Contributors: 15
Author Tokens Token Proportion Commits Commit Proportion
Jonathan Cameron 286 51.72% 20 43.48%
Lars-Peter Clausen 99 17.90% 9 19.57%
Paul Cercueil 90 16.27% 1 2.17%
Mihail Chindris 23 4.16% 1 2.17%
Alexandru Ardelean 16 2.89% 4 8.70%
Manuel Stahl 10 1.81% 2 4.35%
Nuno Sá 8 1.45% 1 2.17%
Michael Hennerich 6 1.08% 1 2.17%
Josselin Costanzi 5 0.90% 1 2.17%
Barry Song 3 0.54% 1 2.17%
Martin Kelly 3 0.54% 1 2.17%
Matti Vaittinen 1 0.18% 1 2.17%
Linus Torvalds 1 0.18% 1 2.17%
Peter Meerwald-Stadler 1 0.18% 1 2.17%
Greg Kroah-Hartman 1 0.18% 1 2.17%
Total 553 46 


/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _IIO_BUFFER_GENERIC_IMPL_H_
#define _IIO_BUFFER_GENERIC_IMPL_H_
#include <linux/sysfs.h>
#include <linux/kref.h>

#ifdef CONFIG_IIO_BUFFER

#include <uapi/linux/iio/buffer.h>
#include <linux/iio/buffer.h>

struct dma_buf_attachment;
struct dma_fence;
struct iio_dev;
struct iio_dma_buffer_block;
struct iio_buffer;
struct sg_table;

/**
 * INDIO_BUFFER_FLAG_FIXED_WATERMARK - Watermark level of the buffer can not be
 *   configured. It has a fixed value which will be buffer specific.
 */
#define INDIO_BUFFER_FLAG_FIXED_WATERMARK BIT(0)

/**
 * struct iio_buffer_access_funcs - access functions for buffers.
 * @store_to:		actually store stuff to the buffer - must be safe to
 *			call from any context (e.g. must not sleep).
 * @read:		try to get a specified number of bytes (must exist)
 * @data_available:	indicates how much data is available for reading from
 *			the buffer.
 * @remove_from:	remove scan from buffer. Drivers should calls this to
 *			remove a scan from a buffer.
 * @write:		try to write a number of bytes
 * @space_available:	returns the amount of bytes available in a buffer
 * @request_update:	if a parameter change has been marked, update underlying
 *			storage.
 * @set_bytes_per_datum:set number of bytes per datum
 * @set_length:		set number of datums in buffer
 * @enable:             called if the buffer is attached to a device and the
 *                      device starts sampling. Calls are balanced with
 *                      @disable.
 * @disable:            called if the buffer is attached to a device and the
 *                      device stops sampling. Calles are balanced with @enable.
 * @release:		called when the last reference to the buffer is dropped,
 *			should free all resources allocated by the buffer.
 * @attach_dmabuf:	called from userspace via ioctl to attach one external
 *			DMABUF.
 * @detach_dmabuf:	called from userspace via ioctl to detach one previously
 *			attached DMABUF.
 * @enqueue_dmabuf:	called from userspace via ioctl to queue this DMABUF
 *			object to this buffer. Requires a valid DMABUF fd, that
 *			was previouly attached to this buffer.
 * @get_dma_dev:	called to get the DMA channel associated with this buffer.
 * @lock_queue:		called when the core needs to lock the buffer queue;
 *                      it is used when enqueueing DMABUF objects.
 * @unlock_queue:       used to unlock a previously locked buffer queue
 * @modes:		Supported operating modes by this buffer type
 * @flags:		A bitmask combination of INDIO_BUFFER_FLAG_*
 *
 * The purpose of this structure is to make the buffer element
 * modular as event for a given driver, different usecases may require
 * different buffer designs (space efficiency vs speed for example).
 *
 * It is worth noting that a given buffer implementation may only support a
 * small proportion of these functions.  The core code 'should' cope fine with
 * any of them not existing.
 **/
struct iio_buffer_access_funcs {
	int (*store_to)(struct iio_buffer *buffer, const void *data);
	int (*read)(struct iio_buffer *buffer, size_t n, char __user *buf);
	size_t (*data_available)(struct iio_buffer *buffer);
	int (*remove_from)(struct iio_buffer *buffer, void *data);
	int (*write)(struct iio_buffer *buffer, size_t n, const char __user *buf);
	size_t (*space_available)(struct iio_buffer *buffer);

	int (*request_update)(struct iio_buffer *buffer);

	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
	int (*set_length)(struct iio_buffer *buffer, unsigned int length);

	int (*enable)(struct iio_buffer *buffer, struct iio_dev *indio_dev);
	int (*disable)(struct iio_buffer *buffer, struct iio_dev *indio_dev);

	void (*release)(struct iio_buffer *buffer);

	struct iio_dma_buffer_block * (*attach_dmabuf)(struct iio_buffer *buffer,
						       struct dma_buf_attachment *attach);
	void (*detach_dmabuf)(struct iio_buffer *buffer,
			      struct iio_dma_buffer_block *block);
	int (*enqueue_dmabuf)(struct iio_buffer *buffer,
			      struct iio_dma_buffer_block *block,
			      struct dma_fence *fence, struct sg_table *sgt,
			      size_t size, bool cyclic);
	struct device * (*get_dma_dev)(struct iio_buffer *buffer);
	void (*lock_queue)(struct iio_buffer *buffer);
	void (*unlock_queue)(struct iio_buffer *buffer);

	unsigned int modes;
	unsigned int flags;
};

/**
 * struct iio_buffer - general buffer structure
 *
 * Note that the internals of this structure should only be of interest to
 * those writing new buffer implementations.
 */
struct iio_buffer {
	/** @length: Number of datums in buffer. */
	unsigned int length;

	/** @flags: File ops flags including busy flag. */
	unsigned long flags;

	/**  @bytes_per_datum: Size of individual datum including timestamp. */
	size_t bytes_per_datum;

	/* @direction: Direction of the data stream (in/out). */
	enum iio_buffer_direction direction;

	/**
	 * @access: Buffer access functions associated with the
	 * implementation.
	 */
	const struct iio_buffer_access_funcs *access;

	/** @scan_mask: Bitmask used in masking scan mode elements. */
	long *scan_mask;

	/** @demux_list: List of operations required to demux the scan. */
	struct list_head demux_list;

	/** @pollq: Wait queue to allow for polling on the buffer. */
	wait_queue_head_t pollq;

	/** @watermark: Number of datums to wait for poll/read. */
	unsigned int watermark;

	/* private: */
	/* @scan_timestamp: Does the scan mode include a timestamp. */
	bool scan_timestamp;

	/* @buffer_attr_list: List of buffer attributes. */
	struct list_head buffer_attr_list;

	/*
	 * @buffer_group: Attributes of the new buffer group.
	 * Includes scan elements attributes.
	 */
	struct attribute_group buffer_group;

	/* @attrs: Standard attributes of the buffer. */
	const struct iio_dev_attr **attrs;

	/* @demux_bounce: Buffer for doing gather from incoming scan. */
	void *demux_bounce;

	/* @attached_entry: Entry in the devices list of buffers attached by the driver. */
	struct list_head attached_entry;

	/* @buffer_list: Entry in the devices list of current buffers. */
	struct list_head buffer_list;

	/* @ref: Reference count of the buffer. */
	struct kref ref;

	/* @dmabufs: List of DMABUF attachments */
	struct list_head dmabufs; /* P: dmabufs_mutex */

	/* @dmabufs_mutex: Protects dmabufs */
	struct mutex dmabufs_mutex;
};

/**
 * iio_update_buffers() - add or remove buffer from active list
 * @indio_dev:		device to add buffer to
 * @insert_buffer:	buffer to insert
 * @remove_buffer:	buffer_to_remove
 *
 * Note this will tear down the all buffering and build it up again
 */
int iio_update_buffers(struct iio_dev *indio_dev,
		       struct iio_buffer *insert_buffer,
		       struct iio_buffer *remove_buffer);

/**
 * iio_buffer_init() - Initialize the buffer structure
 * @buffer:		buffer to be initialized
 **/
void iio_buffer_init(struct iio_buffer *buffer);

struct iio_buffer *iio_buffer_get(struct iio_buffer *buffer);
void iio_buffer_put(struct iio_buffer *buffer);

void iio_buffer_signal_dmabuf_done(struct dma_fence *fence, int ret);

#else /* CONFIG_IIO_BUFFER */

static inline void iio_buffer_get(struct iio_buffer *buffer) {}
static inline void iio_buffer_put(struct iio_buffer *buffer) {}

#endif /* CONFIG_IIO_BUFFER */
#endif /* _IIO_BUFFER_GENERIC_IMPL_H_ */