Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Danielle Ratson | 2516 | 97.78% | 2 | 28.57% |
Linus Torvalds (pre-git) | 30 | 1.17% | 2 | 28.57% |
Michal Kubeček | 15 | 0.58% | 1 | 14.29% |
Ido Schimmel | 6 | 0.23% | 1 | 14.29% |
David Decotigny | 6 | 0.23% | 1 | 14.29% |
Total | 2573 | 7 |
// SPDX-License-Identifier: GPL-2.0-only #include <linux/ethtool.h> #include <linux/jiffies.h> #include "common.h" #include "module_fw.h" #include "cmis.h" /* For accessing the LPL field on page 9Fh, the allowable length extension is * min(i, 15) byte octets where i specifies the allowable additional number of * byte octets in a READ or a WRITE. */ u32 ethtool_cmis_get_max_payload_size(u8 num_of_byte_octs) { return 8 * (1 + min_t(u8, num_of_byte_octs, 15)); } void ethtool_cmis_cdb_compose_args(struct ethtool_cmis_cdb_cmd_args *args, enum ethtool_cmis_cdb_cmd_id cmd, u8 *pl, u8 lpl_len, u16 max_duration, u8 read_write_len_ext, u16 msleep_pre_rpl, u8 rpl_exp_len, u8 flags) { args->req.id = cpu_to_be16(cmd); args->req.lpl_len = lpl_len; if (pl) memcpy(args->req.payload, pl, args->req.lpl_len); args->max_duration = max_duration; args->read_write_len_ext = ethtool_cmis_get_max_payload_size(read_write_len_ext); args->msleep_pre_rpl = msleep_pre_rpl; args->rpl_exp_len = rpl_exp_len; args->flags = flags; args->err_msg = NULL; } void ethtool_cmis_page_init(struct ethtool_module_eeprom *page_data, u8 page, u32 offset, u32 length) { page_data->page = page; page_data->offset = offset; page_data->length = length; page_data->i2c_address = ETHTOOL_CMIS_CDB_PAGE_I2C_ADDR; } #define CMIS_REVISION_PAGE 0x00 #define CMIS_REVISION_OFFSET 0x01 struct cmis_rev_rpl { u8 rev; }; static u8 cmis_rev_rpl_major(struct cmis_rev_rpl *rpl) { return rpl->rev >> 4; } static int cmis_rev_major_get(struct net_device *dev, u8 *rev_major) { const struct ethtool_ops *ops = dev->ethtool_ops; struct ethtool_module_eeprom page_data = {0}; struct netlink_ext_ack extack = {}; struct cmis_rev_rpl rpl = {}; int err; ethtool_cmis_page_init(&page_data, CMIS_REVISION_PAGE, CMIS_REVISION_OFFSET, sizeof(rpl)); page_data.data = (u8 *)&rpl; err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); if (err < 0) { if (extack._msg) netdev_err(dev, "%s\n", extack._msg); return err; } *rev_major = cmis_rev_rpl_major(&rpl); return 0; } #define CMIS_CDB_ADVERTISEMENT_PAGE 0x01 #define CMIS_CDB_ADVERTISEMENT_OFFSET 0xA3 /* Based on section 8.4.11 "CDB Messaging Support Advertisement" in CMIS * standard revision 5.2. */ struct cmis_cdb_advert_rpl { u8 inst_supported; u8 read_write_len_ext; u8 resv1; u8 resv2; }; static u8 cmis_cdb_advert_rpl_inst_supported(struct cmis_cdb_advert_rpl *rpl) { return rpl->inst_supported >> 6; } static int cmis_cdb_advertisement_get(struct ethtool_cmis_cdb *cdb, struct net_device *dev) { const struct ethtool_ops *ops = dev->ethtool_ops; struct ethtool_module_eeprom page_data = {}; struct cmis_cdb_advert_rpl rpl = {}; struct netlink_ext_ack extack = {}; int err; ethtool_cmis_page_init(&page_data, CMIS_CDB_ADVERTISEMENT_PAGE, CMIS_CDB_ADVERTISEMENT_OFFSET, sizeof(rpl)); page_data.data = (u8 *)&rpl; err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); if (err < 0) { if (extack._msg) netdev_err(dev, "%s\n", extack._msg); return err; } if (!cmis_cdb_advert_rpl_inst_supported(&rpl)) return -EOPNOTSUPP; cdb->read_write_len_ext = rpl.read_write_len_ext; return 0; } #define CMIS_PASSWORD_ENTRY_PAGE 0x00 #define CMIS_PASSWORD_ENTRY_OFFSET 0x7A struct cmis_password_entry_pl { __be32 password; }; /* See section 9.3.1 "CMD 0000h: Query Status" in CMIS standard revision 5.2. * struct cmis_cdb_query_status_pl and struct cmis_cdb_query_status_rpl are * structured layouts of the flat arrays, * struct ethtool_cmis_cdb_request::payload and * struct ethtool_cmis_cdb_rpl::payload respectively. */ struct cmis_cdb_query_status_pl { u16 response_delay; }; struct cmis_cdb_query_status_rpl { u8 length; u8 status; }; static int cmis_cdb_validate_password(struct ethtool_cmis_cdb *cdb, struct net_device *dev, const struct ethtool_module_fw_flash_params *params, struct ethnl_module_fw_flash_ntf_params *ntf_params) { const struct ethtool_ops *ops = dev->ethtool_ops; struct cmis_cdb_query_status_pl qs_pl = {0}; struct ethtool_module_eeprom page_data = {}; struct ethtool_cmis_cdb_cmd_args args = {}; struct cmis_password_entry_pl pe_pl = {}; struct cmis_cdb_query_status_rpl *rpl; struct netlink_ext_ack extack = {}; int err; ethtool_cmis_page_init(&page_data, CMIS_PASSWORD_ENTRY_PAGE, CMIS_PASSWORD_ENTRY_OFFSET, sizeof(pe_pl)); page_data.data = (u8 *)&pe_pl; pe_pl = *((struct cmis_password_entry_pl *)page_data.data); pe_pl.password = params->password; err = ops->set_module_eeprom_by_page(dev, &page_data, &extack); if (err < 0) { if (extack._msg) netdev_err(dev, "%s\n", extack._msg); return err; } ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_QUERY_STATUS, (u8 *)&qs_pl, sizeof(qs_pl), 0, cdb->read_write_len_ext, 1000, sizeof(*rpl), CDB_F_COMPLETION_VALID | CDB_F_STATUS_VALID); err = ethtool_cmis_cdb_execute_cmd(dev, &args); if (err < 0) { ethnl_module_fw_flash_ntf_err(dev, ntf_params, "Query Status command failed", args.err_msg); return err; } rpl = (struct cmis_cdb_query_status_rpl *)args.req.payload; if (!rpl->length || !rpl->status) { ethnl_module_fw_flash_ntf_err(dev, ntf_params, "Password was not accepted", NULL); return -EINVAL; } return 0; } /* Some CDB commands asserts the CDB completion flag only from CMIS * revision 5. Therefore, check the relevant validity flag only when * the revision supports it. */ void ethtool_cmis_cdb_check_completion_flag(u8 cmis_rev, u8 *flags) { *flags |= cmis_rev >= 5 ? CDB_F_COMPLETION_VALID : 0; } #define CMIS_CDB_MODULE_FEATURES_RESV_DATA 34 /* See section 9.4.1 "CMD 0040h: Module Features" in CMIS standard revision 5.2. * struct cmis_cdb_module_features_rpl is structured layout of the flat * array, ethtool_cmis_cdb_rpl::payload. */ struct cmis_cdb_module_features_rpl { u8 resv1[CMIS_CDB_MODULE_FEATURES_RESV_DATA]; __be16 max_completion_time; }; static u16 cmis_cdb_module_features_completion_time(struct cmis_cdb_module_features_rpl *rpl) { return be16_to_cpu(rpl->max_completion_time); } static int cmis_cdb_module_features_get(struct ethtool_cmis_cdb *cdb, struct net_device *dev, struct ethnl_module_fw_flash_ntf_params *ntf_params) { struct ethtool_cmis_cdb_cmd_args args = {}; struct cmis_cdb_module_features_rpl *rpl; u8 flags = CDB_F_STATUS_VALID; int err; ethtool_cmis_cdb_check_completion_flag(cdb->cmis_rev, &flags); ethtool_cmis_cdb_compose_args(&args, ETHTOOL_CMIS_CDB_CMD_MODULE_FEATURES, NULL, 0, 0, cdb->read_write_len_ext, 1000, sizeof(*rpl), flags); err = ethtool_cmis_cdb_execute_cmd(dev, &args); if (err < 0) { ethnl_module_fw_flash_ntf_err(dev, ntf_params, "Module Features command failed", args.err_msg); return err; } rpl = (struct cmis_cdb_module_features_rpl *)args.req.payload; cdb->max_completion_time = cmis_cdb_module_features_completion_time(rpl); return 0; } struct ethtool_cmis_cdb * ethtool_cmis_cdb_init(struct net_device *dev, const struct ethtool_module_fw_flash_params *params, struct ethnl_module_fw_flash_ntf_params *ntf_params) { struct ethtool_cmis_cdb *cdb; int err; cdb = kzalloc(sizeof(*cdb), GFP_KERNEL); if (!cdb) return ERR_PTR(-ENOMEM); err = cmis_rev_major_get(dev, &cdb->cmis_rev); if (err < 0) goto err; if (cdb->cmis_rev < 4) { ethnl_module_fw_flash_ntf_err(dev, ntf_params, "CMIS revision doesn't support module firmware flashing", NULL); err = -EOPNOTSUPP; goto err; } err = cmis_cdb_advertisement_get(cdb, dev); if (err < 0) goto err; if (params->password_valid) { err = cmis_cdb_validate_password(cdb, dev, params, ntf_params); if (err < 0) goto err; } err = cmis_cdb_module_features_get(cdb, dev, ntf_params); if (err < 0) goto err; return cdb; err: ethtool_cmis_cdb_fini(cdb); return ERR_PTR(err); } void ethtool_cmis_cdb_fini(struct ethtool_cmis_cdb *cdb) { kfree(cdb); } static bool is_completed(u8 data) { return !!(data & 0x40); } #define CMIS_CDB_STATUS_SUCCESS 0x01 static bool status_success(u8 data) { return data == CMIS_CDB_STATUS_SUCCESS; } #define CMIS_CDB_STATUS_FAIL 0x40 static bool status_fail(u8 data) { return data & CMIS_CDB_STATUS_FAIL; } struct cmis_wait_for_cond_rpl { u8 state; }; static int ethtool_cmis_module_poll(struct net_device *dev, struct cmis_wait_for_cond_rpl *rpl, u32 offset, bool (*cond_success)(u8), bool (*cond_fail)(u8)) { const struct ethtool_ops *ops = dev->ethtool_ops; struct ethtool_module_eeprom page_data = {0}; struct netlink_ext_ack extack = {}; int err; ethtool_cmis_page_init(&page_data, 0, offset, sizeof(rpl)); page_data.data = (u8 *)rpl; err = ops->get_module_eeprom_by_page(dev, &page_data, &extack); if (err < 0) { if (extack._msg) netdev_err_once(dev, "%s\n", extack._msg); return -EBUSY; } if ((*cond_success)(rpl->state)) return 0; if (*cond_fail && (*cond_fail)(rpl->state)) return -EIO; return -EBUSY; } int ethtool_cmis_wait_for_cond(struct net_device *dev, u8 flags, u8 flag, u16 max_duration, u32 offset, bool (*cond_success)(u8), bool (*cond_fail)(u8), u8 *state) { struct cmis_wait_for_cond_rpl rpl = {}; unsigned long end; int err; if (!(flags & flag)) return 0; if (max_duration == 0) max_duration = U16_MAX; end = jiffies + msecs_to_jiffies(max_duration); do { err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, cond_fail); if (err != -EBUSY) goto out; msleep(20); } while (time_before(jiffies, end)); err = ethtool_cmis_module_poll(dev, &rpl, offset, cond_success, cond_fail); if (err == -EBUSY) err = -ETIMEDOUT; out: *state = rpl.state; return err; } #define CMIS_CDB_COMPLETION_FLAG_OFFSET 0x08 static int cmis_cdb_wait_for_completion(struct net_device *dev, struct ethtool_cmis_cdb_cmd_args *args) { u8 flag; int err; /* Some vendors demand waiting time before checking completion flag * in some CDB commands. */ msleep(args->msleep_pre_rpl); err = ethtool_cmis_wait_for_cond(dev, args->flags, CDB_F_COMPLETION_VALID, args->max_duration, CMIS_CDB_COMPLETION_FLAG_OFFSET, is_completed, NULL, &flag); if (err < 0) args->err_msg = "Completion Flag did not set on time"; return err; } #define CMIS_CDB_STATUS_OFFSET 0x25 static void cmis_cdb_status_fail_msg_get(u8 status, char **err_msg) { switch (status) { case 0b10000001: *err_msg = "CDB Status is in progress: Busy capturing command"; break; case 0b10000010: *err_msg = "CDB Status is in progress: Busy checking/validating command"; break; case 0b10000011: *err_msg = "CDB Status is in progress: Busy executing"; break; case 0b01000000: *err_msg = "CDB status failed: no specific failure"; break; case 0b01000010: *err_msg = "CDB status failed: Parameter range error or parameter not supported"; break; case 0b01000101: *err_msg = "CDB status failed: CdbChkCode error"; break; default: *err_msg = "Unknown failure reason"; } }; static int cmis_cdb_wait_for_status(struct net_device *dev, struct ethtool_cmis_cdb_cmd_args *args) { u8 status; int err; /* Some vendors demand waiting time before checking status in some * CDB commands. */ msleep(args->msleep_pre_rpl); err = ethtool_cmis_wait_for_cond(dev, args->flags, CDB_F_STATUS_VALID, args->max_duration, CMIS_CDB_STATUS_OFFSET, status_success, status_fail, &status); if (err < 0 && !args->err_msg) cmis_cdb_status_fail_msg_get(status, &args->err_msg); return err; } #define CMIS_CDB_REPLY_OFFSET 0x86 static int cmis_cdb_process_reply(struct net_device *dev, struct ethtool_module_eeprom *page_data, struct ethtool_cmis_cdb_cmd_args *args) { u8 rpl_hdr_len = sizeof(struct ethtool_cmis_cdb_rpl_hdr); u8 rpl_exp_len = args->rpl_exp_len + rpl_hdr_len; const struct ethtool_ops *ops = dev->ethtool_ops; struct netlink_ext_ack extack = {}; struct ethtool_cmis_cdb_rpl *rpl; int err; if (!args->rpl_exp_len) return 0; ethtool_cmis_page_init(page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, CMIS_CDB_REPLY_OFFSET, rpl_exp_len); page_data->data = kmalloc(page_data->length, GFP_KERNEL); if (!page_data->data) return -ENOMEM; err = ops->get_module_eeprom_by_page(dev, page_data, &extack); if (err < 0) { if (extack._msg) netdev_err(dev, "%s\n", extack._msg); goto out; } rpl = (struct ethtool_cmis_cdb_rpl *)page_data->data; if ((args->rpl_exp_len > rpl->hdr.rpl_len + rpl_hdr_len) || !rpl->hdr.rpl_chk_code) { err = -EIO; goto out; } args->req.lpl_len = rpl->hdr.rpl_len; memcpy(args->req.payload, rpl->payload, args->req.lpl_len); out: kfree(page_data->data); return err; } static int __ethtool_cmis_cdb_execute_cmd(struct net_device *dev, struct ethtool_module_eeprom *page_data, u8 page, u32 offset, u32 length, void *data) { const struct ethtool_ops *ops = dev->ethtool_ops; struct netlink_ext_ack extack = {}; int err; ethtool_cmis_page_init(page_data, page, offset, length); page_data->data = kmemdup(data, page_data->length, GFP_KERNEL); if (!page_data->data) return -ENOMEM; err = ops->set_module_eeprom_by_page(dev, page_data, &extack); if (err < 0) { if (extack._msg) netdev_err(dev, "%s\n", extack._msg); } kfree(page_data->data); return err; } static u8 cmis_cdb_calc_checksum(const void *data, size_t size) { const u8 *bytes = (const u8 *)data; u8 checksum = 0; for (size_t i = 0; i < size; i++) checksum += bytes[i]; return ~checksum; } #define CMIS_CDB_CMD_ID_OFFSET 0x80 int ethtool_cmis_cdb_execute_cmd(struct net_device *dev, struct ethtool_cmis_cdb_cmd_args *args) { struct ethtool_module_eeprom page_data = {}; u32 offset; int err; args->req.chk_code = cmis_cdb_calc_checksum(&args->req, sizeof(args->req)); if (args->req.lpl_len > args->read_write_len_ext) { args->err_msg = "LPL length is longer than CDB read write length extension allows"; return -EINVAL; } /* According to the CMIS standard, there are two options to trigger the * CDB commands. The default option is triggering the command by writing * the CMDID bytes. Therefore, the command will be split to 2 calls: * First, with everything except the CMDID field and then the CMDID * field. */ offset = CMIS_CDB_CMD_ID_OFFSET + offsetof(struct ethtool_cmis_cdb_request, body); err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, offset, sizeof(args->req.body), &args->req.body); if (err < 0) return err; offset = CMIS_CDB_CMD_ID_OFFSET + offsetof(struct ethtool_cmis_cdb_request, id); err = __ethtool_cmis_cdb_execute_cmd(dev, &page_data, ETHTOOL_CMIS_CDB_CMD_PAGE, offset, sizeof(args->req.id), &args->req.id); if (err < 0) return err; err = cmis_cdb_wait_for_completion(dev, args); if (err < 0) return err; err = cmis_cdb_wait_for_status(dev, args); if (err < 0) return err; return cmis_cdb_process_reply(dev, &page_data, args); }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1