| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Linus Torvalds (pre-git) | 551 | 33.99% | 38 | 28.15% |
| Greg Kroah-Hartman | 439 | 27.08% | 34 | 25.19% |
| Johan Hovold | 271 | 16.72% | 24 | 17.78% |
| Alan Cox | 114 | 7.03% | 6 | 4.44% |
| Oliver Neukum | 46 | 2.84% | 4 | 2.96% |
| Jason Wessel | 36 | 2.22% | 2 | 1.48% |
| Alan Stern | 31 | 1.91% | 3 | 2.22% |
| Lonnie Mendez | 28 | 1.73% | 1 | 0.74% |
| Joris van Rantwijk | 22 | 1.36% | 1 | 0.74% |
| Al Viro | 18 | 1.11% | 2 | 1.48% |
| Guennadi Liakhovetski | 15 | 0.93% | 1 | 0.74% |
| Libor Pechacek | 13 | 0.80% | 1 | 0.74% |
| Pete Zaitcev | 8 | 0.49% | 2 | 1.48% |
| David VomLehn | 7 | 0.43% | 1 | 0.74% |
| Jiri Slaby | 4 | 0.25% | 2 | 1.48% |
| Luiz Fernando N. Capitulino | 3 | 0.19% | 2 | 1.48% |
| Randy Dunlap | 3 | 0.19% | 2 | 1.48% |
| Stuart MacDonald | 2 | 0.12% | 1 | 0.74% |
| Linus Torvalds | 2 | 0.12% | 1 | 0.74% |
| Ingo Molnar | 2 | 0.12% | 1 | 0.74% |
| Uwe Kleine-König | 1 | 0.06% | 1 | 0.74% |
| David Brownell | 1 | 0.06% | 1 | 0.74% |
| Zhen Lei | 1 | 0.06% | 1 | 0.74% |
| Robert P. J. Day | 1 | 0.06% | 1 | 0.74% |
| Christophe Jaillet | 1 | 0.06% | 1 | 0.74% |
| Ilpo Järvinen | 1 | 0.06% | 1 | 0.74% |
| Total | 1621 | 135 |
// SPDX-License-Identifier: GPL-2.0 /* * USB Serial Converter stuff * * Copyright (C) 1999 - 2012 * Greg Kroah-Hartman (greg@kroah.com) */ #ifndef __LINUX_USB_SERIAL_H #define __LINUX_USB_SERIAL_H #include <linux/kref.h> #include <linux/mutex.h> #include <linux/serial.h> #include <linux/kfifo.h> /* The maximum number of ports one device can grab at once */ #define MAX_NUM_PORTS 16 /* USB serial flags */ #define USB_SERIAL_WRITE_BUSY 0 #define USB_SERIAL_THROTTLED 1 /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @minor: the minor number of the port * @port_number: the struct usb_serial port number of this port (starts at 0) * @interrupt_in_buffer: pointer to the interrupt in buffer for this port. * @interrupt_in_urb: pointer to the interrupt in struct urb for this port. * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe * for this port. * @interrupt_out_buffer: pointer to the interrupt out buffer for this port. * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes. * @interrupt_out_urb: pointer to the interrupt out struct urb for this port. * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_in_buffers: pointers to the bulk in buffers for this port * @read_urbs: pointers to the bulk in urbs for this port * @read_urbs_free: status bitmap the for bulk in urbs * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. * @write_fifo: kfifo used to buffer outgoing data * @bulk_out_buffers: pointers to the bulk out buffers for this port * @write_urbs: pointers to the bulk out urbs for this port * @write_urbs_free: status bitmap the for bulk out urbs * @icount: interrupt counters * @tx_bytes: number of bytes currently in host stack queues * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @flags: usb serial port flags * @work: work queue entry for the line discipline waking up. * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. */ struct usb_serial_port { struct usb_serial *serial; struct tty_port port; spinlock_t lock; u32 minor; u8 port_number; unsigned char *interrupt_in_buffer; struct urb *interrupt_in_urb; __u8 interrupt_in_endpointAddress; unsigned char *interrupt_out_buffer; int interrupt_out_size; struct urb *interrupt_out_urb; __u8 interrupt_out_endpointAddress; unsigned char *bulk_in_buffer; int bulk_in_size; struct urb *read_urb; __u8 bulk_in_endpointAddress; unsigned char *bulk_in_buffers[2]; struct urb *read_urbs[2]; unsigned long read_urbs_free; unsigned char *bulk_out_buffer; int bulk_out_size; struct urb *write_urb; struct kfifo write_fifo; unsigned char *bulk_out_buffers[2]; struct urb *write_urbs[2]; unsigned long write_urbs_free; __u8 bulk_out_endpointAddress; struct async_icount icount; int tx_bytes; unsigned long flags; struct work_struct work; unsigned long sysrq; /* sysrq timeout */ struct device dev; }; #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev) /* get and set the port private data pointer helper functions */ static inline void *usb_get_serial_port_data(struct usb_serial_port *port) { return dev_get_drvdata(&port->dev); } static inline void usb_set_serial_port_data(struct usb_serial_port *port, void *data) { dev_set_drvdata(&port->dev, data); } /** * usb_serial - structure used by the usb-serial core for a device * @dev: pointer to the struct usb_device for this device * @type: pointer to the struct usb_serial_driver for this device * @interface: pointer to the struct usb_interface for this device * @sibling: pointer to the struct usb_interface of any sibling interface * @suspend_count: number of suspended (sibling) interfaces * @num_ports: the number of ports this device has * @num_interrupt_in: number of interrupt in endpoints we have * @num_interrupt_out: number of interrupt out endpoints we have * @num_bulk_in: number of bulk in endpoints we have * @num_bulk_out: number of bulk out endpoints we have * @port: array of struct usb_serial_port structures for the different ports. * @private: place to put any driver specific information that is needed. The * usb-serial driver is required to manage this data, the usb-serial core * will not touch this. Use usb_get_serial_data() and * usb_set_serial_data() to access this. */ struct usb_serial { struct usb_device *dev; struct usb_serial_driver *type; struct usb_interface *interface; struct usb_interface *sibling; unsigned int suspend_count; unsigned char disconnected:1; unsigned char attached:1; unsigned char minors_reserved:1; unsigned char num_ports; unsigned char num_port_pointers; unsigned char num_interrupt_in; unsigned char num_interrupt_out; unsigned char num_bulk_in; unsigned char num_bulk_out; struct usb_serial_port *port[MAX_NUM_PORTS]; struct kref kref; struct mutex disc_mutex; void *private; }; #define to_usb_serial(d) container_of(d, struct usb_serial, kref) /* get and set the serial private data pointer helper functions */ static inline void *usb_get_serial_data(struct usb_serial *serial) { return serial->private; } static inline void usb_set_serial_data(struct usb_serial *serial, void *data) { serial->private = data; } struct usb_serial_endpoints { unsigned char num_bulk_in; unsigned char num_bulk_out; unsigned char num_interrupt_in; unsigned char num_interrupt_out; struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS]; struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS]; }; /** * usb_serial_driver - describes a usb serial driver * @description: pointer to a string that describes this driver. This string * used in the syslog messages when a device is inserted or removed. * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_ports: the number of different ports this device will have. * @num_bulk_in: minimum number of bulk-in endpoints * @num_bulk_out: minimum number of bulk-out endpoints * @num_interrupt_in: minimum number of interrupt-in endpoints * @num_interrupt_out: minimum number of interrupt-out endpoints * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It can also be used to verify the number of * endpoints or to modify the port-endpoint mapping. It will be called * after the probe() callback is called, but before attach(). * @probe: pointer to the driver's probe function. * This will be called when the device is inserted into the system, * but before the device has been fully initialized by the usb_serial * subsystem. Use this function to download any firmware to the device, * or any other early initialization that might be needed. * Return 0 to continue on with the initialization sequence. Anything * else will abort it. * @attach: pointer to the driver's attach function. * This will be called when the struct usb_serial structure is fully * set up. Do any local initialization of the device, or any private * memory structure allocation at this point in time. * @disconnect: pointer to the driver's disconnect function. This will be * called when the device is unplugged or unbound from the driver. * @release: pointer to the driver's release function. This will be called * when the usb_serial data structure is about to be destroyed. * @usb_driver: pointer to the struct usb_driver that controls this * device. This is necessary to allow dynamic ids to be added to * the driver from sysfs. * * This structure is defines a USB Serial driver. It provides all of * the information that the USB serial core code needs. If the function * pointers are defined, then the USB serial core code will call them when * the corresponding tty port functions are called. If they are not * called, the generic serial function will be used instead. * * The driver.owner field should be set to the module owner of this driver. * The driver.name field should be set to the name of this driver (remember * it will show up in sysfs, so it needs to be short and to the point. * Using the module name is a good idea.) */ struct usb_serial_driver { const char *description; const struct usb_device_id *id_table; struct list_head driver_list; struct device_driver driver; struct usb_driver *usb_driver; struct usb_dynids dynids; unsigned char num_ports; unsigned char num_bulk_in; unsigned char num_bulk_out; unsigned char num_interrupt_in; unsigned char num_interrupt_out; size_t bulk_in_size; size_t bulk_out_size; int (*probe)(struct usb_serial *serial, const struct usb_device_id *id); int (*attach)(struct usb_serial *serial); int (*calc_num_ports)(struct usb_serial *serial, struct usb_serial_endpoints *epds); void (*disconnect)(struct usb_serial *serial); void (*release)(struct usb_serial *serial); int (*port_probe)(struct usb_serial_port *port); void (*port_remove)(struct usb_serial_port *port); int (*suspend)(struct usb_serial *serial, pm_message_t message); int (*resume)(struct usb_serial *serial); int (*reset_resume)(struct usb_serial *serial); /* serial function calls */ /* Called by console and by the tty layer */ int (*open)(struct tty_struct *tty, struct usb_serial_port *port); void (*close)(struct usb_serial_port *port); int (*write)(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); /* Called only by the tty layer */ unsigned int (*write_room)(struct tty_struct *tty); int (*ioctl)(struct tty_struct *tty, unsigned int cmd, unsigned long arg); void (*get_serial)(struct tty_struct *tty, struct serial_struct *ss); int (*set_serial)(struct tty_struct *tty, struct serial_struct *ss); void (*set_termios)(struct tty_struct *tty, struct usb_serial_port *port, const struct ktermios *old); int (*break_ctl)(struct tty_struct *tty, int break_state); unsigned int (*chars_in_buffer)(struct tty_struct *tty); void (*wait_until_sent)(struct tty_struct *tty, long timeout); bool (*tx_empty)(struct usb_serial_port *port); void (*throttle)(struct tty_struct *tty); void (*unthrottle)(struct tty_struct *tty); int (*tiocmget)(struct tty_struct *tty); int (*tiocmset)(struct tty_struct *tty, unsigned int set, unsigned int clear); int (*tiocmiwait)(struct tty_struct *tty, unsigned long arg); int (*get_icount)(struct tty_struct *tty, struct serial_icounter_struct *icount); /* Called by the tty layer for port level work. There may or may not be an attached tty at this point */ void (*dtr_rts)(struct usb_serial_port *port, int on); int (*carrier_raised)(struct usb_serial_port *port); /* Called by the usb serial hooks to allow the user to rework the termios state */ void (*init_termios)(struct tty_struct *tty); /* USB events */ void (*read_int_callback)(struct urb *urb); void (*write_int_callback)(struct urb *urb); void (*read_bulk_callback)(struct urb *urb); void (*write_bulk_callback)(struct urb *urb); /* Called by the generic read bulk callback */ void (*process_read_urb)(struct urb *urb); /* Called by the generic write implementation */ int (*prepare_write_buffer)(struct usb_serial_port *port, void *dest, size_t size); }; #define to_usb_serial_driver(d) \ container_of(d, struct usb_serial_driver, driver) int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[], const char *name, const struct usb_device_id *id_table); void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]); void usb_serial_port_softint(struct usb_serial_port *port); int usb_serial_suspend(struct usb_interface *intf, pm_message_t message); int usb_serial_resume(struct usb_interface *intf); /* USB Serial console functions */ #ifdef CONFIG_USB_SERIAL_CONSOLE void usb_serial_console_init(int minor); void usb_serial_console_exit(void); void usb_serial_console_disconnect(struct usb_serial *serial); #else static inline void usb_serial_console_init(int minor) { } static inline void usb_serial_console_exit(void) { } static inline void usb_serial_console_disconnect(struct usb_serial *serial) {} #endif /* Functions needed by other parts of the usbserial core */ struct usb_serial_port *usb_serial_port_get_by_minor(unsigned int minor); void usb_serial_put(struct usb_serial *serial); int usb_serial_claim_interface(struct usb_serial *serial, struct usb_interface *intf); int usb_serial_generic_open(struct tty_struct *tty, struct usb_serial_port *port); int usb_serial_generic_write_start(struct usb_serial_port *port, gfp_t mem_flags); int usb_serial_generic_write(struct tty_struct *tty, struct usb_serial_port *port, const unsigned char *buf, int count); void usb_serial_generic_close(struct usb_serial_port *port); int usb_serial_generic_resume(struct usb_serial *serial); unsigned int usb_serial_generic_write_room(struct tty_struct *tty); unsigned int usb_serial_generic_chars_in_buffer(struct tty_struct *tty); void usb_serial_generic_wait_until_sent(struct tty_struct *tty, long timeout); void usb_serial_generic_read_bulk_callback(struct urb *urb); void usb_serial_generic_write_bulk_callback(struct urb *urb); void usb_serial_generic_throttle(struct tty_struct *tty); void usb_serial_generic_unthrottle(struct tty_struct *tty); int usb_serial_generic_tiocmiwait(struct tty_struct *tty, unsigned long arg); int usb_serial_generic_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount); int usb_serial_generic_register(void); void usb_serial_generic_deregister(void); int usb_serial_generic_submit_read_urbs(struct usb_serial_port *port, gfp_t mem_flags); void usb_serial_generic_process_read_urb(struct urb *urb); int usb_serial_generic_prepare_write_buffer(struct usb_serial_port *port, void *dest, size_t size); #if defined(CONFIG_USB_SERIAL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch); int usb_serial_handle_break(struct usb_serial_port *port); #else static inline int usb_serial_handle_sysrq_char(struct usb_serial_port *port, unsigned int ch) { return 0; } static inline int usb_serial_handle_break(struct usb_serial_port *port) { return 0; } #endif void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port, struct tty_struct *tty, unsigned int status); int usb_serial_bus_register(struct usb_serial_driver *device); void usb_serial_bus_deregister(struct usb_serial_driver *device); extern const struct bus_type usb_serial_bus_type; extern struct tty_driver *usb_serial_tty_driver; static inline void usb_serial_debug_data(struct device *dev, const char *function, int size, const unsigned char *data) { dev_dbg(dev, "%s - length = %d, data = %*ph\n", function, size, size, data); } /* * Macro for reporting errors in write path to avoid infinite loop * when port is used as a console. */ #define dev_err_console(usport, fmt, ...) \ do { \ static bool __print_once; \ struct usb_serial_port *__port = (usport); \ \ if (!__port->port.console || !__print_once) { \ __print_once = true; \ dev_err(&__port->dev, fmt, ##__VA_ARGS__); \ } \ } while (0) /* * module_usb_serial_driver() - Helper macro for registering a USB Serial driver * @__serial_drivers: list of usb_serial drivers to register * @__ids: all device ids that @__serial_drivers bind to * * Helper macro for USB serial drivers which do not do anything special * in module init/exit. This eliminates a lot of boilerplate. Each * module may only use this macro once, and calling it replaces * module_init() and module_exit() * */ #define usb_serial_module_driver(__name, __serial_drivers, __ids) \ static int __init usb_serial_module_init(void) \ { \ return usb_serial_register_drivers(__serial_drivers, \ __name, __ids); \ } \ module_init(usb_serial_module_init); \ static void __exit usb_serial_module_exit(void) \ { \ usb_serial_deregister_drivers(__serial_drivers); \ } \ module_exit(usb_serial_module_exit); #define module_usb_serial_driver(__serial_drivers, __ids) \ usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids) #endif /* __LINUX_USB_SERIAL_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1