Contributors: 40
Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
Liam Girdwood |
1327 |
53.72% |
2 |
2.82% |
Charles Keepax |
204 |
8.26% |
2 |
2.82% |
Mark Brown |
197 |
7.98% |
18 |
25.35% |
Dmitry Osipenko |
64 |
2.59% |
2 |
2.82% |
Tuomas Tynkkynen |
61 |
2.47% |
1 |
1.41% |
Matti Vaittinen |
60 |
2.43% |
4 |
5.63% |
Shawn Guo |
58 |
2.35% |
1 |
1.41% |
Lee Jones |
51 |
2.06% |
2 |
2.82% |
Doug Anderson |
49 |
1.98% |
3 |
4.23% |
Stephen Boyd |
41 |
1.66% |
1 |
1.41% |
Bartosz Golaszewski |
39 |
1.58% |
2 |
2.82% |
Marek Vašut |
34 |
1.38% |
1 |
1.41% |
Axel Haslam |
34 |
1.38% |
1 |
1.41% |
Viresh Kumar |
32 |
1.30% |
2 |
2.82% |
Corentin Labbe |
26 |
1.05% |
1 |
1.41% |
David Lechner |
21 |
0.85% |
2 |
2.82% |
Tim Kryger |
18 |
0.73% |
1 |
1.41% |
Heiko Stübner |
18 |
0.73% |
1 |
1.41% |
Axel Lin |
16 |
0.65% |
2 |
2.82% |
Philip Rakity |
16 |
0.65% |
2 |
2.82% |
Biju Das |
13 |
0.53% |
1 |
1.41% |
Donggeun Kim |
12 |
0.49% |
1 |
1.41% |
David Brownell |
11 |
0.45% |
1 |
1.41% |
Linus Walleij |
10 |
0.40% |
1 |
1.41% |
Rajendra Nayak |
7 |
0.28% |
1 |
1.41% |
Arnd Bergmann |
7 |
0.28% |
1 |
1.41% |
Suzuki K. Poulose |
7 |
0.28% |
1 |
1.41% |
Paul Walmsley |
5 |
0.20% |
1 |
1.41% |
Christophe Jaillet |
4 |
0.16% |
1 |
1.41% |
MyungJoo Ham |
4 |
0.16% |
1 |
1.41% |
Zev Weiss |
4 |
0.16% |
1 |
1.41% |
Naresh Solanki |
3 |
0.12% |
1 |
1.41% |
Rusty Russell |
3 |
0.12% |
1 |
1.41% |
Russell King |
3 |
0.12% |
1 |
1.41% |
Guenter Roeck |
3 |
0.12% |
1 |
1.41% |
Thomas Gleixner |
2 |
0.08% |
1 |
1.41% |
Jean Delvare |
2 |
0.08% |
1 |
1.41% |
Björn Andersson |
2 |
0.08% |
1 |
1.41% |
Randy Dunlap |
1 |
0.04% |
1 |
1.41% |
Matthias Kaehlcke |
1 |
0.04% |
1 |
1.41% |
Total |
2470 |
|
71 |
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* consumer.h -- SoC Regulator consumer support.
*
* Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
*
* Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* Regulator Consumer Interface.
*
* A Power Management Regulator framework for SoC based devices.
* Features:-
* o Voltage and current level control.
* o Operating mode control.
* o Regulator status.
* o sysfs entries for showing client devices and status
*
* EXPERIMENTAL FEATURES:
* Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
* to use most efficient operating mode depending upon voltage and load and
* is transparent to client drivers.
*
* e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
* IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
* idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
* but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
* efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
* in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
*/
#ifndef __LINUX_REGULATOR_CONSUMER_H_
#define __LINUX_REGULATOR_CONSUMER_H_
#include <linux/err.h>
#include <linux/suspend.h>
#include <regulator/regulator.h>
struct device;
struct notifier_block;
struct regmap;
struct regulator_dev;
/*
* Regulator operating modes.
*
* Regulators can run in a variety of different operating modes depending on
* output load. This allows further system power savings by selecting the
* best (and most efficient) regulator mode for a desired load.
*
* Most drivers will only care about NORMAL. The modes below are generic and
* will probably not match the naming convention of your regulator data sheet
* but should match the use cases in the datasheet.
*
* In order of power efficiency (least efficient at top).
*
* Mode Description
* FAST Regulator can handle fast changes in it's load.
* e.g. useful in CPU voltage & frequency scaling where
* load can quickly increase with CPU frequency increases.
*
* NORMAL Normal regulator power supply mode. Most drivers will
* use this mode.
*
* IDLE Regulator runs in a more efficient mode for light
* loads. Can be used for devices that have a low power
* requirement during periods of inactivity. This mode
* may be more noisy than NORMAL and may not be able
* to handle fast load switching.
*
* STANDBY Regulator runs in the most efficient mode for very
* light loads. Can be used by devices when they are
* in a sleep/standby state. This mode is likely to be
* the most noisy and may not be able to handle fast load
* switching.
*
* NOTE: Most regulators will only support a subset of these modes. Some
* will only just support NORMAL.
*
* These modes can be OR'ed together to make up a mask of valid register modes.
*/
#define REGULATOR_MODE_INVALID 0x0
#define REGULATOR_MODE_FAST 0x1
#define REGULATOR_MODE_NORMAL 0x2
#define REGULATOR_MODE_IDLE 0x4
#define REGULATOR_MODE_STANDBY 0x8
/*
* Regulator errors that can be queried using regulator_get_error_flags
*
* UNDER_VOLTAGE Regulator output is under voltage.
* OVER_CURRENT Regulator output current is too high.
* REGULATION_OUT Regulator output is out of regulation.
* FAIL Regulator output has failed.
* OVER_TEMP Regulator over temp.
*
* NOTE: These errors can be OR'ed together.
*/
#define REGULATOR_ERROR_UNDER_VOLTAGE BIT(1)
#define REGULATOR_ERROR_OVER_CURRENT BIT(2)
#define REGULATOR_ERROR_REGULATION_OUT BIT(3)
#define REGULATOR_ERROR_FAIL BIT(4)
#define REGULATOR_ERROR_OVER_TEMP BIT(5)
#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6)
#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7)
#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8)
#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9)
/**
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
*
* @old_uV: Current voltage before change.
* @min_uV: Min voltage we'll change to.
* @max_uV: Max voltage we'll change to.
*/
struct pre_voltage_change_data {
unsigned long old_uV;
unsigned long min_uV;
unsigned long max_uV;
};
struct regulator;
/**
* struct regulator_bulk_data - Data used for bulk regulator operations.
*
* @supply: The name of the supply. Initialised by the user before
* using the bulk regulator APIs.
* @consumer: The regulator consumer for the supply. This will be managed
* by the bulk API.
* @init_load_uA: After getting the regulator, regulator_set_load() will be
* called with this load. Initialised by the user before
* using the bulk regulator APIs.
*
* The regulator APIs provide a series of regulator_bulk_() API calls as
* a convenience to consumers which require multiple supplies. This
* structure is used to manage data for these calls.
*/
struct regulator_bulk_data {
const char *supply;
struct regulator *consumer;
int init_load_uA;
/* private: Internal use */
int ret;
};
#if defined(CONFIG_REGULATOR)
/* regulator get and put */
struct regulator *__must_check regulator_get(struct device *dev,
const char *id);
struct regulator *__must_check devm_regulator_get(struct device *dev,
const char *id);
struct regulator *__must_check regulator_get_exclusive(struct device *dev,
const char *id);
struct regulator *__must_check devm_regulator_get_exclusive(struct device *dev,
const char *id);
struct regulator *__must_check regulator_get_optional(struct device *dev,
const char *id);
struct regulator *__must_check devm_regulator_get_optional(struct device *dev,
const char *id);
int devm_regulator_get_enable(struct device *dev, const char *id);
int devm_regulator_get_enable_optional(struct device *dev, const char *id);
int devm_regulator_get_enable_read_voltage(struct device *dev, const char *id);
void regulator_put(struct regulator *regulator);
void devm_regulator_put(struct regulator *regulator);
int regulator_register_supply_alias(struct device *dev, const char *id,
struct device *alias_dev,
const char *alias_id);
void regulator_unregister_supply_alias(struct device *dev, const char *id);
int regulator_bulk_register_supply_alias(struct device *dev,
const char *const *id,
struct device *alias_dev,
const char *const *alias_id,
int num_id);
void regulator_bulk_unregister_supply_alias(struct device *dev,
const char * const *id, int num_id);
int devm_regulator_register_supply_alias(struct device *dev, const char *id,
struct device *alias_dev,
const char *alias_id);
int devm_regulator_bulk_register_supply_alias(struct device *dev,
const char *const *id,
struct device *alias_dev,
const char *const *alias_id,
int num_id);
/* regulator output control and status */
int __must_check regulator_enable(struct regulator *regulator);
int regulator_disable(struct regulator *regulator);
int regulator_force_disable(struct regulator *regulator);
int regulator_is_enabled(struct regulator *regulator);
int regulator_disable_deferred(struct regulator *regulator, int ms);
int __must_check regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
int __must_check of_regulator_bulk_get_all(struct device *dev, struct device_node *np,
struct regulator_bulk_data **consumers);
int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
void devm_regulator_bulk_put(struct regulator_bulk_data *consumers);
int __must_check devm_regulator_bulk_get_exclusive(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers);
int __must_check devm_regulator_bulk_get_const(
struct device *dev, int num_consumers,
const struct regulator_bulk_data *in_consumers,
struct regulator_bulk_data **out_consumers);
int __must_check regulator_bulk_enable(int num_consumers,
struct regulator_bulk_data *consumers);
int devm_regulator_bulk_get_enable(struct device *dev, int num_consumers,
const char * const *id);
int regulator_bulk_disable(int num_consumers,
struct regulator_bulk_data *consumers);
int regulator_bulk_force_disable(int num_consumers,
struct regulator_bulk_data *consumers);
void regulator_bulk_free(int num_consumers,
struct regulator_bulk_data *consumers);
int regulator_count_voltages(struct regulator *regulator);
int regulator_list_voltage(struct regulator *regulator, unsigned selector);
int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV);
unsigned int regulator_get_linear_step(struct regulator *regulator);
int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
int regulator_set_voltage_time(struct regulator *regulator,
int old_uV, int new_uV);
int regulator_get_voltage(struct regulator *regulator);
int regulator_sync_voltage(struct regulator *regulator);
int regulator_set_current_limit(struct regulator *regulator,
int min_uA, int max_uA);
int regulator_get_current_limit(struct regulator *regulator);
int regulator_set_mode(struct regulator *regulator, unsigned int mode);
unsigned int regulator_get_mode(struct regulator *regulator);
int regulator_get_error_flags(struct regulator *regulator,
unsigned int *flags);
int regulator_set_load(struct regulator *regulator, int load_uA);
int regulator_allow_bypass(struct regulator *regulator, bool allow);
struct regmap *regulator_get_regmap(struct regulator *regulator);
int regulator_get_hardware_vsel_register(struct regulator *regulator,
unsigned *vsel_reg,
unsigned *vsel_mask);
int regulator_list_hardware_vsel(struct regulator *regulator,
unsigned selector);
int regulator_hardware_enable(struct regulator *regulator, bool enable);
/* regulator notifier block */
int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb);
int devm_regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb);
int regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb);
void devm_regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb);
/* regulator suspend */
int regulator_suspend_enable(struct regulator_dev *rdev,
suspend_state_t state);
int regulator_suspend_disable(struct regulator_dev *rdev,
suspend_state_t state);
int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV,
int max_uV, suspend_state_t state);
/* driver data - core doesn't touch */
void *regulator_get_drvdata(struct regulator *regulator);
void regulator_set_drvdata(struct regulator *regulator, void *data);
/* misc helpers */
void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
const char *const *supply_names,
unsigned int num_supplies);
bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2);
#else
/*
* Make sure client drivers will still build on systems with no software
* controllable voltage or current regulators.
*/
static inline struct regulator *__must_check regulator_get(struct device *dev,
const char *id)
{
/* Nothing except the stubbed out regulator API should be
* looking at the value except to check if it is an error
* value. Drivers are free to handle NULL specifically by
* skipping all regulator API calls, but they don't have to.
* Drivers which don't, should make sure they properly handle
* corner cases of the API, such as regulator_get_voltage()
* returning 0.
*/
return NULL;
}
static inline struct regulator *__must_check
devm_regulator_get(struct device *dev, const char *id)
{
return NULL;
}
static inline struct regulator *__must_check
regulator_get_exclusive(struct device *dev, const char *id)
{
return ERR_PTR(-ENODEV);
}
static inline struct regulator *__must_check
devm_regulator_get_exclusive(struct device *dev, const char *id)
{
return ERR_PTR(-ENODEV);
}
static inline int devm_regulator_get_enable(struct device *dev, const char *id)
{
return 0;
}
static inline int devm_regulator_get_enable_optional(struct device *dev,
const char *id)
{
return 0;
}
static inline int devm_regulator_get_enable_read_voltage(struct device *dev,
const char *id)
{
return -ENODEV;
}
static inline struct regulator *__must_check
regulator_get_optional(struct device *dev, const char *id)
{
return ERR_PTR(-ENODEV);
}
static inline struct regulator *__must_check
devm_regulator_get_optional(struct device *dev, const char *id)
{
return ERR_PTR(-ENODEV);
}
static inline void regulator_put(struct regulator *regulator)
{
}
static inline void devm_regulator_put(struct regulator *regulator)
{
}
static inline void devm_regulator_bulk_put(struct regulator_bulk_data *consumers)
{
}
static inline int regulator_register_supply_alias(struct device *dev,
const char *id,
struct device *alias_dev,
const char *alias_id)
{
return 0;
}
static inline void regulator_unregister_supply_alias(struct device *dev,
const char *id)
{
}
static inline int regulator_bulk_register_supply_alias(struct device *dev,
const char *const *id,
struct device *alias_dev,
const char * const *alias_id,
int num_id)
{
return 0;
}
static inline void regulator_bulk_unregister_supply_alias(struct device *dev,
const char * const *id,
int num_id)
{
}
static inline int devm_regulator_register_supply_alias(struct device *dev,
const char *id,
struct device *alias_dev,
const char *alias_id)
{
return 0;
}
static inline int devm_regulator_bulk_register_supply_alias(struct device *dev,
const char *const *id,
struct device *alias_dev,
const char *const *alias_id,
int num_id)
{
return 0;
}
static inline int regulator_enable(struct regulator *regulator)
{
return 0;
}
static inline int regulator_disable(struct regulator *regulator)
{
return 0;
}
static inline int regulator_force_disable(struct regulator *regulator)
{
return 0;
}
static inline int regulator_disable_deferred(struct regulator *regulator,
int ms)
{
return 0;
}
static inline int regulator_is_enabled(struct regulator *regulator)
{
return 1;
}
static inline int regulator_bulk_get(struct device *dev,
int num_consumers,
struct regulator_bulk_data *consumers)
{
return 0;
}
static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
struct regulator_bulk_data *consumers)
{
return 0;
}
static inline int of_regulator_bulk_get_all(struct device *dev, struct device_node *np,
struct regulator_bulk_data **consumers)
{
return 0;
}
static inline int devm_regulator_bulk_get_const(
struct device *dev, int num_consumers,
const struct regulator_bulk_data *in_consumers,
struct regulator_bulk_data **out_consumers)
{
return 0;
}
static inline int regulator_bulk_enable(int num_consumers,
struct regulator_bulk_data *consumers)
{
return 0;
}
static inline int devm_regulator_bulk_get_enable(struct device *dev,
int num_consumers,
const char * const *id)
{
return 0;
}
static inline int regulator_bulk_disable(int num_consumers,
struct regulator_bulk_data *consumers)
{
return 0;
}
static inline int regulator_bulk_force_disable(int num_consumers,
struct regulator_bulk_data *consumers)
{
return 0;
}
static inline void regulator_bulk_free(int num_consumers,
struct regulator_bulk_data *consumers)
{
}
static inline int regulator_set_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
return 0;
}
static inline int regulator_set_voltage_time(struct regulator *regulator,
int old_uV, int new_uV)
{
return 0;
}
static inline int regulator_get_voltage(struct regulator *regulator)
{
return -EINVAL;
}
static inline int regulator_sync_voltage(struct regulator *regulator)
{
return -EINVAL;
}
static inline int regulator_is_supported_voltage(struct regulator *regulator,
int min_uV, int max_uV)
{
return 0;
}
static inline unsigned int regulator_get_linear_step(struct regulator *regulator)
{
return 0;
}
static inline int regulator_set_current_limit(struct regulator *regulator,
int min_uA, int max_uA)
{
return 0;
}
static inline int regulator_get_current_limit(struct regulator *regulator)
{
return 0;
}
static inline int regulator_set_mode(struct regulator *regulator,
unsigned int mode)
{
return 0;
}
static inline unsigned int regulator_get_mode(struct regulator *regulator)
{
return REGULATOR_MODE_NORMAL;
}
static inline int regulator_get_error_flags(struct regulator *regulator,
unsigned int *flags)
{
return -EINVAL;
}
static inline int regulator_set_load(struct regulator *regulator, int load_uA)
{
return 0;
}
static inline int regulator_allow_bypass(struct regulator *regulator,
bool allow)
{
return 0;
}
static inline struct regmap *regulator_get_regmap(struct regulator *regulator)
{
return ERR_PTR(-EOPNOTSUPP);
}
static inline int regulator_get_hardware_vsel_register(struct regulator *regulator,
unsigned *vsel_reg,
unsigned *vsel_mask)
{
return -EOPNOTSUPP;
}
static inline int regulator_list_hardware_vsel(struct regulator *regulator,
unsigned selector)
{
return -EOPNOTSUPP;
}
static inline int regulator_hardware_enable(struct regulator *regulator,
bool enable)
{
return -EOPNOTSUPP;
}
static inline int regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb)
{
return 0;
}
static inline int devm_regulator_register_notifier(struct regulator *regulator,
struct notifier_block *nb)
{
return 0;
}
static inline int regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb)
{
return 0;
}
static inline int devm_regulator_unregister_notifier(struct regulator *regulator,
struct notifier_block *nb)
{
return 0;
}
static inline int regulator_suspend_enable(struct regulator_dev *rdev,
suspend_state_t state)
{
return -EINVAL;
}
static inline int regulator_suspend_disable(struct regulator_dev *rdev,
suspend_state_t state)
{
return -EINVAL;
}
static inline int regulator_set_suspend_voltage(struct regulator *regulator,
int min_uV, int max_uV,
suspend_state_t state)
{
return -EINVAL;
}
static inline void *regulator_get_drvdata(struct regulator *regulator)
{
return NULL;
}
static inline void regulator_set_drvdata(struct regulator *regulator,
void *data)
{
}
static inline int regulator_count_voltages(struct regulator *regulator)
{
return 0;
}
static inline int regulator_list_voltage(struct regulator *regulator, unsigned selector)
{
return -EINVAL;
}
static inline void
regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
const char *const *supply_names,
unsigned int num_supplies)
{
}
static inline bool
regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
{
return false;
}
#endif
static inline int regulator_set_voltage_triplet(struct regulator *regulator,
int min_uV, int target_uV,
int max_uV)
{
if (regulator_set_voltage(regulator, target_uV, max_uV) == 0)
return 0;
return regulator_set_voltage(regulator, min_uV, max_uV);
}
static inline int regulator_set_voltage_tol(struct regulator *regulator,
int new_uV, int tol_uV)
{
if (regulator_set_voltage(regulator, new_uV, new_uV + tol_uV) == 0)
return 0;
else
return regulator_set_voltage(regulator,
new_uV - tol_uV, new_uV + tol_uV);
}
static inline int regulator_is_supported_voltage_tol(struct regulator *regulator,
int target_uV, int tol_uV)
{
return regulator_is_supported_voltage(regulator,
target_uV - tol_uV,
target_uV + tol_uV);
}
#endif