Contributors: 10
Author Tokens Token Proportion Commits Commit Proportion
Kirill A. Shutemov 473 78.96% 16 50.00%
Ard Biesheuvel 79 13.19% 8 25.00%
Arvind Sankar 22 3.67% 1 3.12%
Yinghai Lu 8 1.34% 1 3.12%
Joe Perches 4 0.67% 1 3.12%
Joerg Roedel 4 0.67% 1 3.12%
Kees Cook 3 0.50% 1 3.12%
Jeremy Fitzhardinge 3 0.50% 1 3.12%
Borislav Petkov 2 0.33% 1 3.12%
Greg Kroah-Hartman 1 0.17% 1 3.12%
Total 599 32 


// SPDX-License-Identifier: GPL-2.0
#include "misc.h"
#include <asm/bootparam.h>
#include <asm/bootparam_utils.h>
#include <asm/e820/types.h>
#include <asm/processor.h>
#include "../string.h"
#include "efi.h"

#define BIOS_START_MIN		0x20000U	/* 128K, less than this is insane */
#define BIOS_START_MAX		0x9f000U	/* 640K, absolute maximum */

/* __pgtable_l5_enabled needs to be in .data to avoid being cleared along with .bss */
unsigned int __section(".data") __pgtable_l5_enabled;
unsigned int __section(".data") pgdir_shift = 39;
unsigned int __section(".data") ptrs_per_p4d = 1;

/* Buffer to preserve trampoline memory */
static char trampoline_save[TRAMPOLINE_32BIT_SIZE];

/*
 * Trampoline address will be printed by extract_kernel() for debugging
 * purposes.
 *
 * Avoid putting the pointer into .bss as it will be cleared between
 * configure_5level_paging() and extract_kernel().
 */
unsigned long *trampoline_32bit __section(".data");

int cmdline_find_option_bool(const char *option);

static unsigned long find_trampoline_placement(void)
{
	unsigned long bios_start = 0, ebda_start = 0;
	struct boot_e820_entry *entry;
	char *signature;
	int i;

	/*
	 * Find a suitable spot for the trampoline.
	 * This code is based on reserve_bios_regions().
	 */

	/*
	 * EFI systems may not provide legacy ROM. The memory may not be mapped
	 * at all.
	 *
	 * Only look for values in the legacy ROM for non-EFI system.
	 */
	signature = (char *)&boot_params_ptr->efi_info.efi_loader_signature;
	if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) &&
	    strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) {
		ebda_start = *(unsigned short *)0x40e << 4;
		bios_start = *(unsigned short *)0x413 << 10;
	}

	if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX)
		bios_start = BIOS_START_MAX;

	if (ebda_start > BIOS_START_MIN && ebda_start < bios_start)
		bios_start = ebda_start;

	bios_start = round_down(bios_start, PAGE_SIZE);

	/* Find the first usable memory region under bios_start. */
	for (i = boot_params_ptr->e820_entries - 1; i >= 0; i--) {
		unsigned long new = bios_start;

		entry = &boot_params_ptr->e820_table[i];

		/* Skip all entries above bios_start. */
		if (bios_start <= entry->addr)
			continue;

		/* Skip non-RAM entries. */
		if (entry->type != E820_TYPE_RAM)
			continue;

		/* Adjust bios_start to the end of the entry if needed. */
		if (bios_start > entry->addr + entry->size)
			new = entry->addr + entry->size;

		/* Keep bios_start page-aligned. */
		new = round_down(new, PAGE_SIZE);

		/* Skip the entry if it's too small. */
		if (new - TRAMPOLINE_32BIT_SIZE < entry->addr)
			continue;

		/* Protect against underflow. */
		if (new - TRAMPOLINE_32BIT_SIZE > bios_start)
			break;

		bios_start = new;
		break;
	}

	/* Place the trampoline just below the end of low memory */
	return bios_start - TRAMPOLINE_32BIT_SIZE;
}

asmlinkage void configure_5level_paging(struct boot_params *bp, void *pgtable)
{
	void (*toggle_la57)(void *cr3);
	bool l5_required = false;

	/* Initialize boot_params. Required for cmdline_find_option_bool(). */
	sanitize_boot_params(bp);
	boot_params_ptr = bp;

	/*
	 * Check if LA57 is desired and supported.
	 *
	 * There are several parts to the check:
	 *   - if user asked to disable 5-level paging: no5lvl in cmdline
	 *   - if the machine supports 5-level paging:
	 *     + CPUID leaf 7 is supported
	 *     + the leaf has the feature bit set
	 */
	if (!cmdline_find_option_bool("no5lvl") &&
	    native_cpuid_eax(0) >= 7 && (native_cpuid_ecx(7) & BIT(16))) {
		l5_required = true;

		/* Initialize variables for 5-level paging */
		__pgtable_l5_enabled = 1;
		pgdir_shift = 48;
		ptrs_per_p4d = 512;
	}

	/*
	 * The trampoline will not be used if the paging mode is already set to
	 * the desired one.
	 */
	if (l5_required == !!(native_read_cr4() & X86_CR4_LA57))
		return;

	trampoline_32bit = (unsigned long *)find_trampoline_placement();

	/* Preserve trampoline memory */
	memcpy(trampoline_save, trampoline_32bit, TRAMPOLINE_32BIT_SIZE);

	/* Clear trampoline memory first */
	memset(trampoline_32bit, 0, TRAMPOLINE_32BIT_SIZE);

	/* Copy trampoline code in place */
	toggle_la57 = memcpy(trampoline_32bit +
			TRAMPOLINE_32BIT_CODE_OFFSET / sizeof(unsigned long),
			&trampoline_32bit_src, TRAMPOLINE_32BIT_CODE_SIZE);

	/*
	 * Avoid the need for a stack in the 32-bit trampoline code, by using
	 * LJMP rather than LRET to return back to long mode. LJMP takes an
	 * immediate absolute address, which needs to be adjusted based on the
	 * placement of the trampoline.
	 */
	*(u32 *)((u8 *)toggle_la57 + trampoline_ljmp_imm_offset) +=
						(unsigned long)toggle_la57;

	/*
	 * The code below prepares page table in trampoline memory.
	 *
	 * The new page table will be used by trampoline code for switching
	 * from 4- to 5-level paging or vice versa.
	 */

	if (l5_required) {
		/*
		 * For 4- to 5-level paging transition, set up current CR3 as
		 * the first and the only entry in a new top-level page table.
		 */
		*trampoline_32bit = __native_read_cr3() | _PAGE_TABLE_NOENC;
	} else {
		unsigned long src;

		/*
		 * For 5- to 4-level paging transition, copy page table pointed
		 * by first entry in the current top-level page table as our
		 * new top-level page table.
		 *
		 * We cannot just point to the page table from trampoline as it
		 * may be above 4G.
		 */
		src = *(unsigned long *)__native_read_cr3() & PAGE_MASK;
		memcpy(trampoline_32bit, (void *)src, PAGE_SIZE);
	}

	toggle_la57(trampoline_32bit);

	/*
	 * Move the top level page table out of trampoline memory.
	 */
	memcpy(pgtable, trampoline_32bit, PAGE_SIZE);
	native_write_cr3((unsigned long)pgtable);

	/* Restore trampoline memory */
	memcpy(trampoline_32bit, trampoline_save, TRAMPOLINE_32BIT_SIZE);
}