| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Nishanth Menon | 307 | 54.14% | 4 | 36.36% |
| Unknown | 152 | 26.81% | 3 | 27.27% |
| Siddharth Vadapalli | 68 | 11.99% | 1 | 9.09% |
| Alexander Sverdlin | 28 | 4.94% | 1 | 9.09% |
| Vaishnav Achath | 6 | 1.06% | 1 | 9.09% |
| Bryan Brattlof | 6 | 1.06% | 1 | 9.09% |
| Total | 567 | 11 |
/* SPDX-License-Identifier: GPL-2.0-only OR MIT */ /* * This header provides constants for pinctrl bindings for TI's K3 SoC * family. * * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/ */ #ifndef DTS_ARM64_TI_K3_PINCTRL_H #define DTS_ARM64_TI_K3_PINCTRL_H #define WKUP_LVL_EN_SHIFT (7) #define WKUP_LVL_POL_SHIFT (8) #define ST_EN_SHIFT (14) #define PULLUDEN_SHIFT (16) #define PULLTYPESEL_SHIFT (17) #define RXACTIVE_SHIFT (18) #define DRV_STR_SHIFT (19) #define ISO_OVERRIDE_EN_SHIFT (22) #define ISO_BYPASS_EN_SHIFT (23) #define DEBOUNCE_SHIFT (11) #define FORCE_DS_EN_SHIFT (15) #define DS_EN_SHIFT (24) #define DS_OUT_DIS_SHIFT (25) #define DS_OUT_VAL_SHIFT (26) #define DS_PULLUD_EN_SHIFT (27) #define DS_PULLTYPE_SEL_SHIFT (28) #define WKUP_EN_SHIFT (29) /* Schmitt trigger configuration */ #define ST_DISABLE (0 << ST_EN_SHIFT) #define ST_ENABLE (1 << ST_EN_SHIFT) #define PULL_DISABLE (1 << PULLUDEN_SHIFT) #define PULL_ENABLE (0 << PULLUDEN_SHIFT) #define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE) #define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE) #define INPUT_EN (1 << RXACTIVE_SHIFT) #define INPUT_DISABLE (0 << RXACTIVE_SHIFT) #define DS_PULL_DISABLE (1 << DS_PULLUD_EN_SHIFT) #define DS_PULL_ENABLE (0 << DS_PULLUD_EN_SHIFT) #define DS_PULL_UP (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE) #define DS_PULL_DOWN (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE) #define DS_STATE_EN (1 << DS_EN_SHIFT) #define DS_STATE_DISABLE (0 << DS_EN_SHIFT) #define DS_INPUT_EN (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN) #define DS_INPUT_DISABLE (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN) #define DS_OUT_VALUE_ZERO (0 << DS_OUT_VAL_SHIFT) #define DS_OUT_VALUE_ONE (1 << DS_OUT_VAL_SHIFT) /* Configuration to enable wake-up on pin activity */ #define WKUP_ENABLE (1 << WKUP_EN_SHIFT) #define WKUP_DISABLE (0 << WKUP_EN_SHIFT) #define WKUP_ON_LEVEL (1 << WKUP_LVL_EN_SHIFT) #define WKUP_ON_EDGE (0 << WKUP_LVL_EN_SHIFT) #define WKUP_LEVEL_LOW (0 << WKUP_LVL_POL_SHIFT) #define WKUP_LEVEL_HIGH (1 << WKUP_LVL_POL_SHIFT) /* Only these macros are expected be used directly in device tree files */ #define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE) #define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP) #define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN) #define PIN_INPUT (INPUT_EN | ST_ENABLE | PULL_DISABLE) #define PIN_INPUT_PULLUP (INPUT_EN | ST_ENABLE | PULL_UP) #define PIN_INPUT_PULLDOWN (INPUT_EN | ST_ENABLE | PULL_DOWN) /* Input configurations with Schmitt Trigger disabled */ #define PIN_INPUT_NOST (INPUT_EN | PULL_DISABLE) #define PIN_INPUT_PULLUP_NOST (INPUT_EN | PULL_UP) #define PIN_INPUT_PULLDOWN_NOST (INPUT_EN | PULL_DOWN) #define PIN_DEBOUNCE_DISABLE (0 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF1 (1 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF2 (2 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF3 (3 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF4 (4 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF5 (5 << DEBOUNCE_SHIFT) #define PIN_DEBOUNCE_CONF6 (6 << DEBOUNCE_SHIFT) #define PIN_DRIVE_STRENGTH_NOMINAL (0 << DRV_STR_SHIFT) #define PIN_DRIVE_STRENGTH_SLOW (1 << DRV_STR_SHIFT) #define PIN_DRIVE_STRENGTH_FAST (2 << DRV_STR_SHIFT) #define PIN_DS_FORCE_DISABLE (0 << FORCE_DS_EN_SHIFT) #define PIN_DS_FORCE_ENABLE (1 << FORCE_DS_EN_SHIFT) #define PIN_DS_ISO_OVERRIDE_DISABLE (0 << ISO_OVERRIDE_EN_SHIFT) #define PIN_DS_ISO_OVERRIDE_ENABLE (1 << ISO_OVERRIDE_EN_SHIFT) #define PIN_DS_OUT_ENABLE (0 << DS_OUT_DIS_SHIFT) #define PIN_DS_OUT_DISABLE (1 << DS_OUT_DIS_SHIFT) #define PIN_DS_OUT_VALUE_ZERO (0 << DS_OUT_VAL_SHIFT) #define PIN_DS_OUT_VALUE_ONE (1 << DS_OUT_VAL_SHIFT) #define PIN_DS_PULLUD_ENABLE (0 << DS_PULLUD_EN_SHIFT) #define PIN_DS_PULLUD_DISABLE (1 << DS_PULLUD_EN_SHIFT) #define PIN_DS_PULL_DOWN (0 << DS_PULLTYPE_SEL_SHIFT) #define PIN_DS_PULL_UP (1 << DS_PULLTYPE_SEL_SHIFT) #define PIN_DS_ISO_BYPASS (1 << ISO_BYPASS_EN_SHIFT) #define PIN_DS_ISO_BYPASS_DISABLE (0 << ISO_BYPASS_EN_SHIFT) #define PIN_DS_OUTPUT_LOW (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO) #define PIN_DS_OUTPUT_HIGH (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE) #define PIN_DS_INPUT (DS_INPUT_EN | DS_PULL_DISABLE) #define PIN_DS_INPUT_PULLUP (DS_INPUT_EN | DS_PULL_UP) #define PIN_DS_INPUT_PULLDOWN (DS_INPUT_EN | DS_PULL_DOWN) #define PIN_WKUP_EN_LEVEL_LOW (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW) #define PIN_WKUP_EN_LEVEL_HIGH (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH) #define PIN_WKUP_EN (WKUP_ENABLE | WKUP_ON_EDGE) /* Default mux configuration for gpio-ranges to use with pinctrl */ #define PIN_GPIO_RANGE_IOPAD (PIN_INPUT | 7) #define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62DX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62DX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62PX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62PX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J722S_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J722S_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J784S4_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #define J784S4_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode)) #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1