/* SPDX-License-Identifier: GPL-2.0 */ /* atmdev.h - ATM device driver declarations and various related items */ #ifndef LINUX_ATMDEV_H #define LINUX_ATMDEV_H #include <linux/wait.h> /* wait_queue_head_t */ #include <linux/time.h> /* struct timeval */ #include <linux/net.h> #include <linux/bug.h> #include <linux/skbuff.h> /* struct sk_buff */ #include <linux/uio.h> #include <net/sock.h> #include <linux/atomic.h> #include <linux/refcount.h> #include <uapi/linux/atmdev.h> #ifdef CONFIG_PROC_FS #include <linux/proc_fs.h> extern struct proc_dir_entry *atm_proc_root; #endif #ifdef CONFIG_COMPAT #include <linux/compat.h> struct compat_atm_iobuf { int length; compat_uptr_t buffer; }; #endif struct k_atm_aal_stats { #define __HANDLE_ITEM(i) atomic_t i __AAL_STAT_ITEMS #undef __HANDLE_ITEM }; struct k_atm_dev_stats { struct k_atm_aal_stats aal0; struct k_atm_aal_stats aal34; struct k_atm_aal_stats aal5; }; struct device; enum { ATM_VF_ADDR, /* Address is in use. Set by anybody, cleared by device driver. */ ATM_VF_READY, /* VC is ready to transfer data. Set by device driver, cleared by anybody. */ ATM_VF_PARTIAL, /* resources are bound to PVC (partial PVC setup), controlled by socket layer */ ATM_VF_REGIS, /* registered with demon, controlled by SVC socket layer */ ATM_VF_BOUND, /* local SAP is set, controlled by SVC socket layer */ ATM_VF_RELEASED, /* demon has indicated/requested release, controlled by SVC socket layer */ ATM_VF_HASQOS, /* QOS parameters have been set */ ATM_VF_LISTEN, /* socket is used for listening */ ATM_VF_META, /* SVC socket isn't used for normal data traffic and doesn't depend on signaling to be available */ ATM_VF_SESSION, /* VCC is p2mp session control descriptor */ ATM_VF_HASSAP, /* SAP has been set */ ATM_VF_CLOSE, /* asynchronous close - treat like VF_RELEASED*/ ATM_VF_WAITING, /* waiting for reply from sigd */ ATM_VF_IS_CLIP, /* in use by CLIP protocol */ }; #define ATM_VF2VS(flags) \ (test_bit(ATM_VF_READY,&(flags)) ? ATM_VS_CONNECTED : \ test_bit(ATM_VF_RELEASED,&(flags)) ? ATM_VS_CLOSING : \ test_bit(ATM_VF_LISTEN,&(flags)) ? ATM_VS_LISTEN : \ test_bit(ATM_VF_REGIS,&(flags)) ? ATM_VS_INUSE : \ test_bit(ATM_VF_BOUND,&(flags)) ? ATM_VS_BOUND : ATM_VS_IDLE) enum { ATM_DF_REMOVED, /* device was removed from atm_devs list */ }; #define ATM_PHY_SIG_LOST 0 /* no carrier/light */ #define ATM_PHY_SIG_UNKNOWN 1 /* carrier/light status is unknown */ #define ATM_PHY_SIG_FOUND 2 /* carrier/light okay */ #define ATM_ATMOPT_CLP 1 /* set CLP bit */ struct atm_vcc { /* struct sock has to be the first member of atm_vcc */ struct sock sk; unsigned long flags; /* VCC flags (ATM_VF_*) */ short vpi; /* VPI and VCI (types must be equal */ /* with sockaddr) */ int vci; unsigned long aal_options; /* AAL layer options */ unsigned long atm_options; /* ATM layer options */ struct atm_dev *dev; /* device back pointer */ struct atm_qos qos; /* QOS */ struct atm_sap sap; /* SAP */ void (*release_cb)(struct atm_vcc *vcc); /* release_sock callback */ void (*push)(struct atm_vcc *vcc,struct sk_buff *skb); void (*pop)(struct atm_vcc *vcc,struct sk_buff *skb); /* optional */ int (*push_oam)(struct atm_vcc *vcc,void *cell); int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); void *dev_data; /* per-device data */ void *proto_data; /* per-protocol data */ struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ struct module *owner; /* owner of ->push function */ /* SVC part --- may move later ------------------------------------- */ short itf; /* interface number */ struct sockaddr_atmsvc local; struct sockaddr_atmsvc remote; /* Multipoint part ------------------------------------------------- */ struct atm_vcc *session; /* session VCC descriptor */ /* Other stuff ----------------------------------------------------- */ void *user_back; /* user backlink - not touched by */ /* native ATM stack. Currently used */ /* by CLIP and sch_atm. */ }; static inline struct atm_vcc *atm_sk(struct sock *sk) { return (struct atm_vcc *)sk; } static inline struct atm_vcc *ATM_SD(struct socket *sock) { return atm_sk(sock->sk); } static inline struct sock *sk_atm(struct atm_vcc *vcc) { return (struct sock *)vcc; } struct atm_dev_addr { struct sockaddr_atmsvc addr; /* ATM address */ struct list_head entry; /* next address */ }; enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS }; struct atm_dev { const struct atmdev_ops *ops; /* device operations; NULL if unused */ const struct atmphy_ops *phy; /* PHY operations, may be undefined */ /* (NULL) */ const char *type; /* device type name */ int number; /* device index */ void *dev_data; /* per-device data */ void *phy_data; /* private PHY data */ unsigned long flags; /* device flags (ATM_DF_*) */ struct list_head local; /* local ATM addresses */ struct list_head lecs; /* LECS ATM addresses learned via ILMI */ unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */ struct atm_cirange ci_range; /* VPI/VCI range */ struct k_atm_dev_stats stats; /* statistics */ char signal; /* signal status (ATM_PHY_SIG_*) */ int link_rate; /* link rate (default: OC3) */ refcount_t refcnt; /* reference count */ spinlock_t lock; /* protect internal members */ #ifdef CONFIG_PROC_FS struct proc_dir_entry *proc_entry; /* proc entry */ char *proc_name; /* proc entry name */ #endif struct device class_dev; /* sysfs device */ struct list_head dev_list; /* linkage */ }; /* OF: send_Oam Flags */ #define ATM_OF_IMMED 1 /* Attempt immediate delivery */ #define ATM_OF_INRATE 2 /* Attempt in-rate delivery */ struct atmdev_ops { /* only send is required */ void (*dev_close)(struct atm_dev *dev); int (*open)(struct atm_vcc *vcc); void (*close)(struct atm_vcc *vcc); int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); #ifdef CONFIG_COMPAT int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd, void __user *arg); #endif int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); int (*send_bh)(struct atm_vcc *vcc, struct sk_buff *skb); int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags); void (*phy_put)(struct atm_dev *dev,unsigned char value, unsigned long addr); unsigned char (*phy_get)(struct atm_dev *dev,unsigned long addr); int (*change_qos)(struct atm_vcc *vcc,struct atm_qos *qos,int flags); int (*proc_read)(struct atm_dev *dev,loff_t *pos,char *page); struct module *owner; }; struct atmphy_ops { int (*start)(struct atm_dev *dev); int (*ioctl)(struct atm_dev *dev,unsigned int cmd,void __user *arg); void (*interrupt)(struct atm_dev *dev); int (*stop)(struct atm_dev *dev); }; struct atm_skb_data { struct atm_vcc *vcc; /* ATM VCC */ unsigned long atm_options; /* ATM layer options */ unsigned int acct_truesize; /* truesize accounted to vcc */ } __packed; #define VCC_HTABLE_SIZE 32 extern struct hlist_head vcc_hash[VCC_HTABLE_SIZE]; extern rwlock_t vcc_sklist_lock; #define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb)) struct atm_dev *atm_dev_register(const char *type, struct device *parent, const struct atmdev_ops *ops, int number, /* -1 == pick first available */ unsigned long *flags); struct atm_dev *atm_dev_lookup(int number); void atm_dev_deregister(struct atm_dev *dev); /* atm_dev_signal_change * * Propagate lower layer signal change in atm_dev->signal to netdevice. * The event will be sent via a notifier call chain. */ void atm_dev_signal_change(struct atm_dev *dev, char signal); void vcc_insert_socket(struct sock *sk); void atm_dev_release_vccs(struct atm_dev *dev); static inline void atm_account_tx(struct atm_vcc *vcc, struct sk_buff *skb) { /* * Because ATM skbs may not belong to a sock (and we don't * necessarily want to), skb->truesize may be adjusted, * escaping the hack in pskb_expand_head() which avoids * doing so for some cases. So stash the value of truesize * at the time we accounted it, and atm_pop_raw() can use * that value later, in case it changes. */ refcount_add(skb->truesize, &sk_atm(vcc)->sk_wmem_alloc); ATM_SKB(skb)->acct_truesize = skb->truesize; ATM_SKB(skb)->atm_options = vcc->atm_options; } static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) { atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc); } static inline void atm_return(struct atm_vcc *vcc,int truesize) { atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc); } static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size) { return (size + refcount_read(&sk_atm(vcc)->sk_wmem_alloc)) < sk_atm(vcc)->sk_sndbuf; } static inline void atm_dev_hold(struct atm_dev *dev) { refcount_inc(&dev->refcnt); } static inline void atm_dev_put(struct atm_dev *dev) { if (refcount_dec_and_test(&dev->refcnt)) { BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags)); if (dev->ops->dev_close) dev->ops->dev_close(dev); put_device(&dev->class_dev); } } int atm_charge(struct atm_vcc *vcc,int truesize); struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, gfp_t gfp_flags); int atm_pcr_goal(const struct atm_trafprm *tp); void vcc_release_async(struct atm_vcc *vcc, int reply); struct atm_ioctl { struct module *owner; /* A module reference is kept if appropriate over this call. * Return -ENOIOCTLCMD if you don't handle it. */ int (*ioctl)(struct socket *, unsigned int cmd, unsigned long arg); struct list_head list; }; /** * register_atm_ioctl - register handler for ioctl operations * * Special (non-device) handlers of ioctl's should * register here. If you're a normal device, you should * set .ioctl in your atmdev_ops instead. */ void register_atm_ioctl(struct atm_ioctl *); /** * deregister_atm_ioctl - remove the ioctl handler */ void deregister_atm_ioctl(struct atm_ioctl *); /* register_atmdevice_notifier - register atm_dev notify events * * Clients like br2684 will register notify events * Currently we notify of signal found/lost */ int register_atmdevice_notifier(struct notifier_block *nb); void unregister_atmdevice_notifier(struct notifier_block *nb); #endif