty_st_le32(volatile unsigned int regindex, u32 val, const struct aty128fb_par *par) { writel (val, par->regbase + regindex); } static inline u8 _aty_ld_8(unsigned int regindex, const struct aty128fb_par *par) { return readb (par->regbase + regindex); } static inline void _aty_st_8(unsigned int regindex, u8 val, const struct aty128fb_par *par) { writeb (val, par->regbase + regindex); } #define aty_ld_le32(regindex) _aty_ld_le32(regindex, par) #define aty_st_le32(regindex, val) _aty_st_le32(regindex, val, par) #define aty_ld_8(regindex) _aty_ld_8(regindex, par) #define aty_st_8(regindex, val) _aty_st_8(regindex, val, par) /* * Functions to read from/write to the pll registers */ #define aty_ld_pll(pll_index) _aty_ld_pll(pll_index, par) #define aty_st_pll(pll_index, val) _aty_st_pll(pll_index, val, par) static u32 _aty_ld_pll(unsigned int pll_index, const struct aty128fb_par *par) { aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F); return aty_ld_le32(CLOCK_CNTL_DATA); } static void _aty_st_pll(unsigned int pll_index, u32 val, const struct aty128fb_par *par) { aty_st_8(CLOCK_CNTL_INDEX, (pll_index & 0x3F) | PLL_WR_EN); aty_st_le32(CLOCK_CNTL_DATA, val); } /* return true when the PLL has completed an atomic update */ static int aty_pll_readupdate(const struct aty128fb_par *par) { return !(aty_ld_pll(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R); } static void aty_pll_wait_readupdate(const struct aty128fb_par *par) { unsigned long timeout = jiffies + HZ/100; // should be more than enough int reset = 1; while (time_before(jiffies, timeout)) if (aty_pll_readupdate(par)) { reset = 0; break; } if (reset) /* reset engine?? */ printk(KERN_DEBUG "aty128fb: PLL write timeout!\n"); } /* tell PLL to update */ static void aty_pll_writeupdate(const struct aty128fb_par *par) { aty_pll_wait_readupdate(par); aty_st_pll(PPLL_REF_DIV, aty_ld_pll(PPLL_REF_DIV) | PPLL_ATOMIC_UPDATE_W); } /* write to the scratch register to test r/w functionality */ static int register_test(const struct aty128fb_par *par) { u32 val; int flag = 0; val = aty_ld_le32(BIOS_0_SCRATCH); aty_st_le32(BIOS_0_SCRATCH, 0x55555555); if (aty_ld_le32(BIOS_0_SCRATCH) == 0x55555555) { aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA); if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA) flag = 1; } aty_st_le32(BIOS_0_SCRATCH, val); // restore value return flag; } /* * Accelerator engine functions */ static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par) { int i; for (;;) { for (i = 0; i < 2000000; i++) { par->fifo_slots = aty_ld_le32(GUI_STAT) & 0x0fff; if (par->fifo_slots >= entries) return; } aty128_reset_engine(par); } } static void wait_for_idle(struct aty128fb_par *par) { int i; do_wait_for_fifo(64, par); for (;;) { for (i = 0; i < 2000000; i++) { if (!(aty_ld_le32(GUI_STAT) & (1 << 31))) { aty128_flush_pixel_cache(par); par->blitter_may_be_busy = 0; return; } } aty128_reset_engine(par); } } static void wait_for_fifo(u16 entries, struct aty128fb_par *par) { if (par->fifo_slots < entries) do_wait_for_fifo(64, par); par->fifo_slots -= entries; } static void aty128_flush_pixel_cache(const struct aty128fb_par *par) { int i; u32 tmp; tmp = aty_ld_le32(PC_NGUI_CTLSTAT); tmp &= ~(0x00ff); tmp |= 0x00ff; aty_st_le32(PC_NGUI_CTLSTAT, tmp); for (i = 0; i < 2000000; i++) if (!(aty_ld_le32(PC_NGUI_CTLSTAT) & PC_BUSY)) break; } static void aty128_reset_engine(const struct aty128fb_par *par) { u32 gen_reset_cntl, clock_cntl_index, mclk_cntl; aty128_flush_pixel_cache(par); clock_cntl_index = aty_ld_le32(CLOCK_CNTL_INDEX); mclk_cntl = aty_ld_pll(MCLK_CNTL); aty_st_pll(MCLK_CNTL, mclk_cntl | 0x00030000); gen_reset_cntl = aty_ld_le32(GEN_RESET_CNTL); aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl | SOFT_RESET_GUI); aty_ld_le32(GEN_RESET_CNTL); aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl & ~(SOFT_RESET_GUI)); aty_ld_le32(GEN_RESET_CNTL); aty_st_pll(MCLK_CNTL, mclk_cntl); aty_st_le32(CLOCK_CNTL_INDEX, clock_cntl_index); aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl); /* use old pio mode */ aty_st_le32(PM4_BUFFER_CNTL, PM4_BUFFER_CNTL_NONPM4); DBG("engine reset"); } static void aty128_init_engine(struct aty128fb_par *par) { u32 pitch_value; wait_for_idle(par); /* 3D scaler not spoken here */ wait_for_fifo(1, par); aty_st_le32(SCALE_3D_CNTL, 0x00000000); aty128_reset_engine(par); pitch_value = par->crtc.pitch; if (par->crtc.bpp == 24) { pitch_value = pitch_value * 3; } wait_for_fifo(4, par); /* setup engine offset registers */ aty_st_le32(DEFAULT_OFFSET, 0x00000000); /* setup engine pitch registers */ aty_st_le32(DEFAULT_PITCH, pitch_value); /* set the default scissor register to max dimensions */ aty_st_le32(DEFAULT_SC_BOTTOM_RIGHT, (0x1FFF << 16) | 0x1FFF); /* set the drawing controls registers */ aty_st_le32(DP_GUI_MASTER_CNTL, GMC_SRC_PITCH_OFFSET_DEFAULT | GMC_DST_PITCH_OFFSET_DEFAULT | GMC_SRC_CLIP_DEFAULT | GMC_DST_CLIP_DEFAULT | GMC_BRUSH_SOLIDCOLOR | (depth_to_dst(par->crtc.depth) << 8) | GMC_SRC_DSTCOLOR | GMC_BYTE_ORDER_MSB_TO_LSB | GMC_DP_CONVERSION_TEMP_6500 | ROP3_PATCOPY | GMC_DP_SRC_RECT | GMC_3D_FCN_EN_CLR | GMC_DST_CLR_CMP_FCN_CLEAR | GMC_AUX_CLIP_CLEAR | GMC_WRITE_MASK_SET); wait_for_fifo(8, par); /* clear the line drawing registers */ aty_st_le32(DST_BRES_ERR, 0); aty_st_le32(DST_BRES_INC, 0); aty_st_le32(DST_BRES_DEC, 0); /* set brush color registers */ aty_st_le32(DP_BRUSH_FRGD_CLR, 0xFFFFFFFF); /* white */ aty_st_le32(DP_BRUSH_BKGD_CLR, 0x00000000); /* black */ /* set source color registers */ aty_st_le32(DP_SRC_FRGD_CLR, 0xFFFFFFFF); /* white */ aty_st_le32(DP_SRC_BKGD_CLR, 0x00000000); /* black */ /* default write mask */ aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF); /* Wait for all the writes to be completed before returning */ wait_for_idle(par); } /* convert depth values to their register representation */ static u32 depth_to_dst(u32 depth) { if (depth <= 8) return DST_8BPP; else if (depth <= 15) return DST_15BPP; else if (depth == 16) return DST_16BPP; else if (depth <= 24) return DST_24BPP; else if (depth <= 32) return DST_32BPP; return -EINVAL; } /* * PLL informations retreival */ #ifndef __sparc__ static void __iomem *aty128_map_ROM(const struct aty128fb_par *par, struct pci_dev *dev) { u16 dptr; u8 rom_type; void __iomem *bios; size_t rom_size; /* Fix from ATI for problem with Rage128 hardware not leaving ROM enabled */ unsigned int temp; temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG); temp &= 0x00ffffffu; temp |= 0x04 << 24; aty_st_le32(RAGE128_MPP_TB_CONFIG, temp); temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG); bios = pci_map_rom(dev, &rom_size); if (!bios) { printk(KERN_ERR "aty128fb: ROM failed to map\n"); return NULL; } /* Very simple test to make sure it appeared */ if (BIOS_IN16(0) != 0xaa55) { printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should " " be 0xaa55\n", BIOS_IN16(0)); goto failed; } /* Look for the PCI data to check the ROM type */ dptr = BIOS_IN16(0x18); /* Check the PCI data signature. If it's wrong, we still assume a normal * x86 ROM for now, until I've verified this works everywhere. * The goal here is more to phase out Open Firmware images. * * Currently, we only look at the first PCI data, we could iteratre and * deal with them all, and we should use fb_bios_start relative to start * of image and not relative start of ROM, but so far, I never found a * dual-image ATI card. * * typedef struct { * u32 signature; + 0x00 * u16 vendor; + 0x04 * u16 device; + 0x06 * u16 reserved_1; + 0x08 * u16 dlen; + 0x0a * u8 drevision; + 0x0c * u8 class_hi; + 0x0d * u16 class_lo; + 0x0e * u16 ilen; + 0x10 * u16 irevision; + 0x12 * u8 type; + 0x14 * u8 indicator; + 0x15 * u16 reserved_2; + 0x16 * } pci_data_t; */ if (BIOS_IN32(dptr) != (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) { printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n", BIOS_IN32(dptr)); goto anyway; } rom_type = BIOS_IN8(dptr + 0x14); switch(rom_type) { case 0: printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n"); break; case 1: printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n"); goto failed; case 2: printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n"); goto failed; default: printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", rom_type); goto failed; } anyway: return bios; failed: pci_unmap_rom(dev, bios); return NULL; } static void aty128_get_pllinfo(struct aty128fb_par *par, unsigned char __iomem *bios) { unsigned int bios_hdr; unsigned int bios_pll; bios_hdr = BIOS_IN16(0x48); bios_pll = BIOS_IN16(bios_hdr + 0x30); par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16); par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12); par->constants.xclk = BIOS_IN16(bios_pll + 0x08); par->constants.ref_divider = BIOS_IN16(bios_pll + 0x10); par->constants.ref_clk = BIOS_IN16(bios_pll + 0x0e); DBG("ppll_max %d ppll_min %d xclk %d ref_divider %d ref clock %d\n", par->constants.ppll_max, par->constants.ppll_min, par->constants.xclk, par->constants.ref_divider, par->constants.ref_clk); } #ifdef CONFIG_X86 static void __iomem *aty128_find_mem_vbios(struct aty128fb_par *par) { /* I simplified this code as we used to miss the signatures in * a lot of case. It's now closer to XFree, we just don't check * for signatures at all... Something better will have to be done * if we end up having conflicts */ u32 segstart; unsigned char __iomem *rom_base = NULL; for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) { rom_base = ioremap(segstart, 0x10000); if (rom_base == NULL) return NULL; if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa) break; iounmap(rom_base); rom_base = NULL; } return rom_base; } #endif #endif /* ndef(__sparc__) */ /* fill in known card constants if pll_block is not available */ static void aty128_timings(struct aty128fb_par *par) { #ifdef CONFIG_PPC /* instead of a table lookup, assume OF has properly * setup the PLL registers and use their values * to set the XCLK values and reference divider values */ u32 x_mpll_ref_fb_div; u32 xclk_cntl; u32 Nx, M; static const unsigned int PostDivSet[] = { 0, 1, 2, 4, 8, 3, 6, 12 }; #endif if (!par->constants.ref_clk) par->constants.ref_clk = 2950; #ifdef CONFIG_PPC x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV); xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7; Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8; M = x_mpll_ref_fb_div & 0x0000ff; par->constants.xclk = round_div((2 * Nx * par->constants.ref_clk), (M * PostDivSet[xclk_cntl])); par->constants.ref_divider = aty_ld_pll(PPLL_REF_DIV) & PPLL_REF_DIV_MASK; #endif if (!par->constants.ref_divider) { par->constants.ref_divider = 0x3b; aty_st_pll(X_MPLL_REF_FB_DIV, 0x004c4c1e); aty_pll_writeupdate(par); } aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider); aty_pll_writeupdate(par); /* from documentation */ if (!par->constants.ppll_min) par->constants.ppll_min = 12500; if (!par->constants.ppll_max) par->constants.ppll_max = 25000; /* 23000 on some cards? */ if (!par->constants.xclk) par->constants.xclk = 0x1d4d; /* same as mclk */ par->constants.fifo_width = 128; par->constants.fifo_depth = 32; switch (aty_ld_le32(MEM_CNTL) & 0x3) { case 0: par->mem = &sdr_128; break; case 1: par->mem = &sdr_sgram; break; case 2: par->mem = &ddr_sgram; break; default: par->mem = &sdr_sgram; } } /* * CRTC programming */ /* Program the CRTC registers */ static void aty128_set_crtc(const struct aty128_crtc *crtc, const struct aty128fb_par *par) { aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl); aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_total); aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid); aty_st_le32(CRTC_V_TOTAL_DISP, crtc->v_total); aty_st_le32(CRTC_V_SYNC_STRT_WID, crtc->v_sync_strt_wid); aty_st_le32(CRTC_PITCH, crtc->pitch); aty_st_le32(CRTC_OFFSET, crtc->offset); aty_st_le32(CRTC_OFFSET_CNTL, crtc->offset_cntl); /* Disable ATOMIC updating. Is this the right place? */ aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~(0x00030000)); } static int aty128_var_to_crtc(const struct fb_var_screeninfo *var, struct aty128_crtc *crtc, const struct aty128fb_par *par) { u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp, dst; u32 left, right, upper, lower, hslen, vslen, sync, vmode; u32 h_total, h_disp, h_sync_strt, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync; u32 depth, bytpp; u8 mode_bytpp[7] = { 0, 0, 1, 2, 2, 3, 4 }; /* input */ xres = var->xres; yres = var->yres; vxres = var->xres_virtual; vyres = var->yres_virtual; xoffset = var->xoffset; yoffset = var->yoffset; bpp = var->bits_per_pixel; left = var->left_margin; right = var->right_margin; upper = var->upper_margin; lower = var->lower_margin; hslen = var->hsync_len; vslen = var->vsync_len; sync = var->sync; vmode = var->vmode; if (bpp != 16) depth = bpp; else depth = (var->green.length == 6) ? 16 : 15; /* check for mode eligibility * accept only non interlaced modes */ if ((vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED) return -EINVAL; /* convert (and round up) and validate */ xres = (xres + 7) & ~7; xoffset = (xoffset + 7) & ~7; if (vxres < xres + xoffset) vxres = xres + xoffset; if (vyres < yres + yoffset) vyres = yres + yoffset; /* convert depth into ATI register depth */ dst = depth_to_dst(depth); if (dst == -EINVAL) { printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n"); return -EINVAL; } /* convert register depth to bytes per pixel */ bytpp = mode_bytpp[dst]; /* make sure there is enough video ram for the mode */ if ((u32)(vxres * vyres * bytpp) > par->vram_size) { printk(KERN_ERR "aty128fb: Not enough memory for mode\n"); return -EINVAL; } h_disp = (xres >> 3) - 1; h_total = (((xres + right + hslen + left) >> 3) - 1) & 0xFFFFL; v_disp = yres - 1; v_total = (yres + upper + vslen + lower - 1) & 0xFFFFL; /* check to make sure h_total and v_total are in range */ if (((h_total >> 3) - 1) > 0x1ff || (v_total - 1) > 0x7FF) { printk(KERN_ERR "aty128fb: invalid width ranges\n"); return -EINVAL; } h_sync_wid = (hslen + 7) >> 3; if (h_sync_wid == 0) h_sync_wid = 1; else if (h_sync_wid > 0x3f) /* 0x3f = max hwidth */ h_sync_wid = 0x3f; h_sync_strt = (h_disp << 3) + right; v_sync_wid = vslen; if (v_sync_wid == 0) v_sync_wid = 1; else if (v_sync_wid > 0x1f) /* 0x1f = max vwidth */ v_sync_wid = 0x1f; v_sync_strt = v_disp + lower; h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1; v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1; c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0; crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8); crtc->h_total = h_total | (h_disp << 16); crtc->v_total = v_total | (v_disp << 16); crtc->h_sync_strt_wid = h_sync_strt | (h_sync_wid << 16) | (h_sync_pol << 23); crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) | (v_sync_pol << 23); crtc->pitch = vxres >> 3; crtc->offset = 0; if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) crtc->offset_cntl = 0x00010000; else crtc->offset_cntl = 0; crtc->vxres = vxres; crtc->vyres = vyres; crtc->xoffset = xoffset; crtc->yoffset = yoffset; crtc->depth = depth; crtc->bpp = bpp; return 0; } static int aty128_pix_width_to_var(int pix_width, struct fb_var_screeninfo *var) { /* fill in pixel info */ var->red.msb_right = 0; var->green.msb_right = 0; var->blue.offset = 0; var->blue.msb_right = 0; var->transp.offset = 0; var->transp.length = 0; var->transp.msb_right = 0; switch (pix_width) { case CRTC_PIX_WIDTH_8BPP: var->bits_per_pixel = 8; var->red.offset = 0; var->red.length = 8; var->green.offset = 0; var->green.length = 8; var->blue.length = 8; break; case CRTC_PIX_WIDTH_15BPP: var->bits_per_pixel = 16; var->red.offset = 10; var->red.length = 5; var->green.offset = 5; var->green.length = 5; var->blue.length = 5; break; case CRTC_PIX_WIDTH_16BPP: var->bits_per_pixel = 16; var->red.offset = 11; var->red.length = 5; var->green.offset = 5; var->green.length = 6; var->blue.length = 5; break; case CRTC_PIX_WIDTH_24BPP: var->bits_per_pixel = 24; var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.length = 8; break; case CRTC_PIX_WIDTH_32BPP: var->bits_per_pixel = 32; var->red.offset = 16; var->red.length = 8; var->green.offset = 8; var->green.length = 8; var->blue.length = 8; var->transp.offset = 24; var->transp.length = 8; break; default: printk(KERN_ERR "aty128fb: Invalid pixel width\n"); return -EINVAL; } return 0; } static int aty128_crtc_to_var(const struct aty128_crtc *crtc, struct fb_var_screeninfo *var) { u32 xres, yres, left, right, upper, lower, hslen, vslen, sync; u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol; u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync; u32 pix_width; /* fun with masking */ h_total = crtc->h_total & 0x1ff; h_disp = (crtc->h_total >> 16) & 0xff; h_sync_strt = (crtc->h_sync_strt_wid >> 3) & 0x1ff; h_sync_dly = crtc->h_sync_strt_wid & 0x7; h_sync_wid = (crtc->h_sync_strt_wid >> 16) & 0x3f; h_sync_pol = (crtc->h_sync_strt_wid >> 23) & 0x1; v_total = crtc->v_total & 0x7ff; v_disp = (crtc->v_total >> 16) & 0x7ff; v_sync_strt = crtc->v_sync_strt_wid & 0x7ff; v_sync_wid = (crtc->v_sync_strt_wid >> 16) & 0x1f; v_sync_pol = (crtc->v_sync_strt_wid >> 23) & 0x1; c_sync = crtc->gen_cntl & CRTC_CSYNC_EN ? 1 : 0; pix_width = crtc->gen_cntl & CRTC_PIX_WIDTH_MASK; /* do conversions */ xres = (h_disp + 1) << 3; yres = v_disp + 1; left = ((h_total - h_sync_strt - h_sync_wid) << 3) - h_sync_dly; right = ((h_sync_strt - h_disp) << 3) + h_sync_dly; hslen = h_sync_wid << 3; upper = v_total - v_sync_strt - v_sync_wid; lower = v_sync_strt - v_disp; vslen = v_sync_wid; sync = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) | (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) | (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0); aty128_pix_width_to_var(pix_width, var); var->xres = xres; var->yres = yres; var->xres_virtual = crtc->vxres; var->yres_virtual = crtc->vyres; var->xoffset = crtc->xoffset; var->yoffset = crtc->yoffset; var->left_margin = left; var->right_margin = right; var->upper_margin = upper; var->lower_margin = lower; var->hsync_len = hslen; var->vsync_len = vslen; var->sync = sync; var->vmode = FB_VMODE_NONINTERLACED; return 0; } static void aty128_set_crt_enable(struct aty128fb_par *par, int on) { if (on) { aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | CRT_CRTC_ON); aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | DAC_PALETTE2_SNOOP_EN)); } else aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & ~CRT_CRTC_ON); } static void aty128_set_lcd_enable(struct aty128fb_par *par, int on) { u32 reg; #ifdef CONFIG_FB_ATY128_BACKLIGHT struct fb_info *info = pci_get_drvdata(par->pdev); #endif if (on) { reg = aty_ld_le32(LVDS_GEN_CNTL); reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION; reg &= ~LVDS_DISPLAY_DIS; aty_st_le32(LVDS_GEN_CNTL, reg); #ifdef CONFIG_FB_ATY128_BACKLIGHT aty128_bl_set_power(info, FB_BLANK_UNBLANK); #endif } else { #ifdef CONFIG_FB_ATY128_BACKLIGHT aty128_bl_set_power(info, FB_BLANK_POWERDOWN); #endif reg = aty_ld_le32(LVDS_GEN_CNTL); reg |= LVDS_DISPLAY_DIS; aty_st_le32(LVDS_GEN_CNTL, reg); mdelay(100); reg &= ~(LVDS_ON /*| LVDS_EN*/); aty_st_le32(LVDS_GEN_CNTL, reg); } } static void aty128_set_pll(struct aty128_pll *pll, const struct aty128fb_par *par) { u32 div3; /* register values for post dividers */ static const unsigned char post_conv[] = { 2, 0, 1, 4, 2, 2, 6, 2, 3, 2, 2, 2, 7 }; /* select PPLL_DIV_3 */ aty_st_le32(CLOCK_CNTL_INDEX, aty_ld_le32(CLOCK_CNTL_INDEX) | (3 << 8)); /* reset PLL */ aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) | PPLL_RESET | PPLL_ATOMIC_UPDATE_EN); /* write the reference divider */ aty_pll_wait_readupdate(par); aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider & 0x3ff); aty_pll_writeupdate(par); div3 = aty_ld_pll(PPLL_DIV_3); div3 &= ~PPLL_FB3_DIV_MASK; div3 |= pll->feedback_divider; div3 &= ~PPLL_POST3_DIV_MASK; div3 |= post_conv[pll->post_divider] << 16; /* write feedback and post dividers */ aty_pll_wait_readupdate(par); aty_st_pll(PPLL_DIV_3, div3); aty_pll_writeupdate(par); aty_pll_wait_readupdate(par); aty_st_pll(HTOTAL_CNTL, 0); /* no horiz crtc adjustment */ aty_pll_writeupdate(par); /* clear the reset, just in case */ aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~PPLL_RESET); } static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll, const struct aty128fb_par *par) { const struct aty128_constants c = par->constants; static const unsigned char post_dividers[] = { 1, 2, 4, 8, 3, 6, 12 }; u32 output_freq; u32 vclk; /* in .01 MHz */ int i = 0; u32 n, d; vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */ /* adjust pixel clock if necessary */ if (vclk > c.ppll_max) vclk = c.ppll_max; if (vclk * 12 < c.ppll_min) vclk = c.ppll_min/12; /* now, find an acceptable divider */ for (i = 0; i < ARRAY_SIZE(post_dividers); i++) { output_freq = post_dividers[i] * vclk; if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) { pll->post_divider = post_dividers[i]; break; } } if (i == ARRAY_SIZE(post_dividers)) return -EINVAL; /* calculate feedback divider */ n = c.ref_divider * output_freq; d = c.ref_clk; pll->feedback_divider = round_div(n, d); pll->vclk = vclk; DBG("post %d feedback %d vlck %d output %d ref_divider %d " "vclk_per: %d\n", pll->post_divider, pll->feedback_divider, vclk, output_freq, c.ref_divider, period_in_ps); return 0; } static int aty128_pll_to_var(const struct aty128_pll *pll, struct fb_var_screeninfo *var) { var->pixclock = 100000000 / pll->vclk; return 0; } static void aty128_set_fifo(const struct aty128_ddafifo *dsp, const struct aty128fb_par *par) { aty_st_le32(DDA_CONFIG, dsp->dda_config); aty_st_le32(DDA_ON_OFF, dsp->dda_on_off); } static int aty128_ddafifo(struct aty128_ddafifo *dsp, const struct aty128_pll *pll, u32 depth, const struct aty128fb_par *par) { const struct aty128_meminfo *m = par->mem; u32 xclk = par->constants.xclk; u32 fifo_width = par->constants.fifo_width; u32 fifo_depth = par->constants.fifo_depth; s32 x, b, p, ron, roff; u32 n, d, bpp; /* round up to multiple of 8 */ bpp = (depth+7) & ~7; n = xclk * fifo_width; d = pll->vclk * bpp; x = round_div(n, d); ron = 4 * m->MB + 3 * ((m->Trcd - 2 > 0) ? m->Trcd - 2 : 0) + 2 * m->Trp + m->Twr + m->CL + m->Tr2w + x; DBG("x %x\n", x); b = 0; while (x) { x >>= 1; b++; } p = b + 1; ron <<= (11 - p); n <<= (11 - p); x = round_div(n, d); roff = x * (fifo_depth - 4); if ((ron + m->Rloop) >= roff) { printk(KERN_ERR "aty128fb: Mode out of range!\n"); return -EINVAL; } DBG("p: %x rloop: %x x: %x ron: %x roff: %x\n", p, m->Rloop, x, ron, roff); dsp->dda_config = p << 16 | m->Rloop << 20 | x; dsp->dda_on_off = ron << 16 | roff; return 0; } /* * This actually sets the video mode. */ static int aty128fb_set_par(struct fb_info *info) { struct aty128fb_par *par = info->par; u32 config; int err; if ((err = aty128_decode_var(&info->var, par)) != 0) return err; if (par->blitter_may_be_busy) wait_for_idle(par); /* clear all registers that may interfere with mode setting */ aty_st_le32(OVR_CLR, 0); aty_st_le32(OVR_WID_LEFT_RIGHT, 0); aty_st_le32(OVR_WID_TOP_BOTTOM, 0); aty_st_le32(OV0_SCALE_CNTL, 0); aty_st_le32(MPP_TB_CONFIG, 0); aty_st_le32(MPP_GP_CONFIG, 0); aty_st_le32(SUBPIC_CNTL, 0); aty_st_le32(VIPH_CONTROL, 0); aty_st_le32(I2C_CNTL_1, 0); /* turn off i2c */ aty_st_le32(GEN_INT_CNTL, 0); /* turn off interrupts */ aty_st_le32(CAP0_TRIG_CNTL, 0); aty_st_le32(CAP1_TRIG_CNTL, 0); aty_st_8(CRTC_EXT_CNTL + 1, 4); /* turn video off */ aty128_set_crtc(&par->crtc, par); aty128_set_pll(&par->pll, par); aty128_set_fifo(&par->fifo_reg, par); config = aty_ld_le32(CNFG_CNTL) & ~3; #if defined(__BIG_ENDIAN) if (par->crtc.bpp == 32) config |= 2; /* make aperture do 32 bit swapping */ else if (par->crtc.bpp == 16) config |= 1; /* make aperture do 16 bit swapping */ #endif aty_st_le32(CNFG_CNTL, config); aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */ info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3; info->fix.visual = par->crtc.bpp == 8 ? FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR; if (par->chip_gen == rage_M3) { aty128_set_crt_enable(par, par->crt_on); aty128_set_lcd_enable(par, par->lcd_on); } if (par->accel_flags & FB_ACCELF_TEXT) aty128_init_engine(par); #ifdef CONFIG_BOOTX_TEXT btext_update_display(info->fix.smem_start, (((par->crtc.h_total>>16) & 0xff)+1)*8, ((par->crtc.v_total>>16) & 0x7ff)+1, par->crtc.bpp, par->crtc.vxres*par->crtc.bpp/8); #endif /* CONFIG_BOOTX_TEXT */ return 0; } /* * encode/decode the User Defined Part of the Display */ static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par) { int err; struct aty128_crtc crtc; struct aty128_pll pll; struct aty128_ddafifo fifo_reg; if ((err = aty128_var_to_crtc(var, &crtc, par))) return err; if ((err = aty128_var_to_pll(var->pixclock, &pll, par))) return err; if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par))) return err; par->crtc = crtc; par->pll = pll; par->fifo_reg = fifo_reg; par->accel_flags = var->accel_flags; return 0; } static int aty128_encode_var(struct fb_var_screeninfo *var, const struct aty128fb_par *par) { int err; if ((err = aty128_crtc_to_var(&par->crtc, var))) return err; if ((err = aty128_pll_to_var(&par->pll, var))) return err; var->nonstd = 0; var->activate = 0; var->height = -1; var->width = -1; var->accel_flags = par->accel_flags; return 0; } static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) { struct aty128fb_par par; int err; par = *(struct aty128fb_par *)info->par; if ((err = aty128_decode_var(var, &par)) != 0) return err; aty128_encode_var(var, &par); return 0; } /* * Pan or Wrap the Display */ static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fb) { struct aty128fb_par *par = fb->par; u32 xoffset, yoffset; u32 offset; u32 xres, yres; xres = (((par->crtc.h_total >> 16) & 0xff) + 1) << 3; yres = ((par->crtc.v_total >> 16) & 0x7ff) + 1; xoffset = (var->xoffset +7) & ~7; yoffset = var->yoffset; if (xoffset+xres > par->crtc.vxres || yoffset+yres > par->crtc.vyres) return -EINVAL; par->crtc.xoffset = xoffset; par->crtc.yoffset = yoffset; offset = ((yoffset * par->crtc.vxres + xoffset) * (par->crtc.bpp >> 3)) & ~7; if (par->crtc.bpp == 24) offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */ aty_st_le32(CRTC_OFFSET, offset); return 0; } /* * Helper function to store a single palette register */ static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue, struct aty128fb_par *par) { if (par->chip_gen == rage_M3) { aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & ~DAC_PALETTE_ACCESS_CNTL); } aty_st_8(PALETTE_INDEX, regno); aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue); } static int aty128fb_sync(struct fb_info *info) { struct aty128fb_par *par = info->par; if (par->blitter_may_be_busy) wait_for_idle(par); return 0; } #ifndef MODULE static int aty128fb_setup(char *options) { char *this_opt; if (!options || !*options) return 0; while ((this_opt = strsep(&options, ",")) != NULL) { if (!strncmp(this_opt, "lcd:", 4)) { default_lcd_on = simple_strtoul(this_opt+4, NULL, 0); continue; } else if (!strncmp(this_opt, "crt:", 4)) { default_crt_on = simple_strtoul(this_opt+4, NULL, 0); continue; } else if (!strncmp(this_opt, "backlight:", 10)) { #ifdef CONFIG_FB_ATY128_BACKLIGHT backlight = simple_strtoul(this_opt+10, NULL, 0); #endif continue; } if(!strncmp(this_opt, "nomtrr", 6)) { mtrr = false; continue; } #ifdef CONFIG_PPC_PMAC /* vmode and cmode deprecated */ if (!strncmp(this_opt, "vmode:", 6)) { unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0); if (vmode > 0 && vmode <= VMODE_MAX) default_vmode = vmode; continue; } else if (!strncmp(this_opt, "cmode:", 6)) { unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0); switch (cmode) { case 0: case 8: default_cmode = CMODE_8; break; case 15: case 16: default_cmode = CMODE_16; break; case 24: case 32: default_cmode = CMODE_32; break; } continue; } #endif /* CONFIG_PPC_PMAC */ mode_option = this_opt; } return 0; } #endif /* MODULE */ /* Backlight */ #ifdef CONFIG_FB_ATY128_BACKLIGHT #define MAX_LEVEL 0xFF static int aty128_bl_get_level_brightness(struct aty128fb_par *par, int level) { struct fb_info *info = pci_get_drvdata(par->pdev); int atylevel; /* Get and convert the value */ /* No locking of bl_curve since we read a single value */ atylevel = MAX_LEVEL - (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL); if (atylevel < 0) atylevel = 0; else if (atylevel > MAX_LEVEL) atylevel = MAX_LEVEL; return atylevel; } /* We turn off the LCD completely instead of just dimming the backlight. * This provides greater power saving and the display is useless without * backlight anyway */ #define BACKLIGHT_LVDS_OFF /* That one prevents proper CRT output with LCD off */ #undef BACKLIGHT_DAC_OFF static int aty128_bl_update_status(struct backlight_device *bd) { struct aty128fb_par *par = bl_get_data(bd); unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL); int level; if (!par->lcd_on) level = 0; else level = backlight_get_brightness(bd); reg |= LVDS_BL_MOD_EN | LVDS_BLON; if (level > 0) { reg |= LVDS_DIGION; if (!(reg & LVDS_ON)) { reg &= ~LVDS_BLON; aty_st_le32(LVDS_GEN_CNTL, reg); aty_ld_le32(LVDS_GEN_CNTL); mdelay(10); reg |= LVDS_BLON; aty_st_le32(LVDS_GEN_CNTL, reg); } reg &= ~LVDS_BL_MOD_LEVEL_MASK; reg |= (aty128_bl_get_level_brightness(par, level) << LVDS_BL_MOD_LEVEL_SHIFT); #ifdef BACKLIGHT_LVDS_OFF reg |= LVDS_ON | LVDS_EN; reg &= ~LVDS_DISPLAY_DIS; #endif aty_st_le32(LVDS_GEN_CNTL, reg); #ifdef BACKLIGHT_DAC_OFF aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN)); #endif } else { reg &= ~LVDS_BL_MOD_LEVEL_MASK; reg |= (aty128_bl_get_level_brightness(par, 0) << LVDS_BL_MOD_LEVEL_SHIFT); #ifdef BACKLIGHT_LVDS_OFF reg |= LVDS_DISPLAY_DIS; aty_st_le32(LVDS_GEN_CNTL, reg); aty_ld_le32(LVDS_GEN_CNTL); udelay(10); reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION); #endif aty_st_le32(LVDS_GEN_CNTL, reg); #ifdef BACKLIGHT_DAC_OFF aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN); #endif } return 0; } static const struct backlight_ops aty128_bl_data = { .update_status = aty128_bl_update_status, }; static void aty128_bl_set_power(struct fb_info *info, int power) { if (info->bl_dev) { info->bl_dev->props.power = power; backlight_update_status(info->bl_dev); } } static void aty128_bl_init(struct aty128fb_par *par) { struct backlight_properties props; struct fb_info *info = pci_get_drvdata(par->pdev); struct backlight_device *bd; char name[12]; /* Could be extended to Rage128Pro LVDS output too */ if (par->chip_gen != rage_M3) return; #ifdef CONFIG_PMAC_BACKLIGHT if (!pmac_has_backlight_type("ati")) return; #endif snprintf(name, sizeof(name), "aty128bl%d", info->node); memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.max_brightness = FB_BACKLIGHT_LEVELS - 1; bd = backlight_device_register(name, info->device, par, &aty128_bl_data, &props); if (IS_ERR(bd)) { info->bl_dev = NULL; printk(KERN_WARNING "aty128: Backlight registration failed\n"); goto error; } info->bl_dev = bd; fb_bl_default_curve(info, 0, 63 * FB_BACKLIGHT_MAX / MAX_LEVEL, 219 * FB_BACKLIGHT_MAX / MAX_LEVEL); bd->props.brightness = bd->props.max_brightness; bd->props.power = FB_BLANK_UNBLANK; backlight_update_status(bd); printk("aty128: Backlight initialized (%s)\n", name); return; error: return; } static void aty128_bl_exit(struct backlight_device *bd) { backlight_device_unregister(bd); printk("aty128: Backlight unloaded\n"); } #endif /* CONFIG_FB_ATY128_BACKLIGHT */ /* * Initialisation */ #ifdef CONFIG_PPC_PMAC__disabled static void aty128_early_resume(void *data) { struct aty128fb_par *par = data; if (!console_trylock()) return; pci_restore_state(par->pdev); aty128_do_resume(par->pdev); console_unlock(); } #endif /* CONFIG_PPC_PMAC */ static int aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent) { struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; struct fb_var_screeninfo var; char video_card[50]; u8 chip_rev; u32 dac; /* Get the chip revision */ chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F; strcpy(video_card, "Rage128 XX "); video_card[8] = ent->device >> 8; video_card[9] = ent->device & 0xFF; /* range check to make sure */ if (ent->driver_data < ARRAY_SIZE(r128_family)) strlcat(video_card, r128_family[ent->driver_data], sizeof(video_card)); printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev); if (par->vram_size % (1024 * 1024) == 0) printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name); else printk("%dk %s\n", par->vram_size / 1024, par->mem->name); par->chip_gen = ent->driver_data; /* fill in info */ info->fbops = &aty128fb_ops; par->lcd_on = default_lcd_on; par->crt_on = default_crt_on; var = default_var; #ifdef CONFIG_PPC_PMAC if (machine_is(powermac)) { /* Indicate sleep capability */ if (par->chip_gen == rage_M3) { pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1); #if 0 /* Disable the early video resume hack for now as it's causing problems, * among others we now rely on the PCI core restoring the config space * for us, which isn't the case with that hack, and that code path causes * various things to be called with interrupts off while they shouldn't. * I'm leaving the code in as it can be useful for debugging purposes */ pmac_set_early_video_resume(aty128_early_resume, par); #endif } /* Find default mode */ if (mode_option) { if (!mac_find_mode(&var, info, mode_option, 8)) var = default_var; } else { if (default_vmode <= 0 || default_vmode > VMODE_MAX) default_vmode = VMODE_1024_768_60; /* iMacs need that resolution * PowerMac2,1 first r128 iMacs * PowerMac2,2 summer 2000 iMacs * PowerMac4,1 january 2001 iMacs "flower power" */ if (of_machine_is_compatible("PowerMac2,1") || of_machine_is_compatible("PowerMac2,2") || of_machine_is_compatible("PowerMac4,1")) default_vmode = VMODE_1024_768_75; /* iBook SE */ if (of_machine_is_compatible("PowerBook2,2")) default_vmode = VMODE_800_600_60; /* PowerBook Firewire (Pismo), iBook Dual USB */ if (of_machine_is_compatible("PowerBook3,1") || of_machine_is_compatible("PowerBook4,1")) default_vmode = VMODE_1024_768_60; /* PowerBook Titanium */ if (of_machine_is_compatible("PowerBook3,2")) default_vmode = VMODE_1152_768_60; if (default_cmode > 16) default_cmode = CMODE_32; else if (default_cmode > 8) default_cmode = CMODE_16; else default_cmode = CMODE_8; if (mac_vmode_to_var(default_vmode, default_cmode, &var)) var = default_var; } } else #endif /* CONFIG_PPC_PMAC */ { if (mode_option) if (fb_find_mode(&var, info, mode_option, NULL, 0, &defaultmode, 8) == 0) var = default_var; } var.accel_flags &= ~FB_ACCELF_TEXT; // var.accel_flags |= FB_ACCELF_TEXT;/* FIXME Will add accel later */ if (aty128fb_check_var(&var, info)) { printk(KERN_ERR "aty128fb: Cannot set default mode.\n"); return 0; } /* setup the DAC the way we like it */ dac = aty_ld_le32(DAC_CNTL); dac |= (DAC_8BIT_EN | DAC_RANGE_CNTL); dac |= DAC_MASK; if (par->chip_gen == rage_M3) dac |= DAC_PALETTE2_SNOOP_EN; aty_st_le32(DAC_CNTL, dac); /* turn off bus mastering, just in case */ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL) | BUS_MASTER_DIS); info->var = var; fb_alloc_cmap(&info->cmap, 256, 0); var.activate = FB_ACTIVATE_NOW; aty128_init_engine(par); par->pdev = pdev; par->asleep = 0; par->lock_blank = 0; if (register_framebuffer(info) < 0) return 0; #ifdef CONFIG_FB_ATY128_BACKLIGHT if (backlight) aty128_bl_init(par); #endif fb_info(info, "%s frame buffer device on %s\n", info->fix.id, video_card); return 1; /* success! */ } #ifdef CONFIG_PCI /* register a card ++ajoshi */ static int aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { unsigned long fb_addr, reg_addr; struct aty128fb_par *par; struct fb_info *info; int err; #ifndef __sparc__ void __iomem *bios = NULL; #endif err = aperture_remove_conflicting_pci_devices(pdev, "aty128fb"); if (err) return err; /* Enable device in PCI config */ if ((err = pci_enable_device(pdev))) { printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n", err); return -ENODEV; } fb_addr = pci_resource_start(pdev, 0); if (!request_mem_region(fb_addr, pci_resource_len(pdev, 0), "aty128fb FB")) { printk(KERN_ERR "aty128fb: cannot reserve frame " "buffer memory\n"); return -ENODEV; } reg_addr = pci_resource_start(pdev, 2); if (!request_mem_region(reg_addr, pci_resource_len(pdev, 2), "aty128fb MMIO")) { printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n"); goto err_free_fb; } /* We have the resources. Now virtualize them */ info = framebuffer_alloc(sizeof(struct aty128fb_par), &pdev->dev); if (!info) goto err_free_mmio; par = info->par; info->pseudo_palette = par->pseudo_palette; /* Virtualize mmio region */ info->fix.mmio_start = reg_addr; par->regbase = pci_ioremap_bar(pdev, 2); if (!par->regbase) goto err_free_info; /* Grab memory size from the card */ // How does this relate to the resource length from the PCI hardware? par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF; /* Virtualize the framebuffer */ info->screen_base = ioremap_wc(fb_addr, par->vram_size); if (!info->screen_base) goto err_unmap_out; /* Set up info->fix */ info->fix = aty128fb_fix; info->fix.smem_start = fb_addr; info->fix.smem_len = par->vram_size; info->fix.mmio_start = reg_addr; /* If we can't test scratch registers, something is seriously wrong */ if (!register_test(par)) { printk(KERN_ERR "aty128fb: Can't write to video register!\n"); goto err_out; } #ifndef __sparc__ bios = aty128_map_ROM(par, pdev); #ifdef CONFIG_X86 if (bios == NULL) bios = aty128_find_mem_vbios(par); #endif if (bios == NULL) printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n"); else { printk(KERN_INFO "aty128fb: Rage128 BIOS located\n"); aty128_get_pllinfo(par, bios); pci_unmap_rom(pdev, bios); } #endif /* __sparc__ */ aty128_timings(par); pci_set_drvdata(pdev, info); if (!aty128_init(pdev, ent)) goto err_out; if (mtrr) par->wc_cookie = arch_phys_wc_add(info->fix.smem_start, par->vram_size); return 0; err_out: iounmap(info->screen_base); err_unmap_out: iounmap(par->regbase); err_free_info: framebuffer_release(info); err_free_mmio: release_mem_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); err_free_fb: release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); return -ENODEV; } static void aty128_remove(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par; if (!info) return; par = info->par; #ifdef CONFIG_FB_ATY128_BACKLIGHT aty128_bl_exit(info->bl_dev); #endif unregister_framebuffer(info); arch_phys_wc_del(par->wc_cookie); iounmap(par->regbase); iounmap(info->screen_base); release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0)); release_mem_region(pci_resource_start(pdev, 2), pci_resource_len(pdev, 2)); framebuffer_release(info); } #endif /* CONFIG_PCI */ /* * Blank the display. */ static int aty128fb_blank(int blank, struct fb_info *fb) { struct aty128fb_par *par = fb->par; u8 state; if (par->lock_blank || par->asleep) return 0; switch (blank) { case FB_BLANK_NORMAL: state = 4; break; case FB_BLANK_VSYNC_SUSPEND: state = 6; break; case FB_BLANK_HSYNC_SUSPEND: state = 5; break; case FB_BLANK_POWERDOWN: state = 7; break; case FB_BLANK_UNBLANK: default: state = 0; break; } aty_st_8(CRTC_EXT_CNTL+1, state); if (par->chip_gen == rage_M3) { aty128_set_crt_enable(par, par->crt_on && !blank); aty128_set_lcd_enable(par, par->lcd_on && !blank); } return 0; } /* * Set a single color register. The values supplied are already * rounded down to the hardware's capabilities (according to the * entries in the var structure). Return != 0 for invalid regno. */ static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, u_int transp, struct fb_info *info) { struct aty128fb_par *par = info->par; if (regno > 255 || (par->crtc.depth == 16 && regno > 63) || (par->crtc.depth == 15 && regno > 31)) return 1; red >>= 8; green >>= 8; blue >>= 8; if (regno < 16) { int i; u32 *pal = info->pseudo_palette; switch (par->crtc.depth) { case 15: pal[regno] = (regno << 10) | (regno << 5) | regno; break; case 16: pal[regno] = (regno << 11) | (regno << 6) | regno; break; case 24: pal[regno] = (regno << 16) | (regno << 8) | regno; break; case 32: i = (regno << 8) | regno; pal[regno] = (i << 16) | i; break; } } if (par->crtc.depth == 16 && regno > 0) { /* * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we * have 32 slots for R and B values but 64 slots for G values. * Thus the R and B values go in one slot but the G value * goes in a different slot, and we have to avoid disturbing * the other fields in the slots we touch. */ par->green[regno] = green; if (regno < 32) { par->red[regno] = red; par->blue[regno] = blue; aty128_st_pal(regno * 8, red, par->green[regno*2], blue, par); } red = par->red[regno/2]; blue = par->blue[regno/2]; regno <<= 2; } else if (par->crtc.bpp == 16) regno <<= 3; aty128_st_pal(regno, red, green, blue, par); return 0; } #define ATY_MIRROR_LCD_ON 0x00000001 #define ATY_MIRROR_CRT_ON 0x00000002 /* out param: u32* backlight value: 0 to 15 */ #define FBIO_ATY128_GET_MIRROR _IOR('@', 1, __u32) /* in param: u32* backlight value: 0 to 15 */ #define FBIO_ATY128_SET_MIRROR _IOW('@', 2, __u32) static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg) { struct aty128fb_par *par = info->par; u32 value; int rc; switch (cmd) { case FBIO_ATY128_SET_MIRROR: if (par->chip_gen != rage_M3) return -EINVAL; rc = get_user(value, (__u32 __user *)arg); if (rc) return rc; par->lcd_on = (value & 0x01) != 0; par->crt_on = (value & 0x02) != 0; if (!par->crt_on && !par->lcd_on) par->lcd_on = 1; aty128_set_crt_enable(par, par->crt_on); aty128_set_lcd_enable(par, par->lcd_on); return 0; case FBIO_ATY128_GET_MIRROR: if (par->chip_gen != rage_M3) return -EINVAL; value = (par->crt_on << 1) | par->lcd_on; return put_user(value, (__u32 __user *)arg); } return -EINVAL; } static void aty128_set_suspend(struct aty128fb_par *par, int suspend) { u32 pmgt; if (!par->pdev->pm_cap) return; /* Set the chip into the appropriate suspend mode (we use D2, * D3 would require a complete re-initialisation of the chip, * including PCI config registers, clocks, AGP configuration, ...) * * For resume, the core will have already brought us back to D0 */ if (suspend) { /* Make sure CRTC2 is reset. Remove that the day we decide to * actually use CRTC2 and replace it with real code for disabling * the CRTC2 output during sleep */ aty_st_le32(CRTC2_GEN_CNTL, aty_ld_le32(CRTC2_GEN_CNTL) & ~(CRTC2_EN)); /* Set the power management mode to be PCI based */ /* Use this magic value for now */ pmgt = 0x0c005407; aty_st_pll(POWER_MANAGEMENT, pmgt); (void)aty_ld_pll(POWER_MANAGEMENT); aty_st_le32(BUS_CNTL1, 0x00000010); aty_st_le32(MEM_POWER_MISC, 0x0c830000); msleep(100); } } static int aty128_pci_suspend_late(struct device *dev, pm_message_t state) { struct pci_dev *pdev = to_pci_dev(dev); struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; /* We don't do anything but D2, for now we return 0, but * we may want to change that. How do we know if the BIOS * can properly take care of D3 ? Also, with swsusp, we * know we'll be rebooted, ... */ #ifndef CONFIG_PPC_PMAC /* HACK ALERT ! Once I find a proper way to say to each driver * individually what will happen with it's PCI slot, I'll change * that. On laptops, the AGP slot is just unclocked, so D2 is * expected, while on desktops, the card is powered off */ return 0; #endif /* CONFIG_PPC_PMAC */ if (state.event == pdev->dev.power.power_state.event) return 0; printk(KERN_DEBUG "aty128fb: suspending...\n"); console_lock(); fb_set_suspend(info, 1); /* Make sure engine is reset */ wait_for_idle(par); aty128_reset_engine(par); wait_for_idle(par); /* Blank display and LCD */ aty128fb_blank(FB_BLANK_POWERDOWN, info); /* Sleep */ par->asleep = 1; par->lock_blank = 1; #ifdef CONFIG_PPC_PMAC /* On powermac, we have hooks to properly suspend/resume AGP now, * use them here. We'll ultimately need some generic support here, * but the generic code isn't quite ready for that yet */ pmac_suspend_agp_for_card(pdev); #endif /* CONFIG_PPC_PMAC */ /* We need a way to make sure the fbdev layer will _not_ touch the * framebuffer before we put the chip to suspend state. On 2.4, I * used dummy fb ops, 2.5 need proper support for this at the * fbdev level */ if (state.event != PM_EVENT_ON) aty128_set_suspend(par, 1); console_unlock(); pdev->dev.power.power_state = state; return 0; } static int __maybe_unused aty128_pci_suspend(struct device *dev) { return aty128_pci_suspend_late(dev, PMSG_SUSPEND); } static int __maybe_unused aty128_pci_hibernate(struct device *dev) { return aty128_pci_suspend_late(dev, PMSG_HIBERNATE); } static int __maybe_unused aty128_pci_freeze(struct device *dev) { return aty128_pci_suspend_late(dev, PMSG_FREEZE); } static int aty128_do_resume(struct pci_dev *pdev) { struct fb_info *info = pci_get_drvdata(pdev); struct aty128fb_par *par = info->par; if (pdev->dev.power.power_state.event == PM_EVENT_ON) return 0; /* PCI state will have been restored by the core, so * we should be in D0 now with our config space fully * restored */ /* Wakeup chip */ aty128_set_suspend(par, 0); par->asleep = 0; /* Restore display & engine */ aty128_reset_engine(par); wait_for_idle(par); aty128fb_set_par(info); fb_pan_display(info, &info->var); fb_set_cmap(&info->cmap, info); /* Refresh */ fb_set_suspend(info, 0); /* Unblank */ par->lock_blank = 0; aty128fb_blank(0, info); #ifdef CONFIG_PPC_PMAC /* On powermac, we have hooks to properly suspend/resume AGP now, * use them here. We'll ultimately need some generic support here, * but the generic code isn't quite ready for that yet */ pmac_resume_agp_for_card(pdev); #endif /* CONFIG_PPC_PMAC */ pdev->dev.power.power_state = PMSG_ON; printk(KERN_DEBUG "aty128fb: resumed !\n"); return 0; } static int __maybe_unused aty128_pci_resume(struct device *dev) { int rc; console_lock(); rc = aty128_do_resume(to_pci_dev(dev)); console_unlock(); return rc; } static int aty128fb_init(void) { #ifndef MODULE char *option = NULL; #endif if (fb_modesetting_disabled("aty128fb")) return -ENODEV; #ifndef MODULE if (fb_get_options("aty128fb", &option)) return -ENODEV; aty128fb_setup(option); #endif return pci_register_driver(&aty128fb_driver); } static void __exit aty128fb_exit(void) { pci_unregister_driver(&aty128fb_driver); } module_init(aty128fb_init); module_exit(aty128fb_exit); MODULE_AUTHOR("(c)1999-2003 Brad Douglas <brad@neruo.com>"); MODULE_DESCRIPTION("FBDev driver for ATI Rage128 / Pro cards"); MODULE_LICENSE("GPL"); module_param(mode_option, charp, 0); MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" "); module_param_named(nomtrr, mtrr, invbool, 0); MODULE_PARM_DESC(nomtrr, "bool: Disable MTRR support (0 or 1=disabled) (default=0)");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1