Contributors: 17
Author Tokens Token Proportion Commits Commit Proportion
Roger Pau Monné 343 49.35% 6 17.14%
Jiqian Chen 106 15.25% 1 2.86%
Jan Beulich 75 10.79% 4 11.43%
Vitaly Kuznetsov 49 7.05% 2 5.71%
Maran Wilson 34 4.89% 3 8.57%
Jeremy Fitzhardinge 31 4.46% 4 11.43%
Boris Ostrovsky 20 2.88% 3 8.57%
Konrad Rzeszutek Wilk 15 2.16% 3 8.57%
Thomas Gleixner 8 1.15% 1 2.86%
Sheng Yang 3 0.43% 1 2.86%
Ingo Molnar 3 0.43% 1 2.86%
Dou Liyang 2 0.29% 1 2.86%
Alok N Kataria 2 0.29% 1 2.86%
Greg Kroah-Hartman 1 0.14% 1 2.86%
Juergen Gross 1 0.14% 1 2.86%
H. Peter Anvin 1 0.14% 1 2.86%
Stefano Stabellini 1 0.14% 1 2.86%
Total 695 35 


// SPDX-License-Identifier: GPL-2.0
#include <linux/acpi.h>
#include <linux/cpufreq.h>
#include <linux/cpuidle.h>
#include <linux/export.h>
#include <linux/mm.h>

#include <xen/hvc-console.h>
#include <xen/acpi.h>

#include <asm/bootparam.h>
#include <asm/io_apic.h>
#include <asm/hypervisor.h>
#include <asm/e820/api.h>
#include <asm/setup.h>

#include <xen/xen.h>
#include <asm/xen/interface.h>
#include <asm/xen/hypercall.h>

#include <xen/interface/memory.h>

#include "xen-ops.h"

/*
 * PVH variables.
 *
 * The variable xen_pvh needs to live in a data segment since it is used
 * after startup_{32|64} is invoked, which will clear the .bss segment.
 */
bool __ro_after_init xen_pvh;
EXPORT_SYMBOL_GPL(xen_pvh);

#ifdef CONFIG_XEN_DOM0
int xen_pvh_setup_gsi(int gsi, int trigger, int polarity)
{
	int ret;
	struct physdev_setup_gsi setup_gsi;

	setup_gsi.gsi = gsi;
	setup_gsi.triggering = (trigger == ACPI_EDGE_SENSITIVE ? 0 : 1);
	setup_gsi.polarity = (polarity == ACPI_ACTIVE_HIGH ? 0 : 1);

	ret = HYPERVISOR_physdev_op(PHYSDEVOP_setup_gsi, &setup_gsi);
	if (ret == -EEXIST) {
		xen_raw_printk("Already setup the GSI :%d\n", gsi);
		ret = 0;
	} else if (ret)
		xen_raw_printk("Fail to setup GSI (%d)!\n", gsi);

	return ret;
}
EXPORT_SYMBOL_GPL(xen_pvh_setup_gsi);
#endif

/*
 * Reserve e820 UNUSABLE regions to inflate the memory balloon.
 *
 * On PVH dom0 the host memory map is used, RAM regions available to dom0 are
 * located as the same place as in the native memory map, but since dom0 gets
 * less memory than the total amount of host RAM the ranges that can't be
 * populated are converted from RAM -> UNUSABLE.  Use such regions (up to the
 * ratio signaled in EXTRA_MEM_RATIO) in order to inflate the balloon driver at
 * boot.  Doing so prevents the guest (even if just temporary) from using holes
 * in the memory map in order to map grants or foreign addresses, and
 * hopefully limits the risk of a clash with a device MMIO region.  Ideally the
 * hypervisor should notify us which memory ranges are suitable for creating
 * foreign mappings, but that's not yet implemented.
 */
static void __init pvh_reserve_extra_memory(void)
{
	struct boot_params *bootp = &boot_params;
	unsigned int i, ram_pages = 0, extra_pages;

	for (i = 0; i < bootp->e820_entries; i++) {
		struct boot_e820_entry *e = &bootp->e820_table[i];

		if (e->type != E820_TYPE_RAM)
			continue;
		ram_pages += PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr);
	}

	/* Max amount of extra memory. */
	extra_pages = EXTRA_MEM_RATIO * ram_pages;

	/*
	 * Convert UNUSABLE ranges to RAM and reserve them for foreign mapping
	 * purposes.
	 */
	for (i = 0; i < bootp->e820_entries && extra_pages; i++) {
		struct boot_e820_entry *e = &bootp->e820_table[i];
		unsigned long pages;

		if (e->type != E820_TYPE_UNUSABLE)
			continue;

		pages = min(extra_pages,
			PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr));

		if (pages != (PFN_DOWN(e->addr + e->size) - PFN_UP(e->addr))) {
			struct boot_e820_entry *next;

			if (bootp->e820_entries ==
			    ARRAY_SIZE(bootp->e820_table))
				/* No space left to split - skip region. */
				continue;

			/* Split entry. */
			next = e + 1;
			memmove(next, e,
				(bootp->e820_entries - i) * sizeof(*e));
			bootp->e820_entries++;
			next->addr = PAGE_ALIGN(e->addr) + PFN_PHYS(pages);
			e->size = next->addr - e->addr;
			next->size -= e->size;
		}
		e->type = E820_TYPE_RAM;
		extra_pages -= pages;

		xen_add_extra_mem(PFN_UP(e->addr), pages);
	}
}

static void __init pvh_arch_setup(void)
{
	pvh_reserve_extra_memory();

	if (xen_initial_domain()) {
		xen_add_preferred_consoles();

		/*
		 * Disable usage of CPU idle and frequency drivers: when
		 * running as hardware domain the exposed native ACPI tables
		 * causes idle and/or frequency drivers to attach and
		 * malfunction.  It's Xen the entity that controls the idle and
		 * frequency states.
		 *
		 * For unprivileged domains the exposed ACPI tables are
		 * fabricated and don't contain such data.
		 */
		disable_cpuidle();
		disable_cpufreq();
		WARN_ON(xen_set_default_idle());
	}
}

void __init xen_pvh_init(struct boot_params *boot_params)
{
	xen_pvh = 1;
	xen_domain_type = XEN_HVM_DOMAIN;
	xen_start_flags = pvh_start_info.flags;

	x86_init.oem.arch_setup = pvh_arch_setup;
	x86_init.oem.banner = xen_banner;

	xen_efi_init(boot_params);

	if (xen_initial_domain()) {
		struct xen_platform_op op = {
			.cmd = XENPF_get_dom0_console,
		};
		int ret = HYPERVISOR_platform_op(&op);

		if (ret > 0)
			xen_init_vga(&op.u.dom0_console,
				     min(ret * sizeof(char),
					 sizeof(op.u.dom0_console)),
				     &boot_params->screen_info);
	}
}

void __init mem_map_via_hcall(struct boot_params *boot_params_p)
{
	struct xen_memory_map memmap;
	int rc;

	memmap.nr_entries = ARRAY_SIZE(boot_params_p->e820_table);
	set_xen_guest_handle(memmap.buffer, boot_params_p->e820_table);
	rc = HYPERVISOR_memory_op(XENMEM_memory_map, &memmap);
	if (rc) {
		xen_raw_printk("XENMEM_memory_map failed (%d)\n", rc);
		BUG();
	}
	boot_params_p->e820_entries = memmap.nr_entries;
}