| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Paul Mundt | 497 | 55.16% | 25 | 47.17% |
| Andrew Morton | 257 | 28.52% | 3 | 5.66% |
| Linus Torvalds (pre-git) | 49 | 5.44% | 10 | 18.87% |
| Richard Curnow | 31 | 3.44% | 1 | 1.89% |
| Rich Felker | 20 | 2.22% | 2 | 3.77% |
| Kuninori Morimoto | 19 | 2.11% | 2 | 3.77% |
| Linus Torvalds | 12 | 1.33% | 3 | 5.66% |
| Yoshinori Sato | 5 | 0.55% | 1 | 1.89% |
| Stuart Menefy | 4 | 0.44% | 2 | 3.77% |
| David Howells | 3 | 0.33% | 1 | 1.89% |
| Geert Uytterhoeven | 2 | 0.22% | 1 | 1.89% |
| Andrea Arcangeli | 1 | 0.11% | 1 | 1.89% |
| Paul Gortmaker | 1 | 0.11% | 1 | 1.89% |
| Total | 901 | 53 |
// SPDX-License-Identifier: GPL-2.0 /* * arch/sh/kernel/cpu/init.c * * CPU init code * * Copyright (C) 2002 - 2009 Paul Mundt * Copyright (C) 2003 Richard Curnow */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/log2.h> #include <asm/mmu_context.h> #include <asm/processor.h> #include <linux/uaccess.h> #include <asm/page.h> #include <asm/cacheflush.h> #include <asm/cache.h> #include <asm/elf.h> #include <asm/io.h> #include <asm/smp.h> #include <asm/sh_bios.h> #include <asm/setup.h> #ifdef CONFIG_SH_FPU #define cpu_has_fpu 1 #else #define cpu_has_fpu 0 #endif #ifdef CONFIG_SH_DSP #define cpu_has_dsp 1 #else #define cpu_has_dsp 0 #endif /* * Generic wrapper for command line arguments to disable on-chip * peripherals (nofpu, nodsp, and so forth). */ #define onchip_setup(x) \ static int x##_disabled = !cpu_has_##x; \ \ static int x##_setup(char *opts) \ { \ x##_disabled = 1; \ return 1; \ } \ __setup("no" __stringify(x), x##_setup); onchip_setup(fpu); onchip_setup(dsp); #ifdef CONFIG_SPECULATIVE_EXECUTION #define CPUOPM 0xff2f0000 #define CPUOPM_RABD (1 << 5) static void speculative_execution_init(void) { /* Clear RABD */ __raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM); /* Flush the update */ (void)__raw_readl(CPUOPM); ctrl_barrier(); } #else #define speculative_execution_init() do { } while (0) #endif #ifdef CONFIG_CPU_SH4A #define EXPMASK 0xff2f0004 #define EXPMASK_RTEDS (1 << 0) #define EXPMASK_BRDSSLP (1 << 1) #define EXPMASK_MMCAW (1 << 4) static void expmask_init(void) { unsigned long expmask = __raw_readl(EXPMASK); /* * Future proofing. * * Disable support for slottable sleep instruction, non-nop * instructions in the rte delay slot, and associative writes to * the memory-mapped cache array. */ expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW); __raw_writel(expmask, EXPMASK); ctrl_barrier(); } #else #define expmask_init() do { } while (0) #endif /* 2nd-level cache init */ void __attribute__ ((weak)) l2_cache_init(void) { } /* * Generic first-level cache init */ #if !defined(CONFIG_CPU_J2) static void cache_init(void) { unsigned long ccr, flags; jump_to_uncached(); ccr = __raw_readl(SH_CCR); /* * At this point we don't know whether the cache is enabled or not - a * bootloader may have enabled it. There are at least 2 things that * could be dirty in the cache at this point: * 1. kernel command line set up by boot loader * 2. spilled registers from the prolog of this function * => before re-initialising the cache, we must do a purge of the whole * cache out to memory for safety. As long as nothing is spilled * during the loop to lines that have already been done, this is safe. * - RPC */ if (ccr & CCR_CACHE_ENABLE) { unsigned long ways, waysize, addrstart; waysize = current_cpu_data.dcache.sets; #ifdef CCR_CACHE_ORA /* * If the OC is already in RAM mode, we only have * half of the entries to flush.. */ if (ccr & CCR_CACHE_ORA) waysize >>= 1; #endif waysize <<= current_cpu_data.dcache.entry_shift; #ifdef CCR_CACHE_EMODE /* If EMODE is not set, we only have 1 way to flush. */ if (!(ccr & CCR_CACHE_EMODE)) ways = 1; else #endif ways = current_cpu_data.dcache.ways; addrstart = CACHE_OC_ADDRESS_ARRAY; do { unsigned long addr; for (addr = addrstart; addr < addrstart + waysize; addr += current_cpu_data.dcache.linesz) __raw_writel(0, addr); addrstart += current_cpu_data.dcache.way_incr; } while (--ways); } /* * Default CCR values .. enable the caches * and invalidate them immediately.. */ flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE; #ifdef CCR_CACHE_EMODE /* Force EMODE if possible */ if (current_cpu_data.dcache.ways > 1) flags |= CCR_CACHE_EMODE; else flags &= ~CCR_CACHE_EMODE; #endif #if defined(CONFIG_CACHE_WRITETHROUGH) /* Write-through */ flags |= CCR_CACHE_WT; #elif defined(CONFIG_CACHE_WRITEBACK) /* Write-back */ flags |= CCR_CACHE_CB; #else /* Off */ flags &= ~CCR_CACHE_ENABLE; #endif l2_cache_init(); __raw_writel(flags, SH_CCR); back_to_cached(); } #else #define cache_init() do { } while (0) #endif #define CSHAPE(totalsize, linesize, assoc) \ ((totalsize & ~0xff) | (linesize << 4) | assoc) #define CACHE_DESC_SHAPE(desc) \ CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways) static void detect_cache_shape(void) { l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache); if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED) l1i_cache_shape = l1d_cache_shape; else l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache); if (current_cpu_data.flags & CPU_HAS_L2_CACHE) l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache); else l2_cache_shape = -1; /* No S-cache */ } static void fpu_init(void) { /* Disable the FPU */ if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) { printk("FPU Disabled\n"); current_cpu_data.flags &= ~CPU_HAS_FPU; } disable_fpu(); clear_used_math(); } #ifdef CONFIG_SH_DSP static void release_dsp(void) { unsigned long sr; /* Clear SR.DSP bit */ __asm__ __volatile__ ( "stc\tsr, %0\n\t" "and\t%1, %0\n\t" "ldc\t%0, sr\n\t" : "=&r" (sr) : "r" (~SR_DSP) ); } static void dsp_init(void) { unsigned long sr; /* * Set the SR.DSP bit, wait for one instruction, and then read * back the SR value. */ __asm__ __volatile__ ( "stc\tsr, %0\n\t" "or\t%1, %0\n\t" "ldc\t%0, sr\n\t" "nop\n\t" "stc\tsr, %0\n\t" : "=&r" (sr) : "r" (SR_DSP) ); /* If the DSP bit is still set, this CPU has a DSP */ if (sr & SR_DSP) current_cpu_data.flags |= CPU_HAS_DSP; /* Disable the DSP */ if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) { printk("DSP Disabled\n"); current_cpu_data.flags &= ~CPU_HAS_DSP; } /* Now that we've determined the DSP status, clear the DSP bit. */ release_dsp(); } #else static inline void dsp_init(void) { } #endif /* CONFIG_SH_DSP */ /** * cpu_init * * This is our initial entry point for each CPU, and is invoked on the * boot CPU prior to calling start_kernel(). For SMP, a combination of * this and start_secondary() will bring up each processor to a ready * state prior to hand forking the idle loop. * * We do all of the basic processor init here, including setting up * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and * subsequently platform_setup()) things like determining the CPU * subtype and initial configuration will all be done. * * Each processor family is still responsible for doing its own probing * and cache configuration in cpu_probe(). */ asmlinkage void cpu_init(void) { current_thread_info()->cpu = hard_smp_processor_id(); /* First, probe the CPU */ cpu_probe(); if (current_cpu_data.type == CPU_SH_NONE) panic("Unknown CPU"); /* First setup the rest of the I-cache info */ current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - current_cpu_data.icache.linesz; current_cpu_data.icache.way_size = current_cpu_data.icache.sets * current_cpu_data.icache.linesz; /* And the D-cache too */ current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - current_cpu_data.dcache.linesz; current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * current_cpu_data.dcache.linesz; /* Init the cache */ cache_init(); if (raw_smp_processor_id() == 0) { #ifdef CONFIG_MMU shm_align_mask = max_t(unsigned long, current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); #else shm_align_mask = PAGE_SIZE - 1; #endif /* Boot CPU sets the cache shape */ detect_cache_shape(); } fpu_init(); dsp_init(); /* * Initialize the per-CPU ASID cache very early, since the * TLB flushing routines depend on this being setup. */ current_cpu_data.asid_cache = NO_CONTEXT; current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32; speculative_execution_init(); expmask_init(); /* Do the rest of the boot processor setup */ if (raw_smp_processor_id() == 0) { /* Save off the BIOS VBR, if there is one */ sh_bios_vbr_init(); /* * Setup VBR for boot CPU. Secondary CPUs do this through * start_secondary(). */ per_cpu_trap_init(); /* * Boot processor to setup the FP and extended state * context info. */ init_thread_xstate(); } }
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1