Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Vladimir Oltean | 634 | 85.44% | 19 | 65.52% |
Yangbo Lu | 35 | 4.72% | 3 | 10.34% |
Linus Torvalds (pre-git) | 32 | 4.31% | 3 | 10.34% |
Xiaoliang Yang | 24 | 3.23% | 1 | 3.45% |
Florian Fainelli | 12 | 1.62% | 2 | 6.90% |
Jakub Kiciński | 5 | 0.67% | 1 | 3.45% |
Total | 742 | 29 |
// SPDX-License-Identifier: GPL-2.0 /* Copyright 2019 NXP */ #include <linux/dsa/ocelot.h> #include "tag.h" #define OCELOT_NAME "ocelot" #define SEVILLE_NAME "seville" static void ocelot_xmit_common(struct sk_buff *skb, struct net_device *netdev, __be32 ifh_prefix, void **ifh) { struct dsa_port *dp = dsa_user_to_port(netdev); struct dsa_switch *ds = dp->ds; u64 vlan_tci, tag_type; void *injection; __be32 *prefix; u32 rew_op = 0; u64 qos_class; ocelot_xmit_get_vlan_info(skb, dsa_port_bridge_dev_get(dp), &vlan_tci, &tag_type); qos_class = netdev_get_num_tc(netdev) ? netdev_get_prio_tc_map(netdev, skb->priority) : skb->priority; injection = skb_push(skb, OCELOT_TAG_LEN); prefix = skb_push(skb, OCELOT_SHORT_PREFIX_LEN); *prefix = ifh_prefix; memset(injection, 0, OCELOT_TAG_LEN); ocelot_ifh_set_bypass(injection, 1); ocelot_ifh_set_src(injection, ds->num_ports); ocelot_ifh_set_qos_class(injection, qos_class); ocelot_ifh_set_vlan_tci(injection, vlan_tci); ocelot_ifh_set_tag_type(injection, tag_type); rew_op = ocelot_ptp_rew_op(skb); if (rew_op) ocelot_ifh_set_rew_op(injection, rew_op); *ifh = injection; } static struct sk_buff *ocelot_xmit(struct sk_buff *skb, struct net_device *netdev) { struct dsa_port *dp = dsa_user_to_port(netdev); void *injection; ocelot_xmit_common(skb, netdev, cpu_to_be32(0x8880000a), &injection); ocelot_ifh_set_dest(injection, BIT_ULL(dp->index)); return skb; } static struct sk_buff *seville_xmit(struct sk_buff *skb, struct net_device *netdev) { struct dsa_port *dp = dsa_user_to_port(netdev); void *injection; ocelot_xmit_common(skb, netdev, cpu_to_be32(0x88800005), &injection); seville_ifh_set_dest(injection, BIT_ULL(dp->index)); return skb; } static struct sk_buff *ocelot_rcv(struct sk_buff *skb, struct net_device *netdev) { u64 src_port, qos_class; u64 vlan_tci, tag_type; u8 *start = skb->data; struct dsa_port *dp; u8 *extraction; u16 vlan_tpid; u64 rew_val; /* Revert skb->data by the amount consumed by the DSA conduit, * so it points to the beginning of the frame. */ skb_push(skb, ETH_HLEN); /* We don't care about the short prefix, it is just for easy entrance * into the DSA conduit's RX filter. Discard it now by moving it into * the headroom. */ skb_pull(skb, OCELOT_SHORT_PREFIX_LEN); /* And skb->data now points to the extraction frame header. * Keep a pointer to it. */ extraction = skb->data; /* Now the EFH is part of the headroom as well */ skb_pull(skb, OCELOT_TAG_LEN); /* Reset the pointer to the real MAC header */ skb_reset_mac_header(skb); skb_reset_mac_len(skb); /* And move skb->data to the correct location again */ skb_pull(skb, ETH_HLEN); /* Remove from inet csum the extraction header */ skb_postpull_rcsum(skb, start, OCELOT_TOTAL_TAG_LEN); ocelot_xfh_get_src_port(extraction, &src_port); ocelot_xfh_get_qos_class(extraction, &qos_class); ocelot_xfh_get_tag_type(extraction, &tag_type); ocelot_xfh_get_vlan_tci(extraction, &vlan_tci); ocelot_xfh_get_rew_val(extraction, &rew_val); skb->dev = dsa_conduit_find_user(netdev, 0, src_port); if (!skb->dev) /* The switch will reflect back some frames sent through * sockets opened on the bare DSA conduit. These will come back * with src_port equal to the index of the CPU port, for which * there is no user registered. So don't print any error * message here (ignore and drop those frames). */ return NULL; dsa_default_offload_fwd_mark(skb); skb->priority = qos_class; OCELOT_SKB_CB(skb)->tstamp_lo = rew_val; /* Ocelot switches copy frames unmodified to the CPU. However, it is * possible for the user to request a VLAN modification through * VCAP_IS1_ACT_VID_REPLACE_ENA. In this case, what will happen is that * the VLAN ID field from the Extraction Header gets updated, but the * 802.1Q header does not (the classified VLAN only becomes visible on * egress through the "port tag" of front-panel ports). * So, for traffic extracted by the CPU, we want to pick up the * classified VLAN and manually replace the existing 802.1Q header from * the packet with it, so that the operating system is always up to * date with the result of tc-vlan actions. * NOTE: In VLAN-unaware mode, we don't want to do that, we want the * frame to remain unmodified, because the classified VLAN is always * equal to the pvid of the ingress port and should not be used for * processing. */ dp = dsa_user_to_port(skb->dev); vlan_tpid = tag_type ? ETH_P_8021AD : ETH_P_8021Q; if (dsa_port_is_vlan_filtering(dp) && eth_hdr(skb)->h_proto == htons(vlan_tpid)) { u16 dummy_vlan_tci; skb_push_rcsum(skb, ETH_HLEN); __skb_vlan_pop(skb, &dummy_vlan_tci); skb_pull_rcsum(skb, ETH_HLEN); __vlan_hwaccel_put_tag(skb, htons(vlan_tpid), vlan_tci); } return skb; } static const struct dsa_device_ops ocelot_netdev_ops = { .name = OCELOT_NAME, .proto = DSA_TAG_PROTO_OCELOT, .xmit = ocelot_xmit, .rcv = ocelot_rcv, .needed_headroom = OCELOT_TOTAL_TAG_LEN, .promisc_on_conduit = true, }; DSA_TAG_DRIVER(ocelot_netdev_ops); MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_OCELOT, OCELOT_NAME); static const struct dsa_device_ops seville_netdev_ops = { .name = SEVILLE_NAME, .proto = DSA_TAG_PROTO_SEVILLE, .xmit = seville_xmit, .rcv = ocelot_rcv, .needed_headroom = OCELOT_TOTAL_TAG_LEN, .promisc_on_conduit = true, }; DSA_TAG_DRIVER(seville_netdev_ops); MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_SEVILLE, SEVILLE_NAME); static struct dsa_tag_driver *ocelot_tag_driver_array[] = { &DSA_TAG_DRIVER_NAME(ocelot_netdev_ops), &DSA_TAG_DRIVER_NAME(seville_netdev_ops), }; module_dsa_tag_drivers(ocelot_tag_driver_array); MODULE_DESCRIPTION("DSA tag driver for Ocelot family of switches, using NPI port"); MODULE_LICENSE("GPL v2");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1