Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Mariusz Białończyk | 2093 | 89.29% | 1 | 9.09% |
Luiz Sampaio | 151 | 6.44% | 4 | 36.36% |
Julien Folly | 84 | 3.58% | 1 | 9.09% |
Greg Kroah-Hartman | 8 | 0.34% | 1 | 9.09% |
Colin Ian King | 4 | 0.17% | 1 | 9.09% |
Thomas Gleixner | 2 | 0.09% | 1 | 9.09% |
Rikard Falkeborn | 1 | 0.04% | 1 | 9.09% |
Andrew F. Davis | 1 | 0.04% | 1 | 9.09% |
Total | 2344 | 11 |
// SPDX-License-Identifier: GPL-2.0-only /* * 1-Wire implementation for the ds2438 chip * * Copyright (c) 2017 Mariusz Bialonczyk <manio@skyboo.net> */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/device.h> #include <linux/types.h> #include <linux/delay.h> #include <linux/w1.h> #define W1_FAMILY_DS2438 0x26 #define W1_DS2438_RETRIES 3 /* Memory commands */ #define W1_DS2438_READ_SCRATCH 0xBE #define W1_DS2438_WRITE_SCRATCH 0x4E #define W1_DS2438_COPY_SCRATCH 0x48 #define W1_DS2438_RECALL_MEMORY 0xB8 /* Register commands */ #define W1_DS2438_CONVERT_TEMP 0x44 #define W1_DS2438_CONVERT_VOLTAGE 0xB4 #define DS2438_PAGE_SIZE 8 #define DS2438_ADC_INPUT_VAD 0 #define DS2438_ADC_INPUT_VDD 1 #define DS2438_MAX_CONVERSION_TIME 10 /* ms */ /* Page #0 definitions */ #define DS2438_STATUS_REG 0x00 /* Status/Configuration Register */ #define DS2438_STATUS_IAD (1 << 0) /* Current A/D Control Bit */ #define DS2438_STATUS_CA (1 << 1) /* Current Accumulator Configuration */ #define DS2438_STATUS_EE (1 << 2) /* Current Accumulator Shadow Selector bit */ #define DS2438_STATUS_AD (1 << 3) /* Voltage A/D Input Select Bit */ #define DS2438_STATUS_TB (1 << 4) /* Temperature Busy Flag */ #define DS2438_STATUS_NVB (1 << 5) /* Nonvolatile Memory Busy Flag */ #define DS2438_STATUS_ADB (1 << 6) /* A/D Converter Busy Flag */ #define DS2438_TEMP_LSB 0x01 #define DS2438_TEMP_MSB 0x02 #define DS2438_VOLTAGE_LSB 0x03 #define DS2438_VOLTAGE_MSB 0x04 #define DS2438_CURRENT_LSB 0x05 #define DS2438_CURRENT_MSB 0x06 #define DS2438_THRESHOLD 0x07 /* Page #1 definitions */ #define DS2438_ETM_0 0x00 #define DS2438_ETM_1 0x01 #define DS2438_ETM_2 0x02 #define DS2438_ETM_3 0x03 #define DS2438_ICA 0x04 #define DS2438_OFFSET_LSB 0x05 #define DS2438_OFFSET_MSB 0x06 static int w1_ds2438_get_page(struct w1_slave *sl, int pageno, u8 *buf) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[2]; u8 crc; size_t count; while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_RECALL_MEMORY; w1_buf[1] = (u8)pageno; w1_write_block(sl->master, w1_buf, 2); if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_READ_SCRATCH; w1_buf[1] = (u8)pageno; w1_write_block(sl->master, w1_buf, 2); count = w1_read_block(sl->master, buf, DS2438_PAGE_SIZE + 1); if (count == DS2438_PAGE_SIZE + 1) { crc = w1_calc_crc8(buf, DS2438_PAGE_SIZE); /* check for correct CRC */ if ((u8)buf[DS2438_PAGE_SIZE] == crc) return 0; } } return -1; } static int w1_ds2438_get_temperature(struct w1_slave *sl, int16_t *temperature) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; unsigned int tm = DS2438_MAX_CONVERSION_TIME; unsigned long sleep_rem; int ret; mutex_lock(&sl->master->bus_mutex); while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_write_8(sl->master, W1_DS2438_CONVERT_TEMP); mutex_unlock(&sl->master->bus_mutex); sleep_rem = msleep_interruptible(tm); if (sleep_rem != 0) { ret = -1; goto post_unlock; } if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { ret = -1; goto post_unlock; } break; } if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { *temperature = (((int16_t) w1_buf[DS2438_TEMP_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_TEMP_LSB]); ret = 0; } else ret = -1; mutex_unlock(&sl->master->bus_mutex); post_unlock: return ret; } static int w1_ds2438_change_config_bit(struct w1_slave *sl, u8 mask, u8 value) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[3]; u8 status; int perform_write = 0; while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_RECALL_MEMORY; w1_buf[1] = 0x00; w1_write_block(sl->master, w1_buf, 2); if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_READ_SCRATCH; w1_buf[1] = 0x00; w1_write_block(sl->master, w1_buf, 2); /* reading one byte of result */ status = w1_read_8(sl->master); /* if bit0=1, set a value to a mask for easy compare */ if (value) value = mask; if ((status & mask) == value) return 0; /* already set as requested */ /* changing bit */ status ^= mask; perform_write = 1; break; } if (perform_write) { retries = W1_DS2438_RETRIES; while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_WRITE_SCRATCH; w1_buf[1] = 0x00; w1_buf[2] = status; w1_write_block(sl->master, w1_buf, 3); if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_COPY_SCRATCH; w1_buf[1] = 0x00; w1_write_block(sl->master, w1_buf, 2); return 0; } } return -1; } static int w1_ds2438_change_offset_register(struct w1_slave *sl, u8 *value) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[9]; u8 w1_page1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; if (w1_ds2438_get_page(sl, 1, w1_page1_buf) == 0) { memcpy(&w1_buf[2], w1_page1_buf, DS2438_PAGE_SIZE - 1); /* last register reserved */ w1_buf[7] = value[0]; /* change only offset register */ w1_buf[8] = value[1]; while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_WRITE_SCRATCH; w1_buf[1] = 0x01; /* write to page 1 */ w1_write_block(sl->master, w1_buf, 9); if (w1_reset_select_slave(sl)) continue; w1_buf[0] = W1_DS2438_COPY_SCRATCH; w1_buf[1] = 0x01; w1_write_block(sl->master, w1_buf, 2); return 0; } } return -1; } static int w1_ds2438_get_voltage(struct w1_slave *sl, int adc_input, uint16_t *voltage) { unsigned int retries = W1_DS2438_RETRIES; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; unsigned int tm = DS2438_MAX_CONVERSION_TIME; unsigned long sleep_rem; int ret; mutex_lock(&sl->master->bus_mutex); if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_AD, adc_input)) { ret = -1; goto pre_unlock; } while (retries--) { if (w1_reset_select_slave(sl)) continue; w1_write_8(sl->master, W1_DS2438_CONVERT_VOLTAGE); mutex_unlock(&sl->master->bus_mutex); sleep_rem = msleep_interruptible(tm); if (sleep_rem != 0) { ret = -1; goto post_unlock; } if (mutex_lock_interruptible(&sl->master->bus_mutex) != 0) { ret = -1; goto post_unlock; } break; } if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { *voltage = (((uint16_t) w1_buf[DS2438_VOLTAGE_MSB]) << 8) | ((uint16_t) w1_buf[DS2438_VOLTAGE_LSB]); ret = 0; } else ret = -1; pre_unlock: mutex_unlock(&sl->master->bus_mutex); post_unlock: return ret; } static int w1_ds2438_get_current(struct w1_slave *sl, int16_t *voltage) { u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; int ret; mutex_lock(&sl->master->bus_mutex); if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { /* The voltage measured across current sense resistor RSENS. */ *voltage = (((int16_t) w1_buf[DS2438_CURRENT_MSB]) << 8) | ((int16_t) w1_buf[DS2438_CURRENT_LSB]); ret = 0; } else ret = -1; mutex_unlock(&sl->master->bus_mutex); return ret; } static ssize_t iad_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; if (count != 1 || off != 0) return -EFAULT; mutex_lock(&sl->master->bus_mutex); if (w1_ds2438_change_config_bit(sl, DS2438_STATUS_IAD, *buf & 0x01) == 0) ret = 1; else ret = -EIO; mutex_unlock(&sl->master->bus_mutex); return ret; } static ssize_t iad_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; int16_t voltage; if (off != 0) return 0; if (!buf) return -EINVAL; if (w1_ds2438_get_current(sl, &voltage) == 0) ret = snprintf(buf, count, "%i\n", voltage); else ret = -EIO; return ret; } static ssize_t page0_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; if (off != 0) return 0; if (!buf) return -EINVAL; mutex_lock(&sl->master->bus_mutex); /* Read no more than page0 size */ if (count > DS2438_PAGE_SIZE) count = DS2438_PAGE_SIZE; if (w1_ds2438_get_page(sl, 0, w1_buf) == 0) { memcpy(buf, &w1_buf, count); ret = count; } else ret = -EIO; mutex_unlock(&sl->master->bus_mutex); return ret; } static ssize_t page1_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; u8 w1_buf[DS2438_PAGE_SIZE + 1 /*for CRC*/]; if (off != 0) return 0; if (!buf) return -EINVAL; mutex_lock(&sl->master->bus_mutex); /* Read no more than page1 size */ if (count > DS2438_PAGE_SIZE) count = DS2438_PAGE_SIZE; if (w1_ds2438_get_page(sl, 1, w1_buf) == 0) { memcpy(buf, &w1_buf, count); ret = count; } else ret = -EIO; mutex_unlock(&sl->master->bus_mutex); return ret; } static ssize_t offset_write(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; mutex_lock(&sl->master->bus_mutex); if (w1_ds2438_change_offset_register(sl, buf) == 0) ret = count; else ret = -EIO; mutex_unlock(&sl->master->bus_mutex); return ret; } static ssize_t temperature_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; int16_t temp; if (off != 0) return 0; if (!buf) return -EINVAL; if (w1_ds2438_get_temperature(sl, &temp) == 0) ret = snprintf(buf, count, "%i\n", temp); else ret = -EIO; return ret; } static ssize_t vad_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; uint16_t voltage; if (off != 0) return 0; if (!buf) return -EINVAL; if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VAD, &voltage) == 0) ret = snprintf(buf, count, "%u\n", voltage); else ret = -EIO; return ret; } static ssize_t vdd_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { struct w1_slave *sl = kobj_to_w1_slave(kobj); int ret; uint16_t voltage; if (off != 0) return 0; if (!buf) return -EINVAL; if (w1_ds2438_get_voltage(sl, DS2438_ADC_INPUT_VDD, &voltage) == 0) ret = snprintf(buf, count, "%u\n", voltage); else ret = -EIO; return ret; } static BIN_ATTR_RW(iad, 0); static BIN_ATTR_RO(page0, DS2438_PAGE_SIZE); static BIN_ATTR_RO(page1, DS2438_PAGE_SIZE); static BIN_ATTR_WO(offset, 2); static BIN_ATTR_RO(temperature, 0/* real length varies */); static BIN_ATTR_RO(vad, 0/* real length varies */); static BIN_ATTR_RO(vdd, 0/* real length varies */); static struct bin_attribute *w1_ds2438_bin_attrs[] = { &bin_attr_iad, &bin_attr_page0, &bin_attr_page1, &bin_attr_offset, &bin_attr_temperature, &bin_attr_vad, &bin_attr_vdd, NULL, }; static const struct attribute_group w1_ds2438_group = { .bin_attrs = w1_ds2438_bin_attrs, }; static const struct attribute_group *w1_ds2438_groups[] = { &w1_ds2438_group, NULL, }; static const struct w1_family_ops w1_ds2438_fops = { .groups = w1_ds2438_groups, }; static struct w1_family w1_ds2438_family = { .fid = W1_FAMILY_DS2438, .fops = &w1_ds2438_fops, }; module_w1_family(w1_ds2438_family); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>"); MODULE_DESCRIPTION("1-wire driver for Maxim/Dallas DS2438 Smart Battery Monitor"); MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2438));
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1