Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Li Yang | 1346 | 45.95% | 1 | 1.89% |
Timur Tabi | 717 | 24.48% | 5 | 9.43% |
Anton Vorontsov | 518 | 17.69% | 15 | 28.30% |
Zhao Qiang | 112 | 3.82% | 6 | 11.32% |
Scott Wood | 64 | 2.19% | 2 | 3.77% |
Haiying Wang | 44 | 1.50% | 3 | 5.66% |
Rasmus Villemoes | 34 | 1.16% | 6 | 11.32% |
Holger Brunck | 29 | 0.99% | 2 | 3.77% |
Kumar Gala | 25 | 0.85% | 2 | 3.77% |
Christophe Leroy | 13 | 0.44% | 2 | 3.77% |
Dmitry Torokhov | 7 | 0.24% | 1 | 1.89% |
Kokoris, Ioannis | 5 | 0.17% | 1 | 1.89% |
Jes Sorensen | 3 | 0.10% | 1 | 1.89% |
Rob Herring | 3 | 0.10% | 1 | 1.89% |
Thomas Gleixner | 2 | 0.07% | 1 | 1.89% |
Gustavo A. R. Silva | 2 | 0.07% | 1 | 1.89% |
Tejun Heo | 2 | 0.07% | 1 | 1.89% |
Guennadi Liakhovetski | 2 | 0.07% | 1 | 1.89% |
Costa Shulyupin | 1 | 0.03% | 1 | 1.89% |
Total | 2929 | 53 |
/* SPDX-License-Identifier: GPL-2.0-or-later */ /* * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. * * Authors: Shlomi Gridish <gridish@freescale.com> * Li Yang <leoli@freescale.com> * * Description: * QUICC Engine (QE) external definitions and structure. */ #ifndef _ASM_POWERPC_QE_H #define _ASM_POWERPC_QE_H #ifdef __KERNEL__ #include <linux/compiler.h> #include <linux/genalloc.h> #include <linux/spinlock.h> #include <linux/errno.h> #include <linux/err.h> #include <soc/fsl/cpm.h> #include <soc/fsl/qe/immap_qe.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/types.h> #define QE_NUM_OF_SNUM 256 /* There are 256 serial number in QE */ #define QE_NUM_OF_BRGS 16 #define QE_NUM_OF_PORTS 1024 /* Clocks and BRGs */ enum qe_clock { QE_CLK_NONE = 0, QE_BRG1, /* Baud Rate Generator 1 */ QE_BRG2, /* Baud Rate Generator 2 */ QE_BRG3, /* Baud Rate Generator 3 */ QE_BRG4, /* Baud Rate Generator 4 */ QE_BRG5, /* Baud Rate Generator 5 */ QE_BRG6, /* Baud Rate Generator 6 */ QE_BRG7, /* Baud Rate Generator 7 */ QE_BRG8, /* Baud Rate Generator 8 */ QE_BRG9, /* Baud Rate Generator 9 */ QE_BRG10, /* Baud Rate Generator 10 */ QE_BRG11, /* Baud Rate Generator 11 */ QE_BRG12, /* Baud Rate Generator 12 */ QE_BRG13, /* Baud Rate Generator 13 */ QE_BRG14, /* Baud Rate Generator 14 */ QE_BRG15, /* Baud Rate Generator 15 */ QE_BRG16, /* Baud Rate Generator 16 */ QE_CLK1, /* Clock 1 */ QE_CLK2, /* Clock 2 */ QE_CLK3, /* Clock 3 */ QE_CLK4, /* Clock 4 */ QE_CLK5, /* Clock 5 */ QE_CLK6, /* Clock 6 */ QE_CLK7, /* Clock 7 */ QE_CLK8, /* Clock 8 */ QE_CLK9, /* Clock 9 */ QE_CLK10, /* Clock 10 */ QE_CLK11, /* Clock 11 */ QE_CLK12, /* Clock 12 */ QE_CLK13, /* Clock 13 */ QE_CLK14, /* Clock 14 */ QE_CLK15, /* Clock 15 */ QE_CLK16, /* Clock 16 */ QE_CLK17, /* Clock 17 */ QE_CLK18, /* Clock 18 */ QE_CLK19, /* Clock 19 */ QE_CLK20, /* Clock 20 */ QE_CLK21, /* Clock 21 */ QE_CLK22, /* Clock 22 */ QE_CLK23, /* Clock 23 */ QE_CLK24, /* Clock 24 */ QE_RSYNC_PIN, /* RSYNC from pin */ QE_TSYNC_PIN, /* TSYNC from pin */ QE_CLK_DUMMY }; static inline bool qe_clock_is_brg(enum qe_clock clk) { return clk >= QE_BRG1 && clk <= QE_BRG16; } extern spinlock_t cmxgcr_lock; /* Export QE common operations */ #ifdef CONFIG_QUICC_ENGINE extern void qe_reset(void); #else static inline void qe_reset(void) {} #endif int cpm_muram_init(void); #if defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) s32 cpm_muram_alloc(unsigned long size, unsigned long align); void cpm_muram_free(s32 offset); s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size); void __iomem *cpm_muram_addr(unsigned long offset); unsigned long cpm_muram_offset(const void __iomem *addr); dma_addr_t cpm_muram_dma(void __iomem *addr); void cpm_muram_free_addr(const void __iomem *addr); #else static inline s32 cpm_muram_alloc(unsigned long size, unsigned long align) { return -ENOSYS; } static inline void cpm_muram_free(s32 offset) { } static inline s32 cpm_muram_alloc_fixed(unsigned long offset, unsigned long size) { return -ENOSYS; } static inline void __iomem *cpm_muram_addr(unsigned long offset) { return NULL; } static inline unsigned long cpm_muram_offset(const void __iomem *addr) { return -ENOSYS; } static inline dma_addr_t cpm_muram_dma(void __iomem *addr) { return 0; } static inline void cpm_muram_free_addr(const void __iomem *addr) { } #endif /* defined(CONFIG_CPM) || defined(CONFIG_QUICC_ENGINE) */ /* QE PIO */ #define QE_PIO_PINS 32 struct qe_pio_regs { __be32 cpodr; /* Open drain register */ __be32 cpdata; /* Data register */ __be32 cpdir1; /* Direction register */ __be32 cpdir2; /* Direction register */ __be32 cppar1; /* Pin assignment register */ __be32 cppar2; /* Pin assignment register */ #ifdef CONFIG_PPC_85xx u8 pad[8]; #endif }; #define QE_PIO_DIR_IN 2 #define QE_PIO_DIR_OUT 1 extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin, int dir, int open_drain, int assignment, int has_irq); #ifdef CONFIG_QUICC_ENGINE extern int par_io_init(struct device_node *np); extern int par_io_of_config(struct device_node *np); extern int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, int assignment, int has_irq); extern int par_io_data_set(u8 port, u8 pin, u8 val); #else static inline int par_io_init(struct device_node *np) { return -ENOSYS; } static inline int par_io_of_config(struct device_node *np) { return -ENOSYS; } static inline int par_io_config_pin(u8 port, u8 pin, int dir, int open_drain, int assignment, int has_irq) { return -ENOSYS; } static inline int par_io_data_set(u8 port, u8 pin, u8 val) { return -ENOSYS; } #endif /* CONFIG_QUICC_ENGINE */ /* * Pin multiplexing functions. */ struct device; struct qe_pin; #ifdef CONFIG_QE_GPIO extern struct qe_pin *qe_pin_request(struct device *dev, int index); extern void qe_pin_free(struct qe_pin *qe_pin); extern void qe_pin_set_gpio(struct qe_pin *qe_pin); extern void qe_pin_set_dedicated(struct qe_pin *pin); #else static inline struct qe_pin *qe_pin_request(struct device *dev, int index) { return ERR_PTR(-ENOSYS); } static inline void qe_pin_free(struct qe_pin *qe_pin) {} static inline void qe_pin_set_gpio(struct qe_pin *qe_pin) {} static inline void qe_pin_set_dedicated(struct qe_pin *pin) {} #endif /* CONFIG_QE_GPIO */ #ifdef CONFIG_QUICC_ENGINE int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input); #else static inline int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) { return -ENOSYS; } #endif /* CONFIG_QUICC_ENGINE */ /* QE internal API */ enum qe_clock qe_clock_source(const char *source); unsigned int qe_get_brg_clk(void); int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier); int qe_get_snum(void); void qe_put_snum(u8 snum); unsigned int qe_get_num_of_risc(void); unsigned int qe_get_num_of_snums(void); static inline int qe_alive_during_sleep(void) { /* * MPC8568E reference manual says: * * "...power down sequence waits for all I/O interfaces to become idle. * In some applications this may happen eventually without actively * shutting down interfaces, but most likely, software will have to * take steps to shut down the eTSEC, QUICC Engine Block, and PCI * interfaces before issuing the command (either the write to the core * MSR[WE] as described above or writing to POWMGTCSR) to put the * device into sleep state." * * MPC8569E reference manual has a similar paragraph. */ #ifdef CONFIG_PPC_85xx return 0; #else return 1; #endif } /* we actually use cpm_muram implementation, define this for convenience */ #define qe_muram_init cpm_muram_init #define qe_muram_alloc cpm_muram_alloc #define qe_muram_alloc_fixed cpm_muram_alloc_fixed #define qe_muram_free cpm_muram_free #define qe_muram_addr cpm_muram_addr #define qe_muram_offset cpm_muram_offset #define qe_muram_dma cpm_muram_dma #define qe_muram_free_addr cpm_muram_free_addr #define qe_setbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) | (_v), (_addr)) #define qe_clrbits_be32(_addr, _v) iowrite32be(ioread32be(_addr) & ~(_v), (_addr)) #define qe_setbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) | (_v), (_addr)) #define qe_clrbits_be16(_addr, _v) iowrite16be(ioread16be(_addr) & ~(_v), (_addr)) #define qe_setbits_8(_addr, _v) iowrite8(ioread8(_addr) | (_v), (_addr)) #define qe_clrbits_8(_addr, _v) iowrite8(ioread8(_addr) & ~(_v), (_addr)) #define qe_clrsetbits_be32(addr, clear, set) \ iowrite32be((ioread32be(addr) & ~(clear)) | (set), (addr)) #define qe_clrsetbits_be16(addr, clear, set) \ iowrite16be((ioread16be(addr) & ~(clear)) | (set), (addr)) #define qe_clrsetbits_8(addr, clear, set) \ iowrite8((ioread8(addr) & ~(clear)) | (set), (addr)) /* Structure that defines QE firmware binary files. * * See Documentation/arch/powerpc/qe_firmware.rst for a description of these * fields. */ struct qe_firmware { struct qe_header { __be32 length; /* Length of the entire structure, in bytes */ u8 magic[3]; /* Set to { 'Q', 'E', 'F' } */ u8 version; /* Version of this layout. First ver is '1' */ } header; u8 id[62]; /* Null-terminated identifier string */ u8 split; /* 0 = shared I-RAM, 1 = split I-RAM */ u8 count; /* Number of microcode[] structures */ struct { __be16 model; /* The SOC model */ u8 major; /* The SOC revision major */ u8 minor; /* The SOC revision minor */ } __attribute__ ((packed)) soc; u8 padding[4]; /* Reserved, for alignment */ __be64 extended_modes; /* Extended modes */ __be32 vtraps[8]; /* Virtual trap addresses */ u8 reserved[4]; /* Reserved, for future expansion */ struct qe_microcode { u8 id[32]; /* Null-terminated identifier */ __be32 traps[16]; /* Trap addresses, 0 == ignore */ __be32 eccr; /* The value for the ECCR register */ __be32 iram_offset; /* Offset into I-RAM for the code */ __be32 count; /* Number of 32-bit words of the code */ __be32 code_offset; /* Offset of the actual microcode */ u8 major; /* The microcode version major */ u8 minor; /* The microcode version minor */ u8 revision; /* The microcode version revision */ u8 padding; /* Reserved, for alignment */ u8 reserved[4]; /* Reserved, for future expansion */ } __packed microcode[]; /* All microcode binaries should be located here */ /* CRC32 should be located here, after the microcode binaries */ } __attribute__ ((packed)); struct qe_firmware_info { char id[64]; /* Firmware name */ u32 vtraps[8]; /* Virtual trap addresses */ u64 extended_modes; /* Extended modes */ }; #ifdef CONFIG_QUICC_ENGINE /* Upload a firmware to the QE */ int qe_upload_firmware(const struct qe_firmware *firmware); #else static inline int qe_upload_firmware(const struct qe_firmware *firmware) { return -ENOSYS; } #endif /* CONFIG_QUICC_ENGINE */ /* Obtain information on the uploaded firmware */ struct qe_firmware_info *qe_get_firmware_info(void); /* QE USB */ int qe_usb_clock_set(enum qe_clock clk, int rate); /* Buffer descriptors */ struct qe_bd { __be16 status; __be16 length; __be32 buf; } __attribute__ ((packed)); #define BD_STATUS_MASK 0xffff0000 #define BD_LENGTH_MASK 0x0000ffff /* Alignment */ #define QE_INTR_TABLE_ALIGN 16 /* ??? */ #define QE_ALIGNMENT_OF_BD 8 #define QE_ALIGNMENT_OF_PRAM 64 /* RISC allocation */ #define QE_RISC_ALLOCATION_RISC1 0x1 /* RISC 1 */ #define QE_RISC_ALLOCATION_RISC2 0x2 /* RISC 2 */ #define QE_RISC_ALLOCATION_RISC3 0x4 /* RISC 3 */ #define QE_RISC_ALLOCATION_RISC4 0x8 /* RISC 4 */ #define QE_RISC_ALLOCATION_RISC1_AND_RISC2 (QE_RISC_ALLOCATION_RISC1 | \ QE_RISC_ALLOCATION_RISC2) #define QE_RISC_ALLOCATION_FOUR_RISCS (QE_RISC_ALLOCATION_RISC1 | \ QE_RISC_ALLOCATION_RISC2 | \ QE_RISC_ALLOCATION_RISC3 | \ QE_RISC_ALLOCATION_RISC4) /* QE extended filtering Table Lookup Key Size */ enum qe_fltr_tbl_lookup_key_size { QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES = 0x3f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 8 bytes */ QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES = 0x5f, /* LookupKey parsed by the Generate LookupKey CMD is truncated to 16 bytes */ }; /* QE FLTR extended filtering Largest External Table Lookup Key Size */ enum qe_fltr_largest_external_tbl_lookup_key_size { QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_NONE = 0x0,/* not used */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_8_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_8_BYTES, /* 8 bytes */ QE_FLTR_LARGEST_EXTERNAL_TABLE_LOOKUP_KEY_SIZE_16_BYTES = QE_FLTR_TABLE_LOOKUP_KEY_SIZE_16_BYTES, /* 16 bytes */ }; /* structure representing QE parameter RAM */ struct qe_timer_tables { u16 tm_base; /* QE timer table base adr */ u16 tm_ptr; /* QE timer table pointer */ u16 r_tmr; /* QE timer mode register */ u16 r_tmv; /* QE timer valid register */ u32 tm_cmd; /* QE timer cmd register */ u32 tm_cnt; /* QE timer internal cnt */ } __attribute__ ((packed)); #define QE_FLTR_TAD_SIZE 8 /* QE extended filtering Termination Action Descriptor (TAD) */ struct qe_fltr_tad { u8 serialized[QE_FLTR_TAD_SIZE]; } __attribute__ ((packed)); /* Communication Direction */ enum comm_dir { COMM_DIR_NONE = 0, COMM_DIR_RX = 1, COMM_DIR_TX = 2, COMM_DIR_RX_AND_TX = 3 }; /* QE CMXUCR Registers. * There are two UCCs represented in each of the four CMXUCR registers. * These values are for the UCC in the LSBs */ #define QE_CMXUCR_MII_ENET_MNG 0x00007000 #define QE_CMXUCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXUCR_GRANT 0x00008000 #define QE_CMXUCR_TSA 0x00004000 #define QE_CMXUCR_BKPT 0x00000100 #define QE_CMXUCR_TX_CLK_SRC_MASK 0x0000000F /* QE CMXGCR Registers. */ #define QE_CMXGCR_MII_ENET_MNG 0x00007000 #define QE_CMXGCR_MII_ENET_MNG_SHIFT 12 #define QE_CMXGCR_USBCS 0x0000000f #define QE_CMXGCR_USBCS_CLK3 0x1 #define QE_CMXGCR_USBCS_CLK5 0x2 #define QE_CMXGCR_USBCS_CLK7 0x3 #define QE_CMXGCR_USBCS_CLK9 0x4 #define QE_CMXGCR_USBCS_CLK13 0x5 #define QE_CMXGCR_USBCS_CLK17 0x6 #define QE_CMXGCR_USBCS_CLK19 0x7 #define QE_CMXGCR_USBCS_CLK21 0x8 #define QE_CMXGCR_USBCS_BRG9 0x9 #define QE_CMXGCR_USBCS_BRG10 0xa /* QE CECR Commands. */ #define QE_CR_FLG 0x00010000 #define QE_RESET 0x80000000 #define QE_INIT_TX_RX 0x00000000 #define QE_INIT_RX 0x00000001 #define QE_INIT_TX 0x00000002 #define QE_ENTER_HUNT_MODE 0x00000003 #define QE_STOP_TX 0x00000004 #define QE_GRACEFUL_STOP_TX 0x00000005 #define QE_RESTART_TX 0x00000006 #define QE_CLOSE_RX_BD 0x00000007 #define QE_SWITCH_COMMAND 0x00000007 #define QE_SET_GROUP_ADDRESS 0x00000008 #define QE_START_IDMA 0x00000009 #define QE_MCC_STOP_RX 0x00000009 #define QE_ATM_TRANSMIT 0x0000000a #define QE_HPAC_CLEAR_ALL 0x0000000b #define QE_GRACEFUL_STOP_RX 0x0000001a #define QE_RESTART_RX 0x0000001b #define QE_HPAC_SET_PRIORITY 0x0000010b #define QE_HPAC_STOP_TX 0x0000020b #define QE_HPAC_STOP_RX 0x0000030b #define QE_HPAC_GRACEFUL_STOP_TX 0x0000040b #define QE_HPAC_GRACEFUL_STOP_RX 0x0000050b #define QE_HPAC_START_TX 0x0000060b #define QE_HPAC_START_RX 0x0000070b #define QE_USB_STOP_TX 0x0000000a #define QE_USB_RESTART_TX 0x0000000c #define QE_QMC_STOP_TX 0x0000000c #define QE_QMC_STOP_RX 0x0000000d #define QE_SS7_SU_FIL_RESET 0x0000000e /* jonathbr added from here down for 83xx */ #define QE_RESET_BCS 0x0000000a #define QE_MCC_INIT_TX_RX_16 0x00000003 #define QE_MCC_STOP_TX 0x00000004 #define QE_MCC_INIT_TX_1 0x00000005 #define QE_MCC_INIT_RX_1 0x00000006 #define QE_MCC_RESET 0x00000007 #define QE_SET_TIMER 0x00000008 #define QE_RANDOM_NUMBER 0x0000000c #define QE_ATM_MULTI_THREAD_INIT 0x00000011 #define QE_ASSIGN_PAGE 0x00000012 #define QE_ADD_REMOVE_HASH_ENTRY 0x00000013 #define QE_START_FLOW_CONTROL 0x00000014 #define QE_STOP_FLOW_CONTROL 0x00000015 #define QE_ASSIGN_PAGE_TO_DEVICE 0x00000016 #define QE_ASSIGN_RISC 0x00000010 #define QE_CR_MCN_NORMAL_SHIFT 6 #define QE_CR_MCN_USB_SHIFT 4 #define QE_CR_MCN_RISC_ASSIGN_SHIFT 8 #define QE_CR_SNUM_SHIFT 17 /* QE CECR Sub Block - sub block of QE command. */ #define QE_CR_SUBBLOCK_INVALID 0x00000000 #define QE_CR_SUBBLOCK_USB 0x03200000 #define QE_CR_SUBBLOCK_UCCFAST1 0x02000000 #define QE_CR_SUBBLOCK_UCCFAST2 0x02200000 #define QE_CR_SUBBLOCK_UCCFAST3 0x02400000 #define QE_CR_SUBBLOCK_UCCFAST4 0x02600000 #define QE_CR_SUBBLOCK_UCCFAST5 0x02800000 #define QE_CR_SUBBLOCK_UCCFAST6 0x02a00000 #define QE_CR_SUBBLOCK_UCCFAST7 0x02c00000 #define QE_CR_SUBBLOCK_UCCFAST8 0x02e00000 #define QE_CR_SUBBLOCK_UCCSLOW1 0x00000000 #define QE_CR_SUBBLOCK_UCCSLOW2 0x00200000 #define QE_CR_SUBBLOCK_UCCSLOW3 0x00400000 #define QE_CR_SUBBLOCK_UCCSLOW4 0x00600000 #define QE_CR_SUBBLOCK_UCCSLOW5 0x00800000 #define QE_CR_SUBBLOCK_UCCSLOW6 0x00a00000 #define QE_CR_SUBBLOCK_UCCSLOW7 0x00c00000 #define QE_CR_SUBBLOCK_UCCSLOW8 0x00e00000 #define QE_CR_SUBBLOCK_MCC1 0x03800000 #define QE_CR_SUBBLOCK_MCC2 0x03a00000 #define QE_CR_SUBBLOCK_MCC3 0x03000000 #define QE_CR_SUBBLOCK_IDMA1 0x02800000 #define QE_CR_SUBBLOCK_IDMA2 0x02a00000 #define QE_CR_SUBBLOCK_IDMA3 0x02c00000 #define QE_CR_SUBBLOCK_IDMA4 0x02e00000 #define QE_CR_SUBBLOCK_HPAC 0x01e00000 #define QE_CR_SUBBLOCK_SPI1 0x01400000 #define QE_CR_SUBBLOCK_SPI2 0x01600000 #define QE_CR_SUBBLOCK_RAND 0x01c00000 #define QE_CR_SUBBLOCK_TIMER 0x01e00000 #define QE_CR_SUBBLOCK_GENERAL 0x03c00000 /* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */ #define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */ #define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00 #define QE_CR_PROTOCOL_QMC 0x02 #define QE_CR_PROTOCOL_UART 0x04 #define QE_CR_PROTOCOL_ATM_POS 0x0A #define QE_CR_PROTOCOL_ETHERNET 0x0C #define QE_CR_PROTOCOL_L2_SWITCH 0x0D /* BRG configuration register */ #define QE_BRGC_ENABLE 0x00010000 #define QE_BRGC_DIVISOR_SHIFT 1 #define QE_BRGC_DIVISOR_MAX 0xFFF #define QE_BRGC_DIV16 1 /* QE Timers registers */ #define QE_GTCFR1_PCAS 0x80 #define QE_GTCFR1_STP2 0x20 #define QE_GTCFR1_RST2 0x10 #define QE_GTCFR1_GM2 0x08 #define QE_GTCFR1_GM1 0x04 #define QE_GTCFR1_STP1 0x02 #define QE_GTCFR1_RST1 0x01 /* SDMA registers */ #define QE_SDSR_BER1 0x02000000 #define QE_SDSR_BER2 0x01000000 #define QE_SDMR_GLB_1_MSK 0x80000000 #define QE_SDMR_ADR_SEL 0x20000000 #define QE_SDMR_BER1_MSK 0x02000000 #define QE_SDMR_BER2_MSK 0x01000000 #define QE_SDMR_EB1_MSK 0x00800000 #define QE_SDMR_ER1_MSK 0x00080000 #define QE_SDMR_ER2_MSK 0x00040000 #define QE_SDMR_CEN_MASK 0x0000E000 #define QE_SDMR_SBER_1 0x00000200 #define QE_SDMR_SBER_2 0x00000200 #define QE_SDMR_EB1_PR_MASK 0x000000C0 #define QE_SDMR_ER1_PR 0x00000008 #define QE_SDMR_CEN_SHIFT 13 #define QE_SDMR_EB1_PR_SHIFT 6 #define QE_SDTM_MSNUM_SHIFT 24 #define QE_SDEBCR_BA_MASK 0x01FFFFFF /* Communication Processor */ #define QE_CP_CERCR_MEE 0x8000 /* Multi-user RAM ECC enable */ #define QE_CP_CERCR_IEE 0x4000 /* Instruction RAM ECC enable */ #define QE_CP_CERCR_CIR 0x0800 /* Common instruction RAM */ /* I-RAM */ #define QE_IRAM_IADD_AIE 0x80000000 /* Auto Increment Enable */ #define QE_IRAM_IADD_BADDR 0x00080000 /* Base Address */ #define QE_IRAM_READY 0x80000000 /* Ready */ /* UPC */ #define UPGCR_PROTOCOL 0x80000000 /* protocol ul2 or pl2 */ #define UPGCR_TMS 0x40000000 /* Transmit master/slave mode */ #define UPGCR_RMS 0x20000000 /* Receive master/slave mode */ #define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */ #define UPGCR_DIAG 0x01000000 /* Diagnostic mode */ /* UCC GUEMR register */ #define UCC_GUEMR_MODE_MASK_RX 0x02 #define UCC_GUEMR_MODE_FAST_RX 0x02 #define UCC_GUEMR_MODE_SLOW_RX 0x00 #define UCC_GUEMR_MODE_MASK_TX 0x01 #define UCC_GUEMR_MODE_FAST_TX 0x01 #define UCC_GUEMR_MODE_SLOW_TX 0x00 #define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX) #define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but must be set 1 */ /* structure representing UCC SLOW parameter RAM */ struct ucc_slow_pram { __be16 rbase; /* RX BD base address */ __be16 tbase; /* TX BD base address */ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */ __be16 mrblr; /* Rx buffer length */ __be32 rstate; /* Rx internal state */ __be32 rptr; /* Rx internal data pointer */ __be16 rbptr; /* rb BD Pointer */ __be16 rcount; /* Rx internal byte count */ __be32 rtemp; /* Rx temp */ __be32 tstate; /* Tx internal state */ __be32 tptr; /* Tx internal data pointer */ __be16 tbptr; /* Tx BD pointer */ __be16 tcount; /* Tx byte count */ __be32 ttemp; /* Tx temp */ __be32 rcrc; /* temp receive CRC */ __be32 tcrc; /* temp transmit CRC */ } __attribute__ ((packed)); /* General UCC SLOW Mode Register (GUMRH & GUMRL) */ #define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000 #define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000 #define UCC_SLOW_GUMR_H_REVD 0x00002000 #define UCC_SLOW_GUMR_H_TRX 0x00001000 #define UCC_SLOW_GUMR_H_TTX 0x00000800 #define UCC_SLOW_GUMR_H_CDP 0x00000400 #define UCC_SLOW_GUMR_H_CTSP 0x00000200 #define UCC_SLOW_GUMR_H_CDS 0x00000100 #define UCC_SLOW_GUMR_H_CTSS 0x00000080 #define UCC_SLOW_GUMR_H_TFL 0x00000040 #define UCC_SLOW_GUMR_H_RFW 0x00000020 #define UCC_SLOW_GUMR_H_TXSY 0x00000010 #define UCC_SLOW_GUMR_H_4SYNC 0x00000004 #define UCC_SLOW_GUMR_H_8SYNC 0x00000008 #define UCC_SLOW_GUMR_H_16SYNC 0x0000000c #define UCC_SLOW_GUMR_H_RTSM 0x00000002 #define UCC_SLOW_GUMR_H_RSYN 0x00000001 #define UCC_SLOW_GUMR_L_TCI 0x10000000 #define UCC_SLOW_GUMR_L_RINV 0x02000000 #define UCC_SLOW_GUMR_L_TINV 0x01000000 #define UCC_SLOW_GUMR_L_TEND 0x00040000 #define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000 #define UCC_SLOW_GUMR_L_TDCR_32 0x00030000 #define UCC_SLOW_GUMR_L_TDCR_16 0x00020000 #define UCC_SLOW_GUMR_L_TDCR_8 0x00010000 #define UCC_SLOW_GUMR_L_TDCR_1 0x00000000 #define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000 #define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000 #define UCC_SLOW_GUMR_L_RDCR_16 0x00008000 #define UCC_SLOW_GUMR_L_RDCR_8 0x00004000 #define UCC_SLOW_GUMR_L_RDCR_1 0x00000000 #define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800 #define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000 #define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100 #define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000 #define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0 #define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0 #define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080 #define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040 #define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000 #define UCC_SLOW_GUMR_L_ENR 0x00000020 #define UCC_SLOW_GUMR_L_ENT 0x00000010 #define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F #define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008 #define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006 #define UCC_SLOW_GUMR_L_MODE_UART 0x00000004 #define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002 /* General UCC FAST Mode Register */ #define UCC_FAST_GUMR_LOOPBACK 0x40000000 #define UCC_FAST_GUMR_TCI 0x20000000 #define UCC_FAST_GUMR_TRX 0x10000000 #define UCC_FAST_GUMR_TTX 0x08000000 #define UCC_FAST_GUMR_CDP 0x04000000 #define UCC_FAST_GUMR_CTSP 0x02000000 #define UCC_FAST_GUMR_CDS 0x01000000 #define UCC_FAST_GUMR_CTSS 0x00800000 #define UCC_FAST_GUMR_TXSY 0x00020000 #define UCC_FAST_GUMR_RSYN 0x00010000 #define UCC_FAST_GUMR_SYNL_MASK 0x0000C000 #define UCC_FAST_GUMR_SYNL_16 0x0000C000 #define UCC_FAST_GUMR_SYNL_8 0x00008000 #define UCC_FAST_GUMR_SYNL_AUTO 0x00004000 #define UCC_FAST_GUMR_RTSM 0x00002000 #define UCC_FAST_GUMR_REVD 0x00000400 #define UCC_FAST_GUMR_ENR 0x00000020 #define UCC_FAST_GUMR_ENT 0x00000010 /* UART Slow UCC Event Register (UCCE) */ #define UCC_UART_UCCE_AB 0x0200 #define UCC_UART_UCCE_IDLE 0x0100 #define UCC_UART_UCCE_GRA 0x0080 #define UCC_UART_UCCE_BRKE 0x0040 #define UCC_UART_UCCE_BRKS 0x0020 #define UCC_UART_UCCE_CCR 0x0008 #define UCC_UART_UCCE_BSY 0x0004 #define UCC_UART_UCCE_TX 0x0002 #define UCC_UART_UCCE_RX 0x0001 /* HDLC Slow UCC Event Register (UCCE) */ #define UCC_HDLC_UCCE_GLR 0x1000 #define UCC_HDLC_UCCE_GLT 0x0800 #define UCC_HDLC_UCCE_IDLE 0x0100 #define UCC_HDLC_UCCE_BRKE 0x0040 #define UCC_HDLC_UCCE_BRKS 0x0020 #define UCC_HDLC_UCCE_TXE 0x0010 #define UCC_HDLC_UCCE_RXF 0x0008 #define UCC_HDLC_UCCE_BSY 0x0004 #define UCC_HDLC_UCCE_TXB 0x0002 #define UCC_HDLC_UCCE_RXB 0x0001 /* BISYNC Slow UCC Event Register (UCCE) */ #define UCC_BISYNC_UCCE_GRA 0x0080 #define UCC_BISYNC_UCCE_TXE 0x0010 #define UCC_BISYNC_UCCE_RCH 0x0008 #define UCC_BISYNC_UCCE_BSY 0x0004 #define UCC_BISYNC_UCCE_TXB 0x0002 #define UCC_BISYNC_UCCE_RXB 0x0001 /* Gigabit Ethernet Fast UCC Event Register (UCCE) */ #define UCC_GETH_UCCE_MPD 0x80000000 #define UCC_GETH_UCCE_SCAR 0x40000000 #define UCC_GETH_UCCE_GRA 0x20000000 #define UCC_GETH_UCCE_CBPR 0x10000000 #define UCC_GETH_UCCE_BSY 0x08000000 #define UCC_GETH_UCCE_RXC 0x04000000 #define UCC_GETH_UCCE_TXC 0x02000000 #define UCC_GETH_UCCE_TXE 0x01000000 #define UCC_GETH_UCCE_TXB7 0x00800000 #define UCC_GETH_UCCE_TXB6 0x00400000 #define UCC_GETH_UCCE_TXB5 0x00200000 #define UCC_GETH_UCCE_TXB4 0x00100000 #define UCC_GETH_UCCE_TXB3 0x00080000 #define UCC_GETH_UCCE_TXB2 0x00040000 #define UCC_GETH_UCCE_TXB1 0x00020000 #define UCC_GETH_UCCE_TXB0 0x00010000 #define UCC_GETH_UCCE_RXB7 0x00008000 #define UCC_GETH_UCCE_RXB6 0x00004000 #define UCC_GETH_UCCE_RXB5 0x00002000 #define UCC_GETH_UCCE_RXB4 0x00001000 #define UCC_GETH_UCCE_RXB3 0x00000800 #define UCC_GETH_UCCE_RXB2 0x00000400 #define UCC_GETH_UCCE_RXB1 0x00000200 #define UCC_GETH_UCCE_RXB0 0x00000100 #define UCC_GETH_UCCE_RXF7 0x00000080 #define UCC_GETH_UCCE_RXF6 0x00000040 #define UCC_GETH_UCCE_RXF5 0x00000020 #define UCC_GETH_UCCE_RXF4 0x00000010 #define UCC_GETH_UCCE_RXF3 0x00000008 #define UCC_GETH_UCCE_RXF2 0x00000004 #define UCC_GETH_UCCE_RXF1 0x00000002 #define UCC_GETH_UCCE_RXF0 0x00000001 /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */ #define UCC_UART_UPSMR_FLC 0x8000 #define UCC_UART_UPSMR_SL 0x4000 #define UCC_UART_UPSMR_CL_MASK 0x3000 #define UCC_UART_UPSMR_CL_8 0x3000 #define UCC_UART_UPSMR_CL_7 0x2000 #define UCC_UART_UPSMR_CL_6 0x1000 #define UCC_UART_UPSMR_CL_5 0x0000 #define UCC_UART_UPSMR_UM_MASK 0x0c00 #define UCC_UART_UPSMR_UM_NORMAL 0x0000 #define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400 #define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00 #define UCC_UART_UPSMR_FRZ 0x0200 #define UCC_UART_UPSMR_RZS 0x0100 #define UCC_UART_UPSMR_SYN 0x0080 #define UCC_UART_UPSMR_DRT 0x0040 #define UCC_UART_UPSMR_PEN 0x0010 #define UCC_UART_UPSMR_RPM_MASK 0x000c #define UCC_UART_UPSMR_RPM_ODD 0x0000 #define UCC_UART_UPSMR_RPM_LOW 0x0004 #define UCC_UART_UPSMR_RPM_EVEN 0x0008 #define UCC_UART_UPSMR_RPM_HIGH 0x000C #define UCC_UART_UPSMR_TPM_MASK 0x0003 #define UCC_UART_UPSMR_TPM_ODD 0x0000 #define UCC_UART_UPSMR_TPM_LOW 0x0001 #define UCC_UART_UPSMR_TPM_EVEN 0x0002 #define UCC_UART_UPSMR_TPM_HIGH 0x0003 /* UCC Protocol Specific Mode Register (UPSMR), when used for Ethernet */ #define UCC_GETH_UPSMR_FTFE 0x80000000 #define UCC_GETH_UPSMR_PTPE 0x40000000 #define UCC_GETH_UPSMR_ECM 0x04000000 #define UCC_GETH_UPSMR_HSE 0x02000000 #define UCC_GETH_UPSMR_PRO 0x00400000 #define UCC_GETH_UPSMR_CAP 0x00200000 #define UCC_GETH_UPSMR_RSH 0x00100000 #define UCC_GETH_UPSMR_RPM 0x00080000 #define UCC_GETH_UPSMR_R10M 0x00040000 #define UCC_GETH_UPSMR_RLPB 0x00020000 #define UCC_GETH_UPSMR_TBIM 0x00010000 #define UCC_GETH_UPSMR_RES1 0x00002000 #define UCC_GETH_UPSMR_RMM 0x00001000 #define UCC_GETH_UPSMR_CAM 0x00000400 #define UCC_GETH_UPSMR_BRO 0x00000200 #define UCC_GETH_UPSMR_SMM 0x00000080 #define UCC_GETH_UPSMR_SGMM 0x00000020 /* UCC Protocol Specific Mode Register (UPSMR), when used for HDLC */ #define UCC_HDLC_UPSMR_RTE 0x02000000 #define UCC_HDLC_UPSMR_BUS 0x00200000 #define UCC_HDLC_UPSMR_CW8 0x00007000 /* UCC Transmit On Demand Register (UTODR) */ #define UCC_SLOW_TOD 0x8000 #define UCC_FAST_TOD 0x8000 /* UCC Bus Mode Register masks */ /* Not to be confused with the Bundle Mode Register */ #define UCC_BMR_GBL 0x20 #define UCC_BMR_BO_BE 0x10 #define UCC_BMR_CETM 0x04 #define UCC_BMR_DTB 0x02 #define UCC_BMR_BDB 0x01 /* Function code masks */ #define FC_GBL 0x20 #define FC_DTB_LCL 0x02 #define UCC_FAST_FUNCTION_CODE_GBL 0x20 #define UCC_FAST_FUNCTION_CODE_DTB_LCL 0x02 #define UCC_FAST_FUNCTION_CODE_BDB_LCL 0x01 #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_QE_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1