Contributors: 5
Author Tokens Token Proportion Commits Commit Proportion
David Howells 516 97.73% 13 72.22%
Dmitry V. Levin 5 0.95% 1 5.56%
Linus Torvalds (pre-git) 5 0.95% 2 11.11%
Masahiro Yamada 1 0.19% 1 5.56%
Thomas Gleixner 1 0.19% 1 5.56%
Total 528 18 


/* SPDX-License-Identifier: GPL-2.0-or-later WITH Linux-syscall-note */
/* Types and definitions for AF_RXRPC.
 *
 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 */

#ifndef _UAPI_LINUX_RXRPC_H
#define _UAPI_LINUX_RXRPC_H

#include <linux/types.h>
#include <linux/in.h>
#include <linux/in6.h>

/*
 * RxRPC socket address
 */
struct sockaddr_rxrpc {
	__kernel_sa_family_t	srx_family;	/* address family */
	__u16			srx_service;	/* service desired */
	__u16			transport_type;	/* type of transport socket (SOCK_DGRAM) */
	__u16			transport_len;	/* length of transport address */
	union {
		__kernel_sa_family_t family;	/* transport address family */
		struct sockaddr_in sin;		/* IPv4 transport address */
		struct sockaddr_in6 sin6;	/* IPv6 transport address */
	} transport;
};

/*
 * RxRPC socket options
 */
#define RXRPC_SECURITY_KEY		1	/* [clnt] set client security key */
#define RXRPC_SECURITY_KEYRING		2	/* [srvr] set ring of server security keys */
#define RXRPC_EXCLUSIVE_CONNECTION	3	/* Deprecated; use RXRPC_EXCLUSIVE_CALL instead */
#define RXRPC_MIN_SECURITY_LEVEL	4	/* minimum security level */
#define RXRPC_UPGRADEABLE_SERVICE	5	/* Upgrade service[0] -> service[1] */
#define RXRPC_SUPPORTED_CMSG		6	/* Get highest supported control message type */
#define RXRPC_MANAGE_RESPONSE		7	/* [clnt] Want to manage RESPONSE packets */

/*
 * RxRPC control messages
 * - If neither abort or accept are specified, the message is a data message.
 * - terminal messages mean that a user call ID tag can be recycled
 * - C/S/- indicate whether these are applicable to client, server or both
 * - s/r/- indicate whether these are applicable to sendmsg() and/or recvmsg()
 */
enum rxrpc_cmsg_type {
	RXRPC_USER_CALL_ID	= 1,	/* -sr: User call ID specifier */
	RXRPC_ABORT		= 2,	/* -sr: Abort request / notification [terminal] */
	RXRPC_ACK		= 3,	/* S-r: RPC op final ACK received [terminal] */
	RXRPC_NET_ERROR		= 5,	/* --r: Network error received [terminal] */
	RXRPC_BUSY		= 6,	/* C-r: Server busy received [terminal] */
	RXRPC_LOCAL_ERROR	= 7,	/* --r: Local error generated [terminal] */
	RXRPC_NEW_CALL		= 8,	/* S-r: New incoming call notification */
	RXRPC_EXCLUSIVE_CALL	= 10,	/* Cs-: Call should be on exclusive connection */
	RXRPC_UPGRADE_SERVICE	= 11,	/* Cs-: Request service upgrade for client call */
	RXRPC_TX_LENGTH		= 12,	/* -s-: Total length of Tx data */
	RXRPC_SET_CALL_TIMEOUT	= 13,	/* -s-: Set one or more call timeouts */
	RXRPC_CHARGE_ACCEPT	= 14,	/* Ss-: Charge the accept pool with a user call ID */
	RXRPC_OOB_ID		= 15,	/* -sr: OOB message ID */
	RXRPC_CHALLENGED	= 16,	/* C-r: Info on a received CHALLENGE */
	RXRPC_RESPOND		= 17,	/* Cs-: Respond to a challenge */
	RXRPC_RESPONDED		= 18,	/* S-r: Data received in RESPONSE */
	RXRPC_RESP_RXGK_APPDATA	= 19,	/* Cs-: RESPONSE: RxGK app data to include */
	RXRPC__SUPPORTED
};

/*
 * RxRPC security levels
 */
#define RXRPC_SECURITY_PLAIN	0	/* plain secure-checksummed packets only */
#define RXRPC_SECURITY_AUTH	1	/* authenticated packets */
#define RXRPC_SECURITY_ENCRYPT	2	/* encrypted packets */

/*
 * RxRPC security indices
 */
#define RXRPC_SECURITY_NONE	0	/* no security protocol */
#define RXRPC_SECURITY_RXKAD	2	/* kaserver or kerberos 4 */
#define RXRPC_SECURITY_RXGK	4	/* gssapi-based */
#define RXRPC_SECURITY_RXK5	5	/* kerberos 5 */
#define RXRPC_SECURITY_YFS_RXGK	6	/* YFS gssapi-based */

/*
 * RxRPC-level abort codes
 */
#define RX_CALL_DEAD		-1	/* call/conn has been inactive and is shut down */
#define RX_INVALID_OPERATION	-2	/* invalid operation requested / attempted */
#define RX_CALL_TIMEOUT		-3	/* call timeout exceeded */
#define RX_EOF			-4	/* unexpected end of data on read op */
#define RX_PROTOCOL_ERROR	-5	/* low-level protocol error */
#define RX_USER_ABORT		-6	/* generic user abort */
#define RX_ADDRINUSE		-7	/* UDP port in use */
#define RX_DEBUGI_BADTYPE	-8	/* bad debugging packet type */

/*
 * (un)marshalling abort codes (rxgen)
 */
#define RXGEN_CC_MARSHAL	-450
#define RXGEN_CC_UNMARSHAL	-451
#define RXGEN_SS_MARSHAL	-452
#define RXGEN_SS_UNMARSHAL	-453
#define RXGEN_DECODE		-454
#define RXGEN_OPCODE		-455
#define RXGEN_SS_XDRFREE	-456
#define RXGEN_CC_XDRFREE	-457

/*
 * Rx kerberos security abort codes
 * - unfortunately we have no generalised security abort codes to say things
 *   like "unsupported security", so we have to use these instead and hope the
 *   other side understands
 */
#define RXKADINCONSISTENCY	19270400	/* security module structure inconsistent */
#define RXKADPACKETSHORT	19270401	/* packet too short for security challenge */
#define RXKADLEVELFAIL		19270402	/* security level negotiation failed */
#define RXKADTICKETLEN		19270403	/* ticket length too short or too long */
#define RXKADOUTOFSEQUENCE	19270404	/* packet had bad sequence number */
#define RXKADNOAUTH		19270405	/* caller not authorised */
#define RXKADBADKEY		19270406	/* illegal key: bad parity or weak */
#define RXKADBADTICKET		19270407	/* security object was passed a bad ticket */
#define RXKADUNKNOWNKEY		19270408	/* ticket contained unknown key version number */
#define RXKADEXPIRED		19270409	/* authentication expired */
#define RXKADSEALEDINCON	19270410	/* sealed data inconsistent */
#define RXKADDATALEN		19270411	/* user data too long */
#define RXKADILLEGALLEVEL	19270412	/* caller not authorised to use encrypted conns */

/*
 * RxGK GSSAPI security abort codes.
 */
#if 0 /* Original standard abort codes (used by OpenAFS) */
#define RXGK_INCONSISTENCY	1233242880	/* Security module structure inconsistent */
#define RXGK_PACKETSHORT	1233242881	/* Packet too short for security challenge */
#define RXGK_BADCHALLENGE	1233242882	/* Invalid security challenge */
#define RXGK_BADETYPE		1233242883	/* Invalid or impermissible encryption type */
#define RXGK_BADLEVEL		1233242884	/* Invalid or impermissible security level */
#define RXGK_BADKEYNO		1233242885	/* Key version number not found */
#define RXGK_EXPIRED		1233242886	/* Token has expired */
#define RXGK_NOTAUTH		1233242887	/* Caller not authorized */
#define RXGK_BAD_TOKEN		1233242888	/* Security object was passed a bad token */
#define RXGK_SEALED_INCON	1233242889	/* Sealed data inconsistent */
#define RXGK_DATA_LEN		1233242890	/* User data too long */
#define RXGK_BAD_QOP		1233242891	/* Inadequate quality of protection available */
#else /* Revised standard abort codes (used by YFS) */
#define RXGK_INCONSISTENCY	1233242880	/* Security module structure inconsistent */
#define RXGK_PACKETSHORT	1233242881	/* Packet too short for security challenge */
#define RXGK_BADCHALLENGE	1233242882	/* Security challenge/response failed */
#define RXGK_SEALEDINCON	1233242883	/* Sealed data is inconsistent */
#define RXGK_NOTAUTH		1233242884	/* Caller not authorised */
#define RXGK_EXPIRED		1233242885	/* Authentication expired */
#define RXGK_BADLEVEL		1233242886	/* Unsupported or not permitted security level */
#define RXGK_BADKEYNO		1233242887	/* Bad transport key number */
#define RXGK_NOTRXGK		1233242888	/* Security layer is not rxgk */
#define RXGK_UNSUPPORTED	1233242889	/* Endpoint does not support rxgk */
#define RXGK_GSSERROR		1233242890	/* GSSAPI mechanism error */
#endif

/*
 * Challenge information in the RXRPC_CHALLENGED control message.
 */
struct rxrpc_challenge {
	__u16		service_id;	/* The service ID of the connection (may be upgraded) */
	__u8		security_index;	/* The security index of the connection */
	__u8		pad;		/* Round out to a multiple of 4 bytes. */
	/* ... The security class gets to append extra information ... */
};

struct rxgk_challenge {
	struct rxrpc_challenge	base;
	__u32			enctype;	/* Krb5 encoding type */
};

#endif /* _UAPI_LINUX_RXRPC_H */