Contributors: 9
Author Tokens Token Proportion Commits Commit Proportion
Liam Girdwood 670 51.03% 3 6.25%
Ranjani Sridharan 304 23.15% 18 37.50%
Peter Ujfalusi 106 8.07% 9 18.75%
Kai Vehmanen 62 4.72% 4 8.33%
Pierre-Louis Bossart 58 4.42% 6 12.50%
Daniel Baluta 47 3.58% 4 8.33%
Keyon Jie 38 2.89% 1 2.08%
Marcin Rajwa 17 1.29% 1 2.08%
Libin Yang 11 0.84% 2 4.17%
Total 1313 48


// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license.  When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2018 Intel Corporation
//
// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
//

#include "ops.h"
#include "sof-priv.h"
#include "sof-audio.h"

/*
 * Helper function to determine the target DSP state during
 * system suspend. This function only cares about the device
 * D-states. Platform-specific substates, if any, should be
 * handled by the platform-specific parts.
 */
static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
{
	u32 target_dsp_state;

	switch (sdev->system_suspend_target) {
	case SOF_SUSPEND_S5:
	case SOF_SUSPEND_S4:
		/* DSP should be in D3 if the system is suspending to S3+ */
	case SOF_SUSPEND_S3:
		/* DSP should be in D3 if the system is suspending to S3 */
		target_dsp_state = SOF_DSP_PM_D3;
		break;
	case SOF_SUSPEND_S0IX:
		/*
		 * Currently, the only criterion for retaining the DSP in D0
		 * is that there are streams that ignored the suspend trigger.
		 * Additional criteria such Soundwire clock-stop mode and
		 * device suspend latency considerations will be added later.
		 */
		if (snd_sof_stream_suspend_ignored(sdev))
			target_dsp_state = SOF_DSP_PM_D0;
		else
			target_dsp_state = SOF_DSP_PM_D3;
		break;
	default:
		/* This case would be during runtime suspend */
		target_dsp_state = SOF_DSP_PM_D3;
		break;
	}

	return target_dsp_state;
}

#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
static void sof_cache_debugfs(struct snd_sof_dev *sdev)
{
	struct snd_sof_dfsentry *dfse;

	list_for_each_entry(dfse, &sdev->dfsentry_list, list) {

		/* nothing to do if debugfs buffer is not IO mem */
		if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
			continue;

		/* cache memory that is only accessible in D0 */
		if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
			memcpy_fromio(dfse->cache_buf, dfse->io_mem,
				      dfse->size);
	}
}
#endif

static int sof_resume(struct device *dev, bool runtime_resume)
{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
	u32 old_state = sdev->dsp_power_state.state;
	int ret;

	/* do nothing if dsp resume callbacks are not set */
	if (!runtime_resume && !sof_ops(sdev)->resume)
		return 0;

	if (runtime_resume && !sof_ops(sdev)->runtime_resume)
		return 0;

	/* DSP was never successfully started, nothing to resume */
	if (sdev->first_boot)
		return 0;

	/*
	 * if the runtime_resume flag is set, call the runtime_resume routine
	 * or else call the system resume routine
	 */
	if (runtime_resume)
		ret = snd_sof_dsp_runtime_resume(sdev);
	else
		ret = snd_sof_dsp_resume(sdev);
	if (ret < 0) {
		dev_err(sdev->dev,
			"error: failed to power up DSP after resume\n");
		return ret;
	}

	if (sdev->dspless_mode_selected) {
		sof_set_fw_state(sdev, SOF_DSPLESS_MODE);
		return 0;
	}

	/*
	 * Nothing further to be done for platforms that support the low power
	 * D0 substate. Resume trace and return when resuming from
	 * low-power D0 substate
	 */
	if (!runtime_resume && sof_ops(sdev)->set_power_state &&
	    old_state == SOF_DSP_PM_D0) {
		ret = sof_fw_trace_resume(sdev);
		if (ret < 0)
			/* non fatal */
			dev_warn(sdev->dev,
				 "failed to enable trace after resume %d\n", ret);
		return 0;
	}

	sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE);

	/* load the firmware */
	ret = snd_sof_load_firmware(sdev);
	if (ret < 0) {
		dev_err(sdev->dev,
			"error: failed to load DSP firmware after resume %d\n",
			ret);
		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
		return ret;
	}

	sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS);

	/*
	 * Boot the firmware. The FW boot status will be modified
	 * in snd_sof_run_firmware() depending on the outcome.
	 */
	ret = snd_sof_run_firmware(sdev);
	if (ret < 0) {
		dev_err(sdev->dev,
			"error: failed to boot DSP firmware after resume %d\n",
			ret);
		sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED);
		return ret;
	}

	/* resume DMA trace */
	ret = sof_fw_trace_resume(sdev);
	if (ret < 0) {
		/* non fatal */
		dev_warn(sdev->dev,
			 "warning: failed to init trace after resume %d\n",
			 ret);
	}

	/* restore pipelines */
	if (tplg_ops && tplg_ops->set_up_all_pipelines) {
		ret = tplg_ops->set_up_all_pipelines(sdev, false);
		if (ret < 0) {
			dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret);
			goto setup_fail;
		}
	}

	/* Notify clients not managed by pm framework about core resume */
	sof_resume_clients(sdev);

	/* notify DSP of system resume */
	if (pm_ops && pm_ops->ctx_restore) {
		ret = pm_ops->ctx_restore(sdev);
		if (ret < 0)
			dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret);
	}

setup_fail:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
	if (ret < 0) {
		/*
		 * Debugfs cannot be read in runtime suspend, so cache
		 * the contents upon failure. This allows to capture
		 * possible DSP coredump information.
		 */
		sof_cache_debugfs(sdev);
	}
#endif

	return ret;
}

static int sof_suspend(struct device *dev, bool runtime_suspend)
{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);
	const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg);
	pm_message_t pm_state;
	u32 target_state = snd_sof_dsp_power_target(sdev);
	u32 old_state = sdev->dsp_power_state.state;
	int ret;

	/* do nothing if dsp suspend callback is not set */
	if (!runtime_suspend && !sof_ops(sdev)->suspend)
		return 0;

	if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
		return 0;

	/* we need to tear down pipelines only if the DSP hardware is
	 * active, which happens for PCI devices. if the device is
	 * suspended, it is brought back to full power and then
	 * suspended again
	 */
	if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0))
		tplg_ops->tear_down_all_pipelines(sdev, false);

	if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
		goto suspend;

	/* prepare for streams to be resumed properly upon resume */
	if (!runtime_suspend) {
		ret = snd_sof_dsp_hw_params_upon_resume(sdev);
		if (ret < 0) {
			dev_err(sdev->dev,
				"error: setting hw_params flag during suspend %d\n",
				ret);
			return ret;
		}
	}

	pm_state.event = target_state;

	/* suspend DMA trace */
	sof_fw_trace_suspend(sdev, pm_state);

	/* Notify clients not managed by pm framework about core suspend */
	sof_suspend_clients(sdev, pm_state);

	/* Skip to platform-specific suspend if DSP is entering D0 */
	if (target_state == SOF_DSP_PM_D0)
		goto suspend;

#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
	/* cache debugfs contents during runtime suspend */
	if (runtime_suspend)
		sof_cache_debugfs(sdev);
#endif
	/* notify DSP of upcoming power down */
	if (pm_ops && pm_ops->ctx_save) {
		ret = pm_ops->ctx_save(sdev);
		if (ret == -EBUSY || ret == -EAGAIN) {
			/*
			 * runtime PM has logic to handle -EBUSY/-EAGAIN so
			 * pass these errors up
			 */
			dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret);
			return ret;
		} else if (ret < 0) {
			/* FW in unexpected state, continue to power down */
			dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n",
				 ret);
		}
	}

suspend:

	/* return if the DSP was not probed successfully */
	if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
		return 0;

	/* platform-specific suspend */
	if (runtime_suspend)
		ret = snd_sof_dsp_runtime_suspend(sdev);
	else
		ret = snd_sof_dsp_suspend(sdev, target_state);
	if (ret < 0)
		dev_err(sdev->dev,
			"error: failed to power down DSP during suspend %d\n",
			ret);

	/* Do not reset FW state if DSP is in D0 */
	if (target_state == SOF_DSP_PM_D0)
		return ret;

	/* reset FW state */
	sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED);
	sdev->enabled_cores_mask = 0;

	return ret;
}

int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
{
	const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm);

	/* Notify DSP of upcoming power down */
	if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save)
		return pm_ops->ctx_save(sdev);

	return 0;
}

int snd_sof_runtime_suspend(struct device *dev)
{
	return sof_suspend(dev, true);
}
EXPORT_SYMBOL(snd_sof_runtime_suspend);

int snd_sof_runtime_idle(struct device *dev)
{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

	return snd_sof_dsp_runtime_idle(sdev);
}
EXPORT_SYMBOL(snd_sof_runtime_idle);

int snd_sof_runtime_resume(struct device *dev)
{
	return sof_resume(dev, true);
}
EXPORT_SYMBOL(snd_sof_runtime_resume);

int snd_sof_resume(struct device *dev)
{
	return sof_resume(dev, false);
}
EXPORT_SYMBOL(snd_sof_resume);

int snd_sof_suspend(struct device *dev)
{
	return sof_suspend(dev, false);
}
EXPORT_SYMBOL(snd_sof_suspend);

int snd_sof_prepare(struct device *dev)
{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);
	const struct sof_dev_desc *desc = sdev->pdata->desc;

	/* will suspend to S3 by default */
	sdev->system_suspend_target = SOF_SUSPEND_S3;

	/*
	 * if the firmware is crashed or boot failed then we try to aim for S3
	 * to reboot the firmware
	 */
	if (sdev->fw_state == SOF_FW_CRASHED ||
	    sdev->fw_state == SOF_FW_BOOT_FAILED)
		return 0;

	if (!desc->use_acpi_target_states)
		return 0;

#if defined(CONFIG_ACPI)
	switch (acpi_target_system_state()) {
	case ACPI_STATE_S0:
		sdev->system_suspend_target = SOF_SUSPEND_S0IX;
		break;
	case ACPI_STATE_S1:
	case ACPI_STATE_S2:
	case ACPI_STATE_S3:
		sdev->system_suspend_target = SOF_SUSPEND_S3;
		break;
	case ACPI_STATE_S4:
		sdev->system_suspend_target = SOF_SUSPEND_S4;
		break;
	case ACPI_STATE_S5:
		sdev->system_suspend_target = SOF_SUSPEND_S5;
		break;
	default:
		break;
	}
#endif

	return 0;
}
EXPORT_SYMBOL(snd_sof_prepare);

void snd_sof_complete(struct device *dev)
{
	struct snd_sof_dev *sdev = dev_get_drvdata(dev);

	sdev->system_suspend_target = SOF_SUSPEND_NONE;
}
EXPORT_SYMBOL(snd_sof_complete);