Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Liam Girdwood | 670 | 51.03% | 3 | 6.25% |
Ranjani Sridharan | 304 | 23.15% | 18 | 37.50% |
Peter Ujfalusi | 106 | 8.07% | 9 | 18.75% |
Kai Vehmanen | 62 | 4.72% | 4 | 8.33% |
Pierre-Louis Bossart | 58 | 4.42% | 6 | 12.50% |
Daniel Baluta | 47 | 3.58% | 4 | 8.33% |
Keyon Jie | 38 | 2.89% | 1 | 2.08% |
Marcin Rajwa | 17 | 1.29% | 1 | 2.08% |
Libin Yang | 11 | 0.84% | 2 | 4.17% |
Total | 1313 | 48 |
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) // // This file is provided under a dual BSD/GPLv2 license. When using or // redistributing this file, you may do so under either license. // // Copyright(c) 2018 Intel Corporation // // Author: Liam Girdwood <liam.r.girdwood@linux.intel.com> // #include "ops.h" #include "sof-priv.h" #include "sof-audio.h" /* * Helper function to determine the target DSP state during * system suspend. This function only cares about the device * D-states. Platform-specific substates, if any, should be * handled by the platform-specific parts. */ static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev) { u32 target_dsp_state; switch (sdev->system_suspend_target) { case SOF_SUSPEND_S5: case SOF_SUSPEND_S4: /* DSP should be in D3 if the system is suspending to S3+ */ case SOF_SUSPEND_S3: /* DSP should be in D3 if the system is suspending to S3 */ target_dsp_state = SOF_DSP_PM_D3; break; case SOF_SUSPEND_S0IX: /* * Currently, the only criterion for retaining the DSP in D0 * is that there are streams that ignored the suspend trigger. * Additional criteria such Soundwire clock-stop mode and * device suspend latency considerations will be added later. */ if (snd_sof_stream_suspend_ignored(sdev)) target_dsp_state = SOF_DSP_PM_D0; else target_dsp_state = SOF_DSP_PM_D3; break; default: /* This case would be during runtime suspend */ target_dsp_state = SOF_DSP_PM_D3; break; } return target_dsp_state; } #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) static void sof_cache_debugfs(struct snd_sof_dev *sdev) { struct snd_sof_dfsentry *dfse; list_for_each_entry(dfse, &sdev->dfsentry_list, list) { /* nothing to do if debugfs buffer is not IO mem */ if (dfse->type == SOF_DFSENTRY_TYPE_BUF) continue; /* cache memory that is only accessible in D0 */ if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY) memcpy_fromio(dfse->cache_buf, dfse->io_mem, dfse->size); } } #endif static int sof_resume(struct device *dev, bool runtime_resume) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); u32 old_state = sdev->dsp_power_state.state; int ret; /* do nothing if dsp resume callbacks are not set */ if (!runtime_resume && !sof_ops(sdev)->resume) return 0; if (runtime_resume && !sof_ops(sdev)->runtime_resume) return 0; /* DSP was never successfully started, nothing to resume */ if (sdev->first_boot) return 0; /* * if the runtime_resume flag is set, call the runtime_resume routine * or else call the system resume routine */ if (runtime_resume) ret = snd_sof_dsp_runtime_resume(sdev); else ret = snd_sof_dsp_resume(sdev); if (ret < 0) { dev_err(sdev->dev, "error: failed to power up DSP after resume\n"); return ret; } if (sdev->dspless_mode_selected) { sof_set_fw_state(sdev, SOF_DSPLESS_MODE); return 0; } /* * Nothing further to be done for platforms that support the low power * D0 substate. Resume trace and return when resuming from * low-power D0 substate */ if (!runtime_resume && sof_ops(sdev)->set_power_state && old_state == SOF_DSP_PM_D0) { ret = sof_fw_trace_resume(sdev); if (ret < 0) /* non fatal */ dev_warn(sdev->dev, "failed to enable trace after resume %d\n", ret); return 0; } sof_set_fw_state(sdev, SOF_FW_BOOT_PREPARE); /* load the firmware */ ret = snd_sof_load_firmware(sdev); if (ret < 0) { dev_err(sdev->dev, "error: failed to load DSP firmware after resume %d\n", ret); sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); return ret; } sof_set_fw_state(sdev, SOF_FW_BOOT_IN_PROGRESS); /* * Boot the firmware. The FW boot status will be modified * in snd_sof_run_firmware() depending on the outcome. */ ret = snd_sof_run_firmware(sdev); if (ret < 0) { dev_err(sdev->dev, "error: failed to boot DSP firmware after resume %d\n", ret); sof_set_fw_state(sdev, SOF_FW_BOOT_FAILED); return ret; } /* resume DMA trace */ ret = sof_fw_trace_resume(sdev); if (ret < 0) { /* non fatal */ dev_warn(sdev->dev, "warning: failed to init trace after resume %d\n", ret); } /* restore pipelines */ if (tplg_ops && tplg_ops->set_up_all_pipelines) { ret = tplg_ops->set_up_all_pipelines(sdev, false); if (ret < 0) { dev_err(sdev->dev, "Failed to restore pipeline after resume %d\n", ret); goto setup_fail; } } /* Notify clients not managed by pm framework about core resume */ sof_resume_clients(sdev); /* notify DSP of system resume */ if (pm_ops && pm_ops->ctx_restore) { ret = pm_ops->ctx_restore(sdev); if (ret < 0) dev_err(sdev->dev, "ctx_restore IPC error during resume: %d\n", ret); } setup_fail: #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) if (ret < 0) { /* * Debugfs cannot be read in runtime suspend, so cache * the contents upon failure. This allows to capture * possible DSP coredump information. */ sof_cache_debugfs(sdev); } #endif return ret; } static int sof_suspend(struct device *dev, bool runtime_suspend) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); const struct sof_ipc_tplg_ops *tplg_ops = sof_ipc_get_ops(sdev, tplg); pm_message_t pm_state; u32 target_state = snd_sof_dsp_power_target(sdev); u32 old_state = sdev->dsp_power_state.state; int ret; /* do nothing if dsp suspend callback is not set */ if (!runtime_suspend && !sof_ops(sdev)->suspend) return 0; if (runtime_suspend && !sof_ops(sdev)->runtime_suspend) return 0; /* we need to tear down pipelines only if the DSP hardware is * active, which happens for PCI devices. if the device is * suspended, it is brought back to full power and then * suspended again */ if (tplg_ops && tplg_ops->tear_down_all_pipelines && (old_state == SOF_DSP_PM_D0)) tplg_ops->tear_down_all_pipelines(sdev, false); if (sdev->fw_state != SOF_FW_BOOT_COMPLETE) goto suspend; /* prepare for streams to be resumed properly upon resume */ if (!runtime_suspend) { ret = snd_sof_dsp_hw_params_upon_resume(sdev); if (ret < 0) { dev_err(sdev->dev, "error: setting hw_params flag during suspend %d\n", ret); return ret; } } pm_state.event = target_state; /* suspend DMA trace */ sof_fw_trace_suspend(sdev, pm_state); /* Notify clients not managed by pm framework about core suspend */ sof_suspend_clients(sdev, pm_state); /* Skip to platform-specific suspend if DSP is entering D0 */ if (target_state == SOF_DSP_PM_D0) goto suspend; #if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE) /* cache debugfs contents during runtime suspend */ if (runtime_suspend) sof_cache_debugfs(sdev); #endif /* notify DSP of upcoming power down */ if (pm_ops && pm_ops->ctx_save) { ret = pm_ops->ctx_save(sdev); if (ret == -EBUSY || ret == -EAGAIN) { /* * runtime PM has logic to handle -EBUSY/-EAGAIN so * pass these errors up */ dev_err(sdev->dev, "ctx_save IPC error during suspend: %d\n", ret); return ret; } else if (ret < 0) { /* FW in unexpected state, continue to power down */ dev_warn(sdev->dev, "ctx_save IPC error: %d, proceeding with suspend\n", ret); } } suspend: /* return if the DSP was not probed successfully */ if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED) return 0; /* platform-specific suspend */ if (runtime_suspend) ret = snd_sof_dsp_runtime_suspend(sdev); else ret = snd_sof_dsp_suspend(sdev, target_state); if (ret < 0) dev_err(sdev->dev, "error: failed to power down DSP during suspend %d\n", ret); /* Do not reset FW state if DSP is in D0 */ if (target_state == SOF_DSP_PM_D0) return ret; /* reset FW state */ sof_set_fw_state(sdev, SOF_FW_BOOT_NOT_STARTED); sdev->enabled_cores_mask = 0; return ret; } int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev) { const struct sof_ipc_pm_ops *pm_ops = sof_ipc_get_ops(sdev, pm); /* Notify DSP of upcoming power down */ if (sof_ops(sdev)->remove && pm_ops && pm_ops->ctx_save) return pm_ops->ctx_save(sdev); return 0; } int snd_sof_runtime_suspend(struct device *dev) { return sof_suspend(dev, true); } EXPORT_SYMBOL(snd_sof_runtime_suspend); int snd_sof_runtime_idle(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); return snd_sof_dsp_runtime_idle(sdev); } EXPORT_SYMBOL(snd_sof_runtime_idle); int snd_sof_runtime_resume(struct device *dev) { return sof_resume(dev, true); } EXPORT_SYMBOL(snd_sof_runtime_resume); int snd_sof_resume(struct device *dev) { return sof_resume(dev, false); } EXPORT_SYMBOL(snd_sof_resume); int snd_sof_suspend(struct device *dev) { return sof_suspend(dev, false); } EXPORT_SYMBOL(snd_sof_suspend); int snd_sof_prepare(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); const struct sof_dev_desc *desc = sdev->pdata->desc; /* will suspend to S3 by default */ sdev->system_suspend_target = SOF_SUSPEND_S3; /* * if the firmware is crashed or boot failed then we try to aim for S3 * to reboot the firmware */ if (sdev->fw_state == SOF_FW_CRASHED || sdev->fw_state == SOF_FW_BOOT_FAILED) return 0; if (!desc->use_acpi_target_states) return 0; #if defined(CONFIG_ACPI) switch (acpi_target_system_state()) { case ACPI_STATE_S0: sdev->system_suspend_target = SOF_SUSPEND_S0IX; break; case ACPI_STATE_S1: case ACPI_STATE_S2: case ACPI_STATE_S3: sdev->system_suspend_target = SOF_SUSPEND_S3; break; case ACPI_STATE_S4: sdev->system_suspend_target = SOF_SUSPEND_S4; break; case ACPI_STATE_S5: sdev->system_suspend_target = SOF_SUSPEND_S5; break; default: break; } #endif return 0; } EXPORT_SYMBOL(snd_sof_prepare); void snd_sof_complete(struct device *dev) { struct snd_sof_dev *sdev = dev_get_drvdata(dev); sdev->system_suspend_target = SOF_SUSPEND_NONE; } EXPORT_SYMBOL(snd_sof_complete);
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1