| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Pierre-Louis Bossart | 713 | 60.58% | 39 | 73.58% |
| Vinod Koul | 319 | 27.10% | 4 | 7.55% |
| Bard Liao | 79 | 6.71% | 7 | 13.21% |
| Rander Wang | 62 | 5.27% | 2 | 3.77% |
| Ranjani Sridharan | 4 | 0.34% | 1 | 1.89% |
| Total | 1177 | 53 |
/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ /* Copyright(c) 2015-17 Intel Corporation. */ #ifndef __SDW_INTEL_H #define __SDW_INTEL_H #include <linux/irqreturn.h> #include <linux/soundwire/sdw.h> /********************************************************************* * cAVS and ACE1.x definitions *********************************************************************/ #define SDW_SHIM_BASE 0x2C000 #define SDW_ALH_BASE 0x2C800 #define SDW_SHIM_BASE_ACE 0x38000 #define SDW_ALH_BASE_ACE 0x24000 #define SDW_LINK_BASE 0x30000 #define SDW_LINK_SIZE 0x10000 /* Intel SHIM Registers Definition */ /* LCAP */ #define SDW_SHIM_LCAP 0x0 #define SDW_SHIM_LCAP_LCOUNT_MASK GENMASK(2, 0) #define SDW_SHIM_LCAP_MLCS_MASK BIT(8) /* LCTL */ #define SDW_SHIM_LCTL 0x4 #define SDW_SHIM_LCTL_SPA BIT(0) #define SDW_SHIM_LCTL_SPA_MASK GENMASK(3, 0) #define SDW_SHIM_LCTL_CPA BIT(8) #define SDW_SHIM_LCTL_CPA_MASK GENMASK(11, 8) #define SDW_SHIM_LCTL_MLCS_MASK GENMASK(29, 27) #define SDW_SHIM_MLCS_XTAL_CLK 0x0 #define SDW_SHIM_MLCS_CARDINAL_CLK 0x1 #define SDW_SHIM_MLCS_AUDIO_PLL_CLK 0x2 /* SYNC */ #define SDW_SHIM_SYNC 0xC #define SDW_SHIM_SYNC_SYNCPRD_VAL_24 (24000 / SDW_CADENCE_GSYNC_KHZ - 1) #define SDW_SHIM_SYNC_SYNCPRD_VAL_24_576 (24576 / SDW_CADENCE_GSYNC_KHZ - 1) #define SDW_SHIM_SYNC_SYNCPRD_VAL_38_4 (38400 / SDW_CADENCE_GSYNC_KHZ - 1) #define SDW_SHIM_SYNC_SYNCPRD_VAL_96 (96000 / SDW_CADENCE_GSYNC_KHZ - 1) #define SDW_SHIM_SYNC_SYNCPRD GENMASK(14, 0) #define SDW_SHIM_SYNC_SYNCCPU BIT(15) #define SDW_SHIM_SYNC_CMDSYNC_MASK GENMASK(19, 16) #define SDW_SHIM_SYNC_CMDSYNC BIT(16) #define SDW_SHIM_SYNC_SYNCGO BIT(24) /* Control stream capabililities and channel mask */ #define SDW_SHIM_CTLSCAP(x) (0x010 + 0x60 * (x)) #define SDW_SHIM_CTLS0CM(x) (0x012 + 0x60 * (x)) #define SDW_SHIM_CTLS1CM(x) (0x014 + 0x60 * (x)) #define SDW_SHIM_CTLS2CM(x) (0x016 + 0x60 * (x)) #define SDW_SHIM_CTLS3CM(x) (0x018 + 0x60 * (x)) /* PCM Stream capabilities */ #define SDW_SHIM_PCMSCAP(x) (0x020 + 0x60 * (x)) #define SDW_SHIM_PCMSCAP_ISS GENMASK(3, 0) #define SDW_SHIM_PCMSCAP_OSS GENMASK(7, 4) #define SDW_SHIM_PCMSCAP_BSS GENMASK(12, 8) /* PCM Stream Channel Map */ #define SDW_SHIM_PCMSYCHM(x, y) (0x022 + (0x60 * (x)) + (0x2 * (y))) /* PCM Stream Channel Count */ #define SDW_SHIM_PCMSYCHC(x, y) (0x042 + (0x60 * (x)) + (0x2 * (y))) #define SDW_SHIM_PCMSYCM_LCHN GENMASK(3, 0) #define SDW_SHIM_PCMSYCM_HCHN GENMASK(7, 4) #define SDW_SHIM_PCMSYCM_STREAM GENMASK(13, 8) #define SDW_SHIM_PCMSYCM_DIR BIT(15) /* IO control */ #define SDW_SHIM_IOCTL(x) (0x06C + 0x60 * (x)) #define SDW_SHIM_IOCTL_MIF BIT(0) #define SDW_SHIM_IOCTL_CO BIT(1) #define SDW_SHIM_IOCTL_COE BIT(2) #define SDW_SHIM_IOCTL_DO BIT(3) #define SDW_SHIM_IOCTL_DOE BIT(4) #define SDW_SHIM_IOCTL_BKE BIT(5) #define SDW_SHIM_IOCTL_WPDD BIT(6) #define SDW_SHIM_IOCTL_CIBD BIT(8) #define SDW_SHIM_IOCTL_DIBD BIT(9) /* Wake Enable*/ #define SDW_SHIM_WAKEEN 0x190 #define SDW_SHIM_WAKEEN_ENABLE BIT(0) /* Wake Status */ #define SDW_SHIM_WAKESTS 0x192 #define SDW_SHIM_WAKESTS_STATUS BIT(0) /* AC Timing control */ #define SDW_SHIM_CTMCTL(x) (0x06E + 0x60 * (x)) #define SDW_SHIM_CTMCTL_DACTQE BIT(0) #define SDW_SHIM_CTMCTL_DODS BIT(1) #define SDW_SHIM_CTMCTL_DOAIS GENMASK(4, 3) /* Intel ALH Register definitions */ #define SDW_ALH_STRMZCFG(x) (0x000 + (0x4 * (x))) #define SDW_ALH_NUM_STREAMS 64 #define SDW_ALH_STRMZCFG_DMAT_VAL 0x3 #define SDW_ALH_STRMZCFG_DMAT GENMASK(7, 0) #define SDW_ALH_STRMZCFG_CHN GENMASK(19, 16) /********************************************************************* * ACE2.x definitions for SHIM registers - only accessible when the * HDAudio extended link LCTL.SPA/CPA = 1. *********************************************************************/ /* x variable is link index */ #define SDW_SHIM2_GENERIC_BASE(x) (0x00030000 + 0x8000 * (x)) #define SDW_IP_BASE(x) (0x00030100 + 0x8000 * (x)) #define SDW_SHIM2_VS_BASE(x) (0x00036000 + 0x8000 * (x)) /* SHIM2 Generic Registers */ /* Read-only capabilities */ #define SDW_SHIM2_LECAP 0x00 #define SDW_SHIM2_LECAP_HDS BIT(0) /* unset -> Host mode */ #define SDW_SHIM2_LECAP_MLC GENMASK(3, 1) /* Number of Lanes */ /* PCM Stream capabilities */ #define SDW_SHIM2_PCMSCAP 0x10 #define SDW_SHIM2_PCMSCAP_ISS GENMASK(3, 0) /* Input-only streams */ #define SDW_SHIM2_PCMSCAP_OSS GENMASK(7, 4) /* Output-only streams */ #define SDW_SHIM2_PCMSCAP_BSS GENMASK(12, 8) /* Bidirectional streams */ /* Read-only PCM Stream Channel Count, y variable is stream */ #define SDW_SHIM2_PCMSYCHC(y) (0x14 + (0x4 * (y))) #define SDW_SHIM2_PCMSYCHC_CS GENMASK(3, 0) /* Channels Supported */ /* PCM Stream Channel Map */ #define SDW_SHIM2_PCMSYCHM(y) (0x16 + (0x4 * (y))) #define SDW_SHIM2_PCMSYCHM_LCHAN GENMASK(3, 0) /* Lowest channel used by the FIFO port */ #define SDW_SHIM2_PCMSYCHM_HCHAN GENMASK(7, 4) /* Lowest channel used by the FIFO port */ #define SDW_SHIM2_PCMSYCHM_STRM GENMASK(13, 8) /* HDaudio stream tag */ #define SDW_SHIM2_PCMSYCHM_DIR BIT(15) /* HDaudio stream direction */ /* SHIM2 vendor-specific registers */ #define SDW_SHIM2_INTEL_VS_LVSCTL 0x04 #define SDW_SHIM2_INTEL_VS_LVSCTL_FCG BIT(26) #define SDW_SHIM2_INTEL_VS_LVSCTL_MLCS GENMASK(29, 27) #define SDW_SHIM2_INTEL_VS_LVSCTL_DCGD BIT(30) #define SDW_SHIM2_INTEL_VS_LVSCTL_ICGD BIT(31) #define SDW_SHIM2_MLCS_XTAL_CLK 0x0 #define SDW_SHIM2_MLCS_CARDINAL_CLK 0x1 #define SDW_SHIM2_MLCS_AUDIO_PLL_CLK 0x2 #define SDW_SHIM2_MLCS_MCLK_INPUT_CLK 0x3 #define SDW_SHIM2_MLCS_WOV_RING_OSC_CLK 0x4 #define SDW_SHIM2_INTEL_VS_WAKEEN 0x08 #define SDW_SHIM2_INTEL_VS_WAKEEN_PWE BIT(0) #define SDW_SHIM2_INTEL_VS_WAKESTS 0x0A #define SDW_SHIM2_INTEL_VS_WAKEEN_PWS BIT(0) #define SDW_SHIM2_INTEL_VS_IOCTL 0x0C #define SDW_SHIM2_INTEL_VS_IOCTL_MIF BIT(0) #define SDW_SHIM2_INTEL_VS_IOCTL_CO BIT(1) #define SDW_SHIM2_INTEL_VS_IOCTL_COE BIT(2) #define SDW_SHIM2_INTEL_VS_IOCTL_DO BIT(3) #define SDW_SHIM2_INTEL_VS_IOCTL_DOE BIT(4) #define SDW_SHIM2_INTEL_VS_IOCTL_BKE BIT(5) #define SDW_SHIM2_INTEL_VS_IOCTL_WPDD BIT(6) #define SDW_SHIM2_INTEL_VS_IOCTL_ODC BIT(7) #define SDW_SHIM2_INTEL_VS_IOCTL_CIBD BIT(8) #define SDW_SHIM2_INTEL_VS_IOCTL_DIBD BIT(9) #define SDW_SHIM2_INTEL_VS_IOCTL_HAMIFD BIT(10) #define SDW_SHIM2_INTEL_VS_ACTMCTL 0x0E #define SDW_SHIM2_INTEL_VS_ACTMCTL_DACTQE BIT(0) #define SDW_SHIM2_INTEL_VS_ACTMCTL_DODS BIT(1) #define SDW_SHIM2_INTEL_VS_ACTMCTL_DODSE BIT(2) #define SDW_SHIM2_INTEL_VS_ACTMCTL_DOAIS GENMASK(4, 3) #define SDW_SHIM2_INTEL_VS_ACTMCTL_DOAISE BIT(5) #define SDW_SHIM3_INTEL_VS_ACTMCTL_CLSS BIT(6) #define SDW_SHIM3_INTEL_VS_ACTMCTL_CLDS GENMASK(11, 7) #define SDW_SHIM3_INTEL_VS_ACTMCTL_DODSE2 GENMASK(13, 12) #define SDW_SHIM3_INTEL_VS_ACTMCTL_DOAISE2 BIT(14) #define SDW_SHIM3_INTEL_VS_ACTMCTL_CLDE BIT(15) /** * struct sdw_intel_stream_params_data: configuration passed during * the @params_stream callback, e.g. for interaction with DSP * firmware. */ struct sdw_intel_stream_params_data { struct snd_pcm_substream *substream; struct snd_soc_dai *dai; struct snd_pcm_hw_params *hw_params; int link_id; int alh_stream_id; }; /** * struct sdw_intel_stream_free_data: configuration passed during * the @free_stream callback, e.g. for interaction with DSP * firmware. */ struct sdw_intel_stream_free_data { struct snd_pcm_substream *substream; struct snd_soc_dai *dai; int link_id; }; /** * struct sdw_intel_ops: Intel audio driver callback ops * */ struct sdw_intel_ops { int (*params_stream)(struct device *dev, struct sdw_intel_stream_params_data *params_data); int (*free_stream)(struct device *dev, struct sdw_intel_stream_free_data *free_data); int (*trigger)(struct snd_pcm_substream *substream, int cmd, struct snd_soc_dai *dai); }; /** * struct sdw_intel_acpi_info - Soundwire Intel information found in ACPI tables * @handle: ACPI controller handle * @count: link count found with "sdw-master-count" property * @link_mask: bit-wise mask listing links enabled by BIOS menu * * this structure could be expanded to e.g. provide all the _ADR * information in case the link_mask is not sufficient to identify * platform capabilities. */ struct sdw_intel_acpi_info { acpi_handle handle; int count; u32 link_mask; }; struct sdw_intel_link_dev; /* Intel clock-stop/pm_runtime quirk definitions */ /* * Force the clock to remain on during pm_runtime suspend. This might * be needed if Slave devices do not have an alternate clock source or * if the latency requirements are very strict. */ #define SDW_INTEL_CLK_STOP_NOT_ALLOWED BIT(0) /* * Stop the bus during pm_runtime suspend. If set, a complete bus * reset and re-enumeration will be performed when the bus * restarts. This mode shall not be used if Slave devices can generate * in-band wakes. */ #define SDW_INTEL_CLK_STOP_TEARDOWN BIT(1) /* * Stop the bus during pm_suspend if Slaves are not wake capable * (e.g. speaker amplifiers). The clock-stop mode is typically * slightly higher power than when the IP is completely powered-off. */ #define SDW_INTEL_CLK_STOP_WAKE_CAPABLE_ONLY BIT(2) /* * Require a bus reset (and complete re-enumeration) when exiting * clock stop modes. This may be needed if the controller power was * turned off and all context lost. This quirk shall not be used if a * Slave device needs to remain enumerated and keep its context, * e.g. to provide the reasons for the wake, report acoustic events or * pass a history buffer. */ #define SDW_INTEL_CLK_STOP_BUS_RESET BIT(3) struct hdac_bus; /** * struct sdw_intel_ctx - context allocated by the controller * driver probe * @count: link count * @mmio_base: mmio base of SoundWire registers, only used to check * hardware capabilities after all power dependencies are settled. * @link_mask: bit-wise mask listing SoundWire links reported by the * Controller * @num_slaves: total number of devices exposed across all enabled links * @handle: ACPI parent handle * @ldev: information for each link (controller-specific and kept * opaque here) * @ids: array of slave_id, representing Slaves exposed across all enabled * links * @link_list: list to handle interrupts across all links * @shim_lock: mutex to handle concurrent rmw access to shared SHIM registers. * @shim_mask: flags to track initialization of SHIM shared registers * @shim_base: sdw shim base. * @alh_base: sdw alh base. */ struct sdw_intel_ctx { int count; void __iomem *mmio_base; u32 link_mask; int num_slaves; acpi_handle handle; struct sdw_intel_link_dev **ldev; struct sdw_extended_slave_id *ids; struct list_head link_list; struct mutex shim_lock; /* lock for access to shared SHIM registers */ u32 shim_mask; u32 shim_base; u32 alh_base; }; /** * struct sdw_intel_res - Soundwire Intel global resource structure, * typically populated by the DSP driver * * @hw_ops: abstraction for platform ops * @count: link count * @mmio_base: mmio base of SoundWire registers * @irq: interrupt number * @handle: ACPI parent handle * @parent: parent device * @ops: callback ops * @dev: device implementing hwparams and free callbacks * @link_mask: bit-wise mask listing links selected by the DSP driver * This mask may be a subset of the one reported by the controller since * machine-specific quirks are handled in the DSP driver. * @clock_stop_quirks: mask array of possible behaviors requested by the * DSP driver. The quirks are common for all links for now. * @shim_base: sdw shim base. * @alh_base: sdw alh base. * @ext: extended HDaudio link support * @hbus: hdac_bus pointer, needed for power management * @eml_lock: mutex protecting shared registers in the HDaudio multi-link * space */ struct sdw_intel_res { const struct sdw_intel_hw_ops *hw_ops; int count; void __iomem *mmio_base; int irq; acpi_handle handle; struct device *parent; const struct sdw_intel_ops *ops; struct device *dev; u32 link_mask; u32 clock_stop_quirks; u32 shim_base; u32 alh_base; bool ext; struct hdac_bus *hbus; struct mutex *eml_lock; }; /* * On Intel platforms, the SoundWire IP has dependencies on power * rails shared with the DSP, and the initialization steps are split * in three. First an ACPI scan to check what the firmware describes * in DSDT tables, then an allocation step (with no hardware * configuration but with all the relevant devices created) and last * the actual hardware configuration. The final stage is a global * interrupt enable which is controlled by the DSP driver. Splitting * these phases helps simplify the boot flow and make early decisions * on e.g. which machine driver to select (I2S mode, HDaudio or * SoundWire). */ int sdw_intel_acpi_scan(acpi_handle *parent_handle, struct sdw_intel_acpi_info *info); void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx); struct sdw_intel_ctx * sdw_intel_probe(struct sdw_intel_res *res); int sdw_intel_startup(struct sdw_intel_ctx *ctx); void sdw_intel_exit(struct sdw_intel_ctx *ctx); irqreturn_t sdw_intel_thread(int irq, void *dev_id); #define SDW_INTEL_QUIRK_MASK_BUS_DISABLE BIT(1) struct sdw_intel; /* struct intel_sdw_hw_ops - SoundWire ops for Intel platforms. * @debugfs_init: initialize all debugfs capabilities * @debugfs_exit: close and cleanup debugfs capabilities * @register_dai: read all PDI information and register DAIs * @check_clock_stop: throw error message if clock is not stopped. * @start_bus: normal start * @start_bus_after_reset: start after reset * @start_bus_after_clock_stop: start after mode0 clock stop * @stop_bus: stop all bus * @link_power_up: power-up using chip-specific helpers * @link_power_down: power-down with chip-specific helpers * @shim_check_wake: check if a wake was received * @shim_wake: enable/disable in-band wake management * @pre_bank_switch: helper for bus management * @post_bank_switch: helper for bus management * @sync_arm: helper for multi-link synchronization * @sync_go_unlocked: helper for multi-link synchronization - * shim_lock is assumed to be locked at higher level * @sync_go: helper for multi-link synchronization * @sync_check_cmdsync_unlocked: helper for multi-link synchronization * and bank switch - shim_lock is assumed to be locked at higher level * @program_sdi: helper for codec command/control based on dev_num */ struct sdw_intel_hw_ops { void (*debugfs_init)(struct sdw_intel *sdw); void (*debugfs_exit)(struct sdw_intel *sdw); int (*register_dai)(struct sdw_intel *sdw); void (*check_clock_stop)(struct sdw_intel *sdw); int (*start_bus)(struct sdw_intel *sdw); int (*start_bus_after_reset)(struct sdw_intel *sdw); int (*start_bus_after_clock_stop)(struct sdw_intel *sdw); int (*stop_bus)(struct sdw_intel *sdw, bool clock_stop); int (*link_power_up)(struct sdw_intel *sdw); int (*link_power_down)(struct sdw_intel *sdw); int (*shim_check_wake)(struct sdw_intel *sdw); void (*shim_wake)(struct sdw_intel *sdw, bool wake_enable); int (*pre_bank_switch)(struct sdw_intel *sdw); int (*post_bank_switch)(struct sdw_intel *sdw); void (*sync_arm)(struct sdw_intel *sdw); int (*sync_go_unlocked)(struct sdw_intel *sdw); int (*sync_go)(struct sdw_intel *sdw); bool (*sync_check_cmdsync_unlocked)(struct sdw_intel *sdw); void (*program_sdi)(struct sdw_intel *sdw, int dev_num); }; extern const struct sdw_intel_hw_ops sdw_intel_cnl_hw_ops; extern const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops; /* * IDA min selected to allow for 5 unconstrained devices per link, * and 6 system-unique Device Numbers for wake-capable devices. */ #define SDW_INTEL_DEV_NUM_IDA_MIN 6 #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1