Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Nicholas Piggin | 1585 | 89.40% | 22 | 42.31% |
Laurent Dufour | 60 | 3.38% | 1 | 1.92% |
Anton Blanchard | 35 | 1.97% | 3 | 5.77% |
Thomas Gleixner | 24 | 1.35% | 3 | 5.77% |
Michael Ellerman | 20 | 1.13% | 3 | 5.77% |
Nathan T. Lynch | 9 | 0.51% | 1 | 1.92% |
Paul Mackerras | 6 | 0.34% | 3 | 5.77% |
Alexander Graf | 5 | 0.28% | 2 | 3.85% |
Benjamin Herrenschmidt | 4 | 0.23% | 2 | 3.85% |
Andrew Morton | 3 | 0.17% | 1 | 1.92% |
Cédric Le Goater | 3 | 0.17% | 1 | 1.92% |
Paul Gortmaker | 3 | 0.17% | 1 | 1.92% |
Sudeep Holla | 3 | 0.17% | 1 | 1.92% |
Jens Axboe | 3 | 0.17% | 1 | 1.92% |
Hollis Blanchard | 2 | 0.11% | 1 | 1.92% |
Arnaldo Carvalho de Melo | 2 | 0.11% | 1 | 1.92% |
Zwane Mwaikambo | 2 | 0.11% | 1 | 1.92% |
Srivatsa S. Bhat | 1 | 0.06% | 1 | 1.92% |
Julia Lawall | 1 | 0.06% | 1 | 1.92% |
Tejun Heo | 1 | 0.06% | 1 | 1.92% |
Greg Kroah-Hartman | 1 | 0.06% | 1 | 1.92% |
Total | 1773 | 52 |
// SPDX-License-Identifier: GPL-2.0 /* * Watchdog support on powerpc systems. * * Copyright 2017, IBM Corporation. * * This uses code from arch/sparc/kernel/nmi.c and kernel/watchdog.c */ #define pr_fmt(fmt) "watchdog: " fmt #include <linux/kernel.h> #include <linux/param.h> #include <linux/init.h> #include <linux/percpu.h> #include <linux/cpu.h> #include <linux/nmi.h> #include <linux/module.h> #include <linux/export.h> #include <linux/kprobes.h> #include <linux/hardirq.h> #include <linux/reboot.h> #include <linux/slab.h> #include <linux/kdebug.h> #include <linux/sched/debug.h> #include <linux/delay.h> #include <linux/processor.h> #include <linux/smp.h> #include <asm/interrupt.h> #include <asm/paca.h> #include <asm/nmi.h> /* * The powerpc watchdog ensures that each CPU is able to service timers. * The watchdog sets up a simple timer on each CPU to run once per timer * period, and updates a per-cpu timestamp and a "pending" cpumask. This is * the heartbeat. * * Then there are two systems to check that the heartbeat is still running. * The local soft-NMI, and the SMP checker. * * The soft-NMI checker can detect lockups on the local CPU. When interrupts * are disabled with local_irq_disable(), platforms that use soft-masking * can leave hardware interrupts enabled and handle them with a masked * interrupt handler. The masked handler can send the timer interrupt to the * watchdog's soft_nmi_interrupt(), which appears to Linux as an NMI * interrupt, and can be used to detect CPUs stuck with IRQs disabled. * * The soft-NMI checker will compare the heartbeat timestamp for this CPU * with the current time, and take action if the difference exceeds the * watchdog threshold. * * The limitation of the soft-NMI watchdog is that it does not work when * interrupts are hard disabled or otherwise not being serviced. This is * solved by also having a SMP watchdog where all CPUs check all other * CPUs heartbeat. * * The SMP checker can detect lockups on other CPUs. A global "pending" * cpumask is kept, containing all CPUs which enable the watchdog. Each * CPU clears their pending bit in their heartbeat timer. When the bitmask * becomes empty, the last CPU to clear its pending bit updates a global * timestamp and refills the pending bitmask. * * In the heartbeat timer, if any CPU notices that the global timestamp has * not been updated for a period exceeding the watchdog threshold, then it * means the CPU(s) with their bit still set in the pending mask have had * their heartbeat stop, and action is taken. * * Some platforms implement true NMI IPIs, which can be used by the SMP * watchdog to detect an unresponsive CPU and pull it out of its stuck * state with the NMI IPI, to get crash/debug data from it. This way the * SMP watchdog can detect hardware interrupts off lockups. */ static cpumask_t wd_cpus_enabled __read_mostly; static u64 wd_panic_timeout_tb __read_mostly; /* timebase ticks until panic */ static u64 wd_smp_panic_timeout_tb __read_mostly; /* panic other CPUs */ static u64 wd_timer_period_ms __read_mostly; /* interval between heartbeat */ static DEFINE_PER_CPU(struct hrtimer, wd_hrtimer); static DEFINE_PER_CPU(u64, wd_timer_tb); /* SMP checker bits */ static unsigned long __wd_smp_lock; static unsigned long __wd_reporting; static unsigned long __wd_nmi_output; static cpumask_t wd_smp_cpus_pending; static cpumask_t wd_smp_cpus_stuck; static u64 wd_smp_last_reset_tb; #ifdef CONFIG_PPC_PSERIES static u64 wd_timeout_pct; #endif /* * Try to take the exclusive watchdog action / NMI IPI / printing lock. * wd_smp_lock must be held. If this fails, we should return and wait * for the watchdog to kick in again (or another CPU to trigger it). * * Importantly, if hardlockup_panic is set, wd_try_report failure should * not delay the panic, because whichever other CPU is reporting will * call panic. */ static bool wd_try_report(void) { if (__wd_reporting) return false; __wd_reporting = 1; return true; } /* End printing after successful wd_try_report. wd_smp_lock not required. */ static void wd_end_reporting(void) { smp_mb(); /* End printing "critical section" */ WARN_ON_ONCE(__wd_reporting == 0); WRITE_ONCE(__wd_reporting, 0); } static inline void wd_smp_lock(unsigned long *flags) { /* * Avoid locking layers if possible. * This may be called from low level interrupt handlers at some * point in future. */ raw_local_irq_save(*flags); hard_irq_disable(); /* Make it soft-NMI safe */ while (unlikely(test_and_set_bit_lock(0, &__wd_smp_lock))) { raw_local_irq_restore(*flags); spin_until_cond(!test_bit(0, &__wd_smp_lock)); raw_local_irq_save(*flags); hard_irq_disable(); } } static inline void wd_smp_unlock(unsigned long *flags) { clear_bit_unlock(0, &__wd_smp_lock); raw_local_irq_restore(*flags); } static void wd_lockup_ipi(struct pt_regs *regs) { int cpu = raw_smp_processor_id(); u64 tb = get_tb(); pr_emerg("CPU %d Hard LOCKUP\n", cpu); pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n", cpu, tb, per_cpu(wd_timer_tb, cpu), tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000); print_modules(); print_irqtrace_events(current); if (regs) show_regs(regs); else dump_stack(); /* * __wd_nmi_output must be set after we printk from NMI context. * * printk from NMI context defers printing to the console to irq_work. * If that NMI was taken in some code that is hard-locked, then irqs * are disabled so irq_work will never fire. That can result in the * hard lockup messages being delayed (indefinitely, until something * else kicks the console drivers). * * Setting __wd_nmi_output will cause another CPU to notice and kick * the console drivers for us. * * xchg is not needed here (it could be a smp_mb and store), but xchg * gives the memory ordering and atomicity required. */ xchg(&__wd_nmi_output, 1); /* Do not panic from here because that can recurse into NMI IPI layer */ } static bool set_cpu_stuck(int cpu) { cpumask_set_cpu(cpu, &wd_smp_cpus_stuck); cpumask_clear_cpu(cpu, &wd_smp_cpus_pending); /* * See wd_smp_clear_cpu_pending() */ smp_mb(); if (cpumask_empty(&wd_smp_cpus_pending)) { wd_smp_last_reset_tb = get_tb(); cpumask_andnot(&wd_smp_cpus_pending, &wd_cpus_enabled, &wd_smp_cpus_stuck); return true; } return false; } static void watchdog_smp_panic(int cpu) { static cpumask_t wd_smp_cpus_ipi; // protected by reporting unsigned long flags; u64 tb, last_reset; int c; wd_smp_lock(&flags); /* Double check some things under lock */ tb = get_tb(); last_reset = wd_smp_last_reset_tb; if ((s64)(tb - last_reset) < (s64)wd_smp_panic_timeout_tb) goto out; if (cpumask_test_cpu(cpu, &wd_smp_cpus_pending)) goto out; if (!wd_try_report()) goto out; for_each_online_cpu(c) { if (!cpumask_test_cpu(c, &wd_smp_cpus_pending)) continue; if (c == cpu) continue; // should not happen __cpumask_set_cpu(c, &wd_smp_cpus_ipi); if (set_cpu_stuck(c)) break; } if (cpumask_empty(&wd_smp_cpus_ipi)) { wd_end_reporting(); goto out; } wd_smp_unlock(&flags); pr_emerg("CPU %d detected hard LOCKUP on other CPUs %*pbl\n", cpu, cpumask_pr_args(&wd_smp_cpus_ipi)); pr_emerg("CPU %d TB:%lld, last SMP heartbeat TB:%lld (%lldms ago)\n", cpu, tb, last_reset, tb_to_ns(tb - last_reset) / 1000000); if (!sysctl_hardlockup_all_cpu_backtrace) { /* * Try to trigger the stuck CPUs, unless we are going to * get a backtrace on all of them anyway. */ for_each_cpu(c, &wd_smp_cpus_ipi) { smp_send_nmi_ipi(c, wd_lockup_ipi, 1000000); __cpumask_clear_cpu(c, &wd_smp_cpus_ipi); } } else { trigger_allbutself_cpu_backtrace(); cpumask_clear(&wd_smp_cpus_ipi); } if (hardlockup_panic) nmi_panic(NULL, "Hard LOCKUP"); wd_end_reporting(); return; out: wd_smp_unlock(&flags); } static void wd_smp_clear_cpu_pending(int cpu) { if (!cpumask_test_cpu(cpu, &wd_smp_cpus_pending)) { if (unlikely(cpumask_test_cpu(cpu, &wd_smp_cpus_stuck))) { struct pt_regs *regs = get_irq_regs(); unsigned long flags; pr_emerg("CPU %d became unstuck TB:%lld\n", cpu, get_tb()); print_irqtrace_events(current); if (regs) show_regs(regs); else dump_stack(); wd_smp_lock(&flags); cpumask_clear_cpu(cpu, &wd_smp_cpus_stuck); wd_smp_unlock(&flags); } else { /* * The last CPU to clear pending should have reset the * watchdog so we generally should not find it empty * here if our CPU was clear. However it could happen * due to a rare race with another CPU taking the * last CPU out of the mask concurrently. * * We can't add a warning for it. But just in case * there is a problem with the watchdog that is causing * the mask to not be reset, try to kick it along here. */ if (unlikely(cpumask_empty(&wd_smp_cpus_pending))) goto none_pending; } return; } /* * All other updates to wd_smp_cpus_pending are performed under * wd_smp_lock. All of them are atomic except the case where the * mask becomes empty and is reset. This will not happen here because * cpu was tested to be in the bitmap (above), and a CPU only clears * its own bit. _Except_ in the case where another CPU has detected a * hard lockup on our CPU and takes us out of the pending mask. So in * normal operation there will be no race here, no problem. * * In the lockup case, this atomic clear-bit vs a store that refills * other bits in the accessed word wll not be a problem. The bit clear * is atomic so it will not cause the store to get lost, and the store * will never set this bit so it will not overwrite the bit clear. The * only way for a stuck CPU to return to the pending bitmap is to * become unstuck itself. */ cpumask_clear_cpu(cpu, &wd_smp_cpus_pending); /* * Order the store to clear pending with the load(s) to check all * words in the pending mask to check they are all empty. This orders * with the same barrier on another CPU. This prevents two CPUs * clearing the last 2 pending bits, but neither seeing the other's * store when checking if the mask is empty, and missing an empty * mask, which ends with a false positive. */ smp_mb(); if (cpumask_empty(&wd_smp_cpus_pending)) { unsigned long flags; none_pending: /* * Double check under lock because more than one CPU could see * a clear mask with the lockless check after clearing their * pending bits. */ wd_smp_lock(&flags); if (cpumask_empty(&wd_smp_cpus_pending)) { wd_smp_last_reset_tb = get_tb(); cpumask_andnot(&wd_smp_cpus_pending, &wd_cpus_enabled, &wd_smp_cpus_stuck); } wd_smp_unlock(&flags); } } static void watchdog_timer_interrupt(int cpu) { u64 tb = get_tb(); per_cpu(wd_timer_tb, cpu) = tb; wd_smp_clear_cpu_pending(cpu); if ((s64)(tb - wd_smp_last_reset_tb) >= (s64)wd_smp_panic_timeout_tb) watchdog_smp_panic(cpu); if (__wd_nmi_output && xchg(&__wd_nmi_output, 0)) { /* * Something has called printk from NMI context. It might be * stuck, so this triggers a flush that will get that * printk output to the console. * * See wd_lockup_ipi. */ printk_trigger_flush(); } } DEFINE_INTERRUPT_HANDLER_NMI(soft_nmi_interrupt) { unsigned long flags; int cpu = raw_smp_processor_id(); u64 tb; /* should only arrive from kernel, with irqs disabled */ WARN_ON_ONCE(!arch_irq_disabled_regs(regs)); if (!cpumask_test_cpu(cpu, &wd_cpus_enabled)) return 0; __this_cpu_inc(irq_stat.soft_nmi_irqs); tb = get_tb(); if (tb - per_cpu(wd_timer_tb, cpu) >= wd_panic_timeout_tb) { /* * Taking wd_smp_lock here means it is a soft-NMI lock, which * means we can't take any regular or irqsafe spin locks while * holding this lock. This is why timers can't printk while * holding the lock. */ wd_smp_lock(&flags); if (cpumask_test_cpu(cpu, &wd_smp_cpus_stuck)) { wd_smp_unlock(&flags); return 0; } if (!wd_try_report()) { wd_smp_unlock(&flags); /* Couldn't report, try again in 100ms */ mtspr(SPRN_DEC, 100 * tb_ticks_per_usec * 1000); return 0; } set_cpu_stuck(cpu); wd_smp_unlock(&flags); pr_emerg("CPU %d self-detected hard LOCKUP @ %pS\n", cpu, (void *)regs->nip); pr_emerg("CPU %d TB:%lld, last heartbeat TB:%lld (%lldms ago)\n", cpu, tb, per_cpu(wd_timer_tb, cpu), tb_to_ns(tb - per_cpu(wd_timer_tb, cpu)) / 1000000); print_modules(); print_irqtrace_events(current); show_regs(regs); xchg(&__wd_nmi_output, 1); // see wd_lockup_ipi if (sysctl_hardlockup_all_cpu_backtrace) trigger_allbutself_cpu_backtrace(); if (hardlockup_panic) nmi_panic(regs, "Hard LOCKUP"); wd_end_reporting(); } /* * We are okay to change DEC in soft_nmi_interrupt because the masked * handler has marked a DEC as pending, so the timer interrupt will be * replayed as soon as local irqs are enabled again. */ if (wd_panic_timeout_tb < 0x7fffffff) mtspr(SPRN_DEC, wd_panic_timeout_tb); return 0; } static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) { int cpu = smp_processor_id(); if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) return HRTIMER_NORESTART; if (!cpumask_test_cpu(cpu, &watchdog_cpumask)) return HRTIMER_NORESTART; watchdog_timer_interrupt(cpu); hrtimer_forward_now(hrtimer, ms_to_ktime(wd_timer_period_ms)); return HRTIMER_RESTART; } void arch_touch_nmi_watchdog(void) { unsigned long ticks = tb_ticks_per_usec * wd_timer_period_ms * 1000; int cpu = smp_processor_id(); u64 tb; if (!cpumask_test_cpu(cpu, &watchdog_cpumask)) return; tb = get_tb(); if (tb - per_cpu(wd_timer_tb, cpu) >= ticks) { per_cpu(wd_timer_tb, cpu) = tb; wd_smp_clear_cpu_pending(cpu); } } EXPORT_SYMBOL(arch_touch_nmi_watchdog); static void start_watchdog(void *arg) { struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer); int cpu = smp_processor_id(); unsigned long flags; if (cpumask_test_cpu(cpu, &wd_cpus_enabled)) { WARN_ON(1); return; } if (!(watchdog_enabled & NMI_WATCHDOG_ENABLED)) return; if (!cpumask_test_cpu(cpu, &watchdog_cpumask)) return; wd_smp_lock(&flags); cpumask_set_cpu(cpu, &wd_cpus_enabled); if (cpumask_weight(&wd_cpus_enabled) == 1) { cpumask_set_cpu(cpu, &wd_smp_cpus_pending); wd_smp_last_reset_tb = get_tb(); } wd_smp_unlock(&flags); *this_cpu_ptr(&wd_timer_tb) = get_tb(); hrtimer_init(hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer->function = watchdog_timer_fn; hrtimer_start(hrtimer, ms_to_ktime(wd_timer_period_ms), HRTIMER_MODE_REL_PINNED); } static int start_watchdog_on_cpu(unsigned int cpu) { return smp_call_function_single(cpu, start_watchdog, NULL, true); } static void stop_watchdog(void *arg) { struct hrtimer *hrtimer = this_cpu_ptr(&wd_hrtimer); int cpu = smp_processor_id(); unsigned long flags; if (!cpumask_test_cpu(cpu, &wd_cpus_enabled)) return; /* Can happen in CPU unplug case */ hrtimer_cancel(hrtimer); wd_smp_lock(&flags); cpumask_clear_cpu(cpu, &wd_cpus_enabled); wd_smp_unlock(&flags); wd_smp_clear_cpu_pending(cpu); } static int stop_watchdog_on_cpu(unsigned int cpu) { return smp_call_function_single(cpu, stop_watchdog, NULL, true); } static void watchdog_calc_timeouts(void) { u64 threshold = watchdog_thresh; #ifdef CONFIG_PPC_PSERIES threshold += (READ_ONCE(wd_timeout_pct) * threshold) / 100; #endif wd_panic_timeout_tb = threshold * ppc_tb_freq; /* Have the SMP detector trigger a bit later */ wd_smp_panic_timeout_tb = wd_panic_timeout_tb * 3 / 2; /* 2/5 is the factor that the perf based detector uses */ wd_timer_period_ms = watchdog_thresh * 1000 * 2 / 5; } void watchdog_nmi_stop(void) { int cpu; for_each_cpu(cpu, &wd_cpus_enabled) stop_watchdog_on_cpu(cpu); } void watchdog_nmi_start(void) { int cpu; watchdog_calc_timeouts(); for_each_cpu_and(cpu, cpu_online_mask, &watchdog_cpumask) start_watchdog_on_cpu(cpu); } /* * Invoked from core watchdog init. */ int __init watchdog_nmi_probe(void) { int err; err = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "powerpc/watchdog:online", start_watchdog_on_cpu, stop_watchdog_on_cpu); if (err < 0) { pr_warn("could not be initialized"); return err; } return 0; } #ifdef CONFIG_PPC_PSERIES void watchdog_nmi_set_timeout_pct(u64 pct) { pr_info("Set the NMI watchdog timeout factor to %llu%%\n", pct); WRITE_ONCE(wd_timeout_pct, pct); lockup_detector_reconfigure(); } #endif
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1