| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Darrick J. Wong | 866 | 33.50% | 24 | 28.57% |
| Christoph Hellwig | 711 | 27.50% | 15 | 17.86% |
| David Chinner | 558 | 21.59% | 25 | 29.76% |
| Timothy Shimmin | 186 | 7.20% | 3 | 3.57% |
| Allison Henderson | 94 | 3.64% | 2 | 2.38% |
| Nathan Scott | 70 | 2.71% | 4 | 4.76% |
| Chandan Babu R | 45 | 1.74% | 2 | 2.38% |
| Chandra Seetharaman | 26 | 1.01% | 1 | 1.19% |
| Jie Liu | 11 | 0.43% | 2 | 2.38% |
| Barry Naujok | 7 | 0.27% | 1 | 1.19% |
| Arkadiusz Miskiewicz | 5 | 0.19% | 1 | 1.19% |
| Eric Sandeen | 2 | 0.08% | 1 | 1.19% |
| Russell Cattelan | 2 | 0.08% | 1 | 1.19% |
| Joe Perches | 1 | 0.04% | 1 | 1.19% |
| Stephen Lord | 1 | 0.04% | 1 | 1.19% |
| Total | 2585 | 84 |
// SPDX-License-Identifier: GPL-2.0 /* * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc. * All Rights Reserved. */ #ifndef __XFS_LOG_FORMAT_H__ #define __XFS_LOG_FORMAT_H__ struct xfs_mount; struct xfs_trans_res; /* * On-disk Log Format definitions. * * This file contains all the on-disk format definitions used within the log. It * includes the physical log structure itself, as well as all the log item * format structures that are written into the log and intepreted by log * recovery. We start with the physical log format definitions, and then work * through all the log items definitions and everything they encode into the * log. */ typedef uint32_t xlog_tid_t; #define XLOG_MIN_ICLOGS 2 #define XLOG_MAX_ICLOGS 8 #define XLOG_HEADER_MAGIC_NUM 0xFEEDbabe /* Invalid cycle number */ #define XLOG_VERSION_1 1 #define XLOG_VERSION_2 2 /* Large IClogs, Log sunit */ #define XLOG_VERSION_OKBITS (XLOG_VERSION_1 | XLOG_VERSION_2) #define XLOG_MIN_RECORD_BSIZE (16*1024) /* eventually 32k */ #define XLOG_BIG_RECORD_BSIZE (32*1024) /* 32k buffers */ #define XLOG_MAX_RECORD_BSIZE (256*1024) #define XLOG_HEADER_CYCLE_SIZE (32*1024) /* cycle data in header */ #define XLOG_MIN_RECORD_BSHIFT 14 /* 16384 == 1 << 14 */ #define XLOG_BIG_RECORD_BSHIFT 15 /* 32k == 1 << 15 */ #define XLOG_MAX_RECORD_BSHIFT 18 /* 256k == 1 << 18 */ #define XLOG_HEADER_SIZE 512 /* Minimum number of transactions that must fit in the log (defined by mkfs) */ #define XFS_MIN_LOG_FACTOR 3 #define XLOG_REC_SHIFT(log) \ BTOBB(1 << (xfs_has_logv2(log->l_mp) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) #define XLOG_TOTAL_REC_SHIFT(log) \ BTOBB(XLOG_MAX_ICLOGS << (xfs_has_logv2(log->l_mp) ? \ XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) /* get lsn fields */ #define CYCLE_LSN(lsn) ((uint)((lsn)>>32)) #define BLOCK_LSN(lsn) ((uint)(lsn)) /* this is used in a spot where we might otherwise double-endian-flip */ #define CYCLE_LSN_DISK(lsn) (((__be32 *)&(lsn))[0]) static inline xfs_lsn_t xlog_assign_lsn(uint cycle, uint block) { return ((xfs_lsn_t)cycle << 32) | block; } static inline uint xlog_get_cycle(char *ptr) { if (be32_to_cpu(*(__be32 *)ptr) == XLOG_HEADER_MAGIC_NUM) return be32_to_cpu(*((__be32 *)ptr + 1)); else return be32_to_cpu(*(__be32 *)ptr); } /* Log Clients */ #define XFS_TRANSACTION 0x69 #define XFS_LOG 0xaa #define XLOG_UNMOUNT_TYPE 0x556e /* Un for Unmount */ /* * Log item for unmount records. * * The unmount record used to have a string "Unmount filesystem--" in the * data section where the "Un" was really a magic number (XLOG_UNMOUNT_TYPE). * We just write the magic number now; see xfs_log_unmount_write. */ struct xfs_unmount_log_format { uint16_t magic; /* XLOG_UNMOUNT_TYPE */ uint16_t pad1; uint32_t pad2; /* may as well make it 64 bits */ }; /* Region types for iovec's i_type */ #define XLOG_REG_TYPE_BFORMAT 1 #define XLOG_REG_TYPE_BCHUNK 2 #define XLOG_REG_TYPE_EFI_FORMAT 3 #define XLOG_REG_TYPE_EFD_FORMAT 4 #define XLOG_REG_TYPE_IFORMAT 5 #define XLOG_REG_TYPE_ICORE 6 #define XLOG_REG_TYPE_IEXT 7 #define XLOG_REG_TYPE_IBROOT 8 #define XLOG_REG_TYPE_ILOCAL 9 #define XLOG_REG_TYPE_IATTR_EXT 10 #define XLOG_REG_TYPE_IATTR_BROOT 11 #define XLOG_REG_TYPE_IATTR_LOCAL 12 #define XLOG_REG_TYPE_QFORMAT 13 #define XLOG_REG_TYPE_DQUOT 14 #define XLOG_REG_TYPE_QUOTAOFF 15 #define XLOG_REG_TYPE_LRHEADER 16 #define XLOG_REG_TYPE_UNMOUNT 17 #define XLOG_REG_TYPE_COMMIT 18 #define XLOG_REG_TYPE_TRANSHDR 19 #define XLOG_REG_TYPE_ICREATE 20 #define XLOG_REG_TYPE_RUI_FORMAT 21 #define XLOG_REG_TYPE_RUD_FORMAT 22 #define XLOG_REG_TYPE_CUI_FORMAT 23 #define XLOG_REG_TYPE_CUD_FORMAT 24 #define XLOG_REG_TYPE_BUI_FORMAT 25 #define XLOG_REG_TYPE_BUD_FORMAT 26 #define XLOG_REG_TYPE_ATTRI_FORMAT 27 #define XLOG_REG_TYPE_ATTRD_FORMAT 28 #define XLOG_REG_TYPE_ATTR_NAME 29 #define XLOG_REG_TYPE_ATTR_VALUE 30 #define XLOG_REG_TYPE_XMI_FORMAT 31 #define XLOG_REG_TYPE_XMD_FORMAT 32 #define XLOG_REG_TYPE_ATTR_NEWNAME 33 #define XLOG_REG_TYPE_ATTR_NEWVALUE 34 #define XLOG_REG_TYPE_MAX 34 /* * Flags to log operation header * * The first write of a new transaction will be preceded with a start * record, XLOG_START_TRANS. Once a transaction is committed, a commit * record is written, XLOG_COMMIT_TRANS. If a single region can not fit into * the remainder of the current active in-core log, it is split up into * multiple regions. Each partial region will be marked with a * XLOG_CONTINUE_TRANS until the last one, which gets marked with XLOG_END_TRANS. * */ #define XLOG_START_TRANS 0x01 /* Start a new transaction */ #define XLOG_COMMIT_TRANS 0x02 /* Commit this transaction */ #define XLOG_CONTINUE_TRANS 0x04 /* Cont this trans into new region */ #define XLOG_WAS_CONT_TRANS 0x08 /* Cont this trans into new region */ #define XLOG_END_TRANS 0x10 /* End a continued transaction */ #define XLOG_UNMOUNT_TRANS 0x20 /* Unmount a filesystem transaction */ typedef struct xlog_op_header { __be32 oh_tid; /* transaction id of operation : 4 b */ __be32 oh_len; /* bytes in data region : 4 b */ __u8 oh_clientid; /* who sent me this : 1 b */ __u8 oh_flags; /* : 1 b */ __u16 oh_res2; /* 32 bit align : 2 b */ } xlog_op_header_t; /* valid values for h_fmt */ #define XLOG_FMT_UNKNOWN 0 #define XLOG_FMT_LINUX_LE 1 #define XLOG_FMT_LINUX_BE 2 #define XLOG_FMT_IRIX_BE 3 /* our fmt */ #ifdef XFS_NATIVE_HOST #define XLOG_FMT XLOG_FMT_LINUX_BE #else #define XLOG_FMT XLOG_FMT_LINUX_LE #endif typedef struct xlog_rec_header { __be32 h_magicno; /* log record (LR) identifier : 4 */ __be32 h_cycle; /* write cycle of log : 4 */ __be32 h_version; /* LR version : 4 */ __be32 h_len; /* len in bytes; should be 64-bit aligned: 4 */ __be64 h_lsn; /* lsn of this LR : 8 */ __be64 h_tail_lsn; /* lsn of 1st LR w/ buffers not committed: 8 */ __le32 h_crc; /* crc of log record : 4 */ __be32 h_prev_block; /* block number to previous LR : 4 */ __be32 h_num_logops; /* number of log operations in this LR : 4 */ __be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* new fields */ __be32 h_fmt; /* format of log record : 4 */ uuid_t h_fs_uuid; /* uuid of FS : 16 */ __be32 h_size; /* iclog size : 4 */ } xlog_rec_header_t; typedef struct xlog_rec_ext_header { __be32 xh_cycle; /* write cycle of log : 4 */ __be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */ } xlog_rec_ext_header_t; /* * Quite misnamed, because this union lays out the actual on-disk log buffer. */ typedef union xlog_in_core2 { xlog_rec_header_t hic_header; xlog_rec_ext_header_t hic_xheader; char hic_sector[XLOG_HEADER_SIZE]; } xlog_in_core_2_t; /* not an on-disk structure, but needed by log recovery in userspace */ typedef struct xfs_log_iovec { void *i_addr; /* beginning address of region */ int i_len; /* length in bytes of region */ uint i_type; /* type of region */ } xfs_log_iovec_t; /* * Transaction Header definitions. * * This is the structure written in the log at the head of every transaction. It * identifies the type and id of the transaction, and contains the number of * items logged by the transaction so we know how many to expect during * recovery. * * Do not change the below structure without redoing the code in * xlog_recover_add_to_trans() and xlog_recover_add_to_cont_trans(). */ typedef struct xfs_trans_header { uint th_magic; /* magic number */ uint th_type; /* transaction type */ int32_t th_tid; /* transaction id (unused) */ uint th_num_items; /* num items logged by trans */ } xfs_trans_header_t; #define XFS_TRANS_HEADER_MAGIC 0x5452414e /* TRAN */ /* * The only type valid for th_type in CIL-enabled file system logs: */ #define XFS_TRANS_CHECKPOINT 40 /* * Log item types. */ #define XFS_LI_EFI 0x1236 #define XFS_LI_EFD 0x1237 #define XFS_LI_IUNLINK 0x1238 #define XFS_LI_INODE 0x123b /* aligned ino chunks, var-size ibufs */ #define XFS_LI_BUF 0x123c /* v2 bufs, variable sized inode bufs */ #define XFS_LI_DQUOT 0x123d #define XFS_LI_QUOTAOFF 0x123e #define XFS_LI_ICREATE 0x123f #define XFS_LI_RUI 0x1240 /* rmap update intent */ #define XFS_LI_RUD 0x1241 #define XFS_LI_CUI 0x1242 /* refcount update intent */ #define XFS_LI_CUD 0x1243 #define XFS_LI_BUI 0x1244 /* bmbt update intent */ #define XFS_LI_BUD 0x1245 #define XFS_LI_ATTRI 0x1246 /* attr set/remove intent*/ #define XFS_LI_ATTRD 0x1247 /* attr set/remove done */ #define XFS_LI_XMI 0x1248 /* mapping exchange intent */ #define XFS_LI_XMD 0x1249 /* mapping exchange done */ #define XFS_LI_TYPE_DESC \ { XFS_LI_EFI, "XFS_LI_EFI" }, \ { XFS_LI_EFD, "XFS_LI_EFD" }, \ { XFS_LI_IUNLINK, "XFS_LI_IUNLINK" }, \ { XFS_LI_INODE, "XFS_LI_INODE" }, \ { XFS_LI_BUF, "XFS_LI_BUF" }, \ { XFS_LI_DQUOT, "XFS_LI_DQUOT" }, \ { XFS_LI_QUOTAOFF, "XFS_LI_QUOTAOFF" }, \ { XFS_LI_ICREATE, "XFS_LI_ICREATE" }, \ { XFS_LI_RUI, "XFS_LI_RUI" }, \ { XFS_LI_RUD, "XFS_LI_RUD" }, \ { XFS_LI_CUI, "XFS_LI_CUI" }, \ { XFS_LI_CUD, "XFS_LI_CUD" }, \ { XFS_LI_BUI, "XFS_LI_BUI" }, \ { XFS_LI_BUD, "XFS_LI_BUD" }, \ { XFS_LI_ATTRI, "XFS_LI_ATTRI" }, \ { XFS_LI_ATTRD, "XFS_LI_ATTRD" }, \ { XFS_LI_XMI, "XFS_LI_XMI" }, \ { XFS_LI_XMD, "XFS_LI_XMD" } /* * Inode Log Item Format definitions. * * This is the structure used to lay out an inode log item in the * log. The size of the inline data/extents/b-tree root to be logged * (if any) is indicated in the ilf_dsize field. Changes to this structure * must be added on to the end. */ struct xfs_inode_log_format { uint16_t ilf_type; /* inode log item type */ uint16_t ilf_size; /* size of this item */ uint32_t ilf_fields; /* flags for fields logged */ uint16_t ilf_asize; /* size of attr d/ext/root */ uint16_t ilf_dsize; /* size of data/ext/root */ uint32_t ilf_pad; /* pad for 64 bit boundary */ uint64_t ilf_ino; /* inode number */ union { uint32_t ilfu_rdev; /* rdev value for dev inode*/ uint8_t __pad[16]; /* unused */ } ilf_u; int64_t ilf_blkno; /* blkno of inode buffer */ int32_t ilf_len; /* len of inode buffer */ int32_t ilf_boffset; /* off of inode in buffer */ }; /* * Old 32 bit systems will log in this format without the 64 bit * alignment padding. Recovery will detect this and convert it to the * correct format. */ struct xfs_inode_log_format_32 { uint16_t ilf_type; /* inode log item type */ uint16_t ilf_size; /* size of this item */ uint32_t ilf_fields; /* flags for fields logged */ uint16_t ilf_asize; /* size of attr d/ext/root */ uint16_t ilf_dsize; /* size of data/ext/root */ uint64_t ilf_ino; /* inode number */ union { uint32_t ilfu_rdev; /* rdev value for dev inode*/ uint8_t __pad[16]; /* unused */ } ilf_u; int64_t ilf_blkno; /* blkno of inode buffer */ int32_t ilf_len; /* len of inode buffer */ int32_t ilf_boffset; /* off of inode in buffer */ } __attribute__((packed)); /* * Flags for xfs_trans_log_inode flags field. */ #define XFS_ILOG_CORE 0x001 /* log standard inode fields */ #define XFS_ILOG_DDATA 0x002 /* log i_df.if_data */ #define XFS_ILOG_DEXT 0x004 /* log i_df.if_extents */ #define XFS_ILOG_DBROOT 0x008 /* log i_df.i_broot */ #define XFS_ILOG_DEV 0x010 /* log the dev field */ #define XFS_ILOG_UUID 0x020 /* added long ago, but never used */ #define XFS_ILOG_ADATA 0x040 /* log i_af.if_data */ #define XFS_ILOG_AEXT 0x080 /* log i_af.if_extents */ #define XFS_ILOG_ABROOT 0x100 /* log i_af.i_broot */ #define XFS_ILOG_DOWNER 0x200 /* change the data fork owner on replay */ #define XFS_ILOG_AOWNER 0x400 /* change the attr fork owner on replay */ /* * The timestamps are dirty, but not necessarily anything else in the inode * core. Unlike the other fields above this one must never make it to disk * in the ilf_fields of the inode_log_format, but is purely store in-memory in * ili_fields in the inode_log_item. */ #define XFS_ILOG_TIMESTAMP 0x4000 /* * The version field has been changed, but not necessarily anything else of * interest. This must never make it to disk - it is used purely to ensure that * the inode item ->precommit operation can update the fsync flag triggers * in the inode item correctly. */ #define XFS_ILOG_IVERSION 0x8000 #define XFS_ILOG_NONCORE (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ XFS_ILOG_DBROOT | XFS_ILOG_DEV | \ XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ XFS_ILOG_ABROOT | XFS_ILOG_DOWNER | \ XFS_ILOG_AOWNER) #define XFS_ILOG_DFORK (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ XFS_ILOG_DBROOT) #define XFS_ILOG_AFORK (XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ XFS_ILOG_ABROOT) #define XFS_ILOG_ALL (XFS_ILOG_CORE | XFS_ILOG_DDATA | \ XFS_ILOG_DEXT | XFS_ILOG_DBROOT | \ XFS_ILOG_DEV | XFS_ILOG_ADATA | \ XFS_ILOG_AEXT | XFS_ILOG_ABROOT | \ XFS_ILOG_TIMESTAMP | XFS_ILOG_DOWNER | \ XFS_ILOG_AOWNER) static inline int xfs_ilog_fbroot(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); } static inline int xfs_ilog_fext(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); } static inline int xfs_ilog_fdata(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); } /* * Incore version of the on-disk inode core structures. We log this directly * into the journal in host CPU format (for better or worse) and as such * directly mirrors the xfs_dinode structure as it must contain all the same * information. */ typedef uint64_t xfs_log_timestamp_t; /* Legacy timestamp encoding format. */ struct xfs_log_legacy_timestamp { int32_t t_sec; /* timestamp seconds */ int32_t t_nsec; /* timestamp nanoseconds */ }; /* * Define the format of the inode core that is logged. This structure must be * kept identical to struct xfs_dinode except for the endianness annotations. */ struct xfs_log_dinode { uint16_t di_magic; /* inode magic # = XFS_DINODE_MAGIC */ uint16_t di_mode; /* mode and type of file */ int8_t di_version; /* inode version */ int8_t di_format; /* format of di_c data */ uint8_t di_pad3[2]; /* unused in v2/3 inodes */ uint32_t di_uid; /* owner's user id */ uint32_t di_gid; /* owner's group id */ uint32_t di_nlink; /* number of links to file */ uint16_t di_projid_lo; /* lower part of owner's project id */ uint16_t di_projid_hi; /* higher part of owner's project id */ union { /* Number of data fork extents if NREXT64 is set */ uint64_t di_big_nextents; /* Padding for V3 inodes without NREXT64 set. */ uint64_t di_v3_pad; /* Padding and inode flush counter for V2 inodes. */ struct { uint8_t di_v2_pad[6]; /* V2 inode zeroed space */ uint16_t di_flushiter; /* V2 inode incremented on flush */ }; }; xfs_log_timestamp_t di_atime; /* time last accessed */ xfs_log_timestamp_t di_mtime; /* time last modified */ xfs_log_timestamp_t di_ctime; /* time created/inode modified */ xfs_fsize_t di_size; /* number of bytes in file */ xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */ xfs_extlen_t di_extsize; /* basic/minimum extent size for file */ union { /* * For V2 inodes and V3 inodes without NREXT64 set, this * is the number of data and attr fork extents. */ struct { uint32_t di_nextents; uint16_t di_anextents; } __packed; /* Number of attr fork extents if NREXT64 is set. */ struct { uint32_t di_big_anextents; uint16_t di_nrext64_pad; } __packed; } __packed; uint8_t di_forkoff; /* attr fork offs, <<3 for 64b align */ int8_t di_aformat; /* format of attr fork's data */ uint32_t di_dmevmask; /* DMIG event mask */ uint16_t di_dmstate; /* DMIG state info */ uint16_t di_flags; /* random flags, XFS_DIFLAG_... */ uint32_t di_gen; /* generation number */ /* di_next_unlinked is the only non-core field in the old dinode */ xfs_agino_t di_next_unlinked;/* agi unlinked list ptr */ /* start of the extended dinode, writable fields */ uint32_t di_crc; /* CRC of the inode */ uint64_t di_changecount; /* number of attribute changes */ /* * The LSN we write to this field during formatting is not a reflection * of the current on-disk LSN. It should never be used for recovery * sequencing, nor should it be recovered into the on-disk inode at all. * See xlog_recover_inode_commit_pass2() and xfs_log_dinode_to_disk() * for details. */ xfs_lsn_t di_lsn; uint64_t di_flags2; /* more random flags */ uint32_t di_cowextsize; /* basic cow extent size for file */ uint8_t di_pad2[12]; /* more padding for future expansion */ /* fields only written to during inode creation */ xfs_log_timestamp_t di_crtime; /* time created */ xfs_ino_t di_ino; /* inode number */ uuid_t di_uuid; /* UUID of the filesystem */ /* structure must be padded to 64 bit alignment */ }; #define xfs_log_dinode_size(mp) \ (xfs_has_v3inodes((mp)) ? \ sizeof(struct xfs_log_dinode) : \ offsetof(struct xfs_log_dinode, di_next_unlinked)) /* * Buffer Log Format definitions * * These are the physical dirty bitmap definitions for the log format structure. */ #define XFS_BLF_CHUNK 128 #define XFS_BLF_SHIFT 7 #define BIT_TO_WORD_SHIFT 5 #define NBWORD (NBBY * sizeof(unsigned int)) /* * This flag indicates that the buffer contains on disk inodes * and requires special recovery handling. */ #define XFS_BLF_INODE_BUF (1<<0) /* * This flag indicates that the buffer should not be replayed * during recovery because its blocks are being freed. */ #define XFS_BLF_CANCEL (1<<1) /* * This flag indicates that the buffer contains on disk * user or group dquots and may require special recovery handling. */ #define XFS_BLF_UDQUOT_BUF (1<<2) #define XFS_BLF_PDQUOT_BUF (1<<3) #define XFS_BLF_GDQUOT_BUF (1<<4) /* * This is the structure used to lay out a buf log item in the log. The data * map describes which 128 byte chunks of the buffer have been logged. * * The placement of blf_map_size causes blf_data_map to start at an odd * multiple of sizeof(unsigned int) offset within the struct. Because the data * bitmap size will always be an even number, the end of the data_map (and * therefore the structure) will also be at an odd multiple of sizeof(unsigned * int). Some 64-bit compilers will insert padding at the end of the struct to * ensure 64-bit alignment of blf_blkno, but 32-bit ones will not. Therefore, * XFS_BLF_DATAMAP_SIZE must be an odd number to make the padding explicit and * keep the structure size consistent between 32-bit and 64-bit platforms. */ #define __XFS_BLF_DATAMAP_SIZE ((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) / NBWORD) #define XFS_BLF_DATAMAP_SIZE (__XFS_BLF_DATAMAP_SIZE + 1) typedef struct xfs_buf_log_format { unsigned short blf_type; /* buf log item type indicator */ unsigned short blf_size; /* size of this item */ unsigned short blf_flags; /* misc state */ unsigned short blf_len; /* number of blocks in this buf */ int64_t blf_blkno; /* starting blkno of this buf */ unsigned int blf_map_size; /* used size of data bitmap in words */ unsigned int blf_data_map[XFS_BLF_DATAMAP_SIZE]; /* dirty bitmap */ } xfs_buf_log_format_t; /* * All buffers now need to tell recovery where the magic number * is so that it can verify and calculate the CRCs on the buffer correctly * once the changes have been replayed into the buffer. * * The type value is held in the upper 5 bits of the blf_flags field, which is * an unsigned 16 bit field. Hence we need to shift it 11 bits up and down. */ #define XFS_BLFT_BITS 5 #define XFS_BLFT_SHIFT 11 #define XFS_BLFT_MASK (((1 << XFS_BLFT_BITS) - 1) << XFS_BLFT_SHIFT) enum xfs_blft { XFS_BLFT_UNKNOWN_BUF = 0, XFS_BLFT_UDQUOT_BUF, XFS_BLFT_PDQUOT_BUF, XFS_BLFT_GDQUOT_BUF, XFS_BLFT_BTREE_BUF, XFS_BLFT_AGF_BUF, XFS_BLFT_AGFL_BUF, XFS_BLFT_AGI_BUF, XFS_BLFT_DINO_BUF, XFS_BLFT_SYMLINK_BUF, XFS_BLFT_DIR_BLOCK_BUF, XFS_BLFT_DIR_DATA_BUF, XFS_BLFT_DIR_FREE_BUF, XFS_BLFT_DIR_LEAF1_BUF, XFS_BLFT_DIR_LEAFN_BUF, XFS_BLFT_DA_NODE_BUF, XFS_BLFT_ATTR_LEAF_BUF, XFS_BLFT_ATTR_RMT_BUF, XFS_BLFT_SB_BUF, XFS_BLFT_RTBITMAP_BUF, XFS_BLFT_RTSUMMARY_BUF, XFS_BLFT_MAX_BUF = (1 << XFS_BLFT_BITS), }; static inline void xfs_blft_to_flags(struct xfs_buf_log_format *blf, enum xfs_blft type) { ASSERT(type > XFS_BLFT_UNKNOWN_BUF && type < XFS_BLFT_MAX_BUF); blf->blf_flags &= ~XFS_BLFT_MASK; blf->blf_flags |= ((type << XFS_BLFT_SHIFT) & XFS_BLFT_MASK); } static inline uint16_t xfs_blft_from_flags(struct xfs_buf_log_format *blf) { return (blf->blf_flags & XFS_BLFT_MASK) >> XFS_BLFT_SHIFT; } /* * EFI/EFD log format definitions */ typedef struct xfs_extent { xfs_fsblock_t ext_start; xfs_extlen_t ext_len; } xfs_extent_t; /* * Since an xfs_extent_t has types (start:64, len: 32) * there are different alignments on 32 bit and 64 bit kernels. * So we provide the different variants for use by a * conversion routine. */ typedef struct xfs_extent_32 { uint64_t ext_start; uint32_t ext_len; } __attribute__((packed)) xfs_extent_32_t; typedef struct xfs_extent_64 { uint64_t ext_start; uint32_t ext_len; uint32_t ext_pad; } xfs_extent_64_t; /* * This is the structure used to lay out an efi log item in the * log. The efi_extents field is a variable size array whose * size is given by efi_nextents. */ typedef struct xfs_efi_log_format { uint16_t efi_type; /* efi log item type */ uint16_t efi_size; /* size of this item */ uint32_t efi_nextents; /* # extents to free */ uint64_t efi_id; /* efi identifier */ xfs_extent_t efi_extents[]; /* array of extents to free */ } xfs_efi_log_format_t; static inline size_t xfs_efi_log_format_sizeof( unsigned int nr) { return sizeof(struct xfs_efi_log_format) + nr * sizeof(struct xfs_extent); } typedef struct xfs_efi_log_format_32 { uint16_t efi_type; /* efi log item type */ uint16_t efi_size; /* size of this item */ uint32_t efi_nextents; /* # extents to free */ uint64_t efi_id; /* efi identifier */ xfs_extent_32_t efi_extents[]; /* array of extents to free */ } __attribute__((packed)) xfs_efi_log_format_32_t; static inline size_t xfs_efi_log_format32_sizeof( unsigned int nr) { return sizeof(struct xfs_efi_log_format_32) + nr * sizeof(struct xfs_extent_32); } typedef struct xfs_efi_log_format_64 { uint16_t efi_type; /* efi log item type */ uint16_t efi_size; /* size of this item */ uint32_t efi_nextents; /* # extents to free */ uint64_t efi_id; /* efi identifier */ xfs_extent_64_t efi_extents[]; /* array of extents to free */ } xfs_efi_log_format_64_t; static inline size_t xfs_efi_log_format64_sizeof( unsigned int nr) { return sizeof(struct xfs_efi_log_format_64) + nr * sizeof(struct xfs_extent_64); } /* * This is the structure used to lay out an efd log item in the * log. The efd_extents array is a variable size array whose * size is given by efd_nextents; */ typedef struct xfs_efd_log_format { uint16_t efd_type; /* efd log item type */ uint16_t efd_size; /* size of this item */ uint32_t efd_nextents; /* # of extents freed */ uint64_t efd_efi_id; /* id of corresponding efi */ xfs_extent_t efd_extents[]; /* array of extents freed */ } xfs_efd_log_format_t; static inline size_t xfs_efd_log_format_sizeof( unsigned int nr) { return sizeof(struct xfs_efd_log_format) + nr * sizeof(struct xfs_extent); } typedef struct xfs_efd_log_format_32 { uint16_t efd_type; /* efd log item type */ uint16_t efd_size; /* size of this item */ uint32_t efd_nextents; /* # of extents freed */ uint64_t efd_efi_id; /* id of corresponding efi */ xfs_extent_32_t efd_extents[]; /* array of extents freed */ } __attribute__((packed)) xfs_efd_log_format_32_t; static inline size_t xfs_efd_log_format32_sizeof( unsigned int nr) { return sizeof(struct xfs_efd_log_format_32) + nr * sizeof(struct xfs_extent_32); } typedef struct xfs_efd_log_format_64 { uint16_t efd_type; /* efd log item type */ uint16_t efd_size; /* size of this item */ uint32_t efd_nextents; /* # of extents freed */ uint64_t efd_efi_id; /* id of corresponding efi */ xfs_extent_64_t efd_extents[]; /* array of extents freed */ } xfs_efd_log_format_64_t; static inline size_t xfs_efd_log_format64_sizeof( unsigned int nr) { return sizeof(struct xfs_efd_log_format_64) + nr * sizeof(struct xfs_extent_64); } /* * RUI/RUD (reverse mapping) log format definitions */ struct xfs_map_extent { uint64_t me_owner; uint64_t me_startblock; uint64_t me_startoff; uint32_t me_len; uint32_t me_flags; }; /* rmap me_flags: upper bits are flags, lower byte is type code */ #define XFS_RMAP_EXTENT_MAP 1 #define XFS_RMAP_EXTENT_MAP_SHARED 2 #define XFS_RMAP_EXTENT_UNMAP 3 #define XFS_RMAP_EXTENT_UNMAP_SHARED 4 #define XFS_RMAP_EXTENT_CONVERT 5 #define XFS_RMAP_EXTENT_CONVERT_SHARED 6 #define XFS_RMAP_EXTENT_ALLOC 7 #define XFS_RMAP_EXTENT_FREE 8 #define XFS_RMAP_EXTENT_TYPE_MASK 0xFF #define XFS_RMAP_EXTENT_ATTR_FORK (1U << 31) #define XFS_RMAP_EXTENT_BMBT_BLOCK (1U << 30) #define XFS_RMAP_EXTENT_UNWRITTEN (1U << 29) #define XFS_RMAP_EXTENT_FLAGS (XFS_RMAP_EXTENT_TYPE_MASK | \ XFS_RMAP_EXTENT_ATTR_FORK | \ XFS_RMAP_EXTENT_BMBT_BLOCK | \ XFS_RMAP_EXTENT_UNWRITTEN) /* * This is the structure used to lay out an rui log item in the * log. The rui_extents field is a variable size array whose * size is given by rui_nextents. */ struct xfs_rui_log_format { uint16_t rui_type; /* rui log item type */ uint16_t rui_size; /* size of this item */ uint32_t rui_nextents; /* # extents to free */ uint64_t rui_id; /* rui identifier */ struct xfs_map_extent rui_extents[]; /* array of extents to rmap */ }; static inline size_t xfs_rui_log_format_sizeof( unsigned int nr) { return sizeof(struct xfs_rui_log_format) + nr * sizeof(struct xfs_map_extent); } /* * This is the structure used to lay out an rud log item in the * log. The rud_extents array is a variable size array whose * size is given by rud_nextents; */ struct xfs_rud_log_format { uint16_t rud_type; /* rud log item type */ uint16_t rud_size; /* size of this item */ uint32_t __pad; uint64_t rud_rui_id; /* id of corresponding rui */ }; /* * CUI/CUD (refcount update) log format definitions */ struct xfs_phys_extent { uint64_t pe_startblock; uint32_t pe_len; uint32_t pe_flags; }; /* refcount pe_flags: upper bits are flags, lower byte is type code */ /* Type codes are taken directly from enum xfs_refcount_intent_type. */ #define XFS_REFCOUNT_EXTENT_TYPE_MASK 0xFF #define XFS_REFCOUNT_EXTENT_FLAGS (XFS_REFCOUNT_EXTENT_TYPE_MASK) /* * This is the structure used to lay out a cui log item in the * log. The cui_extents field is a variable size array whose * size is given by cui_nextents. */ struct xfs_cui_log_format { uint16_t cui_type; /* cui log item type */ uint16_t cui_size; /* size of this item */ uint32_t cui_nextents; /* # extents to free */ uint64_t cui_id; /* cui identifier */ struct xfs_phys_extent cui_extents[]; /* array of extents */ }; static inline size_t xfs_cui_log_format_sizeof( unsigned int nr) { return sizeof(struct xfs_cui_log_format) + nr * sizeof(struct xfs_phys_extent); } /* * This is the structure used to lay out a cud log item in the * log. The cud_extents array is a variable size array whose * size is given by cud_nextents; */ struct xfs_cud_log_format { uint16_t cud_type; /* cud log item type */ uint16_t cud_size; /* size of this item */ uint32_t __pad; uint64_t cud_cui_id; /* id of corresponding cui */ }; /* * BUI/BUD (inode block mapping) log format definitions */ /* bmbt me_flags: upper bits are flags, lower byte is type code */ /* Type codes are taken directly from enum xfs_bmap_intent_type. */ #define XFS_BMAP_EXTENT_TYPE_MASK 0xFF #define XFS_BMAP_EXTENT_ATTR_FORK (1U << 31) #define XFS_BMAP_EXTENT_UNWRITTEN (1U << 30) #define XFS_BMAP_EXTENT_REALTIME (1U << 29) #define XFS_BMAP_EXTENT_FLAGS (XFS_BMAP_EXTENT_TYPE_MASK | \ XFS_BMAP_EXTENT_ATTR_FORK | \ XFS_BMAP_EXTENT_UNWRITTEN | \ XFS_BMAP_EXTENT_REALTIME) /* * This is the structure used to lay out an bui log item in the * log. The bui_extents field is a variable size array whose * size is given by bui_nextents. */ struct xfs_bui_log_format { uint16_t bui_type; /* bui log item type */ uint16_t bui_size; /* size of this item */ uint32_t bui_nextents; /* # extents to free */ uint64_t bui_id; /* bui identifier */ struct xfs_map_extent bui_extents[]; /* array of extents to bmap */ }; static inline size_t xfs_bui_log_format_sizeof( unsigned int nr) { return sizeof(struct xfs_bui_log_format) + nr * sizeof(struct xfs_map_extent); } /* * This is the structure used to lay out an bud log item in the * log. The bud_extents array is a variable size array whose * size is given by bud_nextents; */ struct xfs_bud_log_format { uint16_t bud_type; /* bud log item type */ uint16_t bud_size; /* size of this item */ uint32_t __pad; uint64_t bud_bui_id; /* id of corresponding bui */ }; /* * XMI/XMD (file mapping exchange) log format definitions */ /* This is the structure used to lay out an mapping exchange log item. */ struct xfs_xmi_log_format { uint16_t xmi_type; /* xmi log item type */ uint16_t xmi_size; /* size of this item */ uint32_t __pad; /* must be zero */ uint64_t xmi_id; /* xmi identifier */ uint64_t xmi_inode1; /* inumber of first file */ uint64_t xmi_inode2; /* inumber of second file */ uint32_t xmi_igen1; /* generation of first file */ uint32_t xmi_igen2; /* generation of second file */ uint64_t xmi_startoff1; /* block offset into file1 */ uint64_t xmi_startoff2; /* block offset into file2 */ uint64_t xmi_blockcount; /* number of blocks */ uint64_t xmi_flags; /* XFS_EXCHMAPS_* */ uint64_t xmi_isize1; /* intended file1 size */ uint64_t xmi_isize2; /* intended file2 size */ }; /* Exchange mappings between extended attribute forks instead of data forks. */ #define XFS_EXCHMAPS_ATTR_FORK (1ULL << 0) /* Set the file sizes when finished. */ #define XFS_EXCHMAPS_SET_SIZES (1ULL << 1) /* * Exchange the mappings of the two files only if the file allocation units * mapped to file1's range have been written. */ #define XFS_EXCHMAPS_INO1_WRITTEN (1ULL << 2) /* Clear the reflink flag from inode1 after the operation. */ #define XFS_EXCHMAPS_CLEAR_INO1_REFLINK (1ULL << 3) /* Clear the reflink flag from inode2 after the operation. */ #define XFS_EXCHMAPS_CLEAR_INO2_REFLINK (1ULL << 4) #define XFS_EXCHMAPS_LOGGED_FLAGS (XFS_EXCHMAPS_ATTR_FORK | \ XFS_EXCHMAPS_SET_SIZES | \ XFS_EXCHMAPS_INO1_WRITTEN | \ XFS_EXCHMAPS_CLEAR_INO1_REFLINK | \ XFS_EXCHMAPS_CLEAR_INO2_REFLINK) /* This is the structure used to lay out an mapping exchange done log item. */ struct xfs_xmd_log_format { uint16_t xmd_type; /* xmd log item type */ uint16_t xmd_size; /* size of this item */ uint32_t __pad; uint64_t xmd_xmi_id; /* id of corresponding xmi */ }; /* * Dquot Log format definitions. * * The first two fields must be the type and size fitting into * 32 bits : log_recovery code assumes that. */ typedef struct xfs_dq_logformat { uint16_t qlf_type; /* dquot log item type */ uint16_t qlf_size; /* size of this item */ xfs_dqid_t qlf_id; /* usr/grp/proj id : 32 bits */ int64_t qlf_blkno; /* blkno of dquot buffer */ int32_t qlf_len; /* len of dquot buffer */ uint32_t qlf_boffset; /* off of dquot in buffer */ } xfs_dq_logformat_t; /* * log format struct for QUOTAOFF records. * The first two fields must be the type and size fitting into * 32 bits : log_recovery code assumes that. * We write two LI_QUOTAOFF logitems per quotaoff, the last one keeps a pointer * to the first and ensures that the first logitem is taken out of the AIL * only when the last one is securely committed. */ typedef struct xfs_qoff_logformat { unsigned short qf_type; /* quotaoff log item type */ unsigned short qf_size; /* size of this item */ unsigned int qf_flags; /* USR and/or GRP */ char qf_pad[12]; /* padding for future */ } xfs_qoff_logformat_t; /* * Disk quotas status in m_qflags, and also sb_qflags. 16 bits. */ #define XFS_UQUOTA_ACCT 0x0001 /* user quota accounting ON */ #define XFS_UQUOTA_ENFD 0x0002 /* user quota limits enforced */ #define XFS_UQUOTA_CHKD 0x0004 /* quotacheck run on usr quotas */ #define XFS_PQUOTA_ACCT 0x0008 /* project quota accounting ON */ #define XFS_OQUOTA_ENFD 0x0010 /* other (grp/prj) quota limits enforced */ #define XFS_OQUOTA_CHKD 0x0020 /* quotacheck run on other (grp/prj) quotas */ #define XFS_GQUOTA_ACCT 0x0040 /* group quota accounting ON */ /* * Conversion to and from the combined OQUOTA flag (if necessary) * is done only in xfs_sb_qflags_to_disk() and xfs_sb_qflags_from_disk() */ #define XFS_GQUOTA_ENFD 0x0080 /* group quota limits enforced */ #define XFS_GQUOTA_CHKD 0x0100 /* quotacheck run on group quotas */ #define XFS_PQUOTA_ENFD 0x0200 /* project quota limits enforced */ #define XFS_PQUOTA_CHKD 0x0400 /* quotacheck run on project quotas */ #define XFS_ALL_QUOTA_ACCT \ (XFS_UQUOTA_ACCT | XFS_GQUOTA_ACCT | XFS_PQUOTA_ACCT) #define XFS_ALL_QUOTA_ENFD \ (XFS_UQUOTA_ENFD | XFS_GQUOTA_ENFD | XFS_PQUOTA_ENFD) #define XFS_ALL_QUOTA_CHKD \ (XFS_UQUOTA_CHKD | XFS_GQUOTA_CHKD | XFS_PQUOTA_CHKD) #define XFS_MOUNT_QUOTA_ALL (XFS_UQUOTA_ACCT|XFS_UQUOTA_ENFD|\ XFS_UQUOTA_CHKD|XFS_GQUOTA_ACCT|\ XFS_GQUOTA_ENFD|XFS_GQUOTA_CHKD|\ XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD|\ XFS_PQUOTA_CHKD) /* * Inode create log item structure * * Log recovery assumes the first two entries are the type and size and they fit * in 32 bits. Also in host order (ugh) so they have to be 32 bit aligned so * decoding can be done correctly. */ struct xfs_icreate_log { uint16_t icl_type; /* type of log format structure */ uint16_t icl_size; /* size of log format structure */ __be32 icl_ag; /* ag being allocated in */ __be32 icl_agbno; /* start block of inode range */ __be32 icl_count; /* number of inodes to initialise */ __be32 icl_isize; /* size of inodes */ __be32 icl_length; /* length of extent to initialise */ __be32 icl_gen; /* inode generation number to use */ }; /* * Flags for deferred attribute operations. * Upper bits are flags, lower byte is type code */ #define XFS_ATTRI_OP_FLAGS_SET 1 /* Set the attribute */ #define XFS_ATTRI_OP_FLAGS_REMOVE 2 /* Remove the attribute */ #define XFS_ATTRI_OP_FLAGS_REPLACE 3 /* Replace the attribute */ #define XFS_ATTRI_OP_FLAGS_PPTR_SET 4 /* Set parent pointer */ #define XFS_ATTRI_OP_FLAGS_PPTR_REMOVE 5 /* Remove parent pointer */ #define XFS_ATTRI_OP_FLAGS_PPTR_REPLACE 6 /* Replace parent pointer */ #define XFS_ATTRI_OP_FLAGS_TYPE_MASK 0xFF /* Flags type mask */ /* * alfi_attr_filter captures the state of xfs_da_args.attr_filter, so it should * never have any other bits set. */ #define XFS_ATTRI_FILTER_MASK (XFS_ATTR_ROOT | \ XFS_ATTR_SECURE | \ XFS_ATTR_PARENT | \ XFS_ATTR_INCOMPLETE) /* * This is the structure used to lay out an attr log item in the * log. */ struct xfs_attri_log_format { uint16_t alfi_type; /* attri log item type */ uint16_t alfi_size; /* size of this item */ uint32_t alfi_igen; /* generation of alfi_ino for pptr ops */ uint64_t alfi_id; /* attri identifier */ uint64_t alfi_ino; /* the inode for this attr operation */ uint32_t alfi_op_flags; /* marks the op as a set or remove */ union { uint32_t alfi_name_len; /* attr name length */ struct { /* * For PPTR_REPLACE, these are the lengths of the old * and new attr names. The new and old values must * have the same length. */ uint16_t alfi_old_name_len; uint16_t alfi_new_name_len; }; }; uint32_t alfi_value_len; /* attr value length */ uint32_t alfi_attr_filter;/* attr filter flags */ }; struct xfs_attrd_log_format { uint16_t alfd_type; /* attrd log item type */ uint16_t alfd_size; /* size of this item */ uint32_t __pad; /* pad to 64 bit aligned */ uint64_t alfd_alf_id; /* id of corresponding attri */ }; #endif /* __XFS_LOG_FORMAT_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1