Contributors: 119
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Rafael J. Wysocki |
369 |
8.83% |
33 |
10.03% |
| Greg Kroah-Hartman |
339 |
8.11% |
45 |
13.68% |
| Patrick Mochel |
316 |
7.56% |
33 |
10.03% |
| Linus Torvalds |
314 |
7.52% |
4 |
1.22% |
| Kay Sievers |
204 |
4.88% |
15 |
4.56% |
| Tejun Heo |
188 |
4.50% |
3 |
0.91% |
| Saravana Kannan |
173 |
4.14% |
10 |
3.04% |
| Dmitry Torokhov |
159 |
3.81% |
10 |
3.04% |
| Joe Perches |
143 |
3.42% |
4 |
1.22% |
| Christoph Hellwig |
120 |
2.87% |
6 |
1.82% |
| Dan J Williams |
108 |
2.58% |
6 |
1.82% |
| Mark Brown |
101 |
2.42% |
3 |
0.91% |
| Andy Shevchenko |
92 |
2.20% |
5 |
1.52% |
| Won Chung |
70 |
1.68% |
1 |
0.30% |
| Rajat Jain |
68 |
1.63% |
1 |
0.30% |
| Bartosz Golaszewski |
62 |
1.48% |
5 |
1.52% |
| Alan Stern |
52 |
1.24% |
7 |
2.13% |
| David Brownell |
51 |
1.22% |
3 |
0.91% |
| Sudip Mukherjee |
50 |
1.20% |
1 |
0.30% |
| Marc Zyngier |
48 |
1.15% |
1 |
0.30% |
| Kees Cook |
47 |
1.12% |
2 |
0.61% |
| James Bottomley |
47 |
1.12% |
3 |
0.91% |
| Rasmus Villemoes |
45 |
1.08% |
1 |
0.30% |
| Thomas Gleixner |
45 |
1.08% |
4 |
1.22% |
| James Clark |
38 |
0.91% |
1 |
0.30% |
| Phil Sutter |
37 |
0.89% |
1 |
0.30% |
| Cornelia Huck |
34 |
0.81% |
5 |
1.52% |
| Mark McLoughlin |
30 |
0.72% |
1 |
0.30% |
| Al Viro |
30 |
0.72% |
2 |
0.61% |
| Madalin Bucur |
28 |
0.67% |
1 |
0.30% |
| Stephen Hemminger |
28 |
0.67% |
2 |
0.61% |
| Lei Ming |
27 |
0.65% |
1 |
0.30% |
| Benjamin Herrenschmidt |
26 |
0.62% |
2 |
0.61% |
| Andrew Morton |
26 |
0.62% |
4 |
1.22% |
| Joerg Roedel |
25 |
0.60% |
2 |
0.61% |
| Himangi Saraogi |
24 |
0.57% |
1 |
0.30% |
| Sudeep Holla |
24 |
0.57% |
1 |
0.30% |
| Peter Zijlstra |
21 |
0.50% |
2 |
0.61% |
| Oliver Neukum |
21 |
0.50% |
1 |
0.30% |
| Andi Kleen |
21 |
0.50% |
1 |
0.30% |
| Ming Lei |
20 |
0.48% |
1 |
0.30% |
| Konrad Rzeszutek Wilk |
20 |
0.48% |
1 |
0.30% |
| Stephen Rothwell |
20 |
0.48% |
2 |
0.61% |
| FUJITA Tomonori |
19 |
0.45% |
1 |
0.30% |
| Borislav Petkov |
19 |
0.45% |
1 |
0.30% |
| Eli Billauer |
18 |
0.43% |
1 |
0.30% |
| Heikki Krogerus |
16 |
0.38% |
1 |
0.30% |
| Petr Tesarik |
15 |
0.36% |
2 |
0.61% |
| Srinivas Pandruvada |
14 |
0.34% |
1 |
0.30% |
| Jean Delvare |
14 |
0.34% |
3 |
0.91% |
| Linus Torvalds (pre-git) |
14 |
0.34% |
4 |
1.22% |
| James Seo |
13 |
0.31% |
1 |
0.30% |
| Andreas Gruenbacher |
12 |
0.29% |
1 |
0.30% |
| Linus Walleij |
12 |
0.29% |
1 |
0.30% |
| Paul Mundt |
12 |
0.29% |
1 |
0.30% |
| Magnus Damm |
12 |
0.29% |
1 |
0.30% |
| Thierry Reding |
11 |
0.26% |
1 |
0.30% |
| Alexander Lobakin |
11 |
0.26% |
2 |
0.61% |
| Marek Szyprowski |
11 |
0.26% |
2 |
0.61% |
| Manish Badarkhe |
10 |
0.24% |
1 |
0.30% |
| Yani Ioannou |
10 |
0.24% |
1 |
0.30% |
| Daniel Ritz |
10 |
0.24% |
1 |
0.30% |
| Lukasz Luba |
10 |
0.24% |
1 |
0.30% |
| Johan Hovold |
10 |
0.24% |
1 |
0.30% |
| Claire Chang |
10 |
0.24% |
1 |
0.30% |
| Matthew Wilcox |
9 |
0.22% |
3 |
0.91% |
| Christian Brauner |
9 |
0.22% |
1 |
0.30% |
| Wolfram Sang |
9 |
0.22% |
1 |
0.30% |
| Alex Williamson |
8 |
0.19% |
1 |
0.30% |
| Rusty Russell |
8 |
0.19% |
2 |
0.61% |
| Jason Gunthorpe |
7 |
0.17% |
1 |
0.30% |
| Jesse Barnes |
7 |
0.17% |
1 |
0.30% |
| Lukas Wunner |
7 |
0.17% |
1 |
0.30% |
| pascal paillet |
7 |
0.17% |
1 |
0.30% |
| Phil Carmody |
5 |
0.12% |
2 |
0.61% |
| Ioana Ciornei |
5 |
0.12% |
1 |
0.30% |
| Vivek Gautam |
5 |
0.12% |
2 |
0.61% |
| Paul Gortmaker |
5 |
0.12% |
2 |
0.61% |
| Jacob jun Pan |
5 |
0.12% |
1 |
0.30% |
| Deepak Saxena |
5 |
0.12% |
1 |
0.30% |
| Max Filippov |
5 |
0.12% |
1 |
0.30% |
| Guenter Roeck |
5 |
0.12% |
1 |
0.30% |
| Jim Quinlan |
5 |
0.12% |
1 |
0.30% |
| Grant C. Likely |
4 |
0.10% |
2 |
0.61% |
| Jianxiong Gao |
4 |
0.10% |
1 |
0.30% |
| Masahiro Yamada |
4 |
0.10% |
1 |
0.30% |
| Alexander Nyberg |
4 |
0.10% |
1 |
0.30% |
| Michael Holzheu |
4 |
0.10% |
1 |
0.30% |
| Christophe Leroy |
4 |
0.10% |
1 |
0.30% |
| Tomeu Vizoso |
3 |
0.07% |
1 |
0.30% |
| Quentin Perret |
3 |
0.07% |
1 |
0.30% |
| Lars-Peter Clausen |
3 |
0.07% |
1 |
0.30% |
| Herve Codina |
2 |
0.05% |
1 |
0.30% |
| Bryan O'Sullivan |
2 |
0.05% |
1 |
0.30% |
| Robin Murphy |
2 |
0.05% |
1 |
0.30% |
| Dominik Brodowski |
2 |
0.05% |
1 |
0.30% |
| Matt Domsch |
2 |
0.05% |
1 |
0.30% |
| Vojtech Pavlik |
2 |
0.05% |
1 |
0.30% |
| Nicolas Saenz Julienne |
2 |
0.05% |
1 |
0.30% |
| Arnd Bergmann |
2 |
0.05% |
1 |
0.30% |
| Bhaskar Chowdhury |
1 |
0.02% |
1 |
0.30% |
| Toshi Kani |
1 |
0.02% |
1 |
0.30% |
| Johannes Berg |
1 |
0.02% |
1 |
0.30% |
| Suzuki K. Poulose |
1 |
0.02% |
1 |
0.30% |
| Johann Deneux |
1 |
0.02% |
1 |
0.30% |
| Michael Davidson |
1 |
0.02% |
1 |
0.30% |
| Arend Van Spriel |
1 |
0.02% |
1 |
0.30% |
| Mika Westerberg |
1 |
0.02% |
1 |
0.30% |
| Mauro Carvalho Chehab |
1 |
0.02% |
1 |
0.30% |
| Arun Sharma |
1 |
0.02% |
1 |
0.30% |
| Anshuman Khandual |
1 |
0.02% |
1 |
0.30% |
| Eric Moore |
1 |
0.02% |
1 |
0.30% |
| Viresh Kumar |
1 |
0.02% |
1 |
0.30% |
| Wanlong Gao |
1 |
0.02% |
1 |
0.30% |
| Rytchkov Alexey |
1 |
0.02% |
1 |
0.30% |
| Bart Van Assche |
1 |
0.02% |
1 |
0.30% |
| Santosh Shilimkar |
1 |
0.02% |
1 |
0.30% |
| Daniel E. F. Stekloff |
1 |
0.02% |
1 |
0.30% |
| David Engraf |
1 |
0.02% |
1 |
0.30% |
| Total |
4178 |
|
329 |
|
// SPDX-License-Identifier: GPL-2.0
/*
* device.h - generic, centralized driver model
*
* Copyright (c) 2001-2003 Patrick Mochel <mochel@osdl.org>
* Copyright (c) 2004-2009 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (c) 2008-2009 Novell Inc.
*
* See Documentation/driver-api/driver-model/ for more information.
*/
#ifndef _DEVICE_H_
#define _DEVICE_H_
#include <linux/dev_printk.h>
#include <linux/energy_model.h>
#include <linux/ioport.h>
#include <linux/kobject.h>
#include <linux/klist.h>
#include <linux/list.h>
#include <linux/lockdep.h>
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/atomic.h>
#include <linux/uidgid.h>
#include <linux/gfp.h>
#include <linux/overflow.h>
#include <linux/device/bus.h>
#include <linux/device/class.h>
#include <linux/device/driver.h>
#include <linux/cleanup.h>
#include <asm/device.h>
struct device;
struct device_private;
struct device_driver;
struct driver_private;
struct module;
struct class;
struct subsys_private;
struct device_node;
struct fwnode_handle;
struct iommu_group;
struct dev_pin_info;
struct dev_iommu;
struct msi_device_data;
/**
* struct subsys_interface - interfaces to device functions
* @name: name of the device function
* @subsys: subsystem of the devices to attach to
* @node: the list of functions registered at the subsystem
* @add_dev: device hookup to device function handler
* @remove_dev: device hookup to device function handler
*
* Simple interfaces attached to a subsystem. Multiple interfaces can
* attach to a subsystem and its devices. Unlike drivers, they do not
* exclusively claim or control devices. Interfaces usually represent
* a specific functionality of a subsystem/class of devices.
*/
struct subsys_interface {
const char *name;
const struct bus_type *subsys;
struct list_head node;
int (*add_dev)(struct device *dev, struct subsys_interface *sif);
void (*remove_dev)(struct device *dev, struct subsys_interface *sif);
};
int subsys_interface_register(struct subsys_interface *sif);
void subsys_interface_unregister(struct subsys_interface *sif);
int subsys_system_register(const struct bus_type *subsys,
const struct attribute_group **groups);
int subsys_virtual_register(const struct bus_type *subsys,
const struct attribute_group **groups);
/*
* The type of device, "struct device" is embedded in. A class
* or bus can contain devices of different types
* like "partitions" and "disks", "mouse" and "event".
* This identifies the device type and carries type-specific
* information, equivalent to the kobj_type of a kobject.
* If "name" is specified, the uevent will contain it in
* the DEVTYPE variable.
*/
struct device_type {
const char *name;
const struct attribute_group **groups;
int (*uevent)(const struct device *dev, struct kobj_uevent_env *env);
char *(*devnode)(const struct device *dev, umode_t *mode,
kuid_t *uid, kgid_t *gid);
void (*release)(struct device *dev);
const struct dev_pm_ops *pm;
};
/**
* struct device_attribute - Interface for exporting device attributes.
* @attr: sysfs attribute definition.
* @show: Show handler.
* @store: Store handler.
*/
struct device_attribute {
struct attribute attr;
ssize_t (*show)(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t (*store)(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
};
/**
* struct dev_ext_attribute - Exported device attribute with extra context.
* @attr: Exported device attribute.
* @var: Pointer to context.
*/
struct dev_ext_attribute {
struct device_attribute attr;
void *var;
};
ssize_t device_show_ulong(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t device_store_ulong(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
ssize_t device_show_int(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t device_store_int(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
ssize_t device_show_bool(struct device *dev, struct device_attribute *attr,
char *buf);
ssize_t device_store_bool(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count);
ssize_t device_show_string(struct device *dev, struct device_attribute *attr,
char *buf);
/**
* DEVICE_ATTR - Define a device attribute.
* @_name: Attribute name.
* @_mode: File mode.
* @_show: Show handler. Optional, but mandatory if attribute is readable.
* @_store: Store handler. Optional, but mandatory if attribute is writable.
*
* Convenience macro for defining a struct device_attribute.
*
* For example, ``DEVICE_ATTR(foo, 0644, foo_show, foo_store);`` expands to:
*
* .. code-block:: c
*
* struct device_attribute dev_attr_foo = {
* .attr = { .name = "foo", .mode = 0644 },
* .show = foo_show,
* .store = foo_store,
* };
*/
#define DEVICE_ATTR(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
/**
* DEVICE_ATTR_PREALLOC - Define a preallocated device attribute.
* @_name: Attribute name.
* @_mode: File mode.
* @_show: Show handler. Optional, but mandatory if attribute is readable.
* @_store: Store handler. Optional, but mandatory if attribute is writable.
*
* Like DEVICE_ATTR(), but ``SYSFS_PREALLOC`` is set on @_mode.
*/
#define DEVICE_ATTR_PREALLOC(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = \
__ATTR_PREALLOC(_name, _mode, _show, _store)
/**
* DEVICE_ATTR_RW - Define a read-write device attribute.
* @_name: Attribute name.
*
* Like DEVICE_ATTR(), but @_mode is 0644, @_show is <_name>_show,
* and @_store is <_name>_store.
*/
#define DEVICE_ATTR_RW(_name) \
struct device_attribute dev_attr_##_name = __ATTR_RW(_name)
/**
* DEVICE_ATTR_ADMIN_RW - Define an admin-only read-write device attribute.
* @_name: Attribute name.
*
* Like DEVICE_ATTR_RW(), but @_mode is 0600.
*/
#define DEVICE_ATTR_ADMIN_RW(_name) \
struct device_attribute dev_attr_##_name = __ATTR_RW_MODE(_name, 0600)
/**
* DEVICE_ATTR_RO - Define a readable device attribute.
* @_name: Attribute name.
*
* Like DEVICE_ATTR(), but @_mode is 0444 and @_show is <_name>_show.
*/
#define DEVICE_ATTR_RO(_name) \
struct device_attribute dev_attr_##_name = __ATTR_RO(_name)
/**
* DEVICE_ATTR_ADMIN_RO - Define an admin-only readable device attribute.
* @_name: Attribute name.
*
* Like DEVICE_ATTR_RO(), but @_mode is 0400.
*/
#define DEVICE_ATTR_ADMIN_RO(_name) \
struct device_attribute dev_attr_##_name = __ATTR_RO_MODE(_name, 0400)
/**
* DEVICE_ATTR_WO - Define an admin-only writable device attribute.
* @_name: Attribute name.
*
* Like DEVICE_ATTR(), but @_mode is 0200 and @_store is <_name>_store.
*/
#define DEVICE_ATTR_WO(_name) \
struct device_attribute dev_attr_##_name = __ATTR_WO(_name)
/**
* DEVICE_ULONG_ATTR - Define a device attribute backed by an unsigned long.
* @_name: Attribute name.
* @_mode: File mode.
* @_var: Identifier of unsigned long.
*
* Like DEVICE_ATTR(), but @_show and @_store are automatically provided
* such that reads and writes to the attribute from userspace affect @_var.
*/
#define DEVICE_ULONG_ATTR(_name, _mode, _var) \
struct dev_ext_attribute dev_attr_##_name = \
{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
/**
* DEVICE_INT_ATTR - Define a device attribute backed by an int.
* @_name: Attribute name.
* @_mode: File mode.
* @_var: Identifier of int.
*
* Like DEVICE_ULONG_ATTR(), but @_var is an int.
*/
#define DEVICE_INT_ATTR(_name, _mode, _var) \
struct dev_ext_attribute dev_attr_##_name = \
{ __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) }
/**
* DEVICE_BOOL_ATTR - Define a device attribute backed by a bool.
* @_name: Attribute name.
* @_mode: File mode.
* @_var: Identifier of bool.
*
* Like DEVICE_ULONG_ATTR(), but @_var is a bool.
*/
#define DEVICE_BOOL_ATTR(_name, _mode, _var) \
struct dev_ext_attribute dev_attr_##_name = \
{ __ATTR(_name, _mode, device_show_bool, device_store_bool), &(_var) }
/**
* DEVICE_STRING_ATTR_RO - Define a device attribute backed by a r/o string.
* @_name: Attribute name.
* @_mode: File mode.
* @_var: Identifier of string.
*
* Like DEVICE_ULONG_ATTR(), but @_var is a string. Because the length of the
* string allocation is unknown, the attribute must be read-only.
*/
#define DEVICE_STRING_ATTR_RO(_name, _mode, _var) \
struct dev_ext_attribute dev_attr_##_name = \
{ __ATTR(_name, (_mode) & ~0222, device_show_string, NULL), (_var) }
#define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \
struct device_attribute dev_attr_##_name = \
__ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)
int device_create_file(struct device *device,
const struct device_attribute *entry);
void device_remove_file(struct device *dev,
const struct device_attribute *attr);
bool device_remove_file_self(struct device *dev,
const struct device_attribute *attr);
int __must_check device_create_bin_file(struct device *dev,
const struct bin_attribute *attr);
void device_remove_bin_file(struct device *dev,
const struct bin_attribute *attr);
/* device resource management */
typedef void (*dr_release_t)(struct device *dev, void *res);
typedef int (*dr_match_t)(struct device *dev, void *res, void *match_data);
void *__devres_alloc_node(dr_release_t release, size_t size, gfp_t gfp,
int nid, const char *name) __malloc;
#define devres_alloc(release, size, gfp) \
__devres_alloc_node(release, size, gfp, NUMA_NO_NODE, #release)
#define devres_alloc_node(release, size, gfp, nid) \
__devres_alloc_node(release, size, gfp, nid, #release)
void devres_for_each_res(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data,
void (*fn)(struct device *, void *, void *),
void *data);
void devres_free(void *res);
void devres_add(struct device *dev, void *res);
void *devres_find(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
void *devres_get(struct device *dev, void *new_res,
dr_match_t match, void *match_data);
void *devres_remove(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
int devres_destroy(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
int devres_release(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
/* devres group */
void * __must_check devres_open_group(struct device *dev, void *id, gfp_t gfp);
void devres_close_group(struct device *dev, void *id);
void devres_remove_group(struct device *dev, void *id);
int devres_release_group(struct device *dev, void *id);
/* managed devm_k.alloc/kfree for device drivers */
void *devm_kmalloc(struct device *dev, size_t size, gfp_t gfp) __alloc_size(2);
void *devm_krealloc(struct device *dev, void *ptr, size_t size,
gfp_t gfp) __must_check __realloc_size(3);
__printf(3, 0) char *devm_kvasprintf(struct device *dev, gfp_t gfp,
const char *fmt, va_list ap) __malloc;
__printf(3, 4) char *devm_kasprintf(struct device *dev, gfp_t gfp,
const char *fmt, ...) __malloc;
static inline void *devm_kzalloc(struct device *dev, size_t size, gfp_t gfp)
{
return devm_kmalloc(dev, size, gfp | __GFP_ZERO);
}
static inline void *devm_kmalloc_array(struct device *dev,
size_t n, size_t size, gfp_t flags)
{
size_t bytes;
if (unlikely(check_mul_overflow(n, size, &bytes)))
return NULL;
return devm_kmalloc(dev, bytes, flags);
}
static inline void *devm_kcalloc(struct device *dev,
size_t n, size_t size, gfp_t flags)
{
return devm_kmalloc_array(dev, n, size, flags | __GFP_ZERO);
}
static inline __realloc_size(3, 4) void * __must_check
devm_krealloc_array(struct device *dev, void *p, size_t new_n, size_t new_size, gfp_t flags)
{
size_t bytes;
if (unlikely(check_mul_overflow(new_n, new_size, &bytes)))
return NULL;
return devm_krealloc(dev, p, bytes, flags);
}
void devm_kfree(struct device *dev, const void *p);
char *devm_kstrdup(struct device *dev, const char *s, gfp_t gfp) __malloc;
const char *devm_kstrdup_const(struct device *dev, const char *s, gfp_t gfp);
void *devm_kmemdup(struct device *dev, const void *src, size_t len, gfp_t gfp)
__realloc_size(3);
unsigned long devm_get_free_pages(struct device *dev,
gfp_t gfp_mask, unsigned int order);
void devm_free_pages(struct device *dev, unsigned long addr);
#ifdef CONFIG_HAS_IOMEM
void __iomem *devm_ioremap_resource(struct device *dev,
const struct resource *res);
void __iomem *devm_ioremap_resource_wc(struct device *dev,
const struct resource *res);
void __iomem *devm_of_iomap(struct device *dev,
struct device_node *node, int index,
resource_size_t *size);
#else
static inline
void __iomem *devm_ioremap_resource(struct device *dev,
const struct resource *res)
{
return ERR_PTR(-EINVAL);
}
static inline
void __iomem *devm_ioremap_resource_wc(struct device *dev,
const struct resource *res)
{
return ERR_PTR(-EINVAL);
}
static inline
void __iomem *devm_of_iomap(struct device *dev,
struct device_node *node, int index,
resource_size_t *size)
{
return ERR_PTR(-EINVAL);
}
#endif
/* allows to add/remove a custom action to devres stack */
void devm_remove_action(struct device *dev, void (*action)(void *), void *data);
void devm_release_action(struct device *dev, void (*action)(void *), void *data);
int __devm_add_action(struct device *dev, void (*action)(void *), void *data, const char *name);
#define devm_add_action(dev, action, data) \
__devm_add_action(dev, action, data, #action)
static inline int __devm_add_action_or_reset(struct device *dev, void (*action)(void *),
void *data, const char *name)
{
int ret;
ret = __devm_add_action(dev, action, data, name);
if (ret)
action(data);
return ret;
}
#define devm_add_action_or_reset(dev, action, data) \
__devm_add_action_or_reset(dev, action, data, #action)
/**
* devm_alloc_percpu - Resource-managed alloc_percpu
* @dev: Device to allocate per-cpu memory for
* @type: Type to allocate per-cpu memory for
*
* Managed alloc_percpu. Per-cpu memory allocated with this function is
* automatically freed on driver detach.
*
* RETURNS:
* Pointer to allocated memory on success, NULL on failure.
*/
#define devm_alloc_percpu(dev, type) \
((typeof(type) __percpu *)__devm_alloc_percpu((dev), sizeof(type), \
__alignof__(type)))
void __percpu *__devm_alloc_percpu(struct device *dev, size_t size,
size_t align);
void devm_free_percpu(struct device *dev, void __percpu *pdata);
struct device_dma_parameters {
/*
* a low level driver may set these to teach IOMMU code about
* sg limitations.
*/
unsigned int max_segment_size;
unsigned int min_align_mask;
unsigned long segment_boundary_mask;
};
/**
* enum device_link_state - Device link states.
* @DL_STATE_NONE: The presence of the drivers is not being tracked.
* @DL_STATE_DORMANT: None of the supplier/consumer drivers is present.
* @DL_STATE_AVAILABLE: The supplier driver is present, but the consumer is not.
* @DL_STATE_CONSUMER_PROBE: The consumer is probing (supplier driver present).
* @DL_STATE_ACTIVE: Both the supplier and consumer drivers are present.
* @DL_STATE_SUPPLIER_UNBIND: The supplier driver is unbinding.
*/
enum device_link_state {
DL_STATE_NONE = -1,
DL_STATE_DORMANT = 0,
DL_STATE_AVAILABLE,
DL_STATE_CONSUMER_PROBE,
DL_STATE_ACTIVE,
DL_STATE_SUPPLIER_UNBIND,
};
/*
* Device link flags.
*
* STATELESS: The core will not remove this link automatically.
* AUTOREMOVE_CONSUMER: Remove the link automatically on consumer driver unbind.
* PM_RUNTIME: If set, the runtime PM framework will use this link.
* RPM_ACTIVE: Run pm_runtime_get_sync() on the supplier during link creation.
* AUTOREMOVE_SUPPLIER: Remove the link automatically on supplier driver unbind.
* AUTOPROBE_CONSUMER: Probe consumer driver automatically after supplier binds.
* MANAGED: The core tracks presence of supplier/consumer drivers (internal).
* SYNC_STATE_ONLY: Link only affects sync_state() behavior.
* INFERRED: Inferred from data (eg: firmware) and not from driver actions.
*/
#define DL_FLAG_STATELESS BIT(0)
#define DL_FLAG_AUTOREMOVE_CONSUMER BIT(1)
#define DL_FLAG_PM_RUNTIME BIT(2)
#define DL_FLAG_RPM_ACTIVE BIT(3)
#define DL_FLAG_AUTOREMOVE_SUPPLIER BIT(4)
#define DL_FLAG_AUTOPROBE_CONSUMER BIT(5)
#define DL_FLAG_MANAGED BIT(6)
#define DL_FLAG_SYNC_STATE_ONLY BIT(7)
#define DL_FLAG_INFERRED BIT(8)
#define DL_FLAG_CYCLE BIT(9)
/**
* enum dl_dev_state - Device driver presence tracking information.
* @DL_DEV_NO_DRIVER: There is no driver attached to the device.
* @DL_DEV_PROBING: A driver is probing.
* @DL_DEV_DRIVER_BOUND: The driver has been bound to the device.
* @DL_DEV_UNBINDING: The driver is unbinding from the device.
*/
enum dl_dev_state {
DL_DEV_NO_DRIVER = 0,
DL_DEV_PROBING,
DL_DEV_DRIVER_BOUND,
DL_DEV_UNBINDING,
};
/**
* enum device_removable - Whether the device is removable. The criteria for a
* device to be classified as removable is determined by its subsystem or bus.
* @DEVICE_REMOVABLE_NOT_SUPPORTED: This attribute is not supported for this
* device (default).
* @DEVICE_REMOVABLE_UNKNOWN: Device location is Unknown.
* @DEVICE_FIXED: Device is not removable by the user.
* @DEVICE_REMOVABLE: Device is removable by the user.
*/
enum device_removable {
DEVICE_REMOVABLE_NOT_SUPPORTED = 0, /* must be 0 */
DEVICE_REMOVABLE_UNKNOWN,
DEVICE_FIXED,
DEVICE_REMOVABLE,
};
/**
* struct dev_links_info - Device data related to device links.
* @suppliers: List of links to supplier devices.
* @consumers: List of links to consumer devices.
* @defer_sync: Hook to global list of devices that have deferred sync_state.
* @status: Driver status information.
*/
struct dev_links_info {
struct list_head suppliers;
struct list_head consumers;
struct list_head defer_sync;
enum dl_dev_state status;
};
/**
* struct dev_msi_info - Device data related to MSI
* @domain: The MSI interrupt domain associated to the device
* @data: Pointer to MSI device data
*/
struct dev_msi_info {
#ifdef CONFIG_GENERIC_MSI_IRQ
struct irq_domain *domain;
struct msi_device_data *data;
#endif
};
/**
* enum device_physical_location_panel - Describes which panel surface of the
* system's housing the device connection point resides on.
* @DEVICE_PANEL_TOP: Device connection point is on the top panel.
* @DEVICE_PANEL_BOTTOM: Device connection point is on the bottom panel.
* @DEVICE_PANEL_LEFT: Device connection point is on the left panel.
* @DEVICE_PANEL_RIGHT: Device connection point is on the right panel.
* @DEVICE_PANEL_FRONT: Device connection point is on the front panel.
* @DEVICE_PANEL_BACK: Device connection point is on the back panel.
* @DEVICE_PANEL_UNKNOWN: The panel with device connection point is unknown.
*/
enum device_physical_location_panel {
DEVICE_PANEL_TOP,
DEVICE_PANEL_BOTTOM,
DEVICE_PANEL_LEFT,
DEVICE_PANEL_RIGHT,
DEVICE_PANEL_FRONT,
DEVICE_PANEL_BACK,
DEVICE_PANEL_UNKNOWN,
};
/**
* enum device_physical_location_vertical_position - Describes vertical
* position of the device connection point on the panel surface.
* @DEVICE_VERT_POS_UPPER: Device connection point is at upper part of panel.
* @DEVICE_VERT_POS_CENTER: Device connection point is at center part of panel.
* @DEVICE_VERT_POS_LOWER: Device connection point is at lower part of panel.
*/
enum device_physical_location_vertical_position {
DEVICE_VERT_POS_UPPER,
DEVICE_VERT_POS_CENTER,
DEVICE_VERT_POS_LOWER,
};
/**
* enum device_physical_location_horizontal_position - Describes horizontal
* position of the device connection point on the panel surface.
* @DEVICE_HORI_POS_LEFT: Device connection point is at left part of panel.
* @DEVICE_HORI_POS_CENTER: Device connection point is at center part of panel.
* @DEVICE_HORI_POS_RIGHT: Device connection point is at right part of panel.
*/
enum device_physical_location_horizontal_position {
DEVICE_HORI_POS_LEFT,
DEVICE_HORI_POS_CENTER,
DEVICE_HORI_POS_RIGHT,
};
/**
* struct device_physical_location - Device data related to physical location
* of the device connection point.
* @panel: Panel surface of the system's housing that the device connection
* point resides on.
* @vertical_position: Vertical position of the device connection point within
* the panel.
* @horizontal_position: Horizontal position of the device connection point
* within the panel.
* @dock: Set if the device connection point resides in a docking station or
* port replicator.
* @lid: Set if this device connection point resides on the lid of laptop
* system.
*/
struct device_physical_location {
enum device_physical_location_panel panel;
enum device_physical_location_vertical_position vertical_position;
enum device_physical_location_horizontal_position horizontal_position;
bool dock;
bool lid;
};
/**
* struct device - The basic device structure
* @parent: The device's "parent" device, the device to which it is attached.
* In most cases, a parent device is some sort of bus or host
* controller. If parent is NULL, the device, is a top-level device,
* which is not usually what you want.
* @p: Holds the private data of the driver core portions of the device.
* See the comment of the struct device_private for detail.
* @kobj: A top-level, abstract class from which other classes are derived.
* @init_name: Initial name of the device.
* @type: The type of device.
* This identifies the device type and carries type-specific
* information.
* @mutex: Mutex to synchronize calls to its driver.
* @bus: Type of bus device is on.
* @driver: Which driver has allocated this
* @platform_data: Platform data specific to the device.
* Example: For devices on custom boards, as typical of embedded
* and SOC based hardware, Linux often uses platform_data to point
* to board-specific structures describing devices and how they
* are wired. That can include what ports are available, chip
* variants, which GPIO pins act in what additional roles, and so
* on. This shrinks the "Board Support Packages" (BSPs) and
* minimizes board-specific #ifdefs in drivers.
* @driver_data: Private pointer for driver specific info.
* @links: Links to suppliers and consumers of this device.
* @power: For device power management.
* See Documentation/driver-api/pm/devices.rst for details.
* @pm_domain: Provide callbacks that are executed during system suspend,
* hibernation, system resume and during runtime PM transitions
* along with subsystem-level and driver-level callbacks.
* @em_pd: device's energy model performance domain
* @pins: For device pin management.
* See Documentation/driver-api/pin-control.rst for details.
* @msi: MSI related data
* @numa_node: NUMA node this device is close to.
* @dma_ops: DMA mapping operations for this device.
* @dma_mask: Dma mask (if dma'ble device).
* @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
* hardware supports 64-bit addresses for consistent allocations
* such descriptors.
* @bus_dma_limit: Limit of an upstream bridge or bus which imposes a smaller
* DMA limit than the device itself supports.
* @dma_range_map: map for DMA memory ranges relative to that of RAM
* @dma_parms: A low level driver may set these to teach IOMMU code about
* segment limitations.
* @dma_pools: Dma pools (if dma'ble device).
* @dma_mem: Internal for coherent mem override.
* @cma_area: Contiguous memory area for dma allocations
* @dma_io_tlb_mem: Software IO TLB allocator. Not for driver use.
* @dma_io_tlb_pools: List of transient swiotlb memory pools.
* @dma_io_tlb_lock: Protects changes to the list of active pools.
* @dma_uses_io_tlb: %true if device has used the software IO TLB.
* @archdata: For arch-specific additions.
* @of_node: Associated device tree node.
* @fwnode: Associated device node supplied by platform firmware.
* @devt: For creating the sysfs "dev".
* @id: device instance
* @devres_lock: Spinlock to protect the resource of the device.
* @devres_head: The resources list of the device.
* @class: The class of the device.
* @groups: Optional attribute groups.
* @release: Callback to free the device after all references have
* gone away. This should be set by the allocator of the
* device (i.e. the bus driver that discovered the device).
* @iommu_group: IOMMU group the device belongs to.
* @iommu: Per device generic IOMMU runtime data
* @physical_location: Describes physical location of the device connection
* point in the system housing.
* @removable: Whether the device can be removed from the system. This
* should be set by the subsystem / bus driver that discovered
* the device.
*
* @offline_disabled: If set, the device is permanently online.
* @offline: Set after successful invocation of bus type's .offline().
* @of_node_reused: Set if the device-tree node is shared with an ancestor
* device.
* @state_synced: The hardware state of this device has been synced to match
* the software state of this device by calling the driver/bus
* sync_state() callback.
* @can_match: The device has matched with a driver at least once or it is in
* a bus (like AMBA) which can't check for matching drivers until
* other devices probe successfully.
* @dma_coherent: this particular device is dma coherent, even if the
* architecture supports non-coherent devices.
* @dma_ops_bypass: If set to %true then the dma_ops are bypassed for the
* streaming DMA operations (->map_* / ->unmap_* / ->sync_*),
* and optionall (if the coherent mask is large enough) also
* for dma allocations. This flag is managed by the dma ops
* instance from ->dma_supported.
* @dma_skip_sync: DMA sync operations can be skipped for coherent buffers.
*
* At the lowest level, every device in a Linux system is represented by an
* instance of struct device. The device structure contains the information
* that the device model core needs to model the system. Most subsystems,
* however, track additional information about the devices they host. As a
* result, it is rare for devices to be represented by bare device structures;
* instead, that structure, like kobject structures, is usually embedded within
* a higher-level representation of the device.
*/
struct device {
struct kobject kobj;
struct device *parent;
struct device_private *p;
const char *init_name; /* initial name of the device */
const struct device_type *type;
const struct bus_type *bus; /* type of bus device is on */
struct device_driver *driver; /* which driver has allocated this
device */
void *platform_data; /* Platform specific data, device
core doesn't touch it */
void *driver_data; /* Driver data, set and get with
dev_set_drvdata/dev_get_drvdata */
struct mutex mutex; /* mutex to synchronize calls to
* its driver.
*/
struct dev_links_info links;
struct dev_pm_info power;
struct dev_pm_domain *pm_domain;
#ifdef CONFIG_ENERGY_MODEL
struct em_perf_domain *em_pd;
#endif
#ifdef CONFIG_PINCTRL
struct dev_pin_info *pins;
#endif
struct dev_msi_info msi;
#ifdef CONFIG_DMA_OPS
const struct dma_map_ops *dma_ops;
#endif
u64 *dma_mask; /* dma mask (if dma'able device) */
u64 coherent_dma_mask;/* Like dma_mask, but for
alloc_coherent mappings as
not all hardware supports
64 bit addresses for consistent
allocations such descriptors. */
u64 bus_dma_limit; /* upstream dma constraint */
const struct bus_dma_region *dma_range_map;
struct device_dma_parameters *dma_parms;
struct list_head dma_pools; /* dma pools (if dma'ble) */
#ifdef CONFIG_DMA_DECLARE_COHERENT
struct dma_coherent_mem *dma_mem; /* internal for coherent mem
override */
#endif
#ifdef CONFIG_DMA_CMA
struct cma *cma_area; /* contiguous memory area for dma
allocations */
#endif
#ifdef CONFIG_SWIOTLB
struct io_tlb_mem *dma_io_tlb_mem;
#endif
#ifdef CONFIG_SWIOTLB_DYNAMIC
struct list_head dma_io_tlb_pools;
spinlock_t dma_io_tlb_lock;
bool dma_uses_io_tlb;
#endif
/* arch specific additions */
struct dev_archdata archdata;
struct device_node *of_node; /* associated device tree node */
struct fwnode_handle *fwnode; /* firmware device node */
#ifdef CONFIG_NUMA
int numa_node; /* NUMA node this device is close to */
#endif
dev_t devt; /* dev_t, creates the sysfs "dev" */
u32 id; /* device instance */
spinlock_t devres_lock;
struct list_head devres_head;
const struct class *class;
const struct attribute_group **groups; /* optional groups */
void (*release)(struct device *dev);
struct iommu_group *iommu_group;
struct dev_iommu *iommu;
struct device_physical_location *physical_location;
enum device_removable removable;
bool offline_disabled:1;
bool offline:1;
bool of_node_reused:1;
bool state_synced:1;
bool can_match:1;
#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE) || \
defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
bool dma_coherent:1;
#endif
#ifdef CONFIG_DMA_OPS_BYPASS
bool dma_ops_bypass : 1;
#endif
#ifdef CONFIG_DMA_NEED_SYNC
bool dma_skip_sync:1;
#endif
};
/**
* struct device_link - Device link representation.
* @supplier: The device on the supplier end of the link.
* @s_node: Hook to the supplier device's list of links to consumers.
* @consumer: The device on the consumer end of the link.
* @c_node: Hook to the consumer device's list of links to suppliers.
* @link_dev: device used to expose link details in sysfs
* @status: The state of the link (with respect to the presence of drivers).
* @flags: Link flags.
* @rpm_active: Whether or not the consumer device is runtime-PM-active.
* @kref: Count repeated addition of the same link.
* @rm_work: Work structure used for removing the link.
* @supplier_preactivated: Supplier has been made active before consumer probe.
*/
struct device_link {
struct device *supplier;
struct list_head s_node;
struct device *consumer;
struct list_head c_node;
struct device link_dev;
enum device_link_state status;
u32 flags;
refcount_t rpm_active;
struct kref kref;
struct work_struct rm_work;
bool supplier_preactivated; /* Owned by consumer probe. */
};
#define kobj_to_dev(__kobj) container_of_const(__kobj, struct device, kobj)
/**
* device_iommu_mapped - Returns true when the device DMA is translated
* by an IOMMU
* @dev: Device to perform the check on
*/
static inline bool device_iommu_mapped(struct device *dev)
{
return (dev->iommu_group != NULL);
}
/* Get the wakeup routines, which depend on struct device */
#include <linux/pm_wakeup.h>
/**
* dev_name - Return a device's name.
* @dev: Device with name to get.
* Return: The kobject name of the device, or its initial name if unavailable.
*/
static inline const char *dev_name(const struct device *dev)
{
/* Use the init name until the kobject becomes available */
if (dev->init_name)
return dev->init_name;
return kobject_name(&dev->kobj);
}
/**
* dev_bus_name - Return a device's bus/class name, if at all possible
* @dev: struct device to get the bus/class name of
*
* Will return the name of the bus/class the device is attached to. If it is
* not attached to a bus/class, an empty string will be returned.
*/
static inline const char *dev_bus_name(const struct device *dev)
{
return dev->bus ? dev->bus->name : (dev->class ? dev->class->name : "");
}
__printf(2, 3) int dev_set_name(struct device *dev, const char *name, ...);
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
return dev->numa_node;
}
static inline void set_dev_node(struct device *dev, int node)
{
dev->numa_node = node;
}
#else
static inline int dev_to_node(struct device *dev)
{
return NUMA_NO_NODE;
}
static inline void set_dev_node(struct device *dev, int node)
{
}
#endif
static inline struct irq_domain *dev_get_msi_domain(const struct device *dev)
{
#ifdef CONFIG_GENERIC_MSI_IRQ
return dev->msi.domain;
#else
return NULL;
#endif
}
static inline void dev_set_msi_domain(struct device *dev, struct irq_domain *d)
{
#ifdef CONFIG_GENERIC_MSI_IRQ
dev->msi.domain = d;
#endif
}
static inline void *dev_get_drvdata(const struct device *dev)
{
return dev->driver_data;
}
static inline void dev_set_drvdata(struct device *dev, void *data)
{
dev->driver_data = data;
}
static inline struct pm_subsys_data *dev_to_psd(struct device *dev)
{
return dev ? dev->power.subsys_data : NULL;
}
static inline unsigned int dev_get_uevent_suppress(const struct device *dev)
{
return dev->kobj.uevent_suppress;
}
static inline void dev_set_uevent_suppress(struct device *dev, int val)
{
dev->kobj.uevent_suppress = val;
}
static inline int device_is_registered(struct device *dev)
{
return dev->kobj.state_in_sysfs;
}
static inline void device_enable_async_suspend(struct device *dev)
{
if (!dev->power.is_prepared)
dev->power.async_suspend = true;
}
static inline void device_disable_async_suspend(struct device *dev)
{
if (!dev->power.is_prepared)
dev->power.async_suspend = false;
}
static inline bool device_async_suspend_enabled(struct device *dev)
{
return !!dev->power.async_suspend;
}
static inline bool device_pm_not_required(struct device *dev)
{
return dev->power.no_pm;
}
static inline void device_set_pm_not_required(struct device *dev)
{
dev->power.no_pm = true;
}
static inline void dev_pm_syscore_device(struct device *dev, bool val)
{
#ifdef CONFIG_PM_SLEEP
dev->power.syscore = val;
#endif
}
static inline void dev_pm_set_driver_flags(struct device *dev, u32 flags)
{
dev->power.driver_flags = flags;
}
static inline bool dev_pm_test_driver_flags(struct device *dev, u32 flags)
{
return !!(dev->power.driver_flags & flags);
}
static inline void device_lock(struct device *dev)
{
mutex_lock(&dev->mutex);
}
static inline int device_lock_interruptible(struct device *dev)
{
return mutex_lock_interruptible(&dev->mutex);
}
static inline int device_trylock(struct device *dev)
{
return mutex_trylock(&dev->mutex);
}
static inline void device_unlock(struct device *dev)
{
mutex_unlock(&dev->mutex);
}
DEFINE_GUARD(device, struct device *, device_lock(_T), device_unlock(_T))
static inline void device_lock_assert(struct device *dev)
{
lockdep_assert_held(&dev->mutex);
}
static inline bool dev_has_sync_state(struct device *dev)
{
if (!dev)
return false;
if (dev->driver && dev->driver->sync_state)
return true;
if (dev->bus && dev->bus->sync_state)
return true;
return false;
}
static inline void dev_set_removable(struct device *dev,
enum device_removable removable)
{
dev->removable = removable;
}
static inline bool dev_is_removable(struct device *dev)
{
return dev->removable == DEVICE_REMOVABLE;
}
static inline bool dev_removable_is_valid(struct device *dev)
{
return dev->removable != DEVICE_REMOVABLE_NOT_SUPPORTED;
}
/*
* High level routines for use by the bus drivers
*/
int __must_check device_register(struct device *dev);
void device_unregister(struct device *dev);
void device_initialize(struct device *dev);
int __must_check device_add(struct device *dev);
void device_del(struct device *dev);
DEFINE_FREE(device_del, struct device *, if (_T) device_del(_T))
int device_for_each_child(struct device *dev, void *data,
int (*fn)(struct device *dev, void *data));
int device_for_each_child_reverse(struct device *dev, void *data,
int (*fn)(struct device *dev, void *data));
struct device *device_find_child(struct device *dev, void *data,
int (*match)(struct device *dev, void *data));
struct device *device_find_child_by_name(struct device *parent,
const char *name);
struct device *device_find_any_child(struct device *parent);
int device_rename(struct device *dev, const char *new_name);
int device_move(struct device *dev, struct device *new_parent,
enum dpm_order dpm_order);
int device_change_owner(struct device *dev, kuid_t kuid, kgid_t kgid);
static inline bool device_supports_offline(struct device *dev)
{
return dev->bus && dev->bus->offline && dev->bus->online;
}
#define __device_lock_set_class(dev, name, key) \
do { \
struct device *__d2 __maybe_unused = dev; \
lock_set_class(&__d2->mutex.dep_map, name, key, 0, _THIS_IP_); \
} while (0)
/**
* device_lock_set_class - Specify a temporary lock class while a device
* is attached to a driver
* @dev: device to modify
* @key: lock class key data
*
* This must be called with the device_lock() already held, for example
* from driver ->probe(). Take care to only override the default
* lockdep_no_validate class.
*/
#ifdef CONFIG_LOCKDEP
#define device_lock_set_class(dev, key) \
do { \
struct device *__d = dev; \
dev_WARN_ONCE(__d, !lockdep_match_class(&__d->mutex, \
&__lockdep_no_validate__), \
"overriding existing custom lock class\n"); \
__device_lock_set_class(__d, #key, key); \
} while (0)
#else
#define device_lock_set_class(dev, key) __device_lock_set_class(dev, #key, key)
#endif
/**
* device_lock_reset_class - Return a device to the default lockdep novalidate state
* @dev: device to modify
*
* This must be called with the device_lock() already held, for example
* from driver ->remove().
*/
#define device_lock_reset_class(dev) \
do { \
struct device *__d __maybe_unused = dev; \
lock_set_novalidate_class(&__d->mutex.dep_map, "&dev->mutex", \
_THIS_IP_); \
} while (0)
void lock_device_hotplug(void);
void unlock_device_hotplug(void);
int lock_device_hotplug_sysfs(void);
int device_offline(struct device *dev);
int device_online(struct device *dev);
void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode);
void device_set_node(struct device *dev, struct fwnode_handle *fwnode);
void device_set_of_node_from_dev(struct device *dev, const struct device *dev2);
static inline struct device_node *dev_of_node(struct device *dev)
{
if (!IS_ENABLED(CONFIG_OF) || !dev)
return NULL;
return dev->of_node;
}
static inline int dev_num_vf(struct device *dev)
{
if (dev->bus && dev->bus->num_vf)
return dev->bus->num_vf(dev);
return 0;
}
/*
* Root device objects for grouping under /sys/devices
*/
struct device *__root_device_register(const char *name, struct module *owner);
/* This is a macro to avoid include problems with THIS_MODULE */
#define root_device_register(name) \
__root_device_register(name, THIS_MODULE)
void root_device_unregister(struct device *root);
static inline void *dev_get_platdata(const struct device *dev)
{
return dev->platform_data;
}
/*
* Manual binding of a device to driver. See drivers/base/bus.c
* for information on use.
*/
int __must_check device_driver_attach(const struct device_driver *drv,
struct device *dev);
int __must_check device_bind_driver(struct device *dev);
void device_release_driver(struct device *dev);
int __must_check device_attach(struct device *dev);
int __must_check driver_attach(const struct device_driver *drv);
void device_initial_probe(struct device *dev);
int __must_check device_reprobe(struct device *dev);
bool device_is_bound(struct device *dev);
/*
* Easy functions for dynamically creating devices on the fly
*/
__printf(5, 6) struct device *
device_create(const struct class *cls, struct device *parent, dev_t devt,
void *drvdata, const char *fmt, ...);
__printf(6, 7) struct device *
device_create_with_groups(const struct class *cls, struct device *parent, dev_t devt,
void *drvdata, const struct attribute_group **groups,
const char *fmt, ...);
void device_destroy(const struct class *cls, dev_t devt);
int __must_check device_add_groups(struct device *dev,
const struct attribute_group **groups);
void device_remove_groups(struct device *dev,
const struct attribute_group **groups);
static inline int __must_check device_add_group(struct device *dev,
const struct attribute_group *grp)
{
const struct attribute_group *groups[] = { grp, NULL };
return device_add_groups(dev, groups);
}
static inline void device_remove_group(struct device *dev,
const struct attribute_group *grp)
{
const struct attribute_group *groups[] = { grp, NULL };
return device_remove_groups(dev, groups);
}
int __must_check devm_device_add_group(struct device *dev,
const struct attribute_group *grp);
/*
* get_device - atomically increment the reference count for the device.
*
*/
struct device *get_device(struct device *dev);
void put_device(struct device *dev);
DEFINE_FREE(put_device, struct device *, if (_T) put_device(_T))
bool kill_device(struct device *dev);
#ifdef CONFIG_DEVTMPFS
int devtmpfs_mount(void);
#else
static inline int devtmpfs_mount(void) { return 0; }
#endif
/* drivers/base/power/shutdown.c */
void device_shutdown(void);
/* debugging and troubleshooting/diagnostic helpers. */
const char *dev_driver_string(const struct device *dev);
/* Device links interface. */
struct device_link *device_link_add(struct device *consumer,
struct device *supplier, u32 flags);
void device_link_del(struct device_link *link);
void device_link_remove(void *consumer, struct device *supplier);
void device_links_supplier_sync_state_pause(void);
void device_links_supplier_sync_state_resume(void);
void device_link_wait_removal(void);
/* Create alias, so I can be autoloaded. */
#define MODULE_ALIAS_CHARDEV(major,minor) \
MODULE_ALIAS("char-major-" __stringify(major) "-" __stringify(minor))
#define MODULE_ALIAS_CHARDEV_MAJOR(major) \
MODULE_ALIAS("char-major-" __stringify(major) "-*")
#endif /* _DEVICE_H_ */